共查询到20条相似文献,搜索用时 203 毫秒
1.
误差四元数及其在航天器姿态控制中的应用 总被引:1,自引:0,他引:1
以四元数作为定位参数对航天器进行姿态控制。首先导出了误差四元数矢量,从而解决了航天器姿态控制中最终姿态表示的非单值性问题;其次,通过一个典型例子提出了非线性三轴姿态控制方法,该方法以误差四元数作为反馈量,以控制力矩陀螺作为执行元件,利用李亚普诺夫函数对非线性系统进行控制,为大型航天器的姿态控制开辟了新的途径;最后,给出了仿真结果,从而说明了以误差四元数作为定位参数的航天器姿态控制法具有计算速度快、计算精度高等优点。 相似文献
2.
基于Rodrigues参数的姿态估计算法 总被引:5,自引:1,他引:4
以Rodrigues参数作为姿态描述参数提出一种快速的全姿态估计算法。Rodrigues参数具有简洁高效的特点,但它具有奇异性,不适用于大角度情况。首先将序贯旋转方法和Rodrigues参数相结合,提出了一种简洁、无奇异的姿态描述方法。然后应用该姿态描述方法,针对“矢量观测+陀螺”这种典型的姿态测量方案,讨论飞行器的姿态估计问题。在姿态估计算法设计中,给出了陀螺模型和观测矢量模型,推导了状态和状态误差协方差阵的预测方程和量测更新方程,并提出了预测方程的一种高效积分方法。仿真结果表明在估计精度等同的条件下,该姿态估计算法比四元数算法效率大约提高10%。 相似文献
3.
针对激光陀螺捷联惯导系统在动态尤其是高动态环境下的姿态误差显著增大的问题,提出了一种基于改进高斯混合粒子滤波的纯方位跟踪算法。算法基于混合粒子的卡尔曼滤波和粒子滤波的特点,用有限的高斯模型来近似后验状态密度、系统噪声和观测噪声的分布通过EM的算法设计实现模型的降阶,一定程度上克服了EM算法迭代的结果需要依赖初始值、可能收敛到局部最大点或可能收敛到参数空间边界的缺点,从而改善了粒子携带信息的衰减问题。通过仿真与试验结合,在纯动态应用环境下的姿态与定位精度补偿效果,与传统Kalman滤波相比,算法在保持高精度估计能力的同时,具有较强的鲁棒性,是解决非线性系统状态估计问题的一种有效方法。 相似文献
4.
主要研究敏捷航天器大角度姿态机动问题。首先,以SGCMG(Single Gimbal Control Momentum Gyroscope,单框架控制力矩陀螺)为执行机构,建立了基于四元数的航天器姿态机动数学模型;然后,针对SGCMG的奇异问题,研究了基于力矩输出和回避奇异能力最优的联合操纵律;最后,基于敏捷航天器姿态误差模型和李雅普诺夫稳定理论设计了一种退步控制律。仿真结果表明,该控制方法能够很好地实现大角度机动目标并有效避免了SGCMG的奇异状态,满足姿态机动任务的控制精度和稳定度要求。 相似文献
5.
6.
自主导航是航天器自主运行的核心关键技术。状态估计是实现航天器自主导航的核心手段,是指实时确定航天器在轨位置、速度和姿态等导航参数,是航天器自主导航技术的重点发展方向之一。首先,针对航天器自主导航的实际需求,阐述了研究航天器自主导航状态估计方法的必要性,具体从导航系统可观测性分析、导航滤波算法、导航系统误差补偿3个方面介绍了航天器自主导航状态估计方法的研究现状;然后,分析并总结状态估计方法在航天器自主导航系统中的实际应用;最后,结合理论研究和实际应用,给出了状态估计方法目前存在的主要问题并对其后续发展进行了展望。 相似文献
7.
为了跟踪空间目标,构建了基于局部粒子滤波器的多传感器融合方法估计空间目标状态。粒子滤波重要采样过程中,设计了基于融合估计的重要密度函数减少粒子贫化问题,并设计基于 McDE(Memetic compact Differ. ential Evolution)重采样策略,通过对粒子的变异与选择等进化操作来解决粒子退化问题。理论推导与仿真结果皆证明方法的有效性。 相似文献
8.
9.
使用变速控制力矩陀螺的航天器鲁棒自适应姿态跟踪控制 总被引:4,自引:1,他引:3
研究以变速控制力矩陀螺群(VSCMGs)为执行机构的航天器姿态跟踪问题。采用四元数描述姿态, 在姿态误差的描述中引入了现时姿态与期望姿态之间的方向余弦矩阵。考虑执行机构模型参数不确定和有外干扰的情况, 姿态误差动力学方程为多输入多输出(MIMO)的非线性系统。基于Lyapunov理论设计了鲁棒自适应控制器, 运用光滑投影算法避免了估计参数陷入奇异。仿真结果表明, 设计的鲁棒自适应控制律明显地缩小了姿态跟踪误差, 很好地解决了外部环境干扰和执行机构由于安装误差或机械磨损造成的轴承方向未对准的问题。 相似文献
10.
针对航天器姿态控制过程中同时存在输入饱和与姿态角速度受限的问题,提出了一种新型的姿态控制设计方法。该方法在保证系统渐近稳定的前提下,能够显式地给出输入力矩和姿态角速度的最大幅值,并通过引入一个时变锐度参数来增强系统对外部干扰的抑制能力;在此基础上,进一步考虑了由于四元数的冗余性所导致的退绕问题,设计了一组新的姿态偏差函数和偏差向量,使得控制器在满足上述约束的同时还具有抗退绕的优点。仿真结果表明,所提算法能够同时满足输入饱和与姿态角速度受限的约束,并且在较大外部干扰的情况下表现出了很强的鲁棒性,同时成功地规避了退绕现象。该算法为存在多重约束的航天器姿态控制问题提供了一个新的思路和解决方案,具有很好的实际应用价值。 相似文献
11.
Aimed at low accuracy of attitude determination because of using low-cost components which may result in non-linearity in integrated attitude determination systems, a novel attitude determination algorithm using vector observations and gyro measurements is presented. The various features of the unscented Kalman filter (UKF) and optimal-REQUEST (quaternion estimator) algorithms are introduced for attitude determination. An interlaced filtering method is presented for the attitude determination of nano-spacecraft by setting the quaternion as the attitude representation, using the UKF and optimal-REQUEST to estimate the gyro drifts and the quaternion, respectively. The optimal-REQUEST and UKF are not isolated from each other. When the optimal-REQUEST algorithm estimates the attitude quaternion, the gyro drifts are estimated by the UKF algorithm synchronously by using the estimated attitude quaternion. Furthermore, the speed of attitude determination is improved by setting the state dimension to three. Experimental results show that the presented method has higher performance in attitude determination compared to the UKF algorithm and the traditional interlaced filtering method and can estimate the gyro drifts quickly. 相似文献
12.
采用高精度卫星导航速度、位置信息以及星敏感器提供的姿态信息设计十表冗余捷联惯组的标定模型,包含陀螺和加速度计的零次项和标度因数,对卫星和星敏感器辅助的冗余激光陀螺捷联惯组进行实时在轨标定.利用标准Kalman滤波和Sage-Husa自适应滤波作为估计算法,对十表冗余捷联惯组参数进行在线估计.数值仿真结果表明:参数标定精度均在7%以内,是一种实时的在轨标定方法,满足误差补偿要求.冗余惯组在轨标定方法为航天器高精度定姿和定轨提供了一种理论参考. 相似文献
13.
‘‘Tian Tuo 1'(TT-1) nano-satellite is the first single-board nano-satellite that was successfully launched in China. The main objective of TT-1 is technology demonstration and scientific measurements. The satellite carries out the significant exploration of single-board architecture feasibility validation, and it is tailored to the low-cost philosophy by adopting numerous commercialoff-the-shelf(COTS) components. The satellite is featured with three-axis stabilization control capability. A pitch bias momentum wheel and three magnetic coils are adopted as control actuators.The sun sensors, magnetometers and a three-axis gyro are employed as the measurement sensors.The quaternion estimator(QUEST) and unscented Kalman filter(UKF) method are adopted for the nano-satellite attitude determination. On-orbit data received by ground station is conducted to analysis the performance of attitude determination and control system(ADCS). The results show that the design of ADCS for TT-1 is suitable, robust and feasible. 相似文献
14.
This paper is concerned with the adaptive robust cubature Kalman filtering problem for the case that the dynamics model error and the measurement model error exist simultaneously in the satellite attitude estimation system. By using Hubel-based robust filtering methodology to correct the measurement covariance formulation of cubature Kalman filter, the proposed filtering algorithm could effectively suppress the measurement model error. To further enhance this effect and reduce the impact of the dynamics model error, two different adaptively robust filtering algorithms, one with the optimal adaptive factor based on the estimated covariance matrix of the predicted residuals and the other with multiple fading factors based on strong tracking algorithm, are developed and applied for the satellite attitude estimation. The quaternion is employed to represent the global attitude parameter, and three-dimensional generalized Rodrigues parameters are introduced to define the local attitude error. A multiplicative quaternion error is derived from the local attitude error to maintain quaternion normalization constraint in the filter. Simulation results indicate that the proposed novel algorithm could exhibit higher accuracy and faster convergence compared with the multiplicative extended Kalman filter, the unscented quaternion estimator, and the adaptive robust unscented Kalman filter. 相似文献
15.
16.
17.
18.
研究了一种星敏感器一陀螺组合定姿方式中的姿态敏感器误差的实时在轨标定方法。首先,选择直观的欧拉角作为姿态描述参数,根据星敏感器和陀螺的测量原理建立星敏感器一陀螺在轨标定的测量方程和状态方程,并以此建立数学模型。其次,采用简单高效的EKF(ExtendedKalmanFilter,扩展卡尔曼滤波)作为估值算法,进行了在轨标定数值仿真。对于航天器姿态定向中出现的姿态角和星敏感器安装角之间的耦合问题,通过在特定姿态通道上施加简单姿态机动实现了解耦。数值结果表明,该实时在轨标定方法,尤其是所提出的姿态角和星敏感器安装角解耦策略,可以实现对航天器姿态的实时精确估计以及对星敏感器安装误差、陀螺常值漂移和相关漂移等误差的实时在轨标定。该方法可用于航天器姿态测量设备的实时在轨标定和航天器姿态的高精度实时确定。 相似文献
19.
为了提高双轴旋转惯导重要参数标定的快速性和精度,提出一种快速自标定方法。通过设置不同的标定路径可以在10 min内完成陀螺和加速度计的零偏以及标度因数误差的标定。该方法利用基于姿态误差观测的卡尔曼滤波完成陀螺零偏的估计。通过六位置翻滚并以速度误差作为观测量进行卡尔曼滤波,完成加速度计的零偏及标度因数误差的标定。使天向陀螺绕方位轴旋转4周,使水平陀螺绕水平轴转动4周,通过计算旋转前后的姿态误差完成陀螺标度因数误差的估计。仿真和试验结果表明,该方法可以实现双轴旋转惯导重要参数10 min内完成自标定,且具有较高的精度。 相似文献