The Effect of a Pulsed Interference Signal on an Adaptive Array

The performance of a least mean square (LMS) adaptive array in the presence of a pulsed interference signal is examined. It is shown that a pulsed interference signal has two effects. First, it causes the array to modulate the desired signal envelope (but not its phase). Second, it causes the array output signal-to-interferenceplus-noise ratio (SINR) to vary with time. The desired signal modulation is evaluated as a function of signal arrival angles, powers and interference pulse-repetition frequency (PRF) and pulsewidth. It is shown that the signal modulation is small except when the interference arrives close to the desired signal. To evaluate the effect of the time-varying SINR, it is assumed that the array is used in a differential phase-shift keyed (DPSK) communication system. It is shown that the SINR variation causes a noticeable but not disastrous increase in the bit error probability.     

The Performance of an LMS Adaptive Array with Frequency Hopped Signals

The performance of an LMS adaptive array with a frequency hopped, spread spectrum desired signal and a CW interference signal is examined. It is shown that frequency hopping has several effects on an adaptive array. It causes the array to modulate both the amplitude and the phase of the received signal. Also, it causes the array output SINR (signal-to-interference-plus-noise ratio) to vary with time and thus increases the bit error probability for the received signal. Typical curves of the desired signal modulation and the time-varying SINR at the array output are presented. It is shown how the array performance depends on hopping frequency, frequency jump size, interference frequency, signal arrival angles, and signal powers.     

Adaptive Array Behavior with Sinusoidal Envelope Modulated Interference

The behavior of a LMS (least mean square) adaptive array with modulated interference is described. An interference signal with sinusoidal, double-sideband, suppressed-carrier modulation is assumed. It is shown that such interference causes the array to modulate the desired signal envelope but not its phase. The amount of the desired signal modulation is determined as a function of signal arrival angles and powers and the modulation frequency of the interference. Such interference also causes the array output signal-to-interference-plus-noise ratio (SINR) to vary with time. However, it is shown that when the desired signal is a digital communication signal, the averaged bit error probability is essentially the same as for continuous wave (CW) interference.     

Adaptive Array Behavior with Periodic Envelope Modulated Interference

A method is presented for determining the effects of envelope modulated interference on a least mean square (LMS) adaptive array. The interference is assumed to have periodic envelope modulation with a bandwidth that is small compared with the carrier frequency. For such interference, the method allows one to calculate the periodic steady-state behavior of the array weights and the resulting array performance. As an example, we compute the effects of an ordinary amplitude modulated (AM) interference signal on the array. It is shown that such interference causes the array to modulate the desired signal envelope but not its phase. With a differential phase-shift-keyed (DPSK) desired signal, AM interference is found to have about the same effect on bit error probability as CW interference.     

基于Kalman滤波的GPS/INS接收机自适应干扰抑制方法

 考虑到惯导信息辅助GPS(GPS/INS)接收机对干扰抑制实时性的要求,提出一种基于Kalman滤波的GPS/INS接收机自适应干扰抑制方法。自适应广义旁瓣相消(GSC)多采用低复杂度最小均方(LMS)算法更新权矢量,收敛速率较低,严重时会导致接收机定位中断。首先利用Householder变换构建GSC下支路的阻塞矩阵,用于阻塞任意二维阵型阵列接收的期望信号;再用Kalman滤波自适应更新下支路权矢量,从而有效提高阵列输出信干噪比(SINR)。理论分析和仿真结果说明本文方法可有效抑制干扰对接收机的影响,且具有实时性高的特点。     

Median cascaded canceller for robust adaptive array processing

A median cascaded canceller (MCC) is introduced as a robust multichannel adaptive array processor. Compared with sample matrix inversion (SMI) methods, it is shown to significantly reduce the deleterious effects of impulsive noise spikes (outliers) on convergence performance of metrics; such as (normalized) output residue power and signal to interference-plus-noise ratio (SINR). For the case of no outliers, the MCC convergence performance remains commensurate with SMI methods for several practical interference scenarios. It is shown that the MCC offers natural protection against desired signal (target) cancellation when weight training data contains strong target components. In addition, results are shown for a high-fidelity, simulated, barrage jamming and nonhomogenous clutter environment. Here the MCC is used in a space-time adaptive processing (STAP) configuration for airborne radar interference mitigation. Results indicate the MCC produces a marked SINR performance improvement over SMI methods.     

Analysis of an adaptive CFAR detector in non-Gaussian interference

Coherent signal detection in non-Gaussian interference is presently of interest in adaptive array applications. Conventional array detection algorithms inherently model the interference with a multivariate Gaussian random vector. However, non-Gaussian interference models are also under investigation for applications where the Gaussian assumption may not be appropriate. We analyze the performance of an adaptive array receiver for signal detection in interference modeled with a non-Gaussian distribution referred to as a spherically invariant random vector (SIRV). We first motivate this interference model with results from radar clutter measurements collected in the Mountain Top Program. Then we develop analytical expressions for the probability of false alarm and the probability of detection for the adaptive array receiver. Our analysis shows that the receiver has constant false alarm rate (CFAR) performance with respect to all the interference parameters. Some illustrative examples are included that compare the detection performance of this CFAR receiver with a receiver that has prior knowledge of the interference parameters     

The Effect of Differential Time Delays in the LMS Feedback Loop

The effect of differential time delay in the feedback loops of an LMS adaptive array is examined. Differential time delay is shown to have two effects on array performance. First, it causes the weights to oscillate during weight transients. Second, it degrades the output signal-to-interference-plus-noise ratio (SINR) from the array. Weight oscillation occurs when the phase shifts in the LMS loop are not matched at the signal carrier frequency. SINR degradation depends on signal bandwidth: the wider the bandwidth, the larger the degradation.     

Reference Loop Phase Shift in an N-Element Adaptive Array

Adaptive arrays based on the LMS algorithm require the generation of a reference signal which is usually derived from the array output. A particular problem associated with this technique is that of a phase shift in the reference signal loop. The effects of this phase shift on the performance of an N-element adaptive array are discussed. It is shown that a reference loop phase shift causes the array weights to cycle, thereby frequency translating the signals at the output. The weight-cycling frequency is related to various system parameters of an N-element array. In particular, it is observed that the cycling frequency increases as the number of antennas (N) increases.     

An Analysis of Helicopter Rotor Modulation Interference

In satellite-to-helicopter communications, interference exists on the incoming signal when the receiving antenna is located below the rotor blades. A bound is established for the performance of a coherent fixed-tone ranging system operating at L band in this interference environment. The scalar diffracted field beneath the rotating blades, at L band and above, is found to satisfy the criterion of Fresnel diffraction, and is computed using the techniques of Fourier optics. The diffracted field is expressed in terms of a narrow-band signal. The amplitude and phase components are calculated from a Fourier Series expansion using the FFT algorithm. The significant harmonics of the phase component of the interference combine with the baseband of the narrow-band, phase-modulated ranging signal. This results in CW interference, and in rearrangement of the first-order, sideband, ranging-tone channel powers. The degradation in ranging accuracy is evaluated by computing the signal-to-interference (SIR) ratio for a set of ranging tones. The post-detection (SIR)PD at the output of the correlator is shown to be a function of the amplitude of the phase harmonics of the interference, the relative difference between the ranging tone and interference center frequencies (a function of rotor speed), the rangetone modulation indices, and the post-detection filter noise bandwidth.     

LINEAR PREDICTION APPROACH IN AIRBORNE ADAPTIVE ARRAYS

ＬＩＮＥＡＲＰＲＥＤＩＣＴＩＯＮＡＰＰＲＯＡＣＨＩＮＡＩＲＢＯＲＮＥＡＤＡＰＴＩＶＥＡＲＲＡＹＳＳｕＪｉｅ；ＬｉＣｈｕｎｓｈｅｎｇ；ＺｈｏｕＹｉｎｑｉｎｇ（ＤｅｐａｒｔｍｅｎｔｏｆＥｌｅｃｔｒｏｎｉｃＥｎｇｉｎｅｅｒｉｎｇ，ＢｅｉｊｉｎｇＵｎｉｖｅｒ...     

数字闭环光纤陀螺的调制串扰误差

 通过分析数字闭环光纤陀螺的阶梯波调制信号与输出死区、周期噪声干扰及小角速度漂移的关系,提出了调制串扰误差的概念。指出调制信号与探测器输出信号之间的电交叉耦合及调制信号产生的调制误差是产生调制串扰误差的干扰源。将调制串扰通道模型简化为比例环节和部分积分环节,并和光纤陀螺理想模型结合,建立了光纤陀螺调制串扰误差模型,利用该模型推导出了产生死区的条件及周期噪声干扰和小角速度漂移造成的输出偏差表达式,并对周期噪声的幅值、频率与陀螺输出量级、带宽之间的关系进行了定量分析。调制串扰误差的仿真和实验结果与理论分析结果基本一致,验证了调制串扰误差模型的正确性。     

The Effect of Random Steering Vector Errors in the Applebaum Adaptive Array

The effect of random errors in the steering vector of an Applebaum adaptive array is examined. Each component of the steering vector is assumed to have a random error component uncorrelated between elements. The array output signal-to-interferenceplus-noise ratio (SINR) is computed as a function of the error variance. It is shown that the array output SINR becomes more sensitive to steering vector errors as more elements are added to the array and as the received desired signal power becomes larger. The variance of the steering vector error that may be tolerated depends on the required desired signal dynamic range. The larger the dynamic range that must be accommodated, the smaller the error variance must be.     

Blind GPS receiver with a modified despreader for interference suppression

The global positioning system (GPS) was designed to provide location estimates for various civilian and military applications using at least four satellites. Since GPS signals have a low signal-to-noise ratio (SNR), they also have a low signal-to-jammer ratio so that the accuracy of location estimates is influenced by cochannel interference and intentional jammers. We propose a low-complexity blind adaptive receiver that is based on a novel modified despreader and the constant modulus (CM) array. This system is capable of ing directional interference and capturing the GPS signal of interest without requiring explicit angle-of-arrival (AOA) information. We also consider the multiple satellite problem and extend the proposed receiver to capture several GPS signals of interest. Representative computer simulation examples are presented to illustrate the performance of the multicomponent system for the suppression of different jammer types.     

Antenna array beam steering using time-varying weights

The author presents a new technique of steering an array antenna by introducing time-varying phase weights. It is shown that the technique is equivalent to placing a linear phase and linear frequency offset across the array when transmitting a linear frequency modulated (LFM) waveform. The technique reduces array dispersion and increases the operating bandwidth. An element level signal generator is presented as a possible way of implementing the time-varying weights. A possible array implementation is also shown.<>     

An Adaptive Interference Canceling Array Utilizing Hybrid Techniques

The steady state properties of an adaptive array utilizing prior knowledge of both approximate signal arrival direction and signal characteristics are presented. The method combines the features of a directionally constrained array and an array with a self-generated reference signal. Explicit results are obtained for output signal, interference, and noise powers assuming a single interferer is present. The inclusion of a self-generated reference circuit is shown to reduce the sensitivity to pointing error typical of arrays utilizing a zero order directional constraint, the improvement being a consequence of the reduction of the desired signal component fed back to the sidelobe canceling circuit. A relationship between the degree of sensitivity reduction and the quality of the reference signal is developed. Results of computations of signal to interference plus noise ratios for a 7-element 10-wavelength nonuniformly spaced array as a function of pointing error are presented. These results show the behavior with one interferer inside and outside the beamwidth of the quiescent array and with multiple interferers for various degrees of perfection of the reference generating circuit. In all cases the computations confirm that the otherwise severe effects of small pointing errors are substantially reduced.     

Prediction of Adaptive Array Performance

A direct relationship between the conventional properties of an array and the array performance in an adaptive mode is given. Expressions are provided to obtain the output signal-to-interference-plus-noise ratio (SINR) of an adaptive array in terms of its conventinal pattern and the locations of the desired signal and jammers. These expressions permit one to evaluate the performance of an adaptive array without an exhaustive search for all possible scenarios and parametric values to ascertain that the required performance levels be met. In fact, one can predict the jammer locations for which the array will provide its best and worst performance by observing the conventional pattern. Several examples are provided to demonstrate the relationship between the conventional pattern and the adaptive array performance. The examples include both linear and planar arrays.     

An Adaptive Antenna for Rejection of Wideband Interference

A modification to the adaptive array under the directional constraint [1] is proposed to improve its performance of rejecting wideband interference. By analogy to the pattern synthesis of an antenna array which produces a flat null in its radiation pattern, an additional quantity that corresponds to the derivative of the pattern is generated and combined with the standard feedback quantity to control the weights of the array. This composite system is tested by computer simulation experiments and the following points are demonstrated in contrast to the conventional, simple system: 1) faster adaptation against wideband interference, 2) remarkable improvement of the signal-to-noise ratio of the output, i. e., very small fluctuation.     

An LMS Adaptive Array for Multipath Fading Reduction

Multipath fading often poses a serious hindrance in radiocommunication. The application of a least-mean-square (LMS)adaptive array to the problem of multipath fading reduction is discussed. However, it is known that multipath components are in general correlated with one another. We examine the effect of the correlation on the performance of the LMS adaptive array. When the correlation coefficient does not equal or approximate 1, the LMS adaptive array suppresses the multipath signals significantly by nulling. On the other hand, when the correlation coefficient nearly equals 1, the LMS adaptive array prevents the output signalpower from decreasing. Therefore, the LMS adaptive array mayreduce the multipath fading effectively for any correlation coefficient value. A reference signal in the LMS adaptive array is also discussed. It is shown that synchronization in the referencesignal generation must be extremely accurate. Moreover, aprocessor configuration is proposed which may generate thereference signal with the required accuracy.     

Equivalent transformation for a partially adaptive array

A partially adaptive array is one in which elements of a phased array are controlled or adaptively weighted in groups or in which certain elements, called auxiliary elements, are made controllable. Mathematically, this type of array is formed by transforming all of the elements of an array by a nonsquare matrix such that the resulting output vector has a length less than the number of array elements. It is shown that there is an equivalent matrix transform that can effectively be utilized in analyzing the partially adaptive array's performance when a small number of external jammers are present. Processor implementation and convergence rate considerations lead to the desirability of reducing the dimensionality of the cancellation processor while maintaining good sidelobe interference protection. A meaningful measure of canceller performance is to compute the optimal output signal-to-noise ratio. This expression is a function of the jammer, direction-of-arrival vectors (DOAVs), jammer powers, the array steering vector, and internal noise. It is shown that if this expression is computed for the fully adaptive array then it is easily computed for the partially adaptive array by transforming the jammer DOAVs and the steering vector by the orthogonal projection matrix defined by the rows of the subarray transformation matrix and substituting these vectors back into the original expression for the fully adaptive array