The Effect of Staggered PRF's on MTI Signal Detection

Long-range surveillance radars use MTI techniques to detect moving targets in a clutter background. The transmitter PRF is usually staggered to eliminate the blind speeds due to aliasing of the target and clutter spectra. A spectral analysis of the target and clutter signals is performed for the case of nonuniform sampling, and it is shown that the clutter spectral density continues to fold over at the basic PRF, but the signal spectrum becomes dispersed in frequency, which means that an MTI rader will never be completely blind to moving targets.     

Clutter Covariance Matrix Form Effect on Adaptive MTI Performance

The performance of an adaptive moving target indicator (MTI), which employs a Wiener predictor by means of a transversal filter, is discussed, taking into consideration the effect of the form of the clutter covariance matrix on the MTI performance. It is emphasized that the main tap position in the transversal filter is an important factor which provides degrees of freedom in the clutter covariance matrix to improve the MTI performance. Calculation results show that by exploiting these degrees of freedom, excellent performance is feasible, in particular shorter transient response.     

Properties of Staggered PRF Radar Spectral Components

Expressions for moving target indicator (MTI) improvement factor limitation due to pulse repetition frequency (PRF) staggering and loss of target detectability for various values of Doppler frequency in the passband are presented. It is also shown that the product of variance of stagger periods and clutter variance is an important parameter determining the performance of a staggered PRF MTI radar.     

Airborne adaptive MTI scheme with preventing the whitening of thetarget

A new airborne MTI scheme that applies to non-homogeneous clutter environment is presented. Results of simulation have proved that the scheme has a superior ground clutter suppression performance and can effectively prevent the whitening of a target     

MTI Optimization in a Multiple-Clutter Environment

A means of optimizing a moving target indicator (MTI) filter for rejecting several types of clutter, which are generated by different mechanisms such as by rain or the ground, is formulated. lt is found that the optimal performance of such a filter depends on the spectral density functions, average radar cross sections, and the relative mean Doppler frequencies of each type of clutter. lt is shown that the optimal improvement factor of such a filter is bounded by the weighted average (weighted in accordance with the radar cross sections of the clutter types) of the improvement factor for the individual clutter type. lt is also shown that the improvement factor of such a filter is a function of the relative mean Doppler frequency f0 between the clutter types. As f0 increases, the performance of the MTI system degrades. The worst improvement factor occurs when f0 is equal to half of the radar pulse-repetition frequency (PRF).     

A Comparison of Noncoherent and Coherent MTI Improvement Factors

An analysis based on statistical considerations and Monte Carlo simulations indicates that a noncoherent moving target indicator (MTI) using a linear envelope detector differs from one using a square law envelope detector. The square law envelope detector is usually described in the literature because of ease of analysis, and it is commonly stated or implied that the results are the same for the two cases because of the similar spectral characteristics of the detectors. A comparison is made between the two noncoherent MTIs and the coherent MTI in terms of clutter attenuation and MTI improvement factors.     

An Adaptive MTI for Weather Clutter Suppression

A digital realization of an adaptive clutter-locking loop is presented. The purpose of the loop is to estimate the mean Doppler frequency of the clutter. The clutter spectrum is then shifted toward the zero Doppler by this estimate. A fixed moving target indicator (MTI) canceler following the loop suppresses the shifted clutter. Experimental simulations illustrate the feasibility of the loop. Results indicate that the proposed canceler works significantly better than a fixed canceler, while not as well as the 10-pulse moving target detector (MTD) processor. However, the complexity of the MTD is significantly more than the relatively simple adaptive processor presented here.     

MTI Processing and Weibull-Distributed Ground Clutter

It is shown that the Weibull-distributed ground clutter obeys a Weibull distribution after processing by the double canceler moving target indicator (MTI).     

Design and Evaluation of an Adaptive MTI Filter

The design and evaluation of an adaptive moving target indicator (MTI) filter, the adaptive canceler for extended clutter (ACEC) is dealt with, taking into consideration adaptivity to clutter mean Doppler frequency. This consideration is one of the most important operational requirements in adaptive MTI's and permits a relatively simple hardware implementation as compared to more general optimization and adaptivity criteria (briefly described). The ACEC's algorithm compensates in real time for the clutter mean Doppler frequency. Performances have been obtained by digital computer simulation in various operational conditions.     

On the Optimization of MTI Clutter Rejection

In this paper is formulated the problem of optimization of the improvement factor of a nonrecursive MTI by minimization of a quadratic form. The minimum normalized clutter output (a reciprocal of the average improvement factor) is the minimum eigenvalue of this quadratic form, and the corresponding eigenvector is the optimal weight to be used in this filter. By use of classic matrix theory, some properties of this MTI improvement factor are shown, namely, that it is bounded and is a monotonic function of the clutter spectrum variance. Also discussed is the limit of an MTI system having a large number of cancellers. Finally, the problem of a staggered-PRF MTI filter is examined, for which it is shown that its improvement factor is bounded by two equivalent constant-PRF MTI systems. One of these systems has a PRF equal to the lowest PRF of the staggered-PRF system, while the other has a PRF equal to the highest PRF of the staggered system.     

Clutter suppression using recursive and nonrecursive MTI filters

The author calculates the effectiveness of clutter suppression of a moving-target-indicator (MTI) filter in tandem with a fast-Fourier-transform (FFT) Doppler filter bank, taking into account the transient response of the MTI filter. Both recursive and nonrecursive filters are considered. The analysis is extended to the high-pulse-repetition-frequency (PRF) case with clutter fold over. The results can be used to select key design parameters, including the MTI filter, the window size, and the initial transient segment to be discarded. Numerical examples are included     

Low cost Doppler ratio detection radar with interclutter visibility

A low cost concept, called Doppler ratio detection (DRD), for suppressing the clutter residue of Doppler radars is described. The concept provides a simple way to establish a target detect-clutter reject threshold at each range cell, whether a MTI canceler only or a bank of Doppler filters is used. In its simplest form, the target detect/clutter reject threshold is based on the ratio of the magnitudes of Doppler-processed and non-Doppler processed signals. The experiment showed that clutter was rejected, but the amount of added degradation in detection sensitivity was not determined. This degradation will depend on a number of factors, including the number of pulses per beamwidth     

Design of MTI Radar on the Basis of Detection Probability

A single (quadrature) channel moving target indicator (MTI) radar system employing a tapped delay line filter is analyzed. The point of view taken is that of optimal clutter rejection in conjunction with subsequent receiver decision operations. The random nature of the spread of target Doppler shifts is taken into account. Based on the above, a procedure is presented by means of which the detection probability can be numerically evaluated for an optimized filter frequency response.     

On Increasing Usable MTI Filter Bandwidth by Removing Linear-Phase Constraint

It has been shown in the literature that the linear-phase constraint of finite-duration impulse-response (FIR) digital filters can, under certain circumstances, be effectively traded either for a better filter amplitude response or a reduction in the number of filter coeficients. It is shown that such a tradeoff can be exploited for moving target indicator (MTI) radar signal processors to increase the usable bandwidth for target detection. Although it is demonstrated that the increase is significant for narrowband (ground) clutter, it is negligible for wideband (weather) clutter.     

Measurements of L-band inland-water surface-clutter Doppler spectra

Although radar surface-clutter reflectivities from terrain are generally much greater than those from water, strong Bragg resonances at low but non-zero Doppler frequencies in backscatter from small inland bodies of water might potentially cause false alarms for moving target indicator (MTI) or other Doppler signal-processing techniques designed for target detection in ground clutter. To provide data for investigating this concern, measurements of L-band radar backscatter were recorded from the surface of a small inland freshwater reservoir in central Massachusetts. These measurements were of unusually high system stability and spectral purity so as to provide up to 80 dB of available spectral dynamic range. Strong Bragg spikes occurred in the clutter Doppler spectra from the reservoir at low (3 to 4 Hz) but non-zero Doppler frequencies. This strong Bragg resonance was persistent in time and space throughout the measurements. Spectral results are presented for all four combinations of linear polarization. Comparison with tree clutter spectral results indicates that, when an occasional water body comes under surveillance at vertical polarization in otherwise generally forested terrain, water clutter spectral density is expected to exceed surrounding-terrain tree clutter spectral densities in the Bragg-offset Doppler vicinity by large amounts     

Super resolution feature extraction of moving targets

High range resolution (HRR) moving target indicator (MTI) is becoming increasingly important for many military and civilian applications such as the detection and classification of moving targets in strong clutter background. We consider the problem of extracting the HRR features of moving targets with very closely spaced scatterers in the presence of strong stationary clutter, where the range migration and Doppler frequency are taken into account. A relaxation-based algorithm, which is robust and computationally simple, is proposed to deal with the above problem. Numerical results have shown that the proposed algorithm exhibits super resolution and excellent estimation performance     

A localized adaptive MTD processor

The problem of achieving the optimum moving target indicator (MTI) detection performance in strong clutter of unknown spectrum when the set of data available to the estimation of clutter statistics is small due to a severely nonhomogeneous environment is studied. A new adaptive implementation, called the Doppler domain localized generalized likelihood ratio processor (DDL-GLR), is proposed, and its detection performance is studied in detail. It is shown that the DDL-GLR is a data-efficient implementation of the high-order optimum detector and has several advantages of practical importance over the adaptive processors     

New Clutter Rejection Waveforms for Long-Range Radar

A frequent compromise in the design of long-range search radars has to be made between the maximum unambiguous detection range and the achievable coherent clutter rejection performance. A new class of waveforms is introduced which offers the designer a previously unavailable flexibility in arriving at radar designs with improved clutter rejection without seriously affecting the maximum unambiguous search range. The key to these new waveforms is the recognition that a class of useful N-pulse, nonrecursive, moving target indicator (MTI) canceler designs exists which only requires the radar to transmit a total of N -1 (nonuniformly spaced) pulses.     

Quantization Requirements in Digital MTI

To minimize hardware complexity, it is desirable to implement a digital moving target indicator (MTI) with the fewest number of quantization levels. The reduction of the clutter cancellation ability of single-and double-canceller MTI's is discussed with binominal weighting as a function of the number of levels and the spacing of the levels. The method of analysis is applicable to more complex MTI's as weil as nonuniform quantizers.