Conceptual design of near-space synthetic aperture radar for high-resolution and wide-swath imaging

Airborne synthetic aperture radar (SAR) has the capability of high-resolution, and spaceborne SAR has the capability of wide-swath. Inspired by recent advances in near-space defined as the region between 20 km and 100 km, this paper conceptually designed near-space vehicle-borne SAR. The near-space vehicle-borne SAR has the synthetical advantages of the satellite and airplane platforms. By placing SAR transmitter or receiver in near-space vehicles, many functions that are currently performed with satellites or airplanes could be performed in low cost way. These advantages make simultaneous high-resolution and wide-swath SAR imaging possible. As such, this paper focuses on the role of near-space vehicle for high-resolution and wide-swath SAR imaging, and deals with conceptual performance, as opposed to technological implementation. The concepts, models and processing algorithms are provided. To further suppress the azimuth ambiguities and extend swath width, multiple beams in azimuth is applied. Furthermore, an example near-space vehicle-borne SAR is designed. It is shown that the use of cost effective near-space vehicles can provide the solutions that were previously thought to be out of reach for remote sensing scientists and customers.     

FrFT-CSWSF:Estimating cross-range velocities of ground moving targets using multistatic synthetic aperture radar

Estimating cross-range velocity is a challenging task for space-borne synthetic aperture radar（SAR）, which is important for ground moving target indication（GMTI）. Because the velocity of a target is very small compared with that of the satellite, it is difficult to correctly estimate it using a conventional monostatic platform algorithm. To overcome this problem, a novel method employing multistatic SAR is presented in this letter. The proposed hybrid method, which is based on an extended space-time model（ESTIM） of the azimuth signal, has two steps： first, a set of finite impulse response（FIR） filter banks based on a fractional Fourier transform（FrFT） is used to separate multiple targets within a range gate; second, a cross-correlation spectrum weighted subspace fitting（CSWSF） algorithm is applied to each of the separated signals in order to estimate their respective parameters. As verified through computer simulation with the constellations of Cartwheel, Pendulum and Helix, this proposed time-frequency-subspace method effectively improves the estimation precision of the cross-range velocities of multiple targets.     

Depth of Field for SAR with Aircraft Acceleration

Processing synthetic array radar (SAR) data is difficult if the depth of field is small. Aircraft acceleration can severely reduce the depth of field and thereby increase the processing. The effects of aircraft acceleration on the depth of field for three types of SAR processing are analyzed: (1) conventional processing (range-Dopper processing), (2) variable pulse-repetition frequency (PRF) (PRF changes to compensate for aircraft acceleration), and (3) polar format. Polar format is a technique for processing high resolution SAR which has a much larger depth of field in the ground plane than conventional processing. On the other hand, aircraft acceleration will limit the vertical depth of field for polar format to about the same value as for conventional processing. In addition, for polar format, the only component of aircraft acceleration that limits the vertical depth of field is the component normal to the slant plane containing the velocity and range vectors. Vector notation is used to graphically show the effects of aircraft acceleration. In addition to better insight, the vector notation gives equations for SAR compensation that do not depend on a specific coordinate system.     

一种稳健的利用分布式小卫星获取宽域、高分辨SAR图像的方法

 传统星载合成孔径雷达(SAR)受最小天线面积条件的限制,其横向分辨率与测绘带宽度相矛盾,采用编队飞行的分布式小卫星SAR体制,可解决这一矛盾,即能够同时获得大测绘带、高分辨率的地面场景的SAR图像。主要研究如何在误差环境下抑制由小天线引入的多普勒模糊的信号处理方法。该方法利用子空间投影技术对导向矢量进行精确估计,在小卫星存在基线及其他误差时仍然能够稳健地恢复高分辨的二维SAR图像。     

Modeling and a Correlation Algorithm for Spaceborne SAR Signals

A mathematical model of a spaceborne synthetic aperture radar (SAR) response is presented. The associated SAR system performance, in terms of the resolution capability, is also discussed. The analysis of spaceborne SAR target response indicates that the SAR correlation problem is a two-dimensional one with a linear shift-variant response function. A new digital processing algorithm is proposed here in order to realize an economical digital SAR correlation system. The proposed algorithm treats the two-dimensional correlation by a combination of frequency domain fast correlation in the azimuth dimension and a time-domain convolver type of operation in the range dimension. Finally, digitally correlated SEASAT satellite SAR imagery is used in an exemplary sense to validate the SAR response model and the new digital processing technique developed.     

Performance of spaceborne bistatic synthetic aperture radar

This paper reports on a model developed for evaluating major system performance of a spaceborne bistatic synthetic aperture radar (SAR) for remote sensing applications. The procedure accounts for formation flying aspects. It is particularly aimed at comparison of monostatic and bistatic cases, and, as a test case, it is applied to study a novel configuration, based on a small satellite equipped with a receiving-only antenna orbiting in tandem with a large, noncooperative transmitting spacecraft, the Italian COSMO-SkyMed mission. Numerical results and plots show the effectiveness of the procedure as a mission design tool and put in evidence key issues and characteristics of the proposed spaceborne bistatic formation.     

Airborne along-track interferometry for GMTI

Synthetic Aperture Radar (SAR) Along-Track Interferometry (ATI) has been used extensively to measure ocean surface currents. Given its ability to measure small velocities (˜10 cmls) of relatively radar-dark water surfaces, there is great potential that this technique can be adapted for ground moving target indication (GMTI) applications, particularly as a method for detecting very slow targets with small radar cross-sections. Herein, we describe preliminary results from an ATI GMTI experiment. The SAR data described were collected by the dual-frequency NASAIJPL airborne radar in its standard dual-baseline ATI mode. The radar system imaged a variety of control targets including a pick-up truck, sport utility vehicles, passenger cars, a bicycle, and pedestrians over multiple flight passes. The control targets had horizontal velocities of less than 5 m/s. The cross-sections of the targets were not purposely enhanced, although the targets' refiectivities may have been affected by the existence of the GPS equipment used to record the targets' positions. Single-look and multiple-look interferograms processed to the full azimuth resolution were analyzed. In the data processed to date, all of the targets were observed by visual inspection in at least one of the four combinations of dual-frequency, dual-baseline interferometric data. This extremely promising result demonstrates the potential of ATI for GMTI applications.     

Digital Beamforming on Receive: Techniques and Optimization Strategies for High-Resolution Wide-Swath SAR Imaging

Synthetic Aperture Radar (SAR) is a well-proven imaging technique for remote sensing of the Earth. However, conventional SAR systems are not capable of fulfilling the increasing demands for improved spatial resolution and wider swath coverage. To overcome these inherent limitations, several innovative techniques have been suggested which employ multiple receive-apertures to gather additional information along the synthetic aperture. These digital beamforming (DBF) on receive techniques are reviewed with particular emphasis on the multi-aperture signal processing in azimuth and a multi-aperture reconstruction algorithm is presented that allows for the unambiguous recovery of the Doppler spectrum. The impact of Doppler aliasing is investigated and an analytic expression for the residual azimuth ambiguities is derived. Further, the influence of the processing on the signal-to-noise ratio (SNR) is analyzed, resulting in a pulse repetition frequency (PRF) dependent factor describing the SNR scaling of the multi-aperture beamforming network. The focus is then turned to a complete high-resolution wide-swath SAR system design example which demonstrates the intricate connection between multi-aperture azimuth processing and the system architecture. In this regard, alternative processing approaches are compared with the multi-aperture reconstruction algorithm. In a next step, optimization strategies are discussed as pattern tapering, prebeamshaping-on-receive, and modified processing algorithms. In this context, the analytic expressions for both the residual ambiguities and the SNR scaling factor are generalized to cascaded beamforming networks. The suggested techniques can moreover be extended in many ways. Examples discussed are a combination with ScanSAR burst mode operation and the transfer to multistatic sparse array configurations.     

GEO星弹双基SAR多普勒分辨率特性分析

通过对地球同步轨道（GEO）卫星运动特点的分析，阐明其对多普勒分辨率的影响。传统的双基合成孔径雷达（SAR）多普勒分辨率表达式由于不考虑雷达平台加速度矢量带来的影响，并不适用于GEO星弹双基SAR系统。根据收发平台的双曲线轨迹对目标的回波多普勒特性影响，首先利用梯度方法推导了GEO星弹双基SAR系统的多普勒分辨率表达式；随后详细地分析了GEO卫星与导弹的空间几何关系及多普勒参数，特别是加速度矢量对多普勒分辨率的影响。仿真结果验证了所推导多普勒分辨率表达式的有效性，其有助于双基SAR理论系统完整性的提高，为后续系统设计及应用实践提供理论支撑。     

GMTI along-track interferometry experiment

Synthetic aperture radar (SAR) along track interferometry (ATI) has been used extensively to measure ocean surface currents. Given its ability to measure small velocities (/spl sim/ 10 cm/s) of relatively radar-dark water surfaces, there is great potential that this technique can be adapted for ground moving target indication (GMTI) applications, particularly as a method for detecting very slow targets with small radar cross-sections. In this paper we describe preliminary results from an ATI GMTI experiment. The SAR data described herein were collected by the dual-frequency NASA/JPL airborne radar in its standard dual-baseline ATI mode. The radar system imaged a variety of control targets including a pickup truck, sport utility vehicles, passenger cars, a bicycle, and pedestrians over multiple flight passes. The control targets had horizontal velocities of less than 5 m/s. The cross-sections of the targets were not purposely enhanced, although the targets' reflectivities may have been affected by the existence of the GPS equipment used to record the targets' positions. Single-look and multiple-look interferograms processed to the full azimuth resolution were analyzed. In the data processed to date, all of the targets were observed by visual inspection in at least one of the four combinations of dual-frequency, dual-baseline interferometric data. This extremely promising result demonstrates the potential of ATI for GMTI applications.     

高信噪比、高分辨宽测绘带成像

针对传统高分辨和宽测绘带以及高信噪比和宽测绘带之间的矛盾,提出一种基于脉内扫描面阵合成孔径雷达(SAR)系统的二维空域联合处理算法实现高信噪比、高分辨宽测绘带成像。文中首先建立脉内扫描面阵SAR系统模型,该系统采用低脉冲重复频率(PRF)获得宽测绘带信息,同时利用脉内扫描方式获得高信噪比的回波信号。对于低PRF采样宽多普勒谱(对应方位高分辨)引起的多普勒模糊以及脉内扫描引起的距离模糊,提出一种二维空域联合处理算法解距离和多普勒模糊,并且详细地分析了地形高度变化对解模糊算法的影响。最后,通过仿真实验验证了本文算法的有效性。     

Coherent Doppler tomography-a technique for narrow band SAR

Some concerns regarding a technique of narrowband synthetic aperture radar (N-SAR) imaging called coherent Doppler tomography (CDT), which may be a good candidate for spaceborne applications, are addressed. Using a single-frequency signal, are addressed. Using a single-frequency signal, resolution of two tenths of a wavelength can be achieved in the point spread function if the radar platform circles the ground path to be imaged. However, the high sidelobe level of -8-dB in the point spread function results in an unacceptable dynamic range. To reduce the sidelobe level, two approaches are presented: coherent processing using multiple discrete frequencies and noncoherent subaperture processing. Simulation results demonstrate that the sidelobe level is substantially reduced by both methods. However, the resolution is degraded and the computational overhead is greatly increased for noncoherent subaperture processing. Also presented is a possible satellite geometry configuration that could utilize N-SAR processing to provide high-resolution global mapping capability     

Doppler ambiguity resolution using multiple PRF

An algorithm for velocity ambiguity resolution in coherent pulsed Doppler radar using multiple pulse repetition frequencies (PRF) is presented. It relies on the choice of particular values for the PRFs. The folded frequency of the target signal is obtained by averaging the folded frequency estimates for each PRF, and a quasi maximum likelihood criterion is maximized for ambiguity order estimation. The fast implementation of this nonambiguous estimation procedure is based on the fast Fourier transform (FFT), The proposed waveform allows full exploitation of any (even) number of PRFs, which appears to be important for estimation improvement. The effects of the waveform parameters and the folded frequency estimation variance on the performance of the ambiguity order estimation procedure are evaluated theoretically and through computer simulations. Mean square error (MSE) curves are given to assess the Doppler frequency estimation accuracy. Finally, the new method is compared with a classical technique and the implementation of the algorithm in a clutter environment is addressed.     

Road-map assisted ground moving target tracking

Tracking ground targets with airborne GMTI (ground moving target indicator) sensor measurements proves to be a challenging task due to high target density, high clutter, and low visibility. The exploitation of nonstandard background information such as road maps and terrain information is therefore highly desirable for the enhancement of track quality and track continuity. The present paper presents a Bayesian approach to incorporate such information consistently. It is particularly suited to deal with winding roads and networks of roads. The target dynamics is modeled in quasi one-dimensional road coordinates and mapped onto ground coordinates using linear road segments taking road map errors into account. The case of several intersecting roads with different characteristics, such as mean curvature, slope, or visibility, is treated within an interacting multiple model (IMM) scheme. Targets can be masked both by the clutter notch of the sensor and by terrain obstacles. Both effects are modeled using a sensor-target state dependent detection probability. The iterative filter equations are formulated within a framework of Gaussian sum approximations on the one hand and a particle filter approach on the other hand. Simulation results for single targets taken from a realistic ground scenario show strongly reduced target location errors compared with the case of neglecting road-map information. By modeling the clutter notch of the GMTI sensor, early detection of stopping targets is demonstrated     

导航星座自主导航技术--自主星历更新

自主星历更新是导航星座自主导航的关键技术之一,包括卫星轨道精密确定和轨道短时预报两个方面的内容。本文在系统地论述导航星座自主导航的信息处理流程的基础上,重点提出星座卫星轨道精密确定的自适应Kalman滤波算法。系统仿真结果表明：通过星间双向测量数据的滤波处理,能够获得高精度的卫星星历和较小的用户测距误差（URE）,满足高精度导航定位需求,初步证明导航星座自主导航信息处理流程及其星历更新算法的合理性和可行性。     

An improved imaging algorithm for spaceborne MAPs sliding spotlight SAR with high-resolution wide-swath capability

Conventional synthetic aperture radar(SAR) systems cannot achieve both highresolution and wide-swath imaging simultaneously.This problem can be mitigated by employing multiple-azimuth-phases(MAPs) technology for spaceborne sliding spotlight SAR systems.However, traditional imaging algorithms have met challenges to process the data accurately, due to range model error, MAPs data reconstruction problem, high-order cross-coupling phase error and variation of Doppler parameters along the azimuth direction.Therefore, an improved imaging algorithm is proposed for solving the above problems.Firstly, a modified hyperbolic range equation(MHRE) is proposed by introducing a cubic term into the traditional hyperbolic range equation(THRE).And two curved orbit correction methods are derived based on the proposed range model.Then, a MAPs sliding spotlight data reconstruction method is introduced, which solves the spectral aliasing problem by a de-rotation operation.Finally, high-order cross-coupling phases and variation of Doppler parameters are analyzed and the corresponding compensation methods are proposed.Simulation results for point-target scene are provided to verify the effectiveness of the proposed algorithm.     

An extended chirp scaling algorithm for spaceborne sliding spotlight synthetic aperture radar imaging

A system impulse response with low sidelobes is critical in synthetic aperture radar（SAR） images because sidelobes contribute to noise and interfere with nearby scatterers. However,the conventional tricks of sidelobe suppression are unable to be exactly applied to the case of spaceborne sliding spotlight SAR due to great azimuth shifts in both time and frequency domains. In this paper, an extended chirp scaling algorithm is presented for spaceborne sliding spotlight SAR data imaging. The proposed algorithm firstly uses the spectral analysis（SPECAN） technique to avoid the azimuth spectrum folding effect and then employs the chirp scaling（CS） algorithm to achieve data focusing, i.e., the so-called two-step approach. To suppress the sidelobe level, an efficient strategy for the azimuth spectral weighting which only involves matrix multiplications and short fast Fourier transformations（FFTs） is proposed, which is a post-process executed on the focused SAR image and particularly simple to be implemented. The SAR image processed by the proposed extended CS algorithm is very precise and perfectly phase-preserving. In the end, computer simulation results verify the analysis and confirm the validity of the proposed algorithm.     

Mitigating Range Ambiguity in High PRF Radar using Inter-Pulse Binary Coding

The paper proposes a way to increase the energy within a coherent processing interval (CPI) using more pulses instead of longer pulses. Long coded pulses result in masking targets at close range and poor Doppler tolerance. Increasing the number of pulses implies high pulse repetition frequency (PRF), which suffers from range ambiguity and target folding. These drawbacks of a high PRF can be mitigated by inter-pulse coding. The approach suggested here should be attractive for close and mid range applications of radar, ground penetrating radar, ultrasound imaging, and more.     

全球卫星导航星座网络协议体系与运行模式

针对全球卫星导航星座网络建设初期或论证阶段所涉及的网络体系结构、协议体系及相关组网等技术问题,开展了基于导航星座星间链路构建空间信息网络的技术研究,分别提出了由子网、接入网、骨干网等节点及其相互之间星间、星地无线链路构成的分层网络系统结构,设计了兼容遥控、遥测、测量与网络交互支持等业务的基于IP over CCSDS(基于空间数据系统咨询委员会标准的空间链路承载互联网协议业务)的协议体系,给出了全系统基本通信业务运行模式等。与传统高轨卫星通信系统相比,该星座网络具有高覆盖、低时延、随遇接入等优点,可实现星座导航性能与中低轨及地面用户通信性能的全方位提升,相关结果对我国全球卫星导航星座网络技术研究具有一定的参考意义。     

月球探测器天文测角/单程无线电时间差分测距/差分测速导航方法

月球探测器高精度导航技术是确保月球探测任务顺利实施的关键技术之一。当前,大多数月球探测器都是利用地面无线电进行导航和控制,但存在可测控弧段短、易受干扰等局限性,且对于月球背面探测,存在无法直接测控的不足。针对上述问题,提出了一种新的基于天文测角/单程无线电差分测距/差分测速的月球探测器组合导航方法。该方法使用了天文星光角距、探测器接收到的来自地面站或中继星的单程无线电时间差分测距和时间差分多普勒测速3种量测信息,可有效抑制星上时钟和频谱仪的时间和频率测量误差。收敛后的平均位置和速度估计误差分别为902.7 m和0.12 m/s,最大的位置和速度估计误差分别为1 548.2 m和0.24 m/s。仿真分析结果表明该方法具有较高自主导航精度。