带筋整体壁板预应力喷丸成形数值模拟及变形预测

带筋整体壁板特别是高筋整体壁板具有优异的结构效率、减重效益和密封效果,在航空航天等领域备受青睐。预应力喷丸成形是大中型、长寿命、高性能复杂带筋整体壁板的一种不可多得的有效成形手段。数值模拟是促进带筋整体壁板预应力喷丸成形技术研究、进步与应用的一种极具潜力的途径。针对带筋整体壁板预应力喷丸成形数值模拟,建立了基于响应面函数的多弹丸撞击有限元模型、基于应变中性层内移的反弯曲应力场法模拟模型、预应力喷丸成形RBF神经网络预测模型,实现了喷丸成形应力场法数值模拟、预应力喷丸成形较高精度数值模拟与变形预测,为带筋整体壁板预应力喷丸成形技术研究和实际应用提供了一种更为便捷、高效、经济的途径。     

Design and Optimization of Press Bend Forming Path for Producing Aircraft Integral Panels with Compound Curvatures

In order to find out the optimal press bend forming path in fabricating aircraft integral panels, this article proposes a new method on the basis of the authors' previous work. It is composed of the finite element method (FEM) equivalent model, the surface curvature analysis, the artificial neural network response surface and the genetic algorithm. The method begins with analyzing the objective's shape curvature to determine the bending position. Then it optimizes the punch travel at each bending position by the following steps: (1) Establish a multi-step press bend forming FEM equivalent model, with which the FEM experiments designed with the Taguchi method are performed. (2) Construct a back-propagation (BP) neural network response surface with the data from the FEM experiments. (3) Use the genetic algorithm to optimize the neural network response surface as the objective function. Finally, this method is verified by press bending a complicated double-curvature grid-type stiffened panel and bears out its effectiveness and intrinsic worth in designing the press bend forming path.     

A progressive approach to predict shot peening process parameters for forming integral panel of Al7050-T7451

In this paper, a progressive approach to predict the multiple shot peening process parameters for complex integral panel is proposed. Firstly, the invariable parameters in the forming process including shot size, mass flow, peening distance and peening angle are determined according to the empirical and machine type. Then, the optimal value of air pressure for the whole shot peening is selected by the experimental data. Finally, the feeding speed for every shot peening path is predicted by regression equation. The integral panel part with thickness from 2 mm to 5 mm and curvature radius from 3200 mm to 16000 mm is taken as a research object, and four experiments are conducted. In order to design specimens for acquiring the forming data, one experiment is conducted to compare the curvature radius of the plate and stringer-structural specimens, which were peened along the middle of the two stringers. The most striking finding of this experiment is that the outer shape error range is below 3.9%, so the plate specimens can be used in predicting feeding speed of the integral panel. The second experiment is performed and results show that when the coverage reaches the limit of 80%, the minimum feeding speed is 50 mm/s. By this feeding speed, the forming curvature radius of the specimens with different thickness from the third experiment is measured and compared with the research object, and the optimal air pressure is 0.15 MPa. Then, the plate specimens with thickness from 2 mm to 5 mm are peened in the fourth experiment, and the measured curvature radius data are used to calculate the feeding speed of different shot peening path by regressive analysis method. The algorithm is validated by forming a test part and the average deviation is 0.496 mm. It is shown that the approach can realize the forming of the integral panel precisely.     

整体壁板激光辅助预应力成形

整体壁板成形是大飞机制造的关键难题之一。本文探索了激光辅助预应力成形方法应用于整体壁板这一类筋条加强结构工件的可行性。该方法的原理是：首先对整体壁板施加弹性载荷,然后用激光束扫描并加热其弹性变形能集中区域,通过降低该区域材料的屈服极限促使弹性变形能转化为塑性功,实现整体壁板的塑性成形。对网格筋条加强结构试件进行了激光辅助预应力成形试验和有限元分析以及时效成形试验,验证了激光辅助预应力成形方法的可行性,并讨论了激光扫描道次与工件成形效率的关系。     

A toolpath strategy for improving geometric accuracy in double-sided incremental sheet forming

The double-sided incremental forming (DSIF) improved the process flexibility compared to other incremental sheet forming (ISF) processes. Despite the flexible nature, it faces the challenge of low geometric precision like ISF variants. In this work, two strategies are used to overcome this. First, a novel method is employed to determine the optimal support tool location for improving geometric precision. In this method, the toolpath oriented the tools to each other systematically in the circumferential direction. Besides, it squeezed the sheet by the same amount at the point of interest. The impacts of various support tool positions in the circumferential direction are evaluated for geometric precision. The results demonstrate that the support tool should support the master tool within 10° to its local normal in the circumferential direction to improve the geometric accuracy. Second, a two-stage process reduced the geometric error of the part by incrementally accommodating the springback error by artificially increasing the step size for the second stage. With the optimal support tool position and two-stage DSIF, the geometric precision of the part has improved significantly. The proposed method is compared to the best DSIF toolpath strategies for geometric accuracy, surface roughness, forming time, and sheet thickness fluctuations using grey relational analysis (GRA). It outperforms the other toolpath strategies including single-stage DSIF, accumulative double-sided incremental forming (ADSIF), and two-stage mixed double sided incremental forming (MDSIF). Our approach can improve geometric precision in complex parts by successfully employing the support tool and managing the springback incrementally.     

整体加筋壁板的破损安全特性与断裂控制分析

用有限元和断裂力学方法分析大型整体机翼下壁板的破损安全特性。对一个九桁条铝合金整体加筋板,裂纹从断裂筋条下向两侧均匀扩展的开裂形式,进行了应力强度因子和剩余强度计算,并和另一个具有相同构形的铆接加筋板的结果进行对比。当裂纹长度在两倍桁条间距以内时两种加筋板的剩余强度水平相当。但是当整体壁板中的裂纹穿过外侧相邻桁条时,整体桁条的止裂能力逐渐减弱。研究对整体壁板蒙皮胶接止裂条的断裂控制措施及有限元建模分析方法,描述止裂条胶层局部脱粘的处理方法和迭代过程。止裂条材料分别选用了钛合金和单向层压复合材料。计算结果说明胶接止裂措施能显著提高整体加筋板的破损安全性能。     

Analysis of the effect of stiffener profile on buckling strength in composite isogrid stiffened shell under axial loading

In this paper, the buckling behavior of thin-walled GFRP cylindrical shells with triangular lattice patterned reinforcements formed by helical and circumferential ribs under axial force is analyzed. In this analysis, various models of composite isogrid stiffened cylindrical shells with outer diameter of 150 millimeters, shell thickness of 0.5 millimeters and height of 280 millimeters, stiffened with 6 helical and 2 circumferential ribs and all with the same material properties of shell and ribs are used. Ribs have constant section areas but different shapes and cross section profiles. The effects of these differences on buckling strengths of structures under axial load are studied. For analysis and modeling of structures, Finite Element Analysis method and ANSYS software were used. The results (elastic buckling load) for each model were derived and based on these results, ratio of buckling strengths to weight parameters were calculated for each model and were compared to results obtained from other models. The effect of profile of the ribs on the buckling of shells under axial loading can be concluded from the results. Results showed that stiffening the shells increased the buckling load from 10% up to 36% while decreased the buckling load to weight ratio to 42% up to 52% of an unstiffened shell.     

Improving the process forming limit considering forming defects in the transitional region in local loading forming of Ti-alloy rib-web components

The isothermal local loading forming technology provides a feasible way to form Ti-alloy large-scale rib-web components in aerospace and aviation fields.However,the local load ing process forming limit is restricted by forming defects in the transitional region.In this work,the feasibility of controlling forming defects and improving the process forming limit by adjusting die parameters is explored through finite element (FE) simulation.It is found that the common cavum and folding defects in the transitional region are significantly influenced by the fillet radii of left rib and middle rib,respectively.The cavum and folding defects can be effectively controlled by increas ing the fillet radii of left rib and middle rib,respectively.The process forming limits considering forming defects in the transitional region are determined by the stepwise searching method under various die parameters.Moreover,the relationship between the process forming limit and die parameters is developed through the response surface methodology (RSM).The developed RSM models suggest that increasing the fillet radii of left and middle ribs is effective to improve the pro cess forming limit during local loading forming of rib-web components.The results will provide technical basis for the design of die parameters and the reduction amount,which is of great impor tance to control forming defects and improve the process forming limit in local loading forming of Ti-alloy large-scale rib-web components.     

含离散源损伤复合材料加筋板的压缩特性

 通过对含有离散源损伤的复合材料加筋板的压缩实验和有限元模拟,研究了离散源损伤的损伤扩展与破坏特性以及对复合材料加筋板剩余强度的影响。 结果表明，复合材料加筋板的离散源损伤用穿透蒙皮切断桁条的切口来模拟是合适的，蒙皮上的穿透切口前端有很高的应变集中，桁条被切断导致加筋板传力路线改变；离散源损伤使复合材料加筋板的压缩强度下降显著，达到60％左右； 基于Hashin失效准则的渐进损伤有限元数值模拟方法，可以有效地模拟含切口加筋板的宏观损伤扩展和破坏过程，计算结果与实验值吻合较好。     

整体壁板压弯成形的形状控制

针对整体壁板压弯成形过程中由于回弹导致的压弯成形精度低和不可控问题,提出整体壁板压弯成形形状控制方法。以铝合金（7050-T7451）机翼整体壁板为研究对象,设计了整体壁板缩比试件模型,基于弹塑性变形理论和几何分析建立了压弯成形局部变形下压量解析预测模型,基于有限元法建立了压弯成形整体变形有限元仿真预测模型,并将模拟结果与实验结果进行了对比;在压弯成形局部-整体变形预测模型的基础上,综合考虑局部-整体变形精度,利用迭代补偿机制与逐步逼近思想,构建了压弯成形轮廓曲线迭代模型。通过与传统的试错法进行对比,研究结果表明所提方法能够以更高的精度、更快的收敛速度有效控制压弯件的成形形状。     

大型机翼整体壁板系统化喷丸成形技术

大型机翼整体壁板是现代大型飞机重要的大型承力整体结构件并且通常直接构成飞机的气动外形。喷丸成形是现代大型轻质高强铝合金整体壁板件成形制造的首选技术方法,但如何实现大型机翼整体壁板的精确喷丸成形一直是现代航空制造技术领域的一个难点问题。针对这一工程问题,本文采用系统化的方法,将影响大型机翼整体壁板喷丸成形精度的因素分解为壁板平面板坯误差、成形参数设计准确度、成形参数控制精度、环境因素。针对这些因素,采用基于变形位能最小的板坯优化设计来减小由板坯导致的成形误差;采用数据拟合、人工神经网络以及解析模型计算相结合的喷丸成形参数综合设计方法来提高喷丸参数设计的精度和效率;建立了板坯修正模型以修正环境温度、喷丸设备参数波动等因素对成形件形状和尺寸的影响;对于从喷丸设备上下线后仍存在的外形贴模误差,则采用手提喷丸机进行局部的渐进式校形喷丸至外形贴模。壁板喷丸成形的工程实践表明,本文所提出的系统化方法能够有效提高大型机翼整体壁板喷丸成形的精度和效率,并可满足工业生产的需求。     

碳纤维/双马树脂复合材料整体成型过程分层扩展行为实验研究

针对复合材料构件热压罐成型过程中常见的分层缺陷,考察了整体成型工艺温度对分层扩展、QY8911双马树脂基体韧性及T300/QY8911层合板Ⅰ型层间断裂韧性的影响,并通过分层扩展断面形貌深入分析了复合材料整体成型工艺中分层扩展的路径和断面破坏模式,给出了复合材料整体成型工艺和结构设计的优化建议措施。结果表明,随着整体成型最高温度的升高,分层扩展程度增大,QY8911双马树脂基体的拉伸强度和拉伸模量逐渐降低,T300/QY8911层合板Ⅰ型层间断裂韧性逐渐增大;对分层扩展断面进行SEM扫描电镜分析发现分层扩展沿着层间开裂,断面内存在基体断裂和基体/纤维界面脱粘两种破坏模式,Ⅰ型层间断裂是复合材料整体成型工艺中分层扩展的典型微观特征。     

整体壁板损伤容限特性与修理技术研究

用有限元和断裂力学方法分析大型飞机机身整体壁板的破损安全特性。以一个十四桁条的铝合金整体加筋板为例,计算了裂纹从中部蒙皮向两侧均匀扩展并跨过筋条的应力强度因子,并和相同构型的铆接壁板进行了结构对比。应用ANSYS对整体壁板及损伤后双面修补壁板进行有限元分析。研究不同厚度补片对损伤壁板、修补长桁、内外补片受力的影响。选取典型位置研究局部刚度加大对整体壁板传力特性的影响。     

双轴应力下含裂纹加筋曲板剩余强度的弹塑性有限元计算

 采用考虑了大应变的弹塑性有限元方法,以裂纹尖端张开角为断裂准则,实现了双向受载条件下加筋曲板中裂纹起裂到失稳整个扩展过程的数值模拟计算;还对与加筋曲板有同样尺寸的加筋平板进行了分析和计算。结果表明,所提出的分析方法和所采用的断裂准则适用于对含裂纹加筋结构所进行的剩余强度分析。     

复合材料加筋壁板长桁蒙皮剥离失效分析

为了研究复合材料加筋壁板在纯弯载荷作用下蒙皮与长桁间的脱胶过程,基于ABAQUS有限元软件中的连续壳单元和Cohesive单元建立了有限元模型。在该模型中,采用Hashin准则预测面内损伤,而对于蒙皮与长桁缘条之间脱胶损伤的起始与扩展,则采用Cohesive单元进行模拟。采用该模型对复合材料加筋壁板蒙皮与长桁在纯弯载荷作用下的破坏过程进行仿真,仿真结果与试验结果相比较表明,本文建立的有限元分析模型能较好地模拟加筋壁板在纯弯载荷作用下蒙皮与长桁间的脱胶过程,并且能较好地预测该结构的剥离强度。     

民用航空含Ω型长桁复合材料加筋壁板制造技术研究

含Ω型长桁的复合材料加筋壁板由于其结构上的优势,在民用大飞机上被越来越多地采用。然而,此种类型的加筋壁板在共固化成型过程中存在Ω型长桁如何加压的问题,特别是在有严格的适航符合性审查要求的民用航空产品制造领域,进一步提高了制造难度。经过多次试验,最终采用薄壁橡胶气囊成型法制造出符合设计要求和适航要求的含Ω型长桁加筋壁板。     

Experimental and numerical investigation on surface quality for two-point incremental sheet forming with interpolator

The unsatisfied surface quality seriously impedes the wide application of incremental sheet forming (ISF) in industrial field. As a novel approach, the interpolator method is a promising strategy to enhance the surface quality in ISF. However, the mechanism for the improvement of surface quality and the influence of interpolator properties on surface roughness are not well understood. In this paper, the influences of process variables (i.e. tool diameter, step size and thickness of interpolators) on the forming process (e.g. surface roughness, forming force and geometric error) are investigated through a systematic experimental approach of central composite design (CCD) in two-point incremental sheet forming (TPIF). It is obtained that the increase in thickness of interpolators decreases the surface roughness in direction vertical to the tool path while increases the surface roughness in direction horizontal to the tool path. Nevertheless, the combined influence between thickness of interpolators and process parameters (tool diameter and step size) is limited. Meanwhile, the placement of interpolator has little influence on the effective forming force of blank. In addition, the geometric error enlarges with the increase of step size and thickness of interpolator while decreases firstly and then increase with an increase in tool diameter. Finally, the influencing mechanism of the interpolator method on surface quality can be attributed to the decrease of the contact pressure due to the increase of contact area with the unchanged contact force. Meanwhile, the interpolator method eliminates the sliding friction on the surface of blank due to the stable relative position between the blank and the interpolator.     

金属加筋壁板蒙皮有效宽度分析方法

民用飞机机身、机翼的壁板、气密框以及翼梁结构为典型的壁板加筋结构,在承受压缩载荷时需考虑成由蒙皮与筋条组成的复合剖面共同承载,其通常为中长柱,工程分析时常取30倍的蒙皮厚度作为蒙皮有效宽度。取30倍的蒙皮厚度作为蒙皮有效宽度存在着一定的保守性,介绍了Von Karman迭代分析方法、有限元分析方法及常用的工程分析方法。在加筋壁板结构的轴压承载能力计算中,蒙皮有效宽度的确定是较为关键的设计因素,对飞机机身、机翼结构效率的提高和重量控制至关重要。随着加工能力的提升,虽然部分壁板结构由组合式逐渐过渡到了整体机加形式,但所述方法仍有一定的借鉴意义,对目前国内外常用的金属加筋壁板有效宽度的工程分析方法进行了研究,并结合有限元分析对工程分析方法进行了验证。     

铝锂合金加筋壁板剪切屈曲性能

为研究剪切载荷下2A97铝锂合金加筋壁板的屈曲与后屈曲行为,设计了加筋壁板和夹具,完成了壁板的剪切试验;得到了加筋壁板的失稳载荷、破坏载荷以及破坏模式;采用受剪板屈曲与张力场理论计算了加筋壁板的剪切屈曲失稳载荷;建立有限元数值计算模型对加筋壁板屈曲行为进行计算分析,并将数值结果与试验结果对比。结果表明：加筋壁板的屈曲模式为筋条间蒙皮的局部屈曲;加筋壁板的破坏模式为沿加载对角线方向蒙皮的凸起,破坏原因为蒙皮的塑性变形、撕裂以及筋条的扭转变形;利用张力场理论可以得到较准确的屈曲失稳载荷,与试验误差为6.56%;数值模拟得到的屈曲与破坏模式与试验吻合,失稳载荷和极限载荷与试验结果误差分别为1.22%和11.52%。     

铆接加筋板应力强度因子计算中几个问题的研究

给出了采用J积分法计算加筋板应力强度因子时选择积分回路的方法;同时给出了采用刚度导数法计算加筋板应力强度因子时刚度导数的计算方法;另外,还对模拟铆钉连接作用的3种方法进行了初步研究。