Development status of the high-speed reentry system-DASH

Despite huge amount of data collected by the previous interplanetary spacecraft and probes, the origin and evolution of the solar system still remains unveiled due to limited information they brought back. Thus, the Institute of Space and Astronautical Science (ISAS) of Japan has been given a commitment to pave the way to an asteroid sample return mission: the MUSES-C project. A key to success is considered the reentry with hyperbolic velocity, which has not ever been demonstrated as yet. With this as background, a demonstrator of atmospheric reentry system, DASH, has been designed to demonstrate the high-speed reentry technology as a GTO piggyback mission. The capsule, identical to that of the sample return mission, can experience the targeted level of thermal environment even from the GTO by tracing a specially designed reentry trajectory. After the purpose of the mission was outlined at the last IAF symposium, the final fitting tests have been conducted in the ISAS Sagamihara Campus involving the flight model hardware. Furthermore, a series of rehearsals for recovery have been already executed. The paper describes the current mission status of the project.     

Attitude control schemes for the first recovery mission of India

This paper describes the attitude control schemes for the various phases such as acquisition, on-orbit, orbit maneuver, de-boost maneuvers and coast phases of the India's first recovery mission Space Capsule Recovery Experiment-I (SRE-1). During the on-orbit phase, the SRE was configured to point the negative roll axis to Sun. The attitude referencing of SRE-1 was based on dry tuned gyros with updates from the attitude determined using on-board Sun sensors and magnetometer. For attitude acquisition, attitude maneuvers and for providing the velocity corrections for de-orbiting operations; a set of eight thrusters grouped in functionally redundant blocks were used. The control scheme with thrusters was based on proportional derivative controller with a modulator. In order to ensure micro-gravity environment during the on-orbit payload operations a linear quadratic regulator (LQR) based control scheme was designed to drive an orthogonal configuration of magnetic torquers which in turn produced three-axis control torque with the interaction of Earth's magnetic field. Proportional derivative control scheme with modulator was designed to track the steering commands during the velocity reduction as well as during the coasting phase of the de-orbiting operations. A novel thruster failure detection, isolation and reconfiguration scheme implemented on-board for the de-orbiting phase is also discussed in this paper.     

再入参数调整对登月航天器返回再入特性的影响

首先分析了再入参数调整对登月航天器返回再入运动特性的影响;然后利用自主编制的仿真软件,对再入参数调整的影响进行了仿真分析;最后在深入分析仿真结果的基础上,研究了再入参数变化对航天器再入过载、航程、飞行时间及落点散布等的具体影响规律,为后继进一步开展载人月球飞行相关任务的分析设计提供了有益参考。     

Lessons learned from the Space Flyer Unit (SFU) mission

The Space Flyer Unit (SFU) system and mission chronology are briefly introduced. Lessons learned from the SFU mission are categorized as programmatic and engineering lessons. In the programmatic category are dealt with both international and domestic collaborations. As for the engineering lessons safety design, orbital operation, in-flight anomaly, and post flight analyses are the major topics reviewed.     

Space-based societal applications—Relevance in developing countries

Space technology has the vast potential for addressing a variety of societal problems of the developing countries, particularly in the areas of communication, education and health sectors, land and water resources management, disaster management and weather forecasting. Both remote sensing and communication technologies can be used to achieve this goal.With its primary emphasis on application of space technology, on an end-to-end basis, towards national development, the Indian Space Programme has distinguished itself as one of the most cost-effective and development-oriented space programmes in the world.Developing nations are faced with the enormous task of carrying development-oriented education to the masses at the lower strata of their societies. One important feature of these populations is their large number and the spread over vast and remote areas of these nations, making the reaching out to them a difficult task. Satellite communication (Satcom) technology offers the unique capability of simultaneously reaching out to very large numbers, spread over vast areas, including the remote corners of the country. It is a strong tool to support development education. India has been amongst the first few nations to explore and put to use the Satcom technology for education and development-oriented services to the rural masses.Most of the developing countries have inadequate infrastructure to provide proper medical care to the rural population. Availability of specialist doctors in rural areas is a major bottleneck. Use of Satcom and information technology to connect rural clinics to urban hospitals through telemedicine systems is one of the solutions; and India has embarked upon an effective satellite-based telemedicine programme.Space technology is also useful in disaster warning and management related applications. Use of satellite systems and beacons for locating the distressed units on land, sea or air is well known to us. Indian Space Research Organisation (ISRO) is already a part of the International initiative called Satellite Aided Search and Rescue System.The programme to set up satellite-based Village Resource Centres (VRCs) across India, for providing a variety of services relevant to the rural communities, is also a unique societal application of space technology. The VRCs are envisaged as single window delivery mechanism for a variety of space-based products and services, such as tele-education; telemedicine; information on natural resources for planning and development at local level; interactive advisories on agriculture, fisheries, land and water resources management, livestock management, etc.; interactive vocational training towards alternative livelihood; e-governance; weather information; etc.This paper describes the various possibilities and potentials of Satcom and Remote Sensing technologies for societal applications. The initiatives taken by Indian Space Research Organisation in this direction are highlighted.     

交会对接绕飞段双冲量控制方法研究

在设计交会对接绕飞段的制导方案时,除考虑燃耗因素外,轨迹安全性设计指标也应予以满足。本文基于C-W方程的经典双冲量控制策略应用于绕飞段,在以往固定时间的双冲量控制研究的基础上,分别以燃耗、轨迹被动安全性、任务恢复执行能力和初始状态偏差作为独立约束条件,利用MATLAB计算机寻优,得到逐个独立约束下的控制时间的范围,同时采取逐层缩小的方式,最终获得了满足绕飞段轨迹安全性的设计要求以及满足多种约束条件的一种可以作为绕飞段优选的控制策略的双冲量控制方法。     

Using computer graphics to enhance astronaut and systems safety.

Computer graphics is being employed at the NASA Johnson Space Center as a tool to perform rapid, efficient and economical analyses for man-machine integration, flight operations development and systems engineering. The Operator Station Design System (OSDS), a computer-based facility featuring a highly flexible and versatile interactive software package, PLAID, is described. This unique evaluation tool, with its expanding data base of Space Shuttle elements, various payloads, experiments, crew equipment and man models, supports a multitude of technical evaluations, including spacecraft and workstation layout, definition of astronaut visual access, flight techniques development, cargo integration and crew training. As OSDS is being applied to the Space Shuttle, Orbiter payloads (including the European Space Agency's Spacelab) and future space vehicles and stations, astronaut and systems safety are being enhanced. Typical OSDS examples are presented. By performing physical and operational evaluations during early conceptual phases. supporting systems verification for flight readiness, and applying its capabilities to real-time mission support, the OSDS provides the wherewithal to satisfy a growing need of the current and future space programs for efficient, economical analyses.     

The development of the hardware for studying biological clock systems under microgravity conditions,using scorpions as animal models

The study of internal clock systems of scorpions in weightless conditions is the goal of the SCORPI experiment. SCORPI was selected for flight on the International Space Station (ISS) and will be mounted in the European facility BIOLAB, the European Space Agency (ESA) laboratory designed to support biological experiments on micro-organisms, cells, tissue, cultures, small plants and small invertebrates. This paper outlines the main features of a breadboard designed and developed in order to allow the analysis of critical aspects of the experiment. It is a complete tool to simulate the experiment mission on ground and it can be customised, adapted and tuned to the scientific requirements. The paper introduces the SCORPI-T experiment which represents an important precursor for the success of the SCORPI on BIOLAB. The capabilities of the hardware developed show its potential use for future similar experiments in space.     

Orbital manoeuvres of free flying platforms for retrieval by space shuttle

In a typical future mission a free flying platform will be released to space by Space Shuttle. After performing its active mission, it will have to wait for a suitable later Shuttle flight for retrieval at its original orbital altitude. To allow for the orbital descent during the total mission time of typically several months, one or several orbit raise manoeuvres have to be performed with the platform's own propulsion system. In the paper, the velocity-requirements Δv for these orbital transfers, depending on Sun activity, rendezvous-altitude, ballistic coefficient and longest expected mission time are treated.The simplest manoeuvre, consisting of one initial ascent transfer and one descent transfer at the actual retrieval date, is shown to be not optimal. Up to 25% of Δv can be saved, if several orbit raising transfers in a certain sequence are applied. A straightforward analytical treatment is presented for the optimization, while a computer program with the CIRA-atmosphere model is used for actual mission planning.     

A new approach to optimum sizing and in-orbit utilization of spacecraft photovoltaic power systems

This paper presents a systems approach to optimization of the size and orbital life of photovoltaic systems via minimizing the nighttime energy demand while maximizing the daytime energy consumption. The Day-Night Management of Load (DANMOE) strategy calls for sizing the system to a pre-selected day/night average load power ratio and operating the spacecraft in orbit within the day and night capacity capability, rather than the conventional single orbital average power capability. Examples for the Space Station and the telecommunication satellites show that the reduction in their specific masses can be substantial using any of the photovoltaic system technologies. The DANMOE scheme may also be used effectively to extend the life of batteries on currently orbiting satellites, and hence prolong their lifetime. The paper also discusses other benefits at the spacecraft level and the method of implementing the DANMOE approach.     

Suborbital and low-thermospheric experiments using sounding rockets in Taiwan

The suborbital flight is a kind of flight, which reaches the space and then comes back to ground without completing one orbital revolution. The atmospheric thermosphere extends from 85 km to 600 km in altitude. Therefore, the suborbital and low-thermospheric experiments to be performed at altitude below 300 km can be combined using the sounding rocket. These experiments include rocket staging, fairing separation, ultrasonic flight, reentry, aerobrake and recovery test, ultraviolet and ionization observations, ozone measurement, etc. The advent of Taiwan's sub-orbital and thermospheric experiments project can be traced back to 1997. This is the year Taiwan's National Space Organization (NSPO) was assigned to be responsible for procuring the sounding rocket for applications in science experiments and space technology research effort. From 1997 to 2010, 8 launches have been completed including one experimental hybrid rocket. All onboard instruments and sensors for sub-orbital and low-thermospheric experiments are developed and integrated by the domestic universities. More launches have been planned in the future. Opportunities for international cooperation in developing new instruments and payloads for future experiments will be possible.     

月球取样返回器分离阻力分析与地面分离试验验证

探月工程三期研制的月球取样返回器与轨道器间采用导向装配方式,装配后存在一定预应力,同时在轨两器分离时受空间环境作用而出现热变形,引起的分离阻力会对两器的正常分离产生影响。文章对返回器与轨道器的分离阻力进行分析和测量,并开展相关地面分离验证试验,结果表明,在轨环境引起的分离阻力约为366 N,地面装配应力引起的分离阻力约为160 N,两器分离速度约为0.24 m/s。研究结果可为轨返两器的分离设计提供参考。     

Meditations on the new space vision: the Moon as a stepping stone to Mars

The Vision for Space Exploration invokes activities on the Moon in preparation for exploration of Mars and also directs International Space Station (ISS) research toward the same goal. Lunar missions will emphasize development of capability and concomitant reduction of risk for future exploration of Mars. Earlier papers identified three critical issues related to the so-called NASA Mars Design Reference Mission (MDRM) to be addressed in the lunar context: (a) safety, health, and performance of the human crew; (b) various modalities of mission operations ranging surface activities to logistics, planning, and navigation; and (c) reliability and maintainability of systems in the planetary environment. In simple terms, lunar expeditions build a résumé that demonstrates the ability to design, construct, and operate an enterprise such as the MDRM with an expectation of mission success. We can evolve from Apollo-like missions to ones that resemble the complexity and duration of the MDRM. Investment in lunar resource utilization technologies falls naturally into the Vision. NASA must construct an exit strategy from the Moon in the third decade. With a mandate for continuing exploration, it cannot assume responsibility for long-term operation of lunar assets. Therefore, NASA must enter into a partnership with some other entity--governmental, international, or commercial--that can responsibly carry on lunar development past the exploration phase.     

Radiation: risk and protection in manned space flight.

Space radiation is the primary source of hazard for orbital and interplanetary space flight. Radiation levels for different space mission durations, have been established in order to determine the level of hazard. The risk of exceeding the established levels should not be more than 1%. Radiation environment models have been developed to estimate these values. It is possible to build spacecraft shielding based on the calculation of doses and the risk of exceeding these. By reviewing various calculated estimates of the risk, the radiation hazard and the efficiency of protective measures can be established for specific flights.     

Numerical Simulation of Unsteady Flow of Reentry Capsule

As a main tool for the lunar exploration and Mars landing project, the reentry capsule is responsible for the transportation of personnel and supplies, and it is very important to ensure its safety. The complex flow field caused by the shape of the large blunt cone makes it unstable in transonic and supersonic flight, so its dynamic characteristics need to be analyzed. This paper analyzes the dynamic characteristics of the reentry capsule by computational fluid dynamics(CFD) numerical simulation. The pitching combined dynamic derivative was obtained by simulation of forced pitching oscillation of the flight vehicle using the rigid dynamic grid; the time difference derivative was obtained by simulation of plunging of the flight vehicle using the rigid dynamic grid, too. The direct dynamic derivative was gained by negating the plunging derivative from sum. This paper simulates the pitching and plunging motion of NACA0012 air foil and hypersonic ballistic shape(HBS). The results of the simulation are consistent with the references. The Mars exploration rover entry capsule was simulated and analyzed to ensure a basis for the aerodynamic design and control of the reentry capsule.     

System test results from the GNC experiments on the PRISMA in-orbit test bed

The PRISMA in-orbit test bed will demonstrate guidance, navigation, and control strategies for spacecraft formation flying and rendezvous. The project is funded by the Swedish National Space Board and the prime contractor is the Swedish Space Corporation. The project is further supported by the German Aerospace Center, the Technical University of Denmark, and the French Space Agency. PRISMA was launched on June 15, 2010 and after three weeks of operations, all on-board systems and units have passed an initial commissioning phase. Separation of the two PRISMA satellites from each other is expected by mid-August 2010.PRISMA consists of two spacecraft: MAIN and TARGET. The MAIN spacecraft has full orbit control capability while TARGET is attitude controlled only.The Swedish Space Corporation is responsible for three groups of guidance, navigation, and control experiments. These experiments include GPS- and vision-based formation flying during which the spacecraft will fly in passive as well as forced motion. The three experiments are: autonomous formation flying, proximity operations with final approach/recede maneuvers, and autonomous rendezvous. This paper presents system test results from two of these experiments as obtained with the flight-ready system. The system tests consist of a series of simulations performed on the flight model spacecraft with a large amount of hardware in the loop.     

FY—1C卫星空间粒子成分监测器及其探测结果

简要介绍了FY－1C星空间粒子成分监测器的任务目标、工作原理、创新特色及在轨探测结果。空间粒子成分监测器用于卫星轨道空间的带电粒子辐射监测，为卫星的在轨安全和抗辐射加固设计服务。监测器在世界上实现用1套传感器完成对高能电子、质子、α粒子至铁离子的全成分监测，使我国首次获得了870km高太阳同步轨道全空间的各种重离子分布、质子能谱分布和电子通量分布，捕捉到大量的地磁暴和太阳质子事件，获得了批重要的探测成果。     

NASA and the phenomenology of discovery: Vigilance,work conditions,and a renewed space policy

As NASA works to redefine the meaning of its mission, two social scientists apply tools from phenomenology to explore how an agency, on the cusp of new thought, is tasked with discovery. Sources for the analysis include interviews, observations, case files and documents before and after a site visit to Johnson Space Center in Houston, Texas. Findings suggest that NASA should consider creating an internal office of phenomenological inquiry designed to recognize phenomenology at work as a fundamental approach for discovery. A special note of appreciation is extended to NASA for fostering and encouraging access to their organization to observe operations at the side of astronauts in training, engineers and scientists at work, and managers overseeing a Space Shuttle mission.     

轨道轰炸飞行器过渡段轨道设计与制导

针对轨道轰炸飞行器(OBV)的过渡段轨道设计与制导技术进行了讨论.在初始点位置、再入点位置和再入角固定的前提下,根据冲量假设和二体理论设计了固定时间转移轨道,其实质在于制动点位置和制动速度的确定.为了消除设计偏差,提出了一种基于虚拟再入点补偿的有限推力制导方案,并简要分析了关机点参数的选取原则.对于耗尽关机的动力系统,通过运用能量管理技术实现了多余燃料的耗散.仿真结果验证了上述方法的有效性.