共查询到20条相似文献,搜索用时 62 毫秒
1.
为提高中继卫星系统的应用效能及数传任务的完成率,在中继卫星调度中考虑了断点续传这一应用模式,即对单个数传任务进行合理拆分,使其在多个时间窗口内完成。首先构建面向断点续传的中继卫星单址天线的调度模型,然后提出一种基于冲突风险评估的冲突度量化方法,并设计考虑断点续传的两阶段调度算法。最后开展大量的仿真实验将该算法与贪婪算法、基于最小冲突度的启发式算法和基于任务优先级的启发式算法这3个不考虑断点续传的算法进行对比。实验结果表明,所提出的算法在任务完成率方面分别提高了7.67%、6.34%和8.67%。 相似文献
2.
基于执行时段滑动调整策略的中继卫星任务规划算法设计 总被引:1,自引:0,他引:1
针对中继卫星任务规划问题开展研究,提出一种基于执行时段滑动调整策略的任务规划算法。首先分析了中继卫星资源调度过程,并对任务申请的时间特征进行形式化描述,然后归纳出任务分配的主要约束,从而完成问题建模。在此基础上,对优化算法进行设计,给出了执行时段滑动调整步骤。通过调整已规划任务执行时段的方法,使部分原本无法执行任务具备执行可能,提升了任务执行率和资源利用率。在仿真实验中,通过大规模测试分析对比不同算法的优化效果,验证了文中所提方法的有效性。 相似文献
3.
4.
侦察卫星实拍实传的综合优先度调度算法 总被引:1,自引:0,他引:1
研究侦察卫星实拍实传数传调度问题,是为了解决如何为实拍实传数传需求分配地面资源及数传时间的问题。首先对卫星实拍实传数传需求和任务进行了分析,建立了卫星实拍实传数传调度问题模型;根据问题特点及问题模型,提出了一种基于综合优先度的启发式调度算法;最后通过一个应用实例,并通过对本文算法与其他一些算法的运行比较,验证了本文所研究的模型及算法是可行的。 相似文献
5.
我国中继卫星系统在交会对接任务中的应用 总被引:1,自引:0,他引:1
我国中继卫星系统在交会对接任务中得到了成功应用,显著提升了测控通信覆盖率,充分体现了中继卫星系统在交会对接任务测控通信中发挥的重要作用.结合中继卫星系统特点,分析交会对接任务对中继卫星系统的任务需求;探讨了中继卫星捕获跟踪用户目标、对用户目标测定轨、着陆场直升机缝隙通信等关键技术;最后总结了中继卫星系统抗雨衰影响、多目标支持能力、应急支持能力等方面的经验做法,并提出了后续改进和完善的建议. 相似文献
6.
首先介绍成像观测卫星调度问题的特点和主要约束,将成像观测卫星调度分为调度预处理、调度模型及求解、调度结果评估3个阶段。在此基础上,论述成像观测卫星调度模型,并采用列生成法,将多卫星调度问题分解为集合分割主问题和单卫星调度子问题,通过循环迭代来求解调度模型。最后,针对本文提出的算法设计一个问题实例,并给出算法计算结果。结果分析表明,本文提出的模型和算法能较好解决实际应用问题。 相似文献
7.
8.
9.
首先简要介绍对地观测卫星的成像过程,详细分析多星调度过程中涉及的各种约束。在此基础上,将对地观测卫星调度问题看作一类具有时间窗口的并行机器调度问题,对其进行了数学描述,并建立对地观测卫星调度的混合整数规划模型。采用列生成法,将多卫星调度问题分解为集合分割主问题和单卫星调度子问题,通过循环迭代来求解调度模型。最后,针对本文提出的算法设计一个问题实例,并给出算法计算结果。结果分析表明,列生成法的效率与问题规模大小相关。 相似文献
10.
11.
有翼高超声速再入飞行器气动设计难点问题 总被引:3,自引:1,他引:2
有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。 相似文献
12.
LUO Cheng LIU Hua YANG Jia-ling LIU Kai-xin 《中国航空学报》2007,20(3):230-235
Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks. 相似文献
13.
基于飞机油箱模型形状特征油量测量切片步长选择方法研究 总被引:1,自引:0,他引:1
在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明:该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。 相似文献
14.
波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面:电子化(e-Enabled)运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境(GCE)。 相似文献
15.
The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow 总被引:1,自引:0,他引:1
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation. 相似文献
16.
17.
基于弯曲激波压缩系统的高超声速进气道反设计研究进展 总被引:3,自引:0,他引:3
总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。 相似文献
18.
临近空间飞行器测控与信息传输系统频段选择 总被引:7,自引:0,他引:7
临近空间飞行器是高性能信息化武器平台,测控(TT&;C)与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联(ITU)国际标准、高速数传、接收信噪比(SNR)、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。 相似文献
19.
Wu Xianyu Li Xiaoshan Ding Meng Liu Weidong Wang Zhenguo 《中国航空学报》2007,20(6):488-494
In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances. 相似文献
20.
Abnormal Shape Mould Winding 总被引:1,自引:0,他引:1
Fu Hongya Wang Xianfeng Han Zhenyu Fu Yunzhong 《中国航空学报》2007,20(6):552-558
为解决网格化芯模的缠绕问题,本文提出了复合材料面片缠绕机理;接着详细分析了面片缠绕过程中的芯模凹曲面上纤维滑线和架空现象,应用微分几何曲面理论和空间几何理论,提出判据及其解决方案;最后,针对飞机发动机进气道的缠绕成型,编制缠绕控制程序并进行相应的实验,验证了面片缠绕方法的可行性。 相似文献