Theory of Adaptive Radar

This paper reviews the principles of adaptive radar in which both the spatial (antenna pattern) and temporal (Doppler filter) responses of the system are controlled adaptively. An adaptive system senses the angular-Doppler distribution of the external noise field and adjusts a set of radar parameters for maximum signal-to-interference ratio and optimum detection performance. A gradient technique for control of the radar array/filter weights is described and shown to generate weights which asymptotically approach optimum values. Simulation results illustrate the convergence rate of adaptive systems and the performance improvement which can be achieved.     

A localized adaptive MTD processor

The problem of achieving the optimum moving target indicator (MTI) detection performance in strong clutter of unknown spectrum when the set of data available to the estimation of clutter statistics is small due to a severely nonhomogeneous environment is studied. A new adaptive implementation, called the Doppler domain localized generalized likelihood ratio processor (DDL-GLR), is proposed, and its detection performance is studied in detail. It is shown that the DDL-GLR is a data-efficient implementation of the high-order optimum detector and has several advantages of practical importance over the adaptive processors     

An adaptive array detector with mismatched signal rejection

An adaptive detection algorithm with a sensibility parameter for rejecting unwanted signals is presented. This algorithm is a simple modification of the generalized likelihood ratio (GLR) detector (or test) for detecting a signal in zero mean Gaussian noise with unknown correlation matrix. Specifically, the adaptive detection algorithm is obtained by introducing an arbitrary positive scalar, which is called the sensitivity parameter, into the GLR detector as a multiplier of an already existing quadratic term. The GLR detector then becomes a special case of this detector for the unity sensitivity parameter. It is shown that the sensitivity parameter controls the degree to which unwanted signals are rejected. From numerical examples, it is demonstrated how the sensitivity parameter can be chosen such that unwanted signals, can be rejected while maintaining acceptable detection loss for slightly mismatched signals. Further insight into previous work on adaptive detection is also given     

超声速流中三波结构的参数优化研究

对三波结构的参数进行了探讨，给出了在反射激波和主激波后一些气动力变量的比值存在极值，文中称这种结构为优化结构，当给定气流的马赫数时，理论上就可确定优化三波结构的入射激波强度和存在区域，这可为一些超声速气动装置的设计提供参考依据。     

Weak Signal Detection in Non-Gaussian Noise of Unknown Level

An adaptive threshold detector to test for the presence of a weak signal in additive non-Gaussian noise of unknown level is discussed. The detector consists of a locally optimum detector, a noise level estimator, and a decision device. The detection threshold is made adaptive according to the information provided by the noise level estimator in order to keep a fixed false-alarm probability. Asymptotic performance characteristics are obtained indicating relationships among the basic system parameters such as the reference noise sample size and the underlying noise statistics. It is shown that, as the reference noise sample size is made sufficiently large, the adaptive threshold detector attains the performance of a corresponding locally optimum detector for detecting the weak signal were the noise level known.     

Efficient robust AMF using the FRACTA algorithm

The FRACTA algorithm has been shown to be an effective space-time adaptive processing (STAP) methodology for the airborne radar configuration in which there exists nonhomogeneous clutter, jamming, and dense target clusters. Further developments of the FRACTA algorithm are presented here in which the focus is on the robust, efficient implementation of the FRACTA algorithm. Enhancements to the FRACTA algorithm include a censoring stopping mechanism, an alternative data blocking approach for adaptive power residue (APR) censoring, and a fast reiterative censoring (RC) procedure. Furthermore, a coherent processing interval (CPI) segmentation scheme for computing the adaptive weights is presented as an alternative approach to computing the adaptive matched filter (AMF) weight vector that allows for lower sample support and reduced computational complexity. The enhanced FRACTA algorithm, denoted as FRACTA.E, is applied to the KASSPER I challenge datacube which possesses dense ground target clusters that are known to have a significant deleterious effect on standard adaptive matched filtering (AMF) processors. It is shown that the FRACTA.E algorithm outperforms and is considerably more computationally efficient than both the original FRACTA algorithm and the standard sliding window processing (SWP) approach. Furthermore, using the KASSPER I datacube, the FRACTA.E algorithm is shown to have the same detection performance as the clairvoyant algorithm where the exact range-dependent clutter covariance matrices are known.     

Mean-Level Detection of Nonfluctuating Signals

Analysis of the performance of a mean-level threshold in the detection of nonfluctuating signals is performed. Formulas for the probability of detection are derived and a simple recursive method that can be used for computations is described. Binary integration is discussed, and it is shown that the loss in sensitivity due to the use of an adaptive threshold followed by binary integration is only a fraction of a decibel when compared with optimum binary integration. Binary integration results are given for both fluctuating and nonfluctuating signals.     

Cumulant-based blind optimum beamforming

Sensor response, location uncertainty, and use of sample statistics can severely degrade the performance of optimum beamformers. We propose blind estimation of the source steering vector in the presence of multiple, directional, correlated or coherent Gaussian interferers via higher order statistics. In this way, we employ the statistical characteristics of the desired signal to make the necessary discrimination, without any a-priori knowledge of array manifold and direction-of-arrival (DOA) information about the desired signal. We then improve our method to utilize the data in a more efficient manner. In any application, only sample statistics are available, so we propose a robust beamforming approach that employs the steering vector estimate obtained by cumulant-based signal processing. We further propose a method that employs both covariance and cumulant information to combat finite sample effects. We analyze the effects of multipath propagation on the reception of the desired signal. We show that even in the presence of coherence, cumulant-based beamformer still behaves as the optimum beamformer that maximizes the signal-to-interference-plus-noise ratio (SINR). Finally, we propose an adaptive version of our algorithm simulations demonstrate the excellent performance of our approach in a wide variety of situations     

Adaptive detection schemes in compound-Gaussian clutter

Radar detection of coherent pulse trains embedded in compound-Gaussian disturbance with partially known statistics is discussed. We first give a thorough derivation of two recently proposed adaptive detection structures. Next, we derive a different detection scheme exploiting the assumption that the clutter is wide-sense stationary. Resorting to the theory of circulant matrices, in fact, we demonstrate that the estimation of the structure of the clutter covariance matrix can be reduced to the estimation of its eigenvalues, which in turn can be (efficiently) done via fast Fourier transform codes. After a thorough performance assessment, mostly carried on via computer simulations, the results show that the newly proposed detector achieves better performance than the two previously introduced adaptive detectors. Moreover, a sensitivity analysis shows that, even though this detector does not strictly guarantee the constant false alarm rate property with respect to the clutter covariance matrix, it is robust, in the sense that its performance is only slightly affected by variations in the clutter temporal correlation     

NEW METHOD FOR REDUCED RANK STAP—NON CLUTTER CHANNEL METHOD

Space- time adaptive processing(STAP) is aleading technology candidate for improving detec-tion performance of advanced airborne early warn-ing radar.In practical radar systems,the optimumfully adaptive space- time processing[1] cannot al-ways be implemented because of the computationalcomplexity,so the design of suboptimum proces-sors has been one of the key topics in STAP.Sev-eral reduced- rank STAP methods have been pro-posed in recent years.For example,based on thegeneralized sidelobe…     

Detection Performance of a Mean-Level Threshold

The problem of detecting signals in nonstationary clutter is met by presenting a mean-level or adaptive threshold which adjusts to the changing background level. Such a threshold performs better than a fixed threshold that must be set for the highest amplitude clutter. However, the mean-level threshold does not perform as well for stationary noise as a fixed threshold set at the proper value. One measure of effectiveness of an adaptive threshold is its performance in stationary noise (compared to the optimum fixed threshold) for a specified speed of response. For the mean-level threshold, a simple mathematical solution is found for the detection probability when the noise is stationary and the signal scintillates rapidly. The performance is evaluated for a wide range of mean-level-threshold time constants and for several false-alarm probabilities. The results are presented graphically. As an example, the mean-level threshold suffers 3 dB in detectability (equivalent signal-to-noise ratio) in the presence of stationary noise as compared to the optimum fixed threshold for 50-percent probability of detection, false-alarm probability of 10-8, and an adjustment time of 15 times the signal duration.     

Transition control of a tail-sitter unmanned aerial vehicle with L1 neural network adaptive control

The main task of this work is to design a control system for a small tail-sitter Unmanned Aerial Vehicle(UAV) during the transition process. Although reasonable control performance can be obtained through a well-tuned single PID or cascade PID control architecture under nominal conditions, large or fast time-varying disturbances and a wide range of changes in the equilibrium point bring nonlinear characteristics to the transition control during the transition process, which leads to control prec...     

基于小生境遗传算法的分布式OS-CFAR检测系统优化与性能分析

 利用小生境遗传算法,对不同检测窗长度和检测信噪比的三传感器分布式 OS-CFAR检测系统进行了优化设计,给出了一组针对不同检测环境与融合方式的搜索结果。分析表明,对于非一致环境下分布式 OS-CFAR检测系统,小生境遗传算法是一种良好的优化算法。利用搜索结果,研究了不同融合方式下环境变化对分布式 OS-CFAR检测系统的性能影响,结果表明,“或”融合对检测环境的非一致变化具有较强的鲁棒性,而“3选2”融合和“与”融合对检测环境的变化比较敏感。     

Analysis of an adaptive CFAR detector in non-Gaussian interference

Coherent signal detection in non-Gaussian interference is presently of interest in adaptive array applications. Conventional array detection algorithms inherently model the interference with a multivariate Gaussian random vector. However, non-Gaussian interference models are also under investigation for applications where the Gaussian assumption may not be appropriate. We analyze the performance of an adaptive array receiver for signal detection in interference modeled with a non-Gaussian distribution referred to as a spherically invariant random vector (SIRV). We first motivate this interference model with results from radar clutter measurements collected in the Mountain Top Program. Then we develop analytical expressions for the probability of false alarm and the probability of detection for the adaptive array receiver. Our analysis shows that the receiver has constant false alarm rate (CFAR) performance with respect to all the interference parameters. Some illustrative examples are included that compare the detection performance of this CFAR receiver with a receiver that has prior knowledge of the interference parameters     

A novel target detection approach based on adaptive radar waveform design

To resolve problems of complicated clutter, fast-varying scenes, and low signal-clutterratio (SCR) in application of target detection on sea for space-based radar (SBR), a target detection approach based on adaptive waveform design is proposed in this paper. Firstly, complicated sea clutter is modeled as compound Gaussian process, and a target is modeled as some scatterers with Gaussian reflectivity. Secondly, every dwell duration of radar is divided into several sub-dwells. Regular linear frequency modulated pulses are transmitted at Sub-dwell 1, and the received signal at this sub-dwell is used to estimate clutter covariance matrices and pre-detection. Estimated matrices are updated at every following sub-dwell by multiple particle filtering to cope with fast-varying clutter scenes of SBR. Furthermore, waveform of every following sub-dwell is designed adaptively according to mean square optimization technique. Finally, principal component analysis and generalized likelihood ratio test is used for mitigation of colored interference and property of constant false alarm rate, respectively. Simulation results show that, considering configuration of SBR and condition of complicated clutter, 9 dB is reduced for SCR which reliable detection requires by this target detection approach. Therefore, the work in this paper can markedly improve radar detection performance for weak targets.     

两种自适应方向图峰值副瓣控制方法比较

自适应阵列（或称自适应波束形成）目前已广泛应用到雷达、声纳和通信领域中用来抑制各种干扰（有意的干扰，杂波干扰和多用户干扰等）。在雷达应用中，为了减轻脉冲欺骗式干扰或旁瓣目标并利用单脉冲雷达来准确测量目标波达方向．要求自适应方向图具有低副瓣和稳定的主瓣形状。在实际应用中，各种失配误差将降低自适应阵列的性能．这些误差包括由于目标的波达方向不精确引起的信号指向误差，由通道失配和位置扰动引起的阵列校准误差和由小样本教引起的协方差矩阵估计误差。在此情况下，自适应波束形成的性能大大下降（干扰抑制性能变差。主瓣失真和高的副瓣）。已提出了一种基于二次约束的集成峰值副瓣控制（integrated peak sidelobe control，简称IPSC）方法。该方法可以精确地控制峰值副瓣电平并产生具有稳定的主瓣形状的自适应方向图。研究IPSC中目标信号的影响和信号消除方案以进一步提高IPSC的性能。并将IPSC方法和最新提出的基于二阶锥规划（second-order cone programming，简称SOCP）的分布式峰值副瓣控制（distfibuted peak sidelobe control，简称为DPSC）新方法在性能上进行了比较。仿真结果表明。在干扰抑制性能和方向图控制质量方面IPSC比DPSC性能优越。此外IPSC比DPSC计算高效。     

On adaptive multiband signal detection with the SMI algorithm

In a nonstationary and/or nonhomogeneous interference environment, an adaptive system for target detection may suffer a severe performance degradation due to the lack of a sufficient amount of data from which the system can learn (estimate) the statistics of the environment. The detection performance of an adaptive system, which employs a frequency diversity (multiband) signaling waveform and a multiband sample matrix inversion algorithm (SMI), is analyzed. By comparison with the corresponding single-band system under the chosen system constraint, it is shown that the multiband system can significantly outperform the single band when the amount of data available from a single frequency band is severely limited by the environment     

Adaptive resolution of mainlobe and sidelobe detections using model order determination

This work presents the development and performance evaluation of a methodology for distinguishing between mainlobe and sidelobe detections that arise in adaptive radar systems operating in adverse environments. Various adaptive detection test statistics such as the adaptive matched filter (AMF), the generalized likelihood ratio test (GLRT), and adaptive coherence estimate (ACE), and combinations of these, have been previously analyzed with respect to their sidelobe rejection capabilities. In contrast to these methods which are based on detecting a single target with known direction and Doppler, the present method uses model order determination techniques applied to the AMF or GLRT data observed over the range of unknown angle and Doppler parameters. The determination of model order, i.e., the number of signals present in the data, is made by using least-squares model fit error residuals and applying the Akaike Information Criterion (AIC). Comprehensive computer simulation results are presented which demonstrate substantial improvement in sidelobe rejection performance and detections of multiple sources compared with previous methods.     

Design and analysis of a knowledge-aided radar detector for doppler processing

In this paper we discuss the combined use of a priori information and adaptive signal processing techniques for the design and the analysis of a knowledge-aided (KA) radar receiver for Doppler processing. To this end, resorting to the generalized likelihood function (GLF) criterion (both one-step and two-step), we design and assess data-adaptive procedures for the selection of training data. Then we introduce a KA radar detector composed of three elements: a geographic-map-based data selector, which exploits some a priori information concerning the topography of the observed scene, a data-adaptive training selector which removes dynamic outliers from the training data, and an adaptive radar detector which performs the final decision about the target presence. The performance of the KA algorithm is analyzed both on simulated as well as on real radar data collected by the McMaster University IPIX radar. The results show that the new KA system achieves a satisfactory performance level and can outperform some previously proposed adaptive detection schemes     

Theory of partially adaptive radar

This work extends the recently introduced cross-spectral metric for subspace selection and dimensionality reduction to partially adaptive space-time sensor array processing. A general methodology is developed for the analysis of reduced-dimension detection tests with known and unknown covariance. It is demonstrated that the cross-spectral metric results in a low-dimensional detector which provides nearly optimal performance when the noise covariance is known. It is also shown that this metric allows the dimensionality of the detector to be reduced below the dimension of the noise subspace eigenstructure without significant loss. This attribute provides robustness in the subspace selection process to achieve reduced-dimensional target detection. Finally, it is demonstrated that the cross-spectral subspace reduced-dimension detector can outperform the full-dimension detector when the noise covariance is unknown, closely approximating the performance of the matched filter.