网络攻击下无人机信息物理系统的自适应状态估计

针对网络攻击下无人机信息物理系统(CPS)的安全状态估计问题,提出了一种基于自适应方差极小化的递推状态估计器(AVMRE)。通过将针对控制输入和传感器数据的恶意攻击分别建模为状态和量测方程中的未知干扰项,建立了未知干扰解耦状态递推估计器,实现滤波误差中的量测未知干扰解耦,利用滤波残差设计自适应调整因子对估计误差上界进行极小化,应用最小方差估计准则求解出算法中的量测增益反馈矩阵。同时引入事件触发机制,使得系统在保持一定估计精度的情况下节省通信资源。此外,给出了滤波误差指数有界性的充分条件。无人机飞行模型仿真验证了本文算法相比传统算法的有效性和优越性。     

一种带随机偏差的分布式信息融合滤波算法

在通信、计算机、信号处理、自动控制中,对于带有未知的干扰和偏差的随机系统的状态估计已经广泛出现。在现实环境中,不同的传感器可能受到不同的干扰影响。研究随机系统的状态估计问题在实际应用中具有重要的意义。对带有随机偏差的线性随机系统,将系统转换为多模型结构的特殊情况。利用最小方差的最优加权融合估计算法,获得了分布式信息融合滤波算法。通过仿真可以看出,分布式信息融合算法要比局部估计算法具有更高的精度,算法具有分布式结构,这使其具有更好的鲁棒性和可靠性。     

模型基涡轴发动机传感器故障诊断研究

基于干扰解耦思想,针对涡轴发动机工作中传感器瞬时断路硬故障模式,提出一种基于模型的涡轴发动机未知输入观测器传感器硬故障诊断方法。通过对地面、高空工作的涡轴发动机不同传感器故障的模拟,验证了该故障诊断方法的有效性。结果表明,基于模型设计的未知输入观测器(UIO),能够对系统输入中的测量干扰未知输入信号进行有效解耦,同时传感器故障信息通过UIO计算获得的输出估计具有鲁捧残差性能。     

基于鲁棒故障观测器的非线性离散系统容错控制设计

针对存在执行器故障以及未知干扰的非线性离散系统,提出了一种鲁棒故障估计与容错控制方法。首先在未知系统干扰作用下,设计鲁棒故障观测器实现系统状态和执行器故障的同步估计;然后根据鲁棒故障观测器得到的系统状态估计和故障估计信息设计容错控制器,进行状态反馈容错控制,同时基于D稳定与H_∞控制理论对鲁棒故障观测器和容错控制器进行设计,实现了多约束条件下的故障估计与容错控制;最后用飞行控制系统模型验证了所提方法的有效性。     

一种基于高斯混合模型粒子滤波的故障预测算法

针对一类故障预测问题提出了一种基于粒子滤波的故障预测算法。在算法的状态估计阶段,采用联合估计和粒子滤波同时估计对象系统故障演化模型状态和未知参数的后验分布。在算法的状态预测阶段,采用了两种不同的计算方法：一种方法是对状态变量当前时刻的后验分布进行迭代采样,从而获得未来时刻的状态变量的先验分布;另一种方法是采用数据驱动的方法预测未来一段时间内对象系统的量测信息,从而将未来时刻状态变量的先验分布的预测问题转化为一个求解后验分布的估计问题。采用高斯混合模型近似随机变量分布密度,从而将两种方法的计算结果在一个统一的预测框架之下进行有效交互,进一步提高了预测的准确性和可靠性。在算法的决策阶段,在获取的故障演化模型状态变量分布基础上,结合一定的故障判据近似计算出对象系统剩余寿命分布。故障预测仿真实验结果证明了所提算法的有效性。     

命中概率估计

本文首先建立由制导误差引起的脱靶量的分布规律，然后给出命中靶而上圆城的概率表示。对于命中概率的估计，讨论了一致、最小方差、无偏估计（UMVU估计）。对于样本容量较小的场合，给出了自助估计方法。     

基于未知输入观测器的非线性动态系统故障估计

针对一类受扰非线性动态系统的执行器故障估计问题,提出一种未知输入观测器来实现故障估计。首先,通过坐标变换将原系统转化为合适的形式;其次,采用线性矩阵不等式与Lyapunov泛函分别设计H_∞输出反馈控制器和未知输入观测器,在此基础上实现对系统中执行器故障的渐近估计;最后,通过机械臂系统仿真分析并验证了所提方法的有效性。与已有方法相比,所提方法不要求故障可导,也不要求故障或干扰上界已知,因此易于在工程实际中实现对非线性系统执行器故障的估计。     

基于模糊奇偶方程的非线性系统传感器故障诊断

 给出了一种非线性系统传感器的故障诊断方法。该方法将T-S 模糊模型、全解耦奇偶方程和参数估计相结合,同时对非线性系统的多个传感器的故障进行检测、隔离与识别。设计出用于产生残差的线性系统全解耦奇偶方程,并给出了全解耦奇偶向量的存在条件,全解耦奇偶方程产生的残差仅对一个传感器故障敏感,而对系统状态、扰动输入和其它传感器输出解耦。引入T-S 模型将全解耦奇偶方程推广到非线性系统中得到了模糊奇偶方程。传感器的故障模型表示为刻度因子和偏差的形式,根据残差信息应用卡尔曼估计方法可识别出故障模型的参数。最后给出了某型号飞机控制系统传感器的故障诊断仿真实例。     

用于涡轴发动机传感器故障诊断的未知输入观测器干扰矩阵估算

针对处理涡轴发动机控制系统传感器故障诊断问题时有着良好性能的未知输入观测器展开研究,分析了与系统建模误差相关的干扰矩阵对未知输入观测器观测出的系统状态准确度的影响,提出了一种基于全阶状态观测器的涡轴发动机系统模型干扰矩阵的估算方法,该方法对某一固定工况下的干扰矩阵估算十分准确,使得根据此干扰矩阵设计出的未知输入观测器可以完全不受系统建模误差的影响.在此基础上,又给出了一种适应于更广泛工况范围的干扰矩阵近似方法,使得变工况下的未知输入观测器一样不受建模误差的影响.仿真结果表明:基于该方法估算出的干扰分布矩阵可以保证观测器具有良好的性能,在变工况下对发动机输出量估计残差的二范数不大于2.      

基于复合地标导航的动平台四旋翼飞行器自主优化降落技术

针对四旋翼飞行器在依靠地标导航完成动平台自主降落任务中存在的目标易丢失、地标定位死区大和降落可靠性差等问题,设计了一种基于复合地标导航的动平台四旋翼飞行器自主优化降落系统。该系统以圆环地标和二维码构成复合地标来解决仅用单一地标定位时存在的定位死区大和定位范围小等问题。针对地标识别丢失、动平台车轮打滑和码盘标定不精确等问题,建立动平台的精确运动模型同时考虑码盘包含未知测量偏差,基于扩展卡尔曼滤波器实现了对动平台连续位姿的在线估计。最终,基于动平台位姿估计结果以最小Jerk指标设计降落轨迹和降落策略,实现了四旋翼飞行器在动平台上高效平稳的降落。为验证所提系统的有效性,设计了仿真和实际降落实验,验证了所提复合地标实现摄像头距离在0.5~6.0 m内的综合完整定位;所设计的动平台状态估计器能在码盘存在未知测量偏差的情况下准确估计出平台的实时位姿,同时所提自主优化降落策略和轨迹规划算法保证了可靠的动平台降落。     

State estimate for stochastic systems with dual unknown interference inputs

Stochastic system state estimation subject to the unknown interference input widely exists in many fields, such as the control, communication, signal processing, and fault diagnosis. However, the research results are mostly limited to the stochastic system in which only the dynamic state model or the measurement model concerns the individual unknown interference input, and the state model and the measurement model are both with the same unknown interference input. State estimate of the stochastic systems where the state model and the measurement model contain dual Unknown Interference inputs (dual-UI) with different physical meanings and mathematical definitions is concerned here. Firstly, the decoupling condition with the Unknown Interference input in the State model (S-UI) is shown, which introduces the decoupled system with the adjacent Measurement concerned Unknown Interference inputs (M-UI) appearing in the state model and the measurement model. Then, through defining the Differential term of the adjacent M-UI (M-UID), the equivalent system with only M-UID in the state model is obtained. Finally, considering the design freedom of the equivalent system, the decoupling filter in the minimum mean square error sense and the adaptive minimum upper filter with different applicable conditions are represented to obtain the optimal and sub-optimal state estimate, respectively. Two simulation cases verify the effectiveness and superiority compared with the traditional methods.     

机动目标拦截末制导状态估计器的误差特性

 针对大机动目标拦截问题,分析了末制导阶段目标机动条件下状态估计器的误差特性。首先将目标机动输入未知时的状态估计器模型表示为一随机线性混合系统,当混合系统的模式跳变事件满足可观测性条件时,模式决策过程可等效为真实模式的延迟;随后推导了模式决策延迟条件下估计误差的动态方程与传递函数,并得到了一定误差要求下模式决策延迟的上界与目标机动模式逗留时间的下界;最后通过空空导弹拦截高速战机的典型实例验证了该理论分析的正确性。研究结果为设计此类线性混合系统估计器提供了理论依据。     

地空协同防空目标抗差跟踪算法

针对现有系统误差配准算法以已知系统误差变化模型为前提条件、相应的目标状态估计易受系统误差配准结果影响等不足之处,在机载雷达与地基雷达协同防空预警体系下,对系统误差存在情况下的目标跟踪问题进行了研究,并提出了有效的地空协同防空目标抗差跟踪算法。仿真结果表明所提算法可得到无偏、稳定、有效的目标状态估计,并且相对于系统误差目标状态联合估计算法,所提算法计算量小,对系统误差变化有很强的鲁棒性,可适应实际工程应用中可能出现的异常情况,为后续决策提供稳定有效的目标信息。     

旋转式SINS的自标校技术研究

惯性器件常值及慢变误差是影响捷联惯导系统精度的主要因素之一,所以在捷联惯导系统出厂前需要对常值及慢变误差参数进行标定。但这些误差参数会随时间发生变化,对于高精度捷联惯导系统,每次启动后需要对惯性器件的误差参数进行重新标校。针对光纤惯导系统,建立了IMU误差模型,并根据提出的旋转式捷联惯导系统自标校转位方案原则设计出了一种8位置自标校方案,对惯性器件标定参数进行激励和辨识,并建立了Kalman滤波状态方程及量测方程,对惯导系统误差参数进行在线标定。实验结果表明,该方案对其惯性器件误差参数能进行准确估计,具有一定的参考价值。     

A Polynomial Prediction Filter Method for Estimating Multisensor Dynamically Varying Biases

The estimation of the sensor measurement biases in a multisensor system is vital for the sensor data fusion. A solution is provided for the estimation of dynamically varying multiple sensor biases without any knowledge of the dynamic bias model pa- rameters. It is shown that the sensor bias pseudomeasurement can be dynamically obtained via a parity vector. This is accom- plished by multiplying the sensor uncalibrated measurement equations by a projection matrix so that the measured variable is eliminated from the equations. Once the state equations of the dynamically varying sensor biases are modeled by a polynomial prediction filter, the dynamically varying multisensor biases can be obtained by Kalman filter. Simulation results validate that the proposed method can estimate the constant biases and dynamic biases of multisensors and outperforms the methods reported in literature.     

Joint parameter and state estimation for stochastic uncertain system with multivariate skew t noises

Due to the pulse interference, measurement outliers and artificial modeling errors, the multivariate skew t noise widely exists in the real environment. However, to date, little attention has been paid to the state estimation for systems in which the process noise and the measurement noise are both modeled as the heavy-tailed and skew non-Gaussian noise. In this paper, the multivariate skew t distribution is utilized to model the heavy-tailed and skew non-Gaussian noise. Then a probabilistic gra...     

攻击角约束的拦截弹制导控制一体化设计

针对拦截弹的攻击角约束制导问题,提出了一种基于反演滑模和扩张状态观测器(ESO)的制导控制一体化(IGC)设计方法。首先,基于弹目相对运动方程和拦截弹的非线性动力学方程,建立了拦截弹IGC模型,设计了ESO估计目标加速度和自动驾驶仪回路的干扰;在此基础上,基于干扰估计值和反演滑模方法,设计了IGC算法获取虚拟控制力矩,同时基于李雅普诺夫理论分析了闭环系统的稳定性;然后,利用动态控制分配技术将所获取的期望控制力矩分配到实际执行机构;最后,通过仿真结果验证了所设计的IGC+ESO算法的有效性。     

Detection of interference/jamming and spoofing in a DGPS-aidedinertial system

Previous research at the Air Force Institute of Technology (AFIT) has resulted in the design of a differential Global Positioning System (DGPS) aided INS-based (inertial navigation system) precision landing system (PLS) capable of meeting the FAA precision requirements for instrument landings. The susceptibility of DGPS transmissions to both intentional and nonintentional interference/jamming and spoofing must be addressed before DGPS may be safely used as a major component of such a critical navigational device. This research applies multiple model adaptive estimation (MMAE) techniques to the problem of detecting and identifying interference/jamming and spoofing in the DGPS signal. Such an MMAE is composed of a bank of parallel filters, each hypothesizing a different failure status, along with an evaluation of the current probability of each hypothesis being correct, to form a probability-weighted average state estimate as an output. For interference/jamming degradation represented as increased measurement noise variance, simulation results show that, because of the good failure detection and isolation (FDI) performance using MMAE, the blended navigation performance is essentially that of a single extended Kalman filter (EKF) artificially informed of the actual interference noise variance. However, a standard MMAE is completely unable to detect spoofing failures (modeled as a bias or ramp offset signal directly added to the measurement). This work describes a moving-bank pseudoresidual MMAE (PRMMAE) to detect and identify such spoofing. Using the PRMMAE algorithm, spoofing is very effectively detected and isolated; the resulting navigation performance is equivalent to that of an EKF operating in an environment without spoofing     

A new adaptive Kalman filter for navigation systems of carrier-based aircraft

The features of carrier-based aircraft’s navigation systems during the approach and landing phases are investigated. A new adaptive Kalman filter with unknown state noise statistics is proposed to improve the accuracy of the INS/GNSS integrated navigation system. The adaptive filtering algorithm aims to estimate and adapt the unknown state noise covariance Q in high dynamic conditions, when the measurement noise covariance R is assumed to be known empirically in advance. The new adaptive Kalman ...