光电探测设备功放板故障分析

针对某型飞机光电探测设备温补调焦功放板烧蚀故障进行分析,查找故障原因,并对由内部连接器电气特性发生改变引发连锁反应致使多路电源短路故障进行排除,对相应设计提出改进建议,为提高光电探测设备工作的可靠性提供参考。     

某型机载光电设备激光校靶技术方法研究

以某型机载光电探测设备为研究对象,通过对机载光电装备的外场激光校靶工作机理和测试方法的研究分析,采用先进的多光谱采集技术和图像算法技术,实现兼容多型机的机载光电设备激光校靶方法。该方法能大幅提高检测效率和测试精度,有效规避测试中的人为差错和安全隐患,对加强外场保障能力和图像技术在机载设备维护中的推广具有显著意义。     

不完全量测下一类非线性光电跟踪系统滤波器设计

 随着不完全量测条件下探测概率的下降,传统光电跟踪系统的跟踪性能显著降低。为此,本文考虑将俯仰和偏航两个方向的角速度量测引入传统光电跟踪系统,并设计了不完全量测下基于置信度融合的目标跟踪滤波器。首先针对这类新型的光电跟踪系统建立了系统的量测模型,利用嵌套条件方法推导了转换量测误差前两阶矩的一致性估计;然后针对位置探测通道与角速度探测通道的4种数据探测情形设计了4个子滤波器,并根据探测通道的探测情况计算出各子滤波器的置信度,进而对各子滤波器的输出按置信度进行加权融合,得到了跟踪滤波器的全局输出;最后给出了非线性跟踪系统统计意义下的Cramer-Rao下界(CRLB)。Monte-Carlo仿真表明：在不完全量测下,相比传统光电跟踪系统,附加角速度量测的光电跟踪系统的跟踪性能有了显著提高,并且滤波器估计误差均方差(RMSE)已逼近非线性跟踪系统统计意义下的CRLB。     

惯性技术在光电探测技术中的应用

惯性技术是通过惯性传感器敏感载体运动信息,自主建立运动载体姿态基准的手段。随着现代光电探测技术的不断发展,光电武器装备在侦察、监视、定位、导航和通信等场合的应用越来越广泛,惯性技术在光电探测技术与光电设备中的作用也越来越重要。本文介绍了光电探测技术和典型机载光电系统、惯性技术的发展历程,详细介绍了惯性技术在光电探测技术中的应用情况,分析了其对作战方式和作战效能所带来的变化和提升,阐述了惯性技术在光电探测技术应用的未来发展需求和趋势。     

影响激光光斑测量系统作用距离因素分析

针对CCD器件对1．06μm激光信号探测的难点,提出了利用红外变像管加CCD摄像机的二次光电成像方法。描述了激光光斑成像系统的测量原理,对影响测量系统作用距离的因素作了详细的分析,给出了二次光电成像系统优化设计参数及试验结果。     

应用于机载光电设备的新型材料综述

机载光电设备是飞机最基本的任务执行单元之一.机载光电系统技术的提高相应大大地提高了各类飞机的作战使用性能.通过光电系统及内在的光电传感器可对战区进行侦察、监视、目标捕获及识别、目标测距、武器投放的目标指示、作战效果评估,战场障碍物探测、核生物和化学的探测和取样等等.     

基于实时预测轨迹修正的共轴跟踪观测方法

针对光电设备跟踪观测轨迹可预测目标,提出并实现了基于实时预测轨迹修正的新型跟踪算法。从电视观测信息中实时解算出轨迹偏差的位置分量与速度分量并修正预测轨迹,引导仪器运动。应用该方法,在被观测目标电视探测不理想时有效提高了跟踪可靠性,降低了光电跟踪设备对电视探测能力的苛刻要求。即使电视探测短时出现困难,也能保证一定精度。本文给出了实时轨迹修正跟踪方法的构成原理与试验结果,并与一般电视跟踪方法进行了对比。     

直九型直升机基准桨叶共锥度校准技术研究

研究了桨叶对激光斩波标定算法,采用高速的CPLD逻辑阵列、36位计数器和高速DSP嵌入式信号处理系统以及通过算法程序引入非线性误差补偿来校准基准桨叶的共锥度参数;建立了直九型基准桨叶共锥度参数校准装置标定系统,其机理为利用模拟桨叶切割激光束,通过光电器件探测这一周期性的光电信号,从而对激光器定位参数进行标定;通过这套系统实现了基准桨叶共锥度参数的校准和溯源。     

军用飞机维修性评价数字化平台方案构建及应用

维修性设计是军用飞机保障特性设计重要工作之一,随着数字化设计手段的广泛应用,为适应军用飞机数字化设计平台环境,满足维修性设计评价的型号工作需求,本文以数字化产品系统为基础,构建了包括产品数字化设计、维修任务仿真、维修性分析评价为一体的维修性评价平台。针对某型飞机光电探测设备整体组件拆装情况,依据构建的维修性评价数字化平台实际工作流程,本文最后介绍了在飞机设计阶段,如何开展对光电探测设备整体组件拆装的维修性验证评价。     

亚毫米级弹丸光电探测技术

本文在片光遮挡式弹丸探测技术基础上发展了光电阵列探测亚毫米级弹丸技术,论述了光电阵列探测亚毫米弹丸的技术原理,详细介绍了光电阵列探测系统的探测光路和探测电路设计方案,研制了光电阵列探测系统的动态试验验证装置。在超高速碰撞靶上开展了动态验证试验,试验结果表明,采用光电阵列探测技术,大幅提高了弹丸信号的信噪比,能够可靠探测直径为0．6mm 的高速弹丸,通过分析表明该技术能可靠应用于直径为0．1mm高速弹丸的探测。     

有翼高超声速再入飞行器气动设计难点问题

有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。     

Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.     

突破技术趋同，波音再现竞争优势

 波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面：电子化（e-Enabled）运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境（GCE）。     

ν-gap度量及其在飞行控制律评估中的应用

 传统控制律评估方法主要用于单输入单输出（SISO）系统，且对模型参数摄动考虑不够全面,针对这些不足，研究了ν-gap度量方法。在介绍系统广义稳定裕度相关概念的基础上，给出了ν-gap度量的定义、特点和性质以及近似摄动模型的计算，提出ν-gap度量评估控制律的步骤。实例结果表明，该方法不仅克服了上述传统评估方法的缺陷，而且还有根据所求的各摄动影响情况忽略影响小的元素，以减少计算量及可以找到最坏情况下的参数摄动组合等优点。     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

临近空间飞行器测控与信息传输系统频段选择

 临近空间飞行器是高性能信息化武器平台,测控（TT&;C）与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联（ITU）国际标准、高速数传、接收信噪比（SNR）、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。     

基于弯曲激波压缩系统的高超声速进气道反设计研究进展

总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。     

Integrated Entry Guidance for Reusable Launch Vehicle

A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertain-ties are presented to demonstrate the capacity and reliability of this method.     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

(高)超声速流动试验技术及研究进展

近年来,与高速飞行器相关的(高)超声速流动受到了极大的关注。这类流动所具有的非定常性、强梯度和可压缩性对试验方法和风洞设计技术提出了挑战。超声速纳米示踪平面激光散射(NPLS)技术是由作者所在团队研发的非接触光学测试技术。它能够以较高的空间分辨率来揭示超声速三维流场的一个瞬态剖面的时间解析的流动结构。介绍了NPLS技术以及基于NPLS开发的密度场测量、雷诺应力测量和气动光学波前测量等方法,并回顾了这些技术在超声速边界层、超声速混合层、超声速压缩拐角、激波/边界层相互作用和光学头罩绕流等流动中的应用,清晰地再现了边界层、混合层、激波等典型流场结构及其时空演化特性。另外,为了模拟和研究高空大气条件下边界层自然转捩和超声速混合层的转捩特性,介绍了高超声速静风洞、超-超混合层风洞的设计技术以及层流化喷管的设计方法。