Micromission spacecraft: a low-cost, high-capability platform for space science missions

The Ball Micromission Spacecraft (MSC) is a multi-purpose platform capable of supporting science missions at distances from the Sun ranging from 0.7 to 1.7 AU. In the baseline scenario, MSC is launched as a secondary payload on an Ariane 5 rocket from Kourou, French Guiana, to GTO using the Ariane 5 structure for auxiliary payloads (ASAP5). The maximum launch wet mass is 242 Kg and can include up to 45 Kg of payload depending on AV needs. The on-board propulsion system is used for maneuvering in the Earth-Moon system and injecting the spacecraft into its final orbit or trajectory. For Mars missions, MSC enables orbiting Mars for science payloads and/or communications and navigation assets, or for precision Mars fly-bys to drop up to six probes. The micromissions spacecraft bus can be used for science targets other than Mars, including the Moon, Earth, Venus, Earth-Sun Lagrange points, or other small bodies. This paper summarizes the current spacecraft concept and describes the multimission spacecraft bus implementation in more detail.     

THE CLUSTER DATA PROCESSING SYSTEM: A DISTRIBUTED SYSTEM IN SUPPORT OF A CHALLENGING SCIENTIFIC MISSION

The Cluster mission is aimed at the study of small-scale structures that are believed to be fundamental in determining the behaviour of key interactive processes of cosmic plasma. The mission will be controlled from the European Space Operations Centre (ESOC). ESOC is also in charge of the commanding of the scientific payloads on-board the four Cluster spacecraft after negotiation with the Cluster Principal Investigators (PIs) and of collecting and distributing the mission's scientific results to the Cluster community. This paper describes the process of translating the scientific requirements of the Cluster mission into a data-processing system supporting the mission via the definition of an appropriate operational scenario. In particular, the process of negotiation between the PIs and ESOC to command the spacecraft is mediated by the Joint Science Operations Centre (JSOC) and finalised by the Cluster Mission Planning System (CMPS) while the return of the data to the Cluster community is actuated by the Cluster Data Disposition System (CDDS). The Cluster Mission Control System (CMCS) provides the interface between these two systems and the spacecraft. These elements constitute the Cluster Data-Processing System (CDPS).     

Missions to Mercury

Mercury is a very difficult planet to observe from the Earth, and space missions that target Mercury are essential for a comprehensive understanding of the planet. At the same time, it is also difficult to orbit because it is deep inside the Sun’s gravitational well. Only one mission has visited Mercury; that was Mariner 10 in the 1970s. This paper provides a brief history of Mariner 10 and the numerous imaginative but unsuccessful mission proposals since the 1970s for another Mercury mission. In the late 1990s, two missions—MESSENGER and BepiColombo—received the go-ahead; MESSENGER is on its way to its first encounter with Mercury in January 2008. The history, scientific objectives, mission designs, and payloads of both these missions are described in detail.     

Venus: The Atmosphere,Climate, Surface,Interior and Near-Space Environment of an Earth-Like Planet

This is a review of current knowledge about Earth’s nearest planetary neighbour and near twin, Venus. Such knowledge has recently been extended by the European Venus Express and the Japanese Akatsuki spacecraft in orbit around the planet; these missions and their achievements are concisely described in the first part of the review, along with a summary of previous Venus observations. The scientific discussions which follow are divided into three main sections: on the surface and interior; the atmosphere and climate; and the thermosphere, exosphere and magnetosphere. These reports are intended to provide an overview for the general reader, and also an introduction to the more detailed topical surveys in the following articles in this issue, where full references to original material may be found.     

Radiation exposure predictions for short-duration stay Mars missions

The human radiation environment for several short-duration stay manned Mars missions is predicted using the Mission Radiation Calculation (MIRACAL) program, which was developed at NASA Langley Research Center. This program provides dose estimates for galactic cosmic rays (GCR) and large and ordinary solar proton flare events for various amounts of effective spacecraft shielding (both operational and storm shelter thicknesses) and a given time history of the spacecraft's heliocentric position. The results of this study show that most of the missions can survive the most recent large flares (if they were to occur at the missions' perihelion) if a 25 g/cm2 storm shelter is assumed. The dose predictions show that missions during solar minima (when solar flare activity is the lowest) are not necessarily the minimum dose cases, due to increased GCR contribution during this time period. The direct transfer mission studied has slightly lower doses than the outbound Venus swingby mission [on the order of 10-20 centi-Sieverts (cSv) lower], with the greatest dose differences for the assumed worst case scenario (when the large flares occur at perihelion). The GCR dose for a mission can be reduced by having the crew spend some fraction of its day nominally in the storm shelter (other than during flare events).     

ExoMars Trace Gas Orbiter (TGO) Science Ground Segment (SGS)

The ExoMars Trace Gas Orbiter (TGO) Science Ground Segment (SGS), comprised of payload Instrument Team, ESA and Russian operational centres, is responsible for planning the science operations of the TGO mission and for the generation and archiving of the scientific data products to levels meeting the scientific aims and criteria specified by the ESA Project Scientist as advised by the Science Working Team (SWT). The ExoMars SGS builds extensively upon tools and experience acquired through earlier ESA planetary missions like Mars and Venus Express, and Rosetta, but also is breaking ground in various respects toward the science operations of future missions like BepiColombo or JUICE. A productive interaction with the Russian partners in the mission facilitates broad and effective collaboration. This paper describes the global organisation and operation of the SGS, with reference to its principal systems, interfaces and operational processes.     

CLUSTER – SCIENCE AND MISSION OVERVIEW

The European Space Agency's Cluster programme is designed to study the small-scale spatial and temporal characteristics of the magnetospheric and near-Earth solar wind plasma. The programme is composed of four identical spacecraft which will be able to make physical measurements in three dimensions. The relative distance between the four spacecraft will be varied between 200 and 18000 km during the course of the mission. This paper provides a general overview of the scientific objectives, the configuration and the orbit of the four spacecraft and the relation of Cluster to other missions.     

Clouds and Hazes of Venus

More than three decades have passed since the publication of the last review of the Venus clouds and hazes. The paper published in 1983 in the Venus book summarized the discoveries and findings of the US Pioneer Venus and a series of Soviet Venera spacecraft (Esposito et al. in Venus, p. 484, 1983). Due to the emphasis on in-situ investigations from descent probes, those missions established the basic features of the Venus cloud system, its vertical structure, composition and microphysical properties. Since then, significant progress in understanding of the Venus clouds has been achieved due to exploitation of new observation techniques onboard Galileo and Messenger flyby spacecraft and Venus Express and Akatsuki orbiters. They included detailed investigation of the mesospheric hazes in solar and stellar occultation geometry applied in the broad spectral range from UV to thermal IR. Imaging spectroscopy in the near-IR transparency “windows” on the night side opened a new and very effective way of sounding the deep atmosphere. This technique together with near-simultaneous UV imaging enabled comprehensive study of the cloud morphology from the cloud top to its deep layers. Venus Express operated from April 2006 until December 2014 and provided a continuous data set characterizing Venus clouds and hazes over a time span of almost 14 Venus years thus enabling a detailed study of temporal and spatial variability. The polar orbit of Venus Express allowed complete latitudinal coverage. These studies are being complemented by JAXA Akatsuki orbiter that began observations in May 2016. This paper reviews the current status of our knowledge of the Venus cloud system focusing mainly on the results acquired after the Venera, Pioneer Venus and Vega missions.     

Scientific Planning and Commanding of the Rosetta Payload

ESA’s Rosetta mission was launched in March 2004 and is on its way to comet 67P/Churyumov-Gerasimenko, where it is scheduled to arrive in summer 2014. It comprises a payload of 12 scientific instruments and a Lander. All instruments are provided by Principal Investigators, which are responsible for their operations. As for most ESA science missions, the ground segment of the mission consists of a Mission Operations Centre (MOC) and a Science Operations Centre (SOC). While the MOC is responsible for all spacecraft-related aspects and the final uplink of all command timelines to the spacecraft, the scientific operations of the instruments and the collection of the data and ingestion into the Planetary Science Archive are coordinated by the SOC. This paper focuses on the tasks of the SOC and in particular on the methodology and constraints to convert the scientific goals of the Rosetta mission to operational timelines.     

Tracking and data acquisition for space exploration

The tracking and data acquisition systems provide the key link between the remote spacecraft and the scientific experimenter on the ground. The operation of the space experiment takes place through the links of command, telemetry and tracking. The evolution from the early very simple spacecraft missions toward more complex and sophisticated missions has been paralleled by a similar evolution in the tracking and data acquisition systems. The early Minitrack interferometer tracking system still carries the major tracking workload for space missions; however greater tracking accuracy requirements for more recent missions, such as the Orbiting Geophysical Observatory and the Apollo mission, have brought about the development of unified tracking and data acquisition systems which utilize hybrid pseudo-random code/sidetone ranging techniques. The data acquisition has evolved from analog telemetry systems to the present day heavy use of PCM digital telemetry. Likewise the command systems have evolved from early simple on/off command systems into PCM digital command data systems. The trend is toward greater real time control of more complex functions on board the spacecraft. Newer spacecraft are incorporating computer-type systems in the spacecraft which require programming and memory load through the ground command link. The most attractive concept for the next generation network for tracking and data acquisition is a network consisting of synchronous-orbit Tracking and Data Relay Satellites for covering launches and low-orbit earth satellites plus a few selected ground stations for supporting spacecraft in high earth orbit and lunar orbit.     

The magnetosheath and magnetotail of Venus

We describe the observational history and assess the current understanding of the magnetosheath and magnetotail of Venus, stressing recent developments. We make recommendations for research that can be done using existing observations, as well as desirable trajectory and instrumentation characteristics for future spacecraft missions.     

From Mercury to Pluto: A Common Approach to Mission Timekeeping

The successful launch of the New Horizons spacecraft for a rendezvous with Pluto and Charon and the continuing progress of the MESSENGER spacecraft toward Mercury now positions mankind to unlock mysteries of our solar system from Mercury to Pluto and beyond. Both missions, though very different in concept, use the same generic timekeeping system design. This paper explores how we maintain time on these spacecraft and how we establish on the ground the correlation between spacecraft time and Earth time. It further reviews the sub-millisecond correlation accuracy that has been demonstrated for the MESSENGER mission and the time accuracy we expect to achieve for that mission at Mercury and for the New Horizons mission at Pluto-Charon     

基于航天测控的实时仿真系统设计

航天器发射试验具有高风险性,而承担航天器测控的测控系统规模庞大、关系复杂,其测控设备、软件的正确性关系到试验成败。仿真技术的广泛应用,使设备、软件的正确性在发射任务前就可以得到充分验证,从而提高发射试验的安全性。以航天器试验任务为背景设计的实时仿真系统,在航天测量船上得到了成功应用,取得了良好的效果。     

Activity Planning for the Space Station

This paper presents an overview of the identification and selection process of experiments and payloads for manned space flight missions, emphasizing the scope and magnitude of the problem of doing activity planning and the need for a methodology to assure timely flight and appropriate spacecraft design. Conclusions and results derived from the past several years are presented together with an analysis of the current procedure for defining activity for the space station.     

Observations of low energy magnetospheric plasma outside the plasmasphere

After some introductory discussions about morphological concepts and limitations of various measurement techniques, existing low energy plasma data, orginating primarily from the GEOS, Dynamics Explorer, and Prognoz spacecraft, is described and discussed. The plasmasphere measurements are not included (but for some observations of plasmasphere refilling). It is finally concluded that we are very far from a complete picture of the low-energy plasma component in the magnetosphere and that this problem has to be given high priority in planning payloads of future space plasma physics missions.     

Flexible piloted Mars missions using the TIHTUS engine

The present investigation points out the potential of continuously propelled spacecraft for piloted Mars missions and compares them to impulsive propulsion (chemical and nuclear thermal) and ballistic trajectories. Although the results are related to piloted Mars missions, the stated issues raised hold true for a broad range of space missions. It is demonstrated that the use of impulsive propulsion leads to inflexible missions and may result in long total mission durations. Meanwhile, the use of continuous electric propulsion not only guarantees short total mission durations of Mars missions with moderate masses but also results in highly flexible missions. These criteria can be met with a continuous electric propulsion system that provides a thrust level of 100 N and 3000 s of specific impulse. Great potential lies in electric hybrid thrusters. The high-power, two-stage hybrid plasma thruster TIHTUS is currently being developed at the Institute of Space Systems (IRS). Its technology including preliminary laboratory testing results are presented.     

我国空间站运行的测控通信工作模式初探

在分析我国载人空间站在轨运行的任务特点和对测控通信提出的新要求的基础上,对测控通信工作模式进行了探讨。针对任务中心,采用分布式模式进行任务的组织和实施,建立常态化工作体系;针对测控通信资源的使用,对资源进行简化、优化,发挥天、地基各自优势,并实现天地基资源统一调度;针对在轨故障诊断和应急处置,提出了“天地联合,以地为主”的载人航天故障诊断模式和实现途径;针对空间站遥操作需求,提出了一套工作模式和实施流程;针对测控通信长期执行任务的可靠性,提出了任务中心容灾备份工作模式和通信路由的备份模式。以期为后续任务工作模式设计提供参考。     

The OSIRIS-REx Spacecraft and the Touch-and-Go Sample Acquisition Mechanism (TAGSAM)

The Origins, Spectral-Interpretation, Resource-Identification, Security and Regolith-Explorer (OSIRIS-REx) spacecraft supports all aspects of the mission science objectives, from extensive remote sensing at the asteroid Bennu, to sample collection and return to Earth. In general, the success of planetary missions requires the collection, return, and analysis of data, which in turn depends on the successful operation of instruments and the host spacecraft. In the case of OSIRIS-REx, a sample-return mission, the spacecraft must also support the acquisition, safe stowage, and return of the sample. The target asteroid is Bennu, a B-class near-Earth asteroid roughly 500 m diameter. The Lockheed Martin-designed and developed OSIRIS-REx spacecraft draws significant heritage from previous missions and features the Touch-and-Go-Sample-Acquisition-Mechanism, or TAGSAM, to collect sample from the surface of Bennu. Lockheed Martin developed TAGSAM as a novel, simple way to collect samples on planetary bodies. During short contact with the asteroid surface, TAGSAM releases curation-grade nitrogen gas, mobilizing the surface regolith into a collection chamber. The contact surface of TAGSAM includes “contact pads”, which are present to collect surface grains that have been subject to space weathering. Extensive 1-g laboratory testing, “reduced-gravity” testing (via parabolic flights on an airplane), and analysis demonstrate that TAGSAM will collect asteroid material in nominal conditions, and a variety of off-nominal conditions, such as the presence of large obstacles under the TAGSAM sampling head, or failure in the sampling gas firing. TAGSAM, and the spacecraft support of the instruments, are central to the success of the mission.     

交会对接任务天基双目标测控通信设计

针对交会对接任务对测控通信提出的高覆盖率和双目标测控等需求的问题,分析2颗中继卫星能够提供的覆盖率,设计双目标测控工作模式以及天地协同机制,计算中继链路的性能,分析表明,天基测控可提供约72%的测控覆盖率,能够支持双目标测控,链路余量满足要求;统计了任务中关键段落的测控通信工作情况,分析结果和实际任务情况验证了天基测控在交会对接任务测控通信中的重要作用;最后提出后续任务改进和完善的建议。