中航工业2015年质量工作会议在北京召开

<正>本刊综合消息2015年1月20日,中航工业2015年质量工作会议在北京召开。上级机关和用户代表,中航工业董事长、党组书记林左鸣,总经理、党组副书记谭瑞松,副总经理、党组成员李玉海、张新国、李方勇、李本正出席会议。中航工业总工程师、总经理助理、副总工程师、副总法律顾问,各直属单位、成员单位主要负责同志、管理者代表,各型号项目总师、质量、设计、生产、供应、服务等部门负责同志共计     

安徽开乐专用车辆股份有限公司

安徽开乐专用车辆股份有限公司是中国航空工业集团公司的控股子公司,坐落于皖西北重镇、皖北交通枢纽——安徽阜阳。公司注册资金13265万,资产总额117103万,拥有员工2200余人,其中工程技术人员180多人,高级职称15人,中级职称52人、外聘技术专家8人。公司拥有7条改装车生产线,覆盖半挂车、混凝土搅拌车、运加油车、粉罐车、冷藏保温车、防爆车、环卫车等十几个系列车型,产品畅销国内22个省、直辖市和自治区,并远销非洲、东南亚、南美洲、俄罗斯等近10个国家。     

飞行员 管制员 指挥协调员全面交流合作项目启动

飞行员、空中交通管制员、机场指挥协调员承担了连接航班保障的三个关键环节的安全指挥管理职责,三方协作确保航班空中、地面服务正常、顺畅。由东航集团公司、民航局空管局、机场集团主办,三方团委承办的"飞行员、管制员、指挥协调员全面交流合作项目启动仪式"于4月18日在上海举行。民航局空管局局长王利亚、党委书记王战斌、副局长朱士新、党委副书记范芸芸,东航集团党组书记李军、党组副书记、股份公司总经理马须伦,东航集团副总经理、纪检组组长刘江波,上海机场集团公司党委书记、副董事长何卫国,总裁、党委副书记李德润,党委副书记、副董事长、副总裁朱宁一等出席了启动仪式。     

春日何处不樱花 樱花季玩转日本

此前,日本地震了、海啸了、核泄露了、核辐射了。曾经,我们震惊了、恐慌了、抢盐了,然后"恐日"了——怕日本进口食品,更怕去日本旅游。现在,安全了、春天了、樱花了,我们也坐不住了。其实,我们不仅可以去"樱花"。在日本,还可以去"温泉"、去"古建筑"、去"美味",甚     

在强化管理的实践中提高民航和谐度

中国民航在新一轮发展中尚存在诸多不和谐和的地方,这有体制、机制问题,有人力资源、经费短缺问题,也有设施设备、技术等问题,将直接影响发展进程,有些甚至成了发展的瓶颈。诸如此类,作为民航基层单位是很难解决的,最现实、也是最有针对性的,那就是深化管理,以管理促和谐,以和谐强管理,尽快地从当前粗放式管理走向规范化、制度化、科学化管理的轨道上来。构建和谐民航,从其要素的结构上讲,就是民航各系统、领域、单位、部门乃至各环节的关系稳定、协调、有序。作为促进和谐重要手段之一的管理,其基本职能就是组织、计划、协调、监督、控制等…     

北京华瑞:专业、专注

北京华瑞飞机部件维修服务有限公司,作为国内较早的航空部件修理企业,多年来主要从事自动飞行控制系统、舱压控制系统、仪表、电源系统、灯光等系统各类机载电子、电气、附件的维修。同时,还承担着空调系统、水系统、防冰系统、气源系统附件的修理。其中一些项目,包括 B737 SCU、B747 BSCU、FCSV,     

国防CAE软件应用调查报告

CAE,即计算机辅助工程,主要指用计算机对所设计的产品的功能、性能与可靠性等进行计算和优化设计,对未来的工作状态和运行环境进行模拟仿真,并优化设计方案,以证实未来工程产品的实际性能。CAE可以用于静/动力学分析、流体力学分析、振动/弹性分析、热传导分析、噪声分析、辅助实验设计和虚拟样机制造等方面,并为上述领域的工作带来革命性的变化。目前,CAE工具已成为工程师们基本的工作手段,很多领域已是必须依靠CAE才能有效工作,例如在航空领域中,由于对产品高性能和高可靠性的需求,因此对CAE仿真平台也提出了更高的要求,航空企业迫切需要通过高性能的仿真平台对不同部件进行系统开发,以便在设计的初期阶段就可以对系统关键属性进行仿真分析。本次调查以问卷形式,面向CAE软件供应商、相关领域用户和相关研究机构3个方面展开。在CAE供应商方面,主要面向在国防领域有较多应用的供应商,如:安世亚太、ANSYS、ABAQUS、MSC、LMS、ESI、SAMTECH、DS、Altair、Solidworks和紫瑞CAE等;相关领域用户主要有:航空制造工程研究所、南京液压机电研究所、第一飞机设计研究院、沈飞集团、齐二机床集团、航天一院、航天五院...     

《推进技术》投稿须知

1·本刊面向国内外征稿,凡属各类火箭发动机、吸气式发动机、组合发动机、推进剂及非化学推进系统的理论研究、设计、制造、试验和军民两用技术方面的学术论文、研究简报和专论等,欢迎投稿。2·来稿应具备创新性、实用性和科学性,务求论点明确、论据充分、数据准确、文字精炼、逻辑严谨。文稿中须有标题、作者名、作者单位名称、摘要、关键词等项及其对应的英文项,正文还应有引言和结论。参考或引用他人作品,必须按《著作权法》有关规定注明作者姓名、作品名称及其来源。3·投稿论文页面为A4,正文用5号宋体,投稿论文经过作者单位保密审查,确定不涉密后,发邮件至tjjs@sina·com,注明“投稿”。随稿提供署名作者信息(个     

《推进技术》投稿须知

1·本刊面向国内外征稿,凡属各类火箭发动机、吸气式发动机、组合发动机、推进剂及非化学推进系统的理论研究、设计、制造、试验和军民两用技术方面的学术论文、研究简报和专论等,欢迎投稿。2·来稿应具备创新性、实用性和科学性,务求论点明确、论据充分、数据准确、文字精炼、逻辑严谨。文稿中须有标题、作者名、作者单位名称、摘要、关键词等项及其对应的英文项,正文还应有引言和结论。参考或引用他人作品,必须按《著作权法》有关规定注明作者姓名、作品名称及其来源。3·投稿论文页面为A4,正文用5号宋体,投稿论文经过作者单位保密审查,确定不涉密后,发邮件至tjjs@sina·com,注明“投稿”。随稿提供署名作者信息(个     

《推进技术》投稿须知

1·本刊面向国内外征稿,凡属各类火箭发动机、吸气式发动机、组合发动机、推进剂及非化学推进系统的理论研究、设计、制造、试验和军民两用技术方面的学术论文、研究简报和专论等,欢迎投稿。2·来稿应具备创新性、实用性和科学性,务求论点明确、论据充分、数据准确、文字精炼、逻辑严谨。文稿中须有标题、作者名、作者单位名称、摘要、关键词等项及其对应的英文项,正文还应有引言和结论。参考或引用他人作品,必须按《著作权法》有关规定注明作者姓名、作品名称及其来源。3·投稿论文页面为A4,正文用5号宋体,投稿论文经过作者单位保密审查,确定不涉密后,发邮件至tjjs@sina·com,注明“投稿”。随稿提供署名作者信息(个     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.     

Preparation of Highly Dispersed Antimony-doped Tin Oxide Nano-powder via Ion-exchange Hydrolysis of SnCl4 and SbCl3 and Azeotropic Drying

Antimony-doped tin hydroxide colloid precipitates have been synthesized by hydrolysis of SnCl4 and SbCl3 using: (1) an ion-exchange hydrolysis to remove chlorine ions, and (2) isoamyl acetate as an azeotropic solvent to obviate water. The obtained dried powder is of high dispersivity without any need for further grinding. The size and dispersivity of the final particles are investigated with the aid of TG-DTA, BET, XRD and TEM. After having calcined, the antimony-doped tin oxide nanopowder possesses a tetragonal rutile structure with high dispersivity, uniform particles and low hard agglomeration.     

Effects of Mo on the Microstructure and Hydrogen Sorption Properties of Ti-Mo Getters

The effects of Mo on the microstructure evolution, porosity and hydrogen sorption properties of Ti-Mo getters are investigated in this work. The results show that the addition of Mo prolongs the densification process of Ti-Mo getters and results in a significant amount of sintered pores. With the Mo content increasing, the porosity of getters firstly increases reaching the maximum value as it at- tains about 7.5wt.%, and then drops. At the room temperature, the hydrogen sorption property of getters increases progressively with the Mo content increasing, but the tendency is not very clear before its content lies below 2.5wt.%. When the Mo content achieves about 7.5wt.%, the hydrogen sorption property proves to be the best. The discussion is made about the above mentioned phenomena inclusive of hydrogen sorption properties of getters under different activation conditions (from 500-750 ℃).     

超声速燃烧数值模拟中的湍流与化学反应相互作用模型

高精度数值模拟有助于理解超声速湍流燃烧中湍流与化学反应的相互作用,可为发动机燃烧室等工程应用设计提供可靠的预测模型。除直接数值模拟外,目前在湍流燃烧应用中使用的大涡模拟和雷诺平均Navier-Stokes模拟均需要借助模型模化发生在湍流小尺度上的流动与化学反应过程对湍流大尺度运动的影响。现有的湍流与化学反应相互作用模型大致可分为:火焰面类模型和概率密度函数类模型,2类模型在不同的应用中各自具有优势和局限性。此外,现有模型大都基于低马赫数燃烧,而超声速燃烧中通常会伴随快速混合、局部熄火和再着火以及激波等复杂过程,这为发展其中的湍流与化学反应相互作用模型提出了更多的挑战。     

适于低轨卫星IP网络的单核共享树组播算法(英文)

为了解决低轨卫星IP网络中现有典型源组播算法的信道资源浪费问题,本文提出了一套单核共享树组播算法,即核心群合并共享树(CCST)和加权核心群合并共享树(w-CCST)算法。CCST 算法包括动态近似中心(DAC)选核方法和核心群合并组播路径构建方法。DAC方法专为周期、规律运动的低轨卫星网络提出,不需要复杂的星上计算。在核心群合并方法中,以核节点作为初始核心群,通过核心群和剩余组成员的最短路径方法逐步扩展直至整棵组播树构建完成,从而使得组播树的树代价最小,大大提高了网络的带宽利用率和组播传输效率。w-CCST 算法中所提出的加权因子可以调整树代价和端到端传播时延之间的折衷程度,因此,可以通过调整加权因子来适度增大树代价、降低端到端传播时延以支持某些端到端时延要求苛刻的实时组播业务。最后,与低轨卫星 IP 网络中典型算法进行了性能比较,仿真结果说明,CCST 算法的平均树代价比其它算法显著降低,w-CCST 算法的平均端到端传播时延小于 CCST 算法。     

Jet Vectoring Control Using a Novel Synthetic Jet Actuator

A primary air jet vectoring control system with a novel synthetic jet actuator (SJA) is presented and simulated numerically. The results show that, in comparison with an existing traditional synthetic jet actuator, which is able to perform the duty of either “push” or “pull”, one novel synthetic jet actuator can fulfill both “push” and “pull” functions to vector the primary jet by shifting a slide block inside it. Therefore, because the new actuator possesses greater efficiency, it has potentiality to replace the existing one in various appli- cations, such as thrust vectoring and the reduction of thermal signature. Moreover, as the novel actuator can fulfill those functions that the existing one can not, it may well be expected to popularize it into more flow control systems.     

Nonlinear Adaptive Slewing Motion Control of Spacecraft Truss Driven by Synchronous V-gimbaled CMG Precession

The slewing motion control of a truss arm driven by a V-gimbaled control-moment-gyro (CMG) is a nonlinear control problem. The V-gimbaled CMG consists of a pair of gyros that must precess synchronously. The moment of inertia of the system, the angular momentum of the gyros and the external disturbances are not exactly known. With the help of feedback linearization and recursive Lyapunov design method, an adaptive nonlinear controller is designed to deal with the unknown items. Performance of the proposed controller is verified by simulation.     

An SOR Implicit Time-accurate Scheme in Calculating Unsteady Flows

A new time-accurate marching scheme for unsteady flow calculations is proposed in the present work. This method is the combination of classical Successive Over-Relaxation (SOR) iteration method and Jacobian matrix diagonally dominant splitting method of LUSGS. One advantage of this algorithm is the second-order accuracy because of no factorization error. Another advantage is the low computational cost because the Jacobian matrices and fluxes are only calculated once in each physical time step. And, the SOR algorithm has better convergence property than Gauss-Seidel. To investigate its accuracy and convergency, several unsteady flow computa- tional tests are carried out by using the proposed SOR algorithm. Roe’s FDS scheme is used to discritize the inviscid flux terms. Un- steady computational results of SOR are compared with the experiment results and those of Gauss-Seidel. Results reveal that the numerical results agree well with the experimental data and the second-order accuracy can be obtained as the Gauss-Seidel for unsteady flow computations. The impact of SOR factor is investigated for unsteady computations by using different SOR factors in this algorithm to simulate each computational test. Different numbers of inner iterations are needed to converge to the same criterion for different SOR factors and optimal choice of SOR factor can improve the computational efficiency greatly.