Design of Time-constrained Guidance Laws via Virtual Leader Approach

Guidance problems with flight time constraints are considered in this article. A new virtual leader scheme is used for design of guidance laws with time constraints. The core idea of this scheme is to adopt a virtual leader for real missiles to convert a guidance problem with time constraints to a nonlinear tracking problem, thereby making it possible to settle the problem with a variety of control methods. A novel time-constrained guidance (TCG) law, which can control the flight time of missiles to a prescribed time, is designed by using the virtual leader scheme and stability method. The TCG law is a combination of the well-known proportional navigation guidance(PNG) law and the feedback of flight time error. What's more, this law is free of singularities and hence yields better performances in comparison with optimal guidance laws with time constraints. Nonlinear simulations demonstrate the effectiveness of the proposed law.     

Integrated guidance and control design of a flight vehicle with side-window detection

This paper considers the guidance and control problem of a flight vehicle with side-window detection. In order to guarantee the target remaining in the seeker's sight of view, the line of sight and the attitude of the flight vehicle should be under some constraints caused by the side-window, which leads to coupling between the guidance and the attitude dynamics model. To deal with the side-window constraints and the coupling, a novel Integrated Guidance and Control (IGC) design approach is proposed. Firstly, the relative motion equations are derived in the body-Line of Sight (LOS) coordinate system. And the guidance and control problem of the flight vehicle is formulated into an IGC problem with state constraints. Then, based on the singular perturbation method, the IGC problem is decomposed into the control design of the quasi-steady-state subsystem and the boundary-layer subsystem which can be designed separately. Finally, the receding horizon control is applied to the control design for the two subsystems. Simulation results show the effectiveness of the proposed approach.     

飞翼式微型飞行器飞行动力学特性研究

微型飞行器(MAV)非线性飞行力学特性研究是MAV设计中的一个重要环节。由于MAV具有自身尺寸微小,飞行速度低等特点,其空气动力学低雷诺数效应十分明显。飞翼式MAV的非常规气动布局也使得其飞行力学特性与常规飞行器有很大差异。以低雷诺数风洞实验为基础,研究了飞翼式MAV空气动力学特性,提出了1种针对飞翼式飞行器的动阻尼导数计算方法。在飞翼式MAV飞行速度范围内将其运动方程分段线性化以研究其飞行力学特性数值规律。结果表明,飞翼式MAV各项飞行品质指标与常规飞行器存在很大差异,在整个飞行范围内其飞行动力学特性呈非线性变化规律。本文的研究对实现飞翼式MAV自主飞行控制具有重要意义。     

临近空间低动态飞行器控制研究综述

针对临近空间低动态飞行器出现的新的控制问题,分析和总结了临近空间低动态飞行器控制进展状况和发展趋势。首先,基于飞艇和浮空器等临近空间低动态飞行器的特点,归纳总结了其飞行控制问题。在此基础上,结合这类飞行器的当前发展状况,从飞行器控制角度出发,着重介绍总结了临近空间低动态飞行器在控制系统执行机构配置、数学模型、姿态控制、定点控制、速度控制、航迹优化、轨迹跟踪控制、升空和返回控制、压力控制,以及应用的多种控制策略的研究进展。最后,在已有的控制问题研究发展的基础上,提出了临近空间低动态飞行器在控制研究领域所要解决和关注的若干问题。     

无人机综合飞行/推力矢量控制

以某无人机为背景,主要研究大机动时带推力矢量的综合飞行/推进控制系统的设计方法。应用非线性动态逆方法,根据无人机本身具有明显不同时间尺度差异的动力学特性,结合奇异摄动理论将控制变量按照响应快慢分为4个回路进行了控制器的设计与仿真;设计推力矢量控制和气动控制相结合的控制器,实现飞行和推力矢量的控制综合;将无人机的任务转化为对飞行控制的限制条件,对所设计的控制系统进行了数字仿真,结果表明所设计的控制器能够满足飞机做大机动时的控制要求。     

An LMI-based decoupling control for electromagnetic formation flight

Electromagnetic formation flight(EMFF) leverages electromagnetic force to control the relative position of satellites. EMFF offers a promising alternative to traditional propellant-based spacecraft flight formation. This novel strategy is very attractive since it does not consume fuel. Due to the highly coupled nonlinearity of electromagnetic force, it is difficult to individually design a controller for one satellite without considering others, which poses challenges to communications.This paper is devoted to decoupling control of EMFF, including regulations, constraints and controller design. A learning-based adaptive sliding mode decoupling controller is analyzed to illustrate the problem of existing results, and input rate saturation is introduced to guarantee the validity of frequency division technique. Through transformation, the imposed input rate saturation is converted to state and input constraints. A linear matrix inequalities(LMI)-based robust optimal control method can then be used and improved to solve the transformed problem. Simulation results are presented to demonstrate the effectiveness of the proposed decoupling control.     

直升机全包线协调转弯控制律设计及仿真

提出了一种应用多目标遗传算法设计直升机全包线协调转弯控制律参数的方法.将侧向过载和倾斜角稳态误差的设计要求转换为不等式约束,并以所有设计包线总体性能Pareto最优作为总目标,以各设计包线性能最优作为子目标,再应用多目标遗传算法自动搜索最优伞包线协调转弯控制律参数.最后,设计了某型直升机协调转弯控制律参数,仿真结果表明...     

小展弦比飞翼布局作战飞机可控性设计方法

 飞翼布局飞机取消了常规布局飞机采用的安定面和操纵面,由此引起其可控性设计的诸多新问题。以某小展弦比飞翼布局作战飞机为例,利用风洞试验结果研究了几种典型新型操纵面的操纵新机理及不同飞行条件下的操纵效能等。基于可控性设计的要求,估算了该飞翼构型作战使用所需的三轴最大控制力矩系数。通过引进舵容量的概念提出了新型操纵面的参数化设计方法,最后对这一新布局方案进行了可控性评估,为飞翼布局飞机概念设计阶段的新型操纵面布置和设计提供了一种实用的方法。     

面向先进战斗机研制的风洞模型飞行试验技术

高机动性先进战斗机气动布局与飞控系统设计面临愈加严峻的流动/运动/控制耦合问题,大迎角飞行以及推力矢量等高新技术应用也使其在研制过程中面临更高的技术风险,风洞模型飞行试验是实现飞行器气动/飞行/控制一体化研究、降低研制技术风险的重要手段。介绍了低速风洞模型飞行试验技术原理及国内外发展现状,对试验技术主要特点及其在支撑先进战斗机研制中的作用、应用范围、应用阶段以及面临的主要挑战进行了分析,为试验技术发展和应用提供参考。发展和应用低速风洞模型飞行试验技术,有利于充分挖掘战斗机的气动性能与控制性能,降低试飞风险,是新一代战斗机研制、新技术工程化应用的重要支撑技术。     

小展弦比飞翼布局作战飞机偏航轴飞行品质评定

依据MIL—STD—1797A飞行品质规范,对小展弦比飞翼布局作战飞机的偏航轴飞行品质进行了评定研究。评定结果表明：由于构型的原因,飞翼布局飞机本体的稳定特性和阻尼特性都较差,因此飞行控制系统对其动态响应特性的调节作用更加明显。稳态配平特性主要受构型的影响,飞翼布局飞机一般不能完全满足飞行品质的要求。由于可控性的设计要求需采用多操纵面的组合操纵,控制分配技术导致某些现有的品质准则需要修改。小展弦比飞翼布局飞机取消了垂尾（方向舵）并采用了新型操纵面（ICE）,在某些情形下对偏航轴操纵效能的需求与常规飞机相比存在较大的差异。总之,在飞翼布局作战飞机的构型设计、飞控系统设计以及飞行品质评定条款的制定、实施中,均需考虑这些新的飞行品质特性。     

Aerodynamic Design Methodology for Blended Wing Body Transport

This paper puts forward a design idea for blended wing body(BWB).The idea is described as that cruise point,maximum lift to drag point and pitch trim point are in the same flight attitude.According to this design idea,design objectives and constraints are defined.By applying low and high fidelity aerodynamic analysis tools,BWB aerodynamic design methodology is established by the combination of optimization design and inverse design methods.High lift to drag ratio,pitch trim and acceptable buffet margin can be achieved by this design methodology.For 300-passenger BWB configuration based on static stability design,as compared with initial configuration,the maximum lift to drag ratio and pitch trim are achieved at cruise condition,zero lift pitching moment is positive,and buffet characteristics is well.Fuel burn of 300-passenger BWB configuration is also significantly reduced as compared with conventional civil transports.Because aerodynamic design is carried out under the constraints of BWB design requirements,the design configuration fulfills the demands for interior layout and provides a solid foundation for continuous work.     

无人直升机飞行控制系统设计

基于直升机非线性动力学方程 ,在简化悬停和低速飞行模态的推力扭矩模型的基础之上 ,用多变量线性鲁棒控制、遗传模糊控制和非线性跟踪控制等 3种不同方法 ,设计了飞行控制系统 ,并通过各种飞行仿真验证了飞行控制性能 ,分析与比较了这 3种方法的特点     

战斗机超机动飞行自抗扰控制器设计

提出了一种利用自抗扰控制器算法在大包线范围内设计超机动飞行控制系统的新方法。根据奇异摄动理论和自抗扰控制器能够动态补偿系统模型扰动和外扰的特性,在超机动飞行的快慢子回路中分别引入自抗扰控制器,实现了快变量和慢变量的动态解耦控制。控制律设计直接依据超机动飞行的强耦合、强非线性模型,在很大的包线范围内不需要改变控制器的结构和参数,大大简化了设计过程。大包线范围内的大迎角机动仿真结果表明,系统具有良好的动态和稳态性能,控制器具有很强的鲁棒性,为解决大包线范围内的超机动飞行控制问题提供了一种新的途径。     

微型飞行器气动特性和飞行控制

微型飞行器的主要题实质是由于飞行器微小型化面临的低Re数流动引起的附加问题.本文结合微型飞行器的全系统关键技术攻关,分别讨论微型飞行器低Re数绕流特点和机理;不同外形的低Re数气动特性以及飞行控制技术中的相关科学问题.     

特征结构配置在设计直接升力控制律中的应用

采用直接力控制可弥补常规飞机在轨迹操纵方面的不足,并产生某些新的运动模式。文中首先对飞机直接升力控制的3种基本运动模式进行了讨论。归纳出直接升力控制律的设计就是输出解耦控制系统的设计问题。在简述了用特征结构配置和模型跟踪技术求算反馈和前馈增益阵的主要步骤之后,以CitationⅡ型飞机为算例,设计了其直接升力控制律。计算结果是令人满意的,说明特征结构配置是一种设计飞行控制系统的有效方法。     

飞行管理系统下降路径构建及应用研究

在飞行管理系统下降设计中，通过下降路径的构建可为接近目的机场提供一个垂直轨迹，使飞机遵守终端区各种限制要求，从而精确控制下降路径，满足安全性要求。本文分析了下降路径的定义及其在典型机型中的构建方法，给出了下降路径的描述方法及实现途径，并对具体机型中的应用做了简要介绍。     

Active Control Law Design for Flutter/LCO Suppression Based on Reduced Order Model Method

 Active stability augmentation system is an attractive and promising technology to suppress flutter and limit cycle oscillation (LCO). In order to design a good active control law, the control plant model with low order and high accuracy must be pro-vided, which is one of the most important key points. The traditional model is based on low fidelity aerodynamics model such as panel method, which is unsuitable for transonic flight regime. The physics-based high fidelity tools, reduced order model (ROM) and CFD/CSD coupled aeroservoelastic solver are used to design the active control law. The Volterra/ROM is applied to constructing the low order state space model for the nonlinear unsteady aerodynamics and static output feedback method is used to active control law design. The detail of the new method is demonstrated by the Goland+ wing/store system. The simu-lation results show that the effectiveness of the designed active augmentation system, which can suppress the flutter and LCO successfully.     

机动飞机／发动机设计参数的一体化选择

发展了一种机动飞机／发动机设计参数的一体化选择方法和软件。根据机动飞机的飞行任务要求，确定设计目标和约束，其中包括飞机性能约束和发动机部件设计约束，并以此对飞机的主要设计参数和发动机循环参数进行一体化优选。该软件由飞机几何、飞机质量、飞机气动性能、发动机非安装和安装性能、发动机质量和外廓尺寸、飞机性能、优化等模块组成。此软件已应用于已有机动飞机／发动机的改型方案论证和未来高机动飞机／发动机方案的分析研究，本文给出部分计算实例。使用此软件的经验表明，计算结果合理，计算精度和所需时间适合于飞机／发动机系统方案论证和初步设计。     

超长航时太阳能无人机关键技术综述

超长航时太阳能无人机（UAV）以其高效节能、原理上可实现无限巡航的特点受到广泛关注，而其独特的设计指标与任务特性也对各项关键技术提出了较高要求。多设计要素的高度耦合意味着不同于常规飞行器的总体设计方法，低密度、低速度的飞行条件使其具有明显的低雷诺数气动特性，柔性超大展弦比机翼带来了复杂的气动弹性问题，低翼载荷特性与较大的风场扰动增加了控制难度，极端的飞行环境与苛刻的任务指标对能源、动力系统带来了新挑战，飞行性能对能源系统的高度依赖开辟了飞行轨迹优化的研究方向。本文梳理了超长航时太阳能无人机关键技术的研究现状，在此基础上对各项技术中的难点问题进行了阐释，并对超长航时太阳能无人机未来发展趋势进行了展望。     

Impact of mission requirements and constraints on conceptual launch vehicle design

The objective of this paper is to analyse the impact of mission requirements and constraints on both the optimum vehicle design and the effects on flight path selection for two types of reusable two-stage-to-orbit launch vehicles. The first vehicle type considered provides horizontal take-off and landing capabilities and is intended to be propelled by an airbreathing propulsion system during stage 1 flight. The second vehicle type assumes a vertical launch and is accelerated by a rocket propulsion system during the booster stage ascent flight. The analysis employs a design tool for simultaneous system and mission optimization. It consists of a CAD-based preliminary vehicle design tool, aerodynamic and aerothermodynamic calculation software, flight simulation programs, and a two-level decomposition optimization algorithm enabling simultaneous system and flight optimization. The results to be presented show that the cruise flight requirement for an European launched mission of the airbreathing vehicle results in a loss of 60 % payload mass as compared to a mere accelerated ascent for a near equatorial mission into the same target orbit assuming constant take-off mass. The strong dependencies of mission requirements on both the optimal vehicle design and the ascent performance are determined for the rocket-powered vehicle type by varying the inclination and altitude of the target orbit.