基于SVR的X型发动机传感器故障诊断研究

利用基于回归型支持向量机(SVR)的诊断方法,设计了某型涡扇发动机传感器常见故障诊断系统,实现了传感器故障隔离与信号重构.通过发动机试车数据对SVR进行训练,以传感器的偏置故障、冲击故障和漂移故障为例,用MATLAB语言进行了计算机仿真验证.结果表明:基于SVR的传感器故障诊断具有精确度高,实时性强的特点,是一种很好的传感器故障诊断方法.      

航空发动机燃油系统执行机构故障诊断及验证

研究了基于执行机构模型以及发动机逆模型的发动机燃油系统执行机构及其传感器故障诊断方法.基于发动机半物理仿真试验台试验数据建立执行机构小闭环传递函数模型,通过二次多项式拟合将油针位置转换为燃油流量.提出基于自校正在线训练神经网络算法建立发动机逆模型,以离线训练网络参数初始化在线系统,基于阈值更新网络参数,并对学习速率进行自校正,以提高算法的泛化能力及收敛速度.对比执行机构模型输出、发动机逆模型输出与LVDT传感器测量位移换算得到的燃油流量,基于阈值判断故障状态.在T700涡轴发动机半物理仿真试验平台上进行试验,实现了在发动机额定及各种性能退化状态下,执行机构及其传感器漂移和偏置故障的准确诊断及定位,验证了算法的有效性.     

模型基涡轴发动机传感器故障诊断研究

基于干扰解耦思想,针对涡轴发动机工作中传感器瞬时断路硬故障模式,提出一种基于模型的涡轴发动机未知输入观测器传感器硬故障诊断方法。通过对地面、高空工作的涡轴发动机不同传感器故障的模拟,验证了该故障诊断方法的有效性。结果表明,基于模型设计的未知输入观测器(UIO),能够对系统输入中的测量干扰未知输入信号进行有效解耦,同时传感器故障信息通过UIO计算获得的输出估计具有鲁捧残差性能。     

基于滑动时间窗主成分分析的液体火箭发动机传感器故障诊断方法

安装在发动机上的各种传感器是发动机状态监测的主要依据,由于工作环境恶劣,传感器失效时有发生。由于发动机运行过程中的性能蜕变和台次差异,现有基于主成分分析（PCA）的传感器故障隔离方法应用条件苛刻且诊断效果有限。针对这些问题,在对发动机数据分析的基础上,将滑动时间窗方法与PCA方法结合,提出双滑动时间窗的PCA方法用于故障传感器的隔离,并基于发动机试车数据进行了方法验证。结果表明：该方法能降低发动机性能蜕变和台次差异对发动机传感器故障诊断的影响,没有参数相关性的限制,可以实现对四种常见传感器故障的有效隔离,以及对两种发动机试验过程中故障的准确检测。研究证明了高速运转系统性能蜕变和强耦合复杂大系统台次差异对基于数据的故障诊断方法效果的影响,验证了在线学习/训练算法对这两种现象的鲁棒性。     

基于任意传感器排布的叶尖定时信号压缩感知辨识方法

基于叶片振动和叶尖计时系统的特点,推导了任意传感器角度分布下叶片振动响应的分布规律,并基于叶尖定时信号频域的稀疏性,探究了压缩感知方法在叶尖定时信号的重构和倍频辨识上的应用。通过同步信号和非同步信号的大量数值实验,分析了包括信号重构误差、传感器数量、旋转周期数、频率分辨率和信噪比等因素对辨识效果的影响,提出了压缩感知重构叶尖定时信号的基本方法和步骤。进一步将压缩感知方法应用于某型号涡扇发动机钛合金宽弦风扇叶片有限元仿真获得的振动响应数据重构,验证了该方法的有效性。结果表明:在加入了叶尖测点位置误差和30 dB随机噪声的前提下,在80%、90%和100%三种转速工况下均清晰辨识出幅值较大的激励倍频。基于任意传感器角度分布的压缩感知方法对叶尖定时信号辨识效果较好。     

民用航空发动机传感器信号重构方法及其应用

以转速传感器为例,研究了基于信号合成的航空发动机高精度的传感器信号重构方法.针对民用大涵道比涡扇发动机,分析选取了用于转速传感器信号合成的参数,完成了传感器信号全包线稳态合成和动态补偿的原理分析及设计.利用发动机控制系统全数字仿真平台,对信号合成的结果进行了仿真测试.结果显示:转速合成信号的稳态误差不超过1%,动态误差不超过3%,表明该传感器信号重构方法具有高精度.      

基于GA-AANN神经网络的SDQ算法的航空发动机传感器数据预处理

为实现对输入健康管理系统的航空发动机传感器数据进行数据鉴定、故障诊断以及去除噪声信号干扰,提出了一种航空发动机传感器数据预处理方法。针对双通道传感器航空涡扇发动机,搭建了以合理性检验模块和解析冗余检验模块为主要内容的SDQ算法模型,利用遗传算法优化的AANN神经网络实现传感器的解析冗余检验。采用蒙特卡罗仿真方法,将改进的SDQ算法与一种基于最小二乘法的SDQ算法进行对比仿真验证。结果表明,本文提出的SDQ算法在发动机稳态条件下对阶跃故障和漂移故障隔离的平均正确率分别提高了1.7%和19.1%,在发动机动态条件下对阶跃故障和漂移故障隔离的平均正确率分别提高了12.5%和33.8%。且在多传感器故障诊断和除噪方面性能优异,处理后的传感器信号平均信噪比提高了8.27dB。     

智能燃油计量装置故障诊断算法研究

在分布式控制系统框架下,为完善智能装置功能,以某型民用发动机燃油系统为研究对象,将其关键部件燃油计量装置作为一个智能装置节点,基于SDQ-ARMA系统算法进行位移传感器数据确认与故障诊断,并针对其计量活门的静摩擦力增大的特定性能衰退模式,在提取燃油系统传感器的时域特征的基础上,构建了基于SVM的故障检测算法流程,对燃油系统联合仿真模型进行验证,仿真实例中,故障诊断算法软硬件仿真一致,表明研究算法具有实时性,可为智能装置算法开发提供参考。     

基于核主元分析方法的燃气涡轮发动机燃烧系统实时监测与诊断

针对燃气涡轮发动机燃烧室状态监测方法不足,故障定位难和故障早期发现难的问题,以涡轮排气温度场周向数据为分析依据,通过研究燃气在涡轮通流部分的偏转规律,利用核主元分析(KPCA)方法对经过有效性处理后的温度场数据进行分析,并结合两台发动机的故障数据,分别对燃烧系统自身故障和热电偶传感器故障进行检测与识别,验证了排气温度场燃气偏转规律与核主元分析相结合的方法对燃烧系统故障和传感器故障进行诊断的有效性.结果表明:该方法能够将安装了环管式分布火焰筒的燃气涡轮发动机燃烧室的故障诊断定位层次从目前的燃烧室这个大部件提高到火焰筒级别的小部件.      

分布式光纤传感器在发动机状态监控中的应用

提出了基于分布式光纤传感器的飞机发动机状态监控系统的设计方案,并给出多传感器数据融合结构及其实现方法。     

Multisensor covariance control strategies for reducing bias effects in interacting target scenarios

Algorithms are presented for managing sensor information to reduce the effects of bias when tracking interacting targets. When targets are close enough together that their measurement validation gates overlap, the measurement from one target can be confused with another. Data association algorithms such as the joint probabilistic data association (JPDA) algorithm can effectively continue to track targets under these conditions, but the target estimates may become biased. A modification of the covariance control approach for sensor management can reduce this effect. Sensors are chosen based on their ability to reduce the extent of measurement gate overlap as judged by a set of heuristic parameters derived in this work. Monte Carlo simulation results show that these are effective methods of reducing target estimate bias in the JPDA algorithm when targets are close together. An analysis of the computational demands of these algorithms shows that while they are computationally demanding, they are not prohibitively so.     

基于SPSO-SVR的融合航空发动机传感器故障诊断

针对航空发动机常见的传感器故障问题, 提出了一种利用改进的粒子群算法训练支持向量回归机, 并利用融合机制将其应用于传感器故障诊断.论述了用一簇支持向量回归机(SVR)预测器对传感器进行实时检测, 通过逻辑判断机制隔离故障传感器, 并且依据剩余的无故障传感器信息实现信号重构.以某型航空发动机传感器在其整个工作范围内受到的冲击、偏置和漂移故障为例, 验证了基于自协调粒子群优化支持向量回归机(SPSO-SVR)算法的融合诊断机制对传感器单一故障和多重故障具有较高的精度和计算效率.      

中值滤波方法在燃气涡轮传感器数据校正中的应用研究

分析了发动机测量信号滤波需求,设计了针对传感器数据校正的中值滤波器和快速算法,给出了模拟发动机故障和变工况试验情况下的传感器输出,给出了滤波比较研究结果。数值实验和实际应用于涡轮试验测量数据滤波的结果表明,中值滤波器对于脉冲噪声可以完全剔除,对随机噪声也具有较好的抑制效果,并能够较好保持信号中的陡峭边沿等趋势成份。      

Bayesian Approach to Extended Object and Cluster Tracking using Random Matrices

In algorithms for tracking and sensor data fusion the targets to be observed are usually considered as point source objects; i.e., compared with the sensor resolution their extension is neglected. Due to the increasing resolution capabilities of modern sensors, however, this assumption is often no longer valid as different scattering centers of an object can cause distinct detections when passing the signal processing chain. Examples of extended targets are found in short-range applications (littoral surveillance, autonomous weapons, or robotics). A collectively moving target group can also be considered as an extended target. This point of view is the more appropriate, the smaller the mutual distances between the individual targets are. Due to the resulting data association and resolution conflicts any attempt of tracking the individual objects within the group seems to be no longer reasonable. With simulated sensor data produced by a partly unresolvable aircraft formation the addressed phenomena are illustrated and an approximate Bayesian solution to the resulting tracking problem is proposed. Ellipsoidal object extensions are modeled by random matrices, which are treated as additional state variables to be estimated or tracked. We expect that the resulting tracking algorithms are also relevant for tracking large, collectively moving target swarms.     

Vortex sensor of aerodynamic angle and true airspeed

In this paper, we describe some principles of construction, algorithms for data processing, and a functional scheme of the vortex sensor for aerodynamic angles and true airspeed measurements in subsonic flight vehicles. Also presented are some relations for determining the ranges of measurements and indicated errors of this sensor and its design peculiarities and advantages are considered.     

Star recognition algorithm for APS star tracker: oriented triangles

An efficient star pattern recognition algorithm is presented. The purpose of this algorithm is to make sure of the compatibility of the software and the imaging sensor noise level. The new CMOS APS sensors have not currently reached the same accuracy as the former CCD sensors in position as well as in magnitude determination, especially in the dynamic stages. This algorithm allows the system to recognize the star pattern 20% faster than with reference algorithms. No false recognition has been noticed. Used databases have a size 5 to 10 times smaller, depending on other reference algorithms. Oriented triangles are used to compare the measured star pattern with the catalogue stars. The triangle's characterization criteria propose several solutions in a first time. A unique solution is selected by means of identification and validation methods in a second time. First results, presented hereinafter, are very encouraging, and this algorithm may be used in the future APS star trackers. APS star tracker robustness is significantly enhanced by this method during the critical navigation phases     

分布式无源传感器系统多目标跟踪算法

研究了分布式无源多传感器系统多目标跟踪问题,在只有测向信息可以利用的情况下,分布式系统首先利用波门技术分别对各个无源传感器角度测量数据进行关联配对和滤波;然后,将处理结果送到融合中心,在融合中心通过构造的χ2分布检验统计量进行多目标方位航迹的关联;最后,通过交叉定位和位置信息融合获得多个目标的位置信息估计,实现无源多目标跟踪。论文通过仿真分析对算法的有效性和可行性进行了验证。     

永磁同步电机霍尔位置传感器自标定算法研究

为提高采用霍尔位置传感器的永磁同步电机控制效率,解决标定精度低的问题,提出了两种自标定算法。对提出的霍尔位置传感器自标定算法进行了建模仿真和算法编程验证,将标定后的霍尔传感器得到的转子位置与通过旋转变压器测得结果对比,验证两种自标定算法的准确性。结果表明,所提的霍尔位置传感器位置自标定方法既可以提高标定效率,也可提高获取转子位置的准确度,为实现电机的精准高效控制提供保障。     

Nonparametric methods for clutter removal

Methods of clutter rejection are discussed which furnish an inherent counterpart of target tracking and detection algorithms. We describe how nonparametric curve estimation methods reduce the original sensor data to a “signal-plus-noise” model which is well suited for various hypotheses testing and dynamical filtering algorithms. We also verify a “white noise” assumption for the model of residuals