机载火控雷达距离拖引目标的交互式多模型跟踪方法

针对机载火控雷达中可能出现的距离门拖引欺骗,给出了一种基于交互式多模型的目标跟踪方法。把该方法和常规的单目标跟踪方法进行了仿真比较。结果表明,该方法能充分利用欺骗回波测量,对释放距离拖引欺骗干扰的目标维持较稳定地跟踪,并能获得较高的目标跟踪精度。     

干扰机应对自适应捷变频雷达的一种干扰方法

雷达干扰机与雷达抗干扰相互促进发展,现在自适应捷变频雷达具有很强的抗窄带瞄准式干扰和宽带阻塞式干扰的能力。文章中提出了现有干扰机对自适应捷变频雷达实施干扰的一种新方法及实施方案——频谱拖引。     

雷达/红外复合导引头抗干扰跟踪方法

为了有效应对强噪声干扰、箔条干扰以及红外诱饵干扰,提出了一种雷达/红外复合导引头抗干扰跟踪方法.该方法通过导引头观测信息关联度的检测、新息方差迹值的比较,进而对于扰进行判断,然后选择合适的导引头工作模式对目标进行跟踪.仿真结果表明,所提出的协同跟踪方法不仅可以保证较高的跟踪精度,而且可以保证在干扰环境下对目标跟踪的连续性与稳定性.     

捷联导引头隔离度分析与寄生回路滤波器设计

分析了捷联导引头惯性视线角速度提取的间接解耦方法与直接解耦方法的制导回路特点以及两种方法的等效关系,推导了描述捷联导引头隔离度的表达式并讨论了隔离度对制导回路的影响。通过设计寄生回路滤波器使导引头测量信息传递通道与姿态测量信息传递通道的时频特性一致,抑制信号测量与传递过程中的噪声干扰。最后通过仿真算例验证了滤波器的有效性。     

一种基于DRFM和数字信道化技术的 宽带雷达目标干扰模拟器设计

提出了一种DRFM和数字信道化技术的宽带雷达目标干扰模拟器设计方案,详细讨论了宽带雷达信号的数字信道化接收算法和基于DRFM的扩展目标/干扰生成方法。仿真分析结果表明,该方案可以实现1 GHz带宽的雷达导引头目标干扰信号模拟,并可推广用于宽带雷达导引头干扰机和宽带雷达导引头数据采集系统设计。     

基于结构不确定性的非线性鲁棒制导律设计

根据多普勒雷达导引头和红外成像导引头多模制导导弹弹道中段制导信息精度的特点,以非线性鲁棒控制理论为依据,设计了一种制导律.仿真结果表明,该制导律对弹目相对距离测量干扰有较好的鲁棒性,对目标大机动也有鲁棒性.因此,这种制导律可以作为多普勒雷达导引头和红外成像导引头多模制导导弹弹道中段的制导律使用.     

主动雷达抗拖曳式诱饵干扰的角度提取方法

通过对拖曳式有源雷达诱饵干扰的分析,得到了平衡状态下对导引头测角值进行数据积累且取均值后,导引头将指向大功率辐射源的结论.在诱饵信号从功率上压制载机回波信号的前提下,对导引头处于平衡状态时的测量角公式进行数学推导进而求得小功率辐射源(载机)的角度.结合比例导引规律,通过飞行弹道仿真验证了雷达型空空导弹应用上述方法可获得...     

一种用于干扰效果评估的闭环制导模拟方法

针对干扰效果评估需求,提出了一种简便易行的闭环制导模拟方法,即将导引头装在飞艇上,利用导引头测量输出的目标信息,按照导引律的要求,实时引导和控制飞艇向目标方向做制导飞行,以模拟闭环制导控制过程.利用电视导引头搭载飞艇,设定直接瞄准法导引律,完成了多个航次的闭环制导飞行试验.结果表明：飞艇飞行航迹与直接瞄准法导引律要求的理论航线基本一致,飞艇纵轴与目标视线的夹角以及导引头测量输出的离轴角均小于1°,也满足直接瞄准法导引律的要求,从而初步验证了所提出闭环制导模拟方法的可行性.这种作制导飞行的飞艇和导引头,可形象直观地演示、验证干扰效果.     

MPDAF方法和DF方法在抗距离拖引干扰中的应用

利用Monte Carlo方法,对修正的概率数据互联滤波(MPDAF)和分解融合方法(DF)在有虚警测量的环境下抗距离拖引干扰的性能进行了分析和比较.研究表明,在虚警测量较少的情况下,采用MPDAF算法和DF算法可以有效地抗距离后拖欺骗干扰,实现对目标的跟踪,但是在虚警测量较多的情况下,采用DF方法可以较好地对抗距离后拖欺骗干扰,实现对目标的跟踪,而MPDAF方法则基本失去作用.     

协同制导导引头最大指向角误差分析

在协同制导条件下,建立了导引头最大预定指向角误差模型,分析了各种因素对协同制导条件下导引头最大预定指向角误差的影响。结果表明,雷达测角误差和系统时延是影响协同制导中末交班导引头最大指向角误差的主要因素。     

有翼高超声速再入飞行器气动设计难点问题

有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。     

Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

突破技术趋同，波音再现竞争优势

 波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面：电子化（e-Enabled）运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境（GCE）。     

临近空间飞行器测控与信息传输系统频段选择

 临近空间飞行器是高性能信息化武器平台,测控（TT&;C）与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联（ITU）国际标准、高速数传、接收信噪比（SNR）、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。     

基于弯曲激波压缩系统的高超声速进气道反设计研究进展

总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

(高)超声速流动试验技术及研究进展

近年来,与高速飞行器相关的(高)超声速流动受到了极大的关注。这类流动所具有的非定常性、强梯度和可压缩性对试验方法和风洞设计技术提出了挑战。超声速纳米示踪平面激光散射(NPLS)技术是由作者所在团队研发的非接触光学测试技术。它能够以较高的空间分辨率来揭示超声速三维流场的一个瞬态剖面的时间解析的流动结构。介绍了NPLS技术以及基于NPLS开发的密度场测量、雷诺应力测量和气动光学波前测量等方法,并回顾了这些技术在超声速边界层、超声速混合层、超声速压缩拐角、激波/边界层相互作用和光学头罩绕流等流动中的应用,清晰地再现了边界层、混合层、激波等典型流场结构及其时空演化特性。另外,为了模拟和研究高空大气条件下边界层自然转捩和超声速混合层的转捩特性,介绍了高超声速静风洞、超-超混合层风洞的设计技术以及层流化喷管的设计方法。     

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.