NASA's Biomass Production Chamber: a testbed for bioregenerative life support studies.

The Biomass Production Chamber (BPC) located at Kennedy Space Center, FL, USA provides a large (20 m2 area, 113 m3 vol.), closed environment for crop growth tests for NASA's Controlled Ecological Life Support System (CELSS) program. Since the summer of 1988, the chamber has operated on a near-continuous basis (over 1200 days) without any major failures (excluding temporary power losses). During this time, five crops of wheat (64-86 days each), three crops of soybean (90 to 97 days), five crops of lettuce (28-30 days), and four crops of potato (90 to 105 days were grown, producing 481 kg of dry plant biomass, 196 kg edible biomass, 540 kg of oxygen, 94,700 kg of condensed water, and fixing 739 kg of carbon dioxide. Results indicate that total biomass yields were close to expected values for the given light input, but edible biomass yields and harvest indices were slightly lower than expected. Stand photosynthesis, respiration, transpiration, and nutrient uptake rates were monitored throughout growth and development of the different crops, along with the build-up of ethylene and other volatile organic compounds in the atmosphere. Data were also gathered on system hardware maintenance and repair, as well as person-hours required for chamber operation. Future tests will include long-term crop production studies, tests in which nutrients from waste treatment systems will be used to grow new crops, and multi-species tests.     

Canadian advanced life support capacities and future directions

Canada began research on space-relevant biological life support systems in the early 1990s. Since that time Canadian capabilities have grown tremendously, placing Canada among the emerging leaders in biological life support systems. The rapid growth of Canadian expertise has been the result of several factors including a large and technically sophisticated greenhouse sector which successfully operates under challenging climatic conditions, well planned technology transfer strategies between the academic and industrial sectors, and a strong emphasis on international research collaborations. Recent activities such as Canada’s contribution of the Higher Plant Compartment of the European Space Agency’s MELiSSA Pilot Plant and the remote operation of the Arthur Clarke Mars Greenhouse in the Canadian High Arctic continue to demonstrate Canadian capabilities with direct applicability to advanced life support systems. There is also a significant latent potential within Canadian institutions and organizations with respect to directly applicable advanced life support technologies. These directly applicable research interests include such areas as horticultural management strategies (for candidate crops), growth media, food processing, water management, atmosphere management, energy management, waste management, imaging, environment sensors, thermal control, lighting systems, robotics, command and data handling, communications systems, structures, in-situ resource utilization, space analogues and mission operations. With this background and in collaboration with the Canadian aerospace industry sector, a roadmap for future life support contributions is presented here. This roadmap targets an objective of at least 50% food closure by 2050 (providing greater closure in oxygen, water recycling and carbon dioxide uptake). The Canadian advanced life support community has chosen to focus on lunar surface infrastructure and not low Earth orbit or transit systems (i.e. microgravity applications). To advance the technical readiness for the proposed lunar missions, including a lunar plant growth lander, lunar “salad machine” (i.e. small scale plant production unit) and a full scale lunar plant production system, a suite of terrestrial developments and analogue systems are proposed. As has been successfully demonstrated by past Canadian advanced life support activities, terrestrial technology transfer and the development of highly qualified personnel will serve as key outputs for Canadian advanced life support system research programs. This approach is designed to serve the Canadian greenhouse industry by developing compliance measures for mitigating environmental impact, reducing labour and energy costs as well as improving Canadian food security, safety and benefit northern/remote communities.     

The role of computerized modeling and simulation in the development of life support system technologies.

Using conventional means of process development, it would take decades and hundreds of millions of dollars to develop technology for recycling of water and solid waste for lunar missions within the next thirty years. Since we anticipate neither that amount of time nor level of funding, new methodologies for developing life support systems (LSS) technologies are essential. Computerized modeling and simulation (CMAS) is a tool that can greatly reduce both the time and cost of technology development. By CMAS, we refer to computer methods for correlating, storing and retrieving property data for chemical species and for solving the phenomenological equations of physical/chemical processes (i.e., process conditions based on properties of materials and mass and energy balances, equipment sizing based on rate processes and the governing equations for unit operations). In particular, CMAS systems can be used to evaluate a LSS process design with minimal requirements for laboratory experimentation. A CMAS model using ASPEN PLUS is presented for a vapor compression distillation (VCD) system designed for reclaiming water from urine.     

Model implementation for dynamic computation of system cost for advanced life support.

Life support system designs for long-duration space missions have a multitude of requirements drivers, such as mission objectives, political considerations, cost, crew wellness, inherent mission attributes, as well as many other influences. Evaluation of requirements satisfaction can be difficult, particularly at an early stage of mission design. Because launch cost is a critical factor and relatively easy to quantify, it is a point of focus in early mission design. The method used to determine launch cost influences the accuracy of the estimate. This paper discusses the appropriateness of dynamic mission simulation in estimating the launch cost of a life support system. This paper also provides an abbreviated example of a dynamic simulation life support model and possible ways in which such a model might be utilized for design improvement.     

Prospective technologies and equipment for sanitary–hygienic measures for life support systems

Creation of optimal sanitary–hygienic conditions is a prerequisite for good health and performance of crews on extended space missions. There is a rich assortment of associated means, methods and equipment developed and experimentally tested in orbital flights. However, over a one-year period a crew of three uses up about 800 kg of ground-supplied wet wipes and towels for personal needs. The degree of closure of life support systems for long-duration orbital flights should be maximized, particularly for interplanetary missions, which exclude any possibility of re-supply. Washing with regenerated water is the ultimate sanitary–hygienic goal. That is why it is so important to design devices for crew bathing during long-term space missions. Investigations showed that regeneration of wash water (WW) using membrane processes (reverse osmosis, nanofiltration etc.), unlike sorption, would not require much additional expendables. A two-stage membrane recovery unit eliminated >85% of permeate from real WW with organic and inorganic selectivity of 82–95%. The two-stage WW recovery unit was tested with artificial and real WW containing detergents available for space crews. Investigations into the ways of doing laundry and drying along with which detergents will be the best fit for space flight are also planned. Testing of a technology for water extraction from used textiles using a conventional period of contact of 1 s or more, showed that the humidity of the outgoing air flow neared 100%. Issues related to designing the next generation of space life support systems should consider the benefits of integrating new sanitary–hygienic technologies, equipment, and methods.     

The MELISSA pilot plant facility as as integration test-bed for advanced life support systems.

The different advances in the Micro Ecological Life Support System Alternative project (MELISSA), fostered and coordinated by the European Space Agency, as well as in other associated technologies, are integrated and demonstrated in the MELISSA Pilot Plant laboratory. During the first period of operation, the definition of the different compartments at an individual basis has been achieved, and the complete facility is being re-designed to face a new period of integration of all these compartments. The final objective is to demonstrate the potentiality of biological systems such as MELISSA as life support systems. The facility will also serve as a test bed to study the robustness and stability of the continuous operation of a complex biological system. This includes testing of the associated instrumentation and control for a safe operation, characterization of the chemical and microbial safety of the system, as well as tracking the genetic stability of the microbial strains used. The new period is envisaged as a contribution to the further development of more complete biological life support systems for long-term manned missions, that should be better defined from the knowledge to be gained from this integration phase. This contribution summarizes the current status of the Pilot Plant and the planned steps for the new period.     

Atmospheric dynamics and bioregenerative technologies in a soil-based ecological life support system: initial results from Biosphere 2.

Biosphere 2 is the first man-made, soil-based, bioregenerative life support system to be developed and tested. The utilization and amendment of local space resources, e.g. martian soil or lunar regolith, for agricultural and other purposes will be necessary if we are to minimize the requirement for Earth materials in the creation of long-term off-planet bases and habitations. Several of the roles soil plays in Biosphere 2 are 1) for air purification 2) as a key component in created wetland systems to recycle human and animal wastes and 3) as nutrient base for a sustainable agricultural cropping program. Initial results from the Biosphere 2 closure experiment are presented. These include the accelerated cycling rates due to small reservoir sizes, strong diurnal and seasonal fluxes in atmospheric CO2, an unexpected and continuing decline in atmospheric oxygen, overall maintenance of low levels of trace gases, recycling of waste waters through biological regeneration systems, and operation of an agriculture designed to provide diverse and nutritionally adequate diets for the crew members.     

Waste recycling issues in bioregenerative life support.

Research and technology development issues centering on the recycling of materials within a bioregenerative life support system are reviewed. The importance of recovering waste materials for subsequent use is emphasized. Such material reclamation will substantially decrease the energy penalty paid for bioregenerative life support systems, and can potentially decrease the size of the system and its power demands by a significant amount. Reclamation of fixed nitrogen and the sugars in cellulosic materials is discussed.     

Considerations of design for life support systems.

During the design phase for construction of artificial ecosystems, the following considerations are important. (1) Influences on living things in the ecosystem, such as lifestyles and physiological functions caused by stresses due to environmental changes. The long stay in the artificial ecosystem has a possibility to lead to evolutional change in the living things. (2) The system operation method in trouble, which relates to maintainability. (3) The system metamorphosis according to new technologies. (4) Route minimization of material flow that leads to an optimum system layout.     

Modelling studies of ionospheric convection in northern and southern polar regions

The realistic model of Quegan et al. has been used to investigate the convection paths of ionospheric plasma at 300 km altitude, for different polar cap radii and in both hemispheres. Taking the Northern magnetic dip pole to be at a co-latitude of 11° and the Southern magnetic dip pole at a co-latitude of 23°, these paths are presented in a Sun-Earth frame, with the position of the Earth's axis fixed as it is on 21 March, as polar plots centred on the magnetic pole. There are marked hemispheric differences between 13 and 23 L.T., particularly near the stagnation region at 18 to 21 L.T., but only minor differences between 00 and 12 L.T., when the radius of the polar cap exceeds 12°. For a smaller polar cap, the differences between the hemispheres are small at all local times. The time taken to perform a complete circuit is most dependent on the polar cap radius, and most variable - between 15 and 36 h - for convection paths starting near 60° latitude. The time that plasma convecting from noon to near midnight across the Northern polar cap spends within the 10° co-latitude circle increases from 6 h, for a polar cap radius of 10°, to 11.5 h at 17°. These results are compared and contrasted with other model calculation results and with some ground-based and satellite observations of plasma densities at high latitudes.     

Microbiological characterization of a regenerative life support system.

A Variable Pressure Plant Growth Chamber (VPGC), at the Johnson Space Center's (JSC) ground-based Regenerative Life Support Systems (RLSS) test bed, was used to produce crops of soil-grown lettuce. The crops and chamber were analyzed for microbiological diversity during lettuce growth and after harvest. Bacterial counts for the rhizosphere, spent nutrient medium, heat exchanger condensate, and atmosphere were approximately 10(11) Colony Forming Units (CFU) g-1 10(5) CFU ml-1, 10(5) CFU ml-1, and 600 CFU m-3, respectively. Pseudomonas was the predominant bacterial genus. Numbers of fungi were about 10(5) CFU g-1 in the rhizosphere, 4-200 CFU ml-1 in the spent nutrient medium, 110 CFU ml-1 in the heat exchanger condensate, and 3 CFU m-3 in the atmosphere. Fusarium and Trichoderma were the predominant fungal genera.     

Biological life support for manned missions by ESA.

The anticipated evolution of life support technologies for ESA, considering both the complementary life support system requirements and the missions' characteristics, is presented. Based on these results, promising biological life support technologies for manned space missions have been selected by ESA either for their intrinsic ability and performance in effecting specific tasks for atmosphere-, water-, waste-management versus physico-chemical alternatives and/or for longer-term application to a more ecological concept (CES) focusing ultimately on food production. Actual status and plan for terrestrial and space testing of biological life support presented focusing on the "task specific" decontamination technology of the Biological Air Filter (BAF), and on food reprocessing technologies from biodegradable wastes with the MELISSA microbial ecosystem.     

Development of life support requirements for long-term space flight.

When humans move out into the solar system to stay for long durations, the most immediate challenge will be the provision of a life-supporting environment in locations that are naturally devoid of food, air, and water. Life support systems must provide these commodities in all phases of space flight--during intravehicular activity (IVA) and during extra-vehicle activity (EVA). Systems that support human life must provide: overall reliability in the space environment, allowing maintenance and component replacement in space; reduced resupply mass of consumables and spares; for planetary surfaces, the ability to utilize local resources for increased self sufficiency; and the minimized mass power and volume requirements necessary for all space flight systems. This paper will discuss the melding of these technical requirements in such a way as to meet the human needs of space flight.     

Proximate composition of CELSS crops grown in NASA's Biomass Production Chamber.

Edible biomass from four crops of wheat (Triticum aestivum L.), four crops of lettuce (Lactuca sativa L.), four crops of potato (Solanum tuberosum L.), and three crops of soybean (Glycine max (L.) Merr.) grown in NASA's CELSS Biomass Production Chamber were analyzed for proximate composition. All plants were grown using recirculating nutrient (hydroponic) film culture with pH and electrical conductivity automatically controlled. Temperature and humidity were controlled to near optimal levels for each species and atmospheric carbon dioxide partial pressures were maintained near 100 Pa during the light cycles. Soybean seed contained the highest percentage of protein and fat, potato tubers and wheat seed contained the highest levels of carbohydrate, and lettuce leaves contained the highest level of ash. Analyses showed values close to data published for field-grown plants with several exceptions: In comparison with field-grown plants, wheat seed had higher protein levels; soybean seed had higher ash and crude fiber levels; and potato tubers and lettuce leaves had higher protein and ash levels. The higher ash and protein levels may have been a result of the continuous supply of nutrients (e.g., potassium and nitrogen) to the plants by the recirculating hydroponic culture.     

Stoichiometric constraints and complete closure of long-term life support systems.

High closure of matter recycling is an obvious requirement for long-term life support systems (LSS). Biological species are obligate components of the LSS since physical/chemical components are not able yet to provide food for crew. However including biological species into LSS is difficult due to specific stoichiometric configuration of their inputs and outputs. Formally the problem is to estimate the ability for given set of species to provide complete closure of LSS. Two possible models of metabolism organization can be considered: rigid and flexible ones. Stoichiometric analyses showed that the rigid metabolism case is not typical and takes place with very specific requirements. The flexible metabolic model can be applied to describing wide range of systems. Some formal indications of ability to provide complete closure and stationarity of LSS state are considered in the paper. These indications establish some constraints on the form of mathematical models intended to describe artificial and natural ecological systems.     

Accumulation and effect of volatile organic compounds in closed life support systems.

Bioregenerative life support systems (BLSS) being considered for long duration space missions will operate with limited resupply and utilize biological systems to revitalize the atmosphere, purify water, and produce food. The presence of man-made materials, plant and microbial communities, and human activities will result in the production of volatile organic compounds (VOCs). A database of VOC production from potential BLSS crops is being developed by the Breadboard Project at Kennedy Space Center. Most research to date has focused on the development of air revitalization systems that minimize the concentration of atmospheric contaminants in a closed environment. Similar approaches are being pursued in the design of atmospheric revitalization systems in bioregenerative life support systems. in a BLSS one must consider the effect of VOC concentration on the performance of plants being used for water and atmospheric purification processes. In addition to phytotoxic responses, the impact of removing biogenic compounds from the atmosphere on BLSS function needs to be assessed. This paper provides a synopsis of criteria for setting exposure limits, gives an overview of existing information, and discusses production of biogenic compounds from plants grown in the Biomass Production Chamber at Kennedy Space Center.     

Waste bioregeneration in life support CES: development of soil organic substrate.

An experimental model of matter turnover in the biotic cycle: plants (plant biomass) --> mushrooms (residual substrate + mushroom fruit bodies) --> worms (biohumus) --> microorganisms (soillike substrate) --> plants is presented. The initial mass of soillike substrate was produced from wheat plants grown in a hydroponic system. Three cycles of matter turnover in the biotic cycle were carried out. Grain productivity on soillike substrate was 21.87 g/m2 day. The results obtained were used for designing a CES containing man, plants, soillike substrate, bioregeneration module and aquaculture. It was shown, that the circulating dry mass of the CES is 756 kg. The main part (88%) of the circulating mass accumulates in the soillike substrate and bioregeneration module.     

The problem of assuring performance robustness of biological life support systems.

A perspective of the process of obtaining performance robustness of space exploration life support systems is presented. Some useful definitions are made, some relevant issues are addressed, and a procedure for establishing performance robustness, so far as it now known, is explained. An example is given to illustrate the procedure.     

Mass balances for a biological life support system simulation model.

Design decisions to aid the development of future space-based biological life support systems (BLSS) can be made with simulation models. Here we develop the biochemical stoichiometry for 1) protein, carbohydrate, fat, fiber, and lignin production in the edible and inedible parts of plants; 2) food consumption and production of organic solids in urine, feces, and wash water by the humans; and 3) operation of the waste processor. Flux values for all components are derived for a steady-state system with wheat as the sole food source. The large-scale dynamics of a materially-closed (BLSS) computer model is described in a companion paper. An extension of this methodology can explore multi-food systems and more complex biochemical dynamics while maintaining whole-system closure as a focus.     

Volatile organic compounds detected in the atmosphere of NASA's Biomass Production Chamber.

Atmospheres of enclosed environments in which 20 m2 stands of wheat, potato, and lettuce were grown were characterized and quantified by gas chromatography-mass spectrometry. A large number (in excess of 90) of volatile organic compounds (VOCs) were identified in the chambers. Twenty eight VOC's were assumed to be of biogenic origin for these were not found in the chamber atmosphere when air samples were analyzed in the absence of plants. Some of the compounds found were unique to a single crop. For example, only 35% of the biogenic compounds detected in the wheat atmosphere were unique to wheat, while 36% were unique to potato and 26% were unique to lettuce. The number of compounds detected in the wheat (20 compounds) atmosphere was greater than that of potato (11) and lettuce (15) and concentration levels of biogenic and non-biogenic VOC's were similar.