Modified Costas signal

A modification to the Costas signal is suggested. It involves an increase of the frequency separation /spl Delta/f beyond the inverse of the subpulse duration t/sub b/ combined with adding linear FM (LFM) with bandwidth B, in each subpulse. Specific relationships between /spl Delta/f and B will prevent autocorrelation grating lobes, that would normally appear when t/sub b//spl Delta/f>1.     

A multiobjective optimization approach to determine the parameters of stepped frequency pulse train

Frequency stepping techniques are commonly used in modern radar system to get high range resolution with the disadvantage that its autocorrelation function (ACF) yield undesirable “grating lobes”. Wider mainlobe deteriorates the range resolution capability of the waveform and higher peak sidelobe either hides the small targets or causes the false target detection. Several techniques have been used to choose the parameters of linear frequency modulated (LFM) pulse train to suppress the grating lobes without paying much attention to the mainlobe width and peak sidelobe level. In this paper a multiobjective optimization (Nondominated Sorting Genetic Algorithm-II (NSGA-II)) approach is proposed to optimize the parameters of the LFM pulse train to achieve reduced grating lobes, low peak sidelobe level and narrow mainlobe width. The optimization problem has been studied in two different ways: first one is associated with the reduction of grating lobes and the minimization of peak sidelobe level of the ACF with constraints and second one is related to the minimization of the peak sidelobe level and mainlobe width of the ACF with constraints. Simulation studies have been carried out to justify the potentiality of the proposed approach.     

Removing autocorrelation sidelobes by overlaying orthogonal coding on any train of identical pulses

A coherent train of identical linear FM (LFM) pulses is used extensively in radar because of its good range and Doppler resolution. Its relatively high autocorrelation function (ACF) sidelobes are sometimes reduced through spectrum shaping (e.g., nonlinear FM, or intrapulse weighting on receive). We show how to completely remove most of the ACF sidelobes about the mainlobe peak, without any increase to the mainlobe width, by diversifying the pulses through overlaying them with orthonormal coding. A helpful byproduct of this design is reduced ACF recurrent lobes. The overlaid signal also results in reduced Doppler tolerance, which can be considered as a drawback for some applications. The method is applied to several trains of identical pulses (LFM and others) using several orthonormal codes. The effect on the three important properties of the radar signal: ACF, ambiguity function (AY), and frequency spectrum is presented. The effect on Doppler tolerance is studied, and implementation issues are discussed. The new design is also compared with complementary and sub-complementary pulse trains and is shown to be superior in many aspects.     

Explicit formulas for two state Kalman, H/sub 2/ and H/sub /spl infin// target tracking filters

The continuous time, two state, target tracking problem is considered from the Kalman, H/sub 2/, and H/sub /spl infin// filter viewpoint. While previous treatments were numerical in nature, analytic transient responses and infinite horizon solutions with analytic performance expressions are presented here. Tracking indices, involving the maneuver and measurement uncertainties, are shown to have a role for both the steady state and transient responses. In addition, the H/sub /spl infin// tracker has a sensor index involving the performance bound and measurement uncertainty, which, along with the tracking index, plays a significant role in the H/sub /spl infin// tracker expressions. Analytical expressions for the probability of target escape, the probability that the target position will be outside the radar beamwidth (BW), are developed not only to compare the performance of various trackers, but also as a design tool to meet tracking specifications. Examples illustrate the performance of the target trackers as a function of the error gain upper bound.     

A noise insensitive solution to an ambiguity problem in spectralestimation

The instantaneous frequency measurement (IFM) receiver is capable of measuring the center frequency of single frequency pulses over a wide range (bandwidth) of center frequencies. Because of various constraints, the frequency resolution requirement results in long correlator delay times that reduce the single correlator bandwidth. A large bandwidth can be achieved only if two or more correlators are used. The problem of estimating frequency is then reduced to the simultaneous congruence problem of number theory. A design procedure is presented for solving the congruence problem for a given amount of noise protection, a stated frequency resolution, a minimum bandwidth, and a fixed level of precision (bits) in the IFM receiver     

Robust neuro-H/sub /spl infin// controller design for aircraft auto-landing

A robust neuro-control scheme is presented for aircraft auto-landing under severe wind conditions and partial loss of control surfaces. In the scheme, a dynamic radial basis function network (RBFN) called minimal resource allocating network (MRAN), that incorporates a growing and pruning strategy, is utilize to aid an H/sub /spl infin// controller using a feedback-error-learning mechanism. The neural network uses only online learning and is not trained "a priori". Specifically, the performance of this neuro-controller for aircraft auto-landing in a microburst along with a partial loss of control effectiveness is analyzed and compared with other control schemes. Simulation studies show that the performance obtained by the neuro-H/sub /spl infin// control scheme is better than the other control schemes under failure and extreme wind conditions.     

Phase-Lock Loop Jump Phenomenon in the Presence of Two Signals

Jump phenomena are known to exist in many non-linear systems [I], [2], [3]. The non-linear analysis presented in this paper explains and predicts the conditions for the jump phenomenon that is observed in a phase-locked loop (PLL) preceded by an automatic gain control (AGC). The jump phenomenon occurs when the frequency separation AM of two sinusoids at the input to the AGC is greater than the bandwidth B of the linearized PLL. If the loop is initially locked to the stronger signal, the weaker signal will frequency-modulate the PLL voltage-controlled oscillator (VCO) with a modulation frequency AI. The amplitude S2 of the weaker signal al can be increased until it becomes greater than the amplitude Si of the signal being tracked, without causing the loop to lose lock; i. e., the VCO continues to track the original signal. However, if the ratio of the amplitudes S2 S1 = R is increased above some critical value RC > 1, the loop will lose lock on the original signal, and jump to track the interfering signal. If the frequency separation is at least twice the PLL bandwidth, a good approximation for this critical ratio is Rc ? ?w/B.     

Reduced-order H/sub /spl infin// and L/sub 2/-L/sub /spl infin// filtering via linear matrix inequalities

Necessary and sufficient conditions are derived for the existence of a solution to the continuous-time and discrete-time reduced-order H/sub /spl infin// and L/sub 2/-L/sub /spl infin// filtering problems. These conditions are expressed in terms of linear matrix inequalities (LMIs) and a coupling nonconvex matrix rank constraint. Convex LMI problems are obtained for the full-order and the zeroth-order filtering. An explicit parametrization of all reduced-order filters that correspond to a feasible solution is derived in terms of a contractive matrix, and iterative algorithms are proposed to solve the reduced-order filtering problems using alternating projections.     

Development of three-phase switch-mode rectifier using single-phase modules

This paper presents a three-phase (3/spl phi/) switch-mode rectifier (SMR) consisting of three 1 /spl phi/ SMRs, two center-tapped autotransformers and three changeover switches. The ac input sides of three modules are /spl Delta/-connected, and their dc output sides are connected in parallel. As any one module fault occurs, the remaining two modules becomes modified T-connected and continuously perform three-phase rectification with good line drawn power quality. When two constituted 1/spl phi/ modules are faulted, the proposed 3/spl phi/ SMR will be operated as 1/spl phi/ SMR. The quantitative and robust voltage regulation controls for the developed SMR are made to consider the effects of changes of system parameters, operating condition, and number of connected modules.     

Mixed H/sub 2//H/sub /spl infin// filtering for uncertain systems with regional pole assignment

The mixed H/sub 2//H/sub /spl infin// filtering problem for uncertain linear continuous-time systems with regional pole assignment is considered. The purpose of the problem is to design an uncertainty-independent filter such that, for all admissible parameter uncertainties, the following filtering requirements are simultaneously satisfied: 1) the filtering process is asymptotically stable; 2) the poles of the filtering matrix are located inside a prescribed region that compasses the vertical strips, horizontal strips, disks, or conic sectors; 3) both the H/sub 2/ norm and the H/sub /spl infin// norm on the respective transfer functions are not more than the specified upper bound constraints. We establish a general framework to solve the addressed multiobjective filtering problem completely. In particular, we derive necessary and sufficient conditions for the solvability of the problem in terms of a set of feasible linear matrix inequalities (LMIs). An illustrative example is given to illustrate the design procedures and performances of the proposed method.     

Small Ku-band phased array antenna system

A four-element phased array antenna prototype with varactor tuning has been constructed. The design employs aperture-fed quarter-wave patch elements and loaded-line phase shifters, having a phase adjustment range of about 50/spl deg/, which enables beam steering up to 13/spl deg/ from the array boresight. The system is suitable as a building block for larger arrays and shows as such a maximum gain of 7.7 dBi and an impedance bandwidth of 1 GHz. The sidelobe level is better than -13 dB. Problems encountered include parasitic resonances which disturb matching, and partially deteriorate the radiation pattern. Additionally, mechanical manufacturing tolerances of the microstrip boards were not always adequate, whereby a 6% shift in the center frequency, some impedance errors, and phasing inaccuracies were observed.     

Digital and Analog Subcomplementary Sequences for Pulse Compression

Golay's complementary pairing has been a method to increase the utility of binary sequences, because of the temporal sidelobe suppression in the autocorrelation vector summation. Complementary sets of Tseng and Liu and of Hollis exhibit the same effect when several autocorrelations are combined. These complementary pairs and sets of sequences can be extended into long complementary chains by a simple transformation. This transformation is extended here to all pulse compression waveforms. By this method, even though analog complementary sequences cannot be formed, a new class of waveforms, called subcomplementary waveforms, can be formed. Following these rules, repetition of waveforms such as linear frequency modulation (LFM) or linear stepped frequency modulation (LSFM) in a prescribed manner is possible without creating autocorrelation grating lobes or repetitive sidelobes. This method is equally applicable to all analog or digital pulse compression waveforms.     

Nonlinear robust observer design for strapdown INS in-flight alignment

A nonlinear observer is proposed for a strapdown inertial navigation system (SDINS) in-flight alignment problem using an H/sub /spl infin// filter Riccati equation and a freedom parameter. The proposed observer improves the filtering stability, convergence, and performance. The characteristics of the observer are analyzed using a Lyapunov function. Simulation results demonstrate a significant reduction in alignment errors by employing the proposed nonlinear observer. The observer is developed in general such that it can be applied to estimating nonlinear systems other than the SDINS in-flight alignment.     

Likelihood-ratio detection of frequency-hopped signals

The optimum system for intercepting frequency-hopped signals uses a channelized receiver and a likelihood-ratio test (LRT). Previous results on the performance of the optimum system have been based on Gaussian assumptions, which are generally valid for transmissions having large time-bandwidth areas. Results, obtained by Monte Carlo simulation, for relatively small time-bandwidth transmissions are given here. The signal model is a simple one known as “pure frequency hopping.” Comparisons with the LRT show that energy detection loss increases when the time-bandwidth product of the transmission is increased by increasing the number of frequencies, even when the number of pulses is also increased. The loss decreases when only the number of pulses is increased. Over the parameter range observed, binary detection loss tends to increase with the number of pulses and decrease with the number of frequencies. Results are included for a moving-window version of the LRT. A parameter of the LRT is the signal-to-noise ratio (SNR). The effect of using a design value not equal to the true SNR is shown     

Sigma-mean monitoring for the local area augmentation of GPS

The local area augmentation system (LAAS) is a ground-based differential GPS system being developed to support aircraft precision approach and landing navigation with guaranteed integrity. To quantitatively appraise navigation integrity, an aircraft computes vertical and lateral protection levels using the standard deviation of pseudo-range correction errors, /spl sigma//sub pr/spl I.bar/gnd/, broadcast by the LAAS ground facility (LGF). Thus, one significant integrity risk is that the true standard deviation (sigma) of the pseudo-range correction error distribution may grow to exceed the broadcast correction error sigma or that the true mean of the correction error distribution becomes excessive during LAAS operation. This event may occur due to unexpected anomalies of GPS measurements. To insure that the true error distribution is bounded by a zero-mean Gaussian distribution with the broadcast sigma value, real-time sigma and mean monitoring is necessary. Both direct estimation and cumulative sum (CUSUM) methods are useful to detect violations with acceptable residual integrity risk. For sigma monitoring, the estimation method more rapidly detects small violations of /spl sigma//sub pr/spl I.bar/gnd/ but the fast initial response (FIR) CUSUM variant more promptly detects significant violations that would pose a larger threat to user integrity. For the purposes of mean monitoring, the FIR CUSUM variant is superior to the estimation method in detecting any mean violations. The results demonstrate that real-time protection is achievable against all sizes of sigma/mean failures that can threaten navigation integrity.     

Pulse Repetition Frequency Discriminator with Complete Harmonic Suppression

A method for selective pulse-train discrimination based on pulse repetition frequency (PRF) is presented. The technique permits acceptance of a pulse train with a desired PRF while rejecting all others, including those with pulse rates harmonically related to the desired one.     

Robust H/sub /spl infin// filtering of fuzzy dynamic systems

Robust H/sub /spl infin// filtering of complex nonlinear systems which can be represented by a fuzzy dynamic model is presented. Based on a nominal model, a common positive definite matrix P, and a piecewise continuous Lyapunov function respectively, three kinds of new filtering design methods are proposed using quadratic stability theory and linear matrix inequalities (LMIs). It is shown that the filtering system is quadratically stable with disturbance attenuation if there exists a positive definite matrix solution to a LMI or a set of LMIs. An example is also given to demonstrate the performance of the proposed filtering design methods.     

Suitability of pulse train control technique for BIFRED converter

Pulse Train/spl trade/ control scheme is presented and applied to a boost integrated flyback rectifier/energy storage dc-dc (BIFRED) converter operating in discontinuous conduction mode (DCM), which avoids the light-load high-voltage stress problem. In contrast to the conventional control techniques, the principal idea of Pulse Train technique is to regulate the output voltage using a series of high and low energy pulses generated by the current of the inductor. The applicability of the proposed technique to both the input and magnetizing inductances of BIFRED converter is investigated. Analysis of BIFRED converter operating in DCM as well as the output voltage ripple estimation is given. Experimental results on a prototype converter are also presented.     

Detection of Known Signals in Nonstationary Noise

The basic design of a nonlinear, time-invariant filter is postulated for detecting signal pulses of known shape imbedded in nonstationary noise. The noise is a sample function of a Gaussian random process whose statistics are approximately constant during the length of a signal pulse. The parameters of the filter are optimized to maximize the output signal-to-noise ratio (SNR). The resulting nonlinear filter has the interesting property of approximating the performance of an adaptive filter in that it weights each frequency band of each input pulse by a factor that depends on the instantaneous noise power spectrum present at that time. The SNR at the output of the nonlinear filter is compared to that at the output of a matched filter. The relative performance of the nonlinear system is good when the signal pulses have large time-bandwidth products and the instantaneous noise power spectrum is colored in the signal pass band.     

Thinned spectrum ultrawideband waveforms using stepped-frequencypolyphase codes

An ultrawideband (UWB) radar can interfere with external RF sources because of the mutual occupancy of the same frequency band. A stepped-frequency polyphase code (SFPC) waveform is proposed as a generic UWB waveform whose interference with the external RF sources is significantly reduced. The subpulses of the individual stepped-frequency (SF) pulses are phase coded using small phase perturbations. This results in a waveform which places nulls at the frequency locations of the external RF sources. Because the phase perturbations are small, a mismatched filter which uses the unperturbed pulses (no phase modulation) as a reference signal results in a simple receiver design and a small mismatch loss on receive. Furthermore, the proposed methodology also has application to narrowband or wideband radars