一种改进的LMS算法及其在自适应消噪中的应用

介绍了一种改进的LMS自适应滤波算法及其在自适应噪声对消中的应用。该算法利用误差信号的相关值去调节步长,解决了算法收敛时间与稳态误差间的矛盾,为实际应用提供了更大的灵活性。它同时实现了均方误差小和收敛速度快,并且降低了LMS算法对噪声的敏感性。文中最后给出了仿真结果,仿真结果与理论分析是一致的。     

新的变步长LMS算法及其在自适应噪声对消中的应用

介绍了一种基于均方误差估计的新变步长LMS自适应滤波算法。与传统的LMS算法相比,该算法具有较快的收敛速度和较小的稳态失调。将该算法应用于自适应噪声对消系统的仿真中,给出了计算机仿真结果,仿真结果与理论分析一致,证明了新算法的优越性。     

涡扇发动机故障诊断中粒子滤波改进方法

针对标准粒子滤波算法诊断步数多且诊断结果噪声水平高的问题,提出伪协方差和自适应似然分布结合的改进粒子滤波算法。该算法通过使用伪协方差代替了粒子集协方差,保证采样得到的粒子能够更真实地反映突变情况,减少诊断步数;通过对似然分布自适应调整,增加其与先验分布的重叠区域,提高抽样率,增加有效粒子数,降低诊断结果噪声水平。发动机健康参数估计仿真结果表明:与标准粒子滤波算法相比,改进的粒子滤波算法能使诊断速度提高约27%,诊断精度提高约38%,有效地减少了突变故障的诊断步数,并显著降低了诊断结果的噪声水平。     

基于有色噪声自回归建模的惯性/卫星交互多模型滤波导航算法

针对卫星量测噪声为有色噪声导致惯性/卫星组合导航系统滤波精度降低的问题,提出了一种基于有色噪声自回归建模的自适应交互多模型滤波算法。建立了有色噪声自回归模型,通过量测残差序列获取拟合模型系数,从而对称扩展得到系数模型集;并构建了交互多模型滤波框架,实现不同模型滤波器之间的数据融合。仿真结果表明,相比于传统卡尔曼滤波算法,该方法能有效改善有色噪声对滤波带来的影响并提高组合导航系统定位精度,具有较好的工程应用参考价值。     

基于LMS格型算法的自适应参数谱估计方法

研究了自适应参数谱估计的基本原理,提出了基于最小均方误差（MMSE）准则的LMS格型滤波算法实现自适应参数谱估计的方法。通过对仿真测试信号和线性调频信号的计算表明,该方法能够在改善谱分辨率的同时提高运算效率,满足遥测速变信号的处理和分析计算的要求。     

基于数字滤波的低频时码秒脉冲抖动平滑方法研究

低频时码授时信号在接收时,由于环境等因素的影响会导致解调得到的低频时码秒脉冲出现抖动。为减小该抖动现象对低频时码定时精度的影响,基于我国低频时码授时系统(BPC),研究并设计基于数字滤波的秒脉冲抖动平滑方法,通过仿真实验,验证分析了最小均方误差(LMS)自适应滤波算法和卡尔曼滤波算法的有效性和抖动平滑性能。结果表明,低频时码秒脉冲的抖动现象可以通过BPC 1PPS (one pulse per second)和本地1PPS之间的相位差波动情况反映;LMS自适应滤波算法和卡尔曼滤波算法对BPC 1PPS的抖动平滑处理均有明显效果,卡尔曼滤波算法的抖动平滑效果更优,但存在一定的收敛时间,LMS自适应滤波算法的滤波结果响应速度快,但抖动平滑性能受滤波器阶数的影响。所以,在实际应用中,应根据实际需求选择合适的滤波器及相关参数。     

自适应UKF在北斗定位算法中的应用

北斗导航系统发展日益成熟,介绍了北斗定位解算与GPS解算的差异,针对扩展Kalman滤波(Extended Kalman Filter,EKF）算法在北斗解算过程中容易引入非线性误差,无迹Kalman滤波(Unscented Kalman Filter,UKF）算法受初值和系统噪声影响较大问题,提出了一种自适应无迹Kalman滤波(Adaptive Unscented Kalman Filter,AUKF）北斗定位解算算法。该算法利用观测残差信息构建自适应渐消矩阵,消除量测噪声异常带来的影响,同时提高了滤波精度。实验表明,与EKF和UKF定位解算算法相比,AUKF算法在定位精度和对系统噪声鲁棒性方面都有所提高,是一种可靠稳定的北斗定位算法。     

车载SINS／GPS组合导航系统自适应联合滤波模型

在建立车载组合导航系统联合滤波模型及算法的基础上,定义了联合滤波模型融合信息在各子滤波器中的分配准则; 实现了联合滤波模型信息分配系数的自适应调节; 理论分析和计算机仿真结果均表明,引入该准则的自适应联合滤波模型及算法大大提高了系统容错性和定位精度     

基于SAR图像匹配结果可信度评价的INS/SAR自适应Kalman滤波算法

在惯性导航系统（INS）/合成孔径雷达（SAR）组合导航系统中,SAR图像易受斑点噪声的影响,图像匹配的精度对整个导航系统精度的影响十分明显,能够准确地分析SAR图像匹配过程中的误差特性,利用有效的图像匹配信息辅助INS进行组合定位尤为重要。针对上述问题,在加权Hausdorff距离匹配算法的基础上,对影响SAR图像匹配精度的因素进行了分析,提出了一种基于模糊推理的匹配结果可信度评价准则,经过可信度筛选,将有效的匹配信息与INS进行组合;对合理范围内的匹配误差变化引起量测噪声统计特性发生变化,进而导致Kalman滤波精度下降的问题,研究采用改进的Sage-Husa自适应滤波算法对量测噪声方差阵进行动态调整,使其更加接近系统的当前状态。搭建仿真验证平台对所提算法进行了验证,结果表明,该算法能够在合理的匹配误差范围内,有效地筛选出可信的图像匹配结果,相比常规Kalman滤波算法,显著地提升了INS/SAR组合导航系统水平方向的定位精度。     

增广误差模型算法在目标跟踪中的应用

针对目标机动运行过程中,滤波模型与机动状态模型失配的问题,提出了一种新的增广状态误差滤波模型。不同于现有增广方案,该模型从模型失配所致状态滤波误差的角度出发,将状态估计误差增广为一状态量,通过滤波估计后用其校正原状态量。算法分析表明,该增广滤波模型具有自适应调节多重渐消因子的等效特性,增强了对目标的跟踪能力。基于该增广状态误差滤波模型,给出了滤波算法设计并进行了仿真实验。实验结果表明,基于该模型的滤波算法在对机动目标进行跟踪时具有更强的鲁棒性。     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.     

Preparation of Highly Dispersed Antimony-doped Tin Oxide Nano-powder via Ion-exchange Hydrolysis of SnCl4 and SbCl3 and Azeotropic Drying

Antimony-doped tin hydroxide colloid precipitates have been synthesized by hydrolysis of SnCl4 and SbCl3 using: (1) an ion-exchange hydrolysis to remove chlorine ions, and (2) isoamyl acetate as an azeotropic solvent to obviate water. The obtained dried powder is of high dispersivity without any need for further grinding. The size and dispersivity of the final particles are investigated with the aid of TG-DTA, BET, XRD and TEM. After having calcined, the antimony-doped tin oxide nanopowder possesses a tetragonal rutile structure with high dispersivity, uniform particles and low hard agglomeration.     

Effects of Mo on the Microstructure and Hydrogen Sorption Properties of Ti-Mo Getters

The effects of Mo on the microstructure evolution, porosity and hydrogen sorption properties of Ti-Mo getters are investigated in this work. The results show that the addition of Mo prolongs the densification process of Ti-Mo getters and results in a significant amount of sintered pores. With the Mo content increasing, the porosity of getters firstly increases reaching the maximum value as it at- tains about 7.5wt.%, and then drops. At the room temperature, the hydrogen sorption property of getters increases progressively with the Mo content increasing, but the tendency is not very clear before its content lies below 2.5wt.%. When the Mo content achieves about 7.5wt.%, the hydrogen sorption property proves to be the best. The discussion is made about the above mentioned phenomena inclusive of hydrogen sorption properties of getters under different activation conditions (from 500-750 ℃).     

超声速燃烧数值模拟中的湍流与化学反应相互作用模型

高精度数值模拟有助于理解超声速湍流燃烧中湍流与化学反应的相互作用,可为发动机燃烧室等工程应用设计提供可靠的预测模型。除直接数值模拟外,目前在湍流燃烧应用中使用的大涡模拟和雷诺平均Navier-Stokes模拟均需要借助模型模化发生在湍流小尺度上的流动与化学反应过程对湍流大尺度运动的影响。现有的湍流与化学反应相互作用模型大致可分为:火焰面类模型和概率密度函数类模型,2类模型在不同的应用中各自具有优势和局限性。此外,现有模型大都基于低马赫数燃烧,而超声速燃烧中通常会伴随快速混合、局部熄火和再着火以及激波等复杂过程,这为发展其中的湍流与化学反应相互作用模型提出了更多的挑战。     

适于低轨卫星IP网络的单核共享树组播算法(英文)

为了解决低轨卫星IP网络中现有典型源组播算法的信道资源浪费问题,本文提出了一套单核共享树组播算法,即核心群合并共享树(CCST)和加权核心群合并共享树(w-CCST)算法。CCST 算法包括动态近似中心(DAC)选核方法和核心群合并组播路径构建方法。DAC方法专为周期、规律运动的低轨卫星网络提出,不需要复杂的星上计算。在核心群合并方法中,以核节点作为初始核心群,通过核心群和剩余组成员的最短路径方法逐步扩展直至整棵组播树构建完成,从而使得组播树的树代价最小,大大提高了网络的带宽利用率和组播传输效率。w-CCST 算法中所提出的加权因子可以调整树代价和端到端传播时延之间的折衷程度,因此,可以通过调整加权因子来适度增大树代价、降低端到端传播时延以支持某些端到端时延要求苛刻的实时组播业务。最后,与低轨卫星 IP 网络中典型算法进行了性能比较,仿真结果说明,CCST 算法的平均树代价比其它算法显著降低,w-CCST 算法的平均端到端传播时延小于 CCST 算法。     

Jet Vectoring Control Using a Novel Synthetic Jet Actuator

A primary air jet vectoring control system with a novel synthetic jet actuator (SJA) is presented and simulated numerically. The results show that, in comparison with an existing traditional synthetic jet actuator, which is able to perform the duty of either “push” or “pull”, one novel synthetic jet actuator can fulfill both “push” and “pull” functions to vector the primary jet by shifting a slide block inside it. Therefore, because the new actuator possesses greater efficiency, it has potentiality to replace the existing one in various appli- cations, such as thrust vectoring and the reduction of thermal signature. Moreover, as the novel actuator can fulfill those functions that the existing one can not, it may well be expected to popularize it into more flow control systems.     

Nonlinear Adaptive Slewing Motion Control of Spacecraft Truss Driven by Synchronous V-gimbaled CMG Precession

The slewing motion control of a truss arm driven by a V-gimbaled control-moment-gyro (CMG) is a nonlinear control problem. The V-gimbaled CMG consists of a pair of gyros that must precess synchronously. The moment of inertia of the system, the angular momentum of the gyros and the external disturbances are not exactly known. With the help of feedback linearization and recursive Lyapunov design method, an adaptive nonlinear controller is designed to deal with the unknown items. Performance of the proposed controller is verified by simulation.     

An SOR Implicit Time-accurate Scheme in Calculating Unsteady Flows

A new time-accurate marching scheme for unsteady flow calculations is proposed in the present work. This method is the combination of classical Successive Over-Relaxation (SOR) iteration method and Jacobian matrix diagonally dominant splitting method of LUSGS. One advantage of this algorithm is the second-order accuracy because of no factorization error. Another advantage is the low computational cost because the Jacobian matrices and fluxes are only calculated once in each physical time step. And, the SOR algorithm has better convergence property than Gauss-Seidel. To investigate its accuracy and convergency, several unsteady flow computa- tional tests are carried out by using the proposed SOR algorithm. Roe’s FDS scheme is used to discritize the inviscid flux terms. Un- steady computational results of SOR are compared with the experiment results and those of Gauss-Seidel. Results reveal that the numerical results agree well with the experimental data and the second-order accuracy can be obtained as the Gauss-Seidel for unsteady flow computations. The impact of SOR factor is investigated for unsteady computations by using different SOR factors in this algorithm to simulate each computational test. Different numbers of inner iterations are needed to converge to the same criterion for different SOR factors and optimal choice of SOR factor can improve the computational efficiency greatly.