机动目标的模型与跟踪算法

 <正> 在机动目标的“当前”统计模型中,目标的加速度被描述为修正的瑞利—马尔科夫过程,对应的自适应跟踪算法呈现出较好的跟踪特性。文献[2]研究了该模型及其自适应算法在实际的机载雷达跟踪系统的应用;文献[3]进一步推广了基于“当前”模型的MPDAF算法。本文提出一个新的机动目标模型,即假定目标加速度为一高斯—马尔     

基于STF的Jerk模型自适应机动目标跟踪算法

在Jerk模型的基础上,提出了一种新的机动目标自适应跟踪算法STF-Jerk。该算法通过引入强跟踪滤波器(STF)的渐消因子,实时调节滤波器增益,增强了系统对突发机动的自适应跟踪能力,从而很好地改善了Jerk模型在跟踪机动目标时的跟踪精度。仿真结果表明,提出的STF-Jerk自适应跟踪算法显著提高了Jerk模型自适应算法的机动目标跟踪性能。     

基于视线角序列的机动目标视线角速率计算

 依据拦截弹与机动目标间的相对位置关系,采用导引头球面模型,基于当前统计模型,实现了强跟踪状态自适应滤波,计算出了可用于制导的视线角速率。该算法利用导引头球面模型,将测角信息转换成距离信息,进行方差自适应调整和卡尔曼滤波。在只给出视线角序列信息的情况下,根据相对状态滤波结果求出所需的视线角速率。     

自由段弹道目标跟踪算法在工程中的应用

在对弹道目标跟踪预警的工程实践中,雷达系统对目标运动的信息处理速度尤为重要,因而,文章选取自适应跟踪模型与卡尔曼滤波相结合的方法解决自由段弹道目标的跟踪问题,并与扩展卡尔曼跟踪算法做了对比分析。仿真显示,2种滤波方式分别与自适应跟踪模型相结合后,卡尔曼滤波和扩展卡尔曼滤波跟踪性能相差不大,但其算法简单、运算时间短,可以较好满足自由段弹道目标跟踪的工程需求。     

基于神经网络的机动目标信息融合与并行自适应跟踪

基于“当前”统计模型和 BP神经网络 ,提出一种新的机动目标神经网络信息融合与并行自适应跟踪算法 ( NIFPAT)。该算法采用双滤波器并行结构 ,利用全状态反馈 ,通过 BP网络调整系统方差以适应目标的运动变化 ,具有对目标各种运动状态的良好自适应跟踪能力     

引入神经网络的交互式多模型算法

在交互式多模型算法中引入神经网络算法以改进目标跟踪的精度。利用神经网络算法对基于机动目标“当前”统计模型的均值和方差自适应滤波算法进行修改,提高该算法的性能,然后采用交互作用多模型算法跟踪机动目标,提高了机动目标的跟踪精度。     

车载组合导航中的自适应滤波技术研究

针对现有的自适应卡尔曼滤波算法结构繁杂,采用了一种自适应卡尔曼滤波的车载SINS/GPS 组合导航算法,并与常规卡尔曼滤波算法作了比较。仿真结果表明,这种算法具有结构简单、实时性好和抗野值等的优点,不失为一种实用而有效的滤波方法。     

基于自适应扩展卡尔曼滤波的载波跟踪算法

精确的载波相位测量是精密测距中一个很重要的研究点。针对传统扩展卡尔曼滤波(EKF)的固定设计在先验信息不充分和动态变化环境中存在的不足,提出了一种基于自适应扩展卡尔曼滤波(AEKF)的载波跟踪算法。该算法通过实时监测滤波器新息或残差的动态变化,以修正状态噪声方差和观测噪声方差,进而调整滤波器增益,控制状态预测值和观测值在滤波结果中的权重。理论分析和仿真结果表明,本算法充分利用了观测信号的统计特性,克服了传统扩展卡尔曼滤波算法的不足,能够获得更好的载波跟踪性能。     

相控阵主动雷达导引头波形策略

针对高脉冲重复频率脉冲多普勒(HPRF-PD)体制的相控阵主动雷达导引头中存在的距离遮挡问题,设计了一种新的波形选择策略。首先,利用提出的脉冲重复频率(PRF)波形选择策略,离线计算得到距离对应PRF的波形查找表。然后,通过叉积自动频率控制环路滤波(CPAFCLF)算法预估下个相参处理间隔(CPI)导引头与目标间的径向相对速度,并联合提出的基于Sage-Husa带有速度预测的自适应"当前"统计模型(SH-ACSMVP)算法得到的距离跟踪值,获得下个CPI的距离预测值。在跟踪机动目标场景中,相比于"当前"统计(CS)模型跟踪算法及基于"当前"统计模型的自适应无迹卡尔曼滤波(CAUKF)算法,本文算法得到的距离预测误差更小,误差收敛速度更快。根据此距离预测值从波形查找表中选择波形发射,作为下个CPI的发射波形,实现后续跟踪阶段的抗距离遮挡,提高目标跟踪性能。仿真结果表明了本文所设计波形选择策略的正确性及有效性。     

基于 SURF算法和 Kalman预测的运动目标跟踪

SURF(Speeded Up Robust Feature)特征提取方法是SIFT(Scale Invariant Feature Transform)算法的改进,具有速度快和精度高等特点,但其对于较大尺寸图像的匹配速度仍然有待提高。文章提出了一种将基于SURF特征匹配算法与卡尔曼滤波相融合的目标跟踪算法,该算法用特征点的中心近似目标最佳位置;通过卡尔曼滤波预测出当前的目标位置,建立自适应匹配窗口;最后,应用SURF算法提取窗口内的特征向量进行匹配。实验表明,该算法在目标发生大尺度旋转和缩放、部分遮挡时能够稳定跟踪,其跟踪速度比SURF算法有很大的提高。     

Study on Friction Torque Loading with an Electro-hydraulic Load Simulator

This article, in order to precisely impose friction on aircraft and weapon actuation systems, presents a new friction loading method characteristic of “torque-zero velocity” switching control with an electro-hydraulic load simulator. As the general Stribeck friction model has little related to static friction, it proposes a “torque-zero velocity” switcher, in which a zero-velocity controller is developed to load the static friction and a torque controller the kinetic friction. With the help of mathematical modeling, this article designs a “torque-zero velocity” switching controller and, correspondingly, provides a “dual-threshold judgment” algorithm. Simulation results indicate that the proposed method can be successfully used to carry out the static and kinetic friction simulation with an electro-hydraulic load simulator.     

Progress and future prospects of CFD in aerospace—Wind tunnel and beyond

A historical perspective of computational fluid dynamics (CFD) in aerospace in the last 30 years is firstly given. It is shown that there still remain a number of problems that are geometrically simple but difficult to simulate even after many simulations were conducted over complex body configurations. The fact indicates that CFD research is now in the “specific phase” and requires some innovation.The innovation includes “evolutionary effort” and “revolutionary effort”. As an example of evolutionary effort, large eddy simulations/ Reynolds-averaged Navier–Stokes simulations (LES/RANS) hybrid method and its application examples are presented. A shift from RANS to LES/RANS hybrid method occurs not because of the advancement of computers but because of our recognition that separated flows are inherently unsteady and successful simulations require LES-like computations.Comment is given that there may be other types of research necessary to make CFD a real useful tool for a design in addition to simply showing CFD capability for complex body configurations. As one of the examples, construction of a CFD database is presented. Another issue is to make CFD infrastructures so that people outside CFD community may use CFD as a tool to formulate or refine their ideas.To find out revolutionary effort, the message given by Prof. Dean Chapman in 1977 is referred. Observation of current CFD research reveals that evaluation methods of “scale effect” that were believed to be the most important benefit of CFD have not yet been established. Such establishment is the key for the revolution of CFD and researchers need to focus their effort on the development of technologies to evaluate scale effect. Only with such new CFD technologies can “conceptual design with CFD” become feasible.     

一种实时飞行轨迹重构方法

提出一种有效的实时纵向飞行轨迹重构的新方法。为了得到状态估计的快速算法,本文把非线性飞行轨迹重构转化为线性、离散、时变状态和参数估计问题。将数值稳定性好、计算量也小的序列U-D分解滤波算法用于状态方程为线性、观测方程为线性或非线性的滤波问题中。由于测量值中常常含有系统偏差,本文把这些偏差作为增广状态加入增广状态模型中,并利用模型的一些特点,提出偏差分离的U-D分解算法,使计算量大大减少。仿真和实际试飞数据计算表明、本文的方法可得到比平方根协方差滤波更有效的实时飞行轨迹重构结果。     

基于B样条模型的参数化卡尔曼滤波器设计

以标准B样条函数为基础,建立了以位置、样条系数为状态变量的参数化卡尔曼滤波器,用于解决外测数据的实时滤波问题。按照时间更新跨节点与否,分2种情况给出了状态转移方程。在时间更新跨样条节点时,使用样条函数的一阶连续导数条件,估计新增样条节点系数,由此实现滤波器在跨节点处的平滑过渡。通过仿真数据对新方法进行验证,并与已有的2类典型滤波方法进行比较,结果表明,本方法的滤波精度与另一类直接基于弹道信号表示的样条递推滤波方法精度相当,且可表现出更优的收敛性。新方法具有样条参数化模型的相同优点,可对时域信号全时段建模,可利用先验信息设计弹道优选节点而实现滤波性能优化,缺点在于状态更新的策略较为复杂。     

Pulsar Wind Nebulae as Cosmic Pevatrons: A Current Sheet’s Tale

I outline, from a theoretical and somewhat personal perspective, significant features of Pulsar Wind Nebulae (PWNe) as Cosmic Accelerators. I pay special attention to the recently discovered gamma ray “flares” in the Crab Nebula’s emission, focusing on the possibility, raised by the observations, that the accelerating electric field exceeds the magnetic field, suggesting that reconnection in the persistent current layer (a “current sheet”) plays a significant role in the behavior of this well studied Pevatron. I address the present status of the termination shock model for the particle accelerator that converts the wind flow energy to the observed non-thermal particle spectra, concluding that it has a number of major difficulties related to the transverse magnetic geometry of the shock wave. I discuss recent work on the inferred pair outflow rates, which are in excess of those predicted by existing theories of pair creation, and use those results to point out that the consequent mass loading of the wind reduces the wind’s bulk flow 4-velocity to the point that dissipation of the magnetic field in a pulsar’s wind upstream of the termination shock is restored to life as a viable model for the solution of the “σ” problem. I discuss some suggestions that current starvation in the current flow supporting the structured (“striped”) upstream magnetic field perhaps induces a transition to superluminal wave propagation. I?show that current starvation probably does not occur, because those currents are carried in the current sheet separating the stripes rather than in the stripes themselves.     

Modeling novel methodologies for unmanned aerial systems–Applications to the UAS-S4 Ehecatl and the UAS-S45 Bálaam

The rising demand for Unmanned Aerial Systems(UASs) to perform tasks in hostile environments has emphasized the need for their simulation models for the preliminary evaluations of their missions. The efficiency of the UAS model is directly related to its capacity to estimate its flight dynamics with minimum computational resources. The literature describes several techniques to estimate accurate aircraft flight dynamics. Most of them are based on system identification. This paper presents an alternative methodology to obtain complete model of the S4 and S45 unmanned aerial systems. The UAS-S4 and the UAS-S45 models were divided into four sub-models, each corresponding to a specific discipline: aerodynamics, propulsion, mass and inertia, and actuator. The‘‘aerodynamic" sub-model was built using the Fderivatives in-house code, which is an improvement of the classical DATCOM procedure. The ‘‘propulsion" sub-model was obtained by coupling a two-stroke engine model based on the ideal Otto cycle and a Blade Element Theory(BET) analysis of the propeller. The ‘‘mass and the inertia" sub-model was designed utilizing the Raymer and DATCOM methodologies. A sub-model of an actuator using servomotor characteristics was employed to complete the model. The total model was then checked by validation of each submodel with numerical and experimental data. The results indicate that the obtained model was accurate and could be used to design a flight simulator.     

压气机二次流及其控制

本文是压气机二次流研究的总结。文中概述了压气机端壁角区流动,二次流与叶片颤振,二次流控制等问题的研究结果,这对于了解压气机真实流动和建立新的物理模型提供了一些重要信息,对于工程应用亦有一定价值。      

数据库的工程界面

 系统地论述了数据库的工程界面、数据库管理系统、程序设计语言三者之间的层次关系。以ＳＴＥＰ标准的ＳＤＡＩ（ＳｔａｎｄａｒｄＤａｔａＡｃｃｅｓｓｌｎｔｅｒｆａｅｅ）作为数据库工程界面的具体例子,详细地论述了它向ＯＤＢＭＳ及ＲＤＢＭＳ的映射。对于向ＲＤＢＭＳ的映射,提出了“知子女联系”向“知子女联系”的映射策略,为简化映射算法、提高系统效率提供了一种选择。