多滤波器并联方式解决直升机动力传动链扭振耦合

为了解决直升机动力传动链扭振系统与动力控制系统的耦合不稳定性问题,提出了一种采用多个陷波滤波器并联组合、根据发动机不同的工作模态选择不同滤波器实现扭振滤波的方法。对陷波滤波器进行了改进,使得引入控制系统通频带的附加相移减小,降低了对系统控制性能的影响。通过直升机联合试验,验证了该方法是有效的。      

基于apFFT的罗兰-C窄带干扰频域抑制方法

针对现有罗兰-C接收机普遍采用固定陷波电路抑制窄带干扰的情况,提出了基于全相位谱分析(apFFT)的频域精确自适应陷波罗兰-C窄带干扰抑制方法,设计了基于双相移组合全相位法的FIR频域陷波器。在对窄带干扰进行精确谱分析的基础上,设计相应频点的陷波器对多个窄带干扰进行抑制。基于MATLAB的仿真结果表明:该方法能够根据罗兰-C窄带干扰频率的变化,实现频点任意控制的频域自适应陷波,有效恢复出罗兰-C信号,为增强型罗兰-C接收机的设计提供了一种简单有效的窄带干扰抑制方法。     

Poly-phase codes and optimal filters for multiple user ranging

A technique is introduced to select poly-phase codes and optimal filters of a pulse compression system that have specific temporal and frequency characteristics. In the particular problem under study, multiple vehicles are assigned unique codes and receiver filters that have nearly orthogonal signatures. Narrowband users, that act as interference, are also present within the system. A code selection algorithm is used to select codes which have low autocorrelation sidelobes and low cross correlation peaks. Optimal mismatched filters are designed for these codes which minimize the peak values in the autocorrelation and the cross correlation functions. An adjustment to the filter design technique produces filters with nulls in their frequency response, in addition to having low correlation peaks. The method produces good codes and filters for a four-user system with length 34 four-phase codes. There is considerable improvement in cross and autocorrelation sidelobe levels over the matched filter case with only a slight decrease in the signal-to-noise ratio (SNR) of the system. The mismatched filter design also allows the design of frequency nulls at any frequency with arbitrary null attenuation, null width, and sidelobe level, at the cost of a slight decrease in processing gain     

Code Division Multiplexing by Frequency Shifted Biphase Modulated M-Sequences

A new set of frequency shifted biphase modulated PN sequence signals is introduced, and it is shown that for a set of length N the cross mutual interference is bounded by (N + 1)/N2. This subject is related to the so-called near/far problem of directsequence encoded code division multiplexing networks.     

DME Interference mitigation for L-DACS1 based on system identification and sparse representation

L-band digital aeronautical communication system 1 (L-DACS1) is a promising candi-date data-link for future air-ground communication, but it is severely interfered by the pulse pairs (PPs) generated by distance measure equipment. A novel PP mitigation approach is proposed in this paper. Firstly, a deformed PP detection (DPPD) method that combines a filter bank, correlation detection, and rescanning is proposed to detect the deformed PPs (DPPs) which are caused by mul-tiple filters in the receiver. Secondly, a finite impulse response (FIR) model is used to approximate the overall characteristic of filters, and then the waveform of DPP can be acquired by the original waveform of PP and the FIR model. Finally, sparse representation is used to estimate the position and amplitude of each DPP, and then reconstruct each DPP. The reconstructed DPPs will be sub-tracted from the contaminated signal to mitigate interference. Numerical experiments show that the bit error rate performance of our approach is about 5 dB better than that of recent works and is closer to interference-free environment.     

扩频系统中伪码防错锁技术研究

针对扩频系统中出现的伪码错锁问题,分析了产生伪码错锁的原因,根据伪码自相关性和互相关性特点,从伪码捕获策略、错锁自动判决策略等角度研究了伪码防错锁措施：选择自相关性和互相关性尽可能好的码;合理设置捕获门限;减小多普勒捕获范围;采用并行伪码捕获方法,并在捕获过程中防止载波错捕现象发生;单独建立验证通道,进行相关值比较判决等。实践表明,采用文中方法可提高正确捕获概率,缩短捕获时间,从硬件设计上有效解决了伪码错锁问题。     

Survey of High-Power Microwave Filters

A summary of research and development work on high-power microwave filters is given here: first, design considerations in high-power microwave filters?power handling capacity, waveform distortion, multimode suppression, and stop and pass band characteristics; second, a discussion of filtering devices and techniques in two broad categories-dominant mode filters and harmonic filters (discussion covers methods of operation and significant characteristics of each filter developed to date); and third, a discussion of applications and limitations of filters in various systems and interference situations. Also included are the availability, cost, size, weight, etc. as functions of frequency for the various filter types.     

基于QR分解最小二乘算法消除ECG中工频干扰

研究了一种基于QR分解最小二乘(QRD-LS)算法消除ECG中工频干扰的方法,此方法采用基于数据域处理的QRD-LS算法进行权值的训练和更新,其直接针对输入数据矩阵进行递推,且可用并行Systolic处理结构高效地实现。并且能自适应消除工频干扰,提高信干比,仿真结果验证了理论。     

Acquisition of Pseudonoise Codes in FH Systems

Acquisition schemes for acquiring pseudonoise (PN) signals in a frequency hopping (FH), spread spectrum (SS) system are presented. For the purpose of acquiring the PN code the received signal is modeled by an autoregressive (AR) process. The parameters of the AR process are determined by identifying a related set of parameters called the partial correlation coefficients. The power spectrum of the received signal and hence the PN code is estimated from the identified AR parameters. The high accuracy of the estimated PN codes permits the use of a simple error correcting logic to accelerate the acquisition process.     

A minimax approach to the design of Doppler filters

The detection of a target in correlated clutter, thermal noise, and extraneous interference is considered. The amplitude, phase and Doppler frequency of the signal are not known a priori. A general criterion is presented which measures the performance of a suboptimal test relative to an optimal test. The criterion is encompassed into a design procedure used to design Doppler filters. The procedure allows many design considerations to be taken into account, and results in a design which attempts to minimize the number of filters required. For low dimensionality the procedure results in single filter designs; for higher dimensionality multiple filters are designed. The performances of these systems are compared with the results obtained by Emerson (1978) and Andrews (1974). It is found that the procedure yields good filter designs under general conditions and may reduce the number of filters required compared with classical designs     

A new algorithm to optimize Barker code sidelobe suppressionfilters

The authors suggest a new algorithm for binary coding waveform sidelobe reduction after matched filtering and present a general method by which optimized sidelobe suppression filters for Barker codes can be obtained with a peak output sidelobe 2.62 dB lower than the results found in the literature (for 13-b Barker code). This optimization algorithm is also promising for other binary coding waveforms, such as truncated pseudonoise (PN) sequences and concatenated codes. This new approach can readily be applied to sidelobe-reduction filter design for other binary coding waveforms, such as truncated PN sequences, concatenated codes, etc., which often find their applications in radar systems and spread spectrum communication systems     

调频引信中噪声调幅干扰的自适应抑制

噪声调幅干扰是一种有效的压制性干扰,可压制近炸无线电引信对目标信息的获取。为提高线性调频无线电引信抗噪声调幅干扰的能力,将单频率自适应陷波器应用到线性调频引信中,对噪声调幅干扰进行抑制。分析了噪声调幅干扰抑制原理,并对噪声调幅干扰抑制效果进行了仿真。仿真结果表明:SJB=-10 d B时,仍然能达到很好的噪声调幅干扰抑制效果。     

Dual Speed PN Ranging System for Tracking of Deep Space Probes

A new pseudonoise (PN) ranging system is proposed for trackingof deep space probes, named the dual speed PN ranging system,that transmits two different PN sequences simultaneously through a PSK/PSK (phase-shift keying) dual speed communication channel.The dual speed PN ranging system improves the maximummeasurable range significantly, with no degradation of theacquisition time, when compared with usual PN ranging systems.According to the analysis, the tracking error of this system becomesas small as those of usual PN ranging systems when the inputsignal-to-noise ratio (SNR) is large enough.     

Enhanced motion and sizing of bank in moving-bank MMAE

The focus of this research is to provide methods for generating precise parameter estimates in the face of potentially significant parameter variations such as system component failures. The standard multiple model adaptive estimation (MMAE) algorithm uses a bank of Kalman filters, each based on a different model of the system. Parameter discretization within the MMAE refers to selection of the parameter values assumed by the elemental Kalman filters, and dynamically redeclaring such discretization yields a moving-bank MMAE. A new online parameter discretization method is developed based on the probabilities associated with the generalized chi-squared random variables formed by residual information from the elemental Kalman filters within the MMAE. This new algorithm is validated through computer simulation of an aircraft navigation system subjected to interference/jamming while attempting a successful precision landing of the aircraft.     

New approach for suppression of FM jamming in GPS receivers

A new approach is proposed for the suppression of FM jammers in C/A code GPS receivers. This approach is based on the cascading of the augmented-state approximate conditional mean (ASACM) filter and the discrete wavelet transform (DWT) filter. An ASACM filter for single interference suppression in spread-spectrum systems has been reported in the recent literature. However, the formulation of the ASACM filter and its performance analysis is lacking in the case of suppression of multiple FM interferences. The ASACM filter is formulated here for the suppression of multiple FM jammers. Further, a DWT filter using biorthogonal wavelet is suggested for the suppression of FM jammers. Finally, these two filters are cascaded to get an optimum performance for higher jammer to signal ratio, which is of importance in the GPS, for the case of suppression of multiple FM jammers. The performance of the proposed filters is analyzed through simulation examples for the suppression of single and multiple FM jammers in GPS receivers     

基于自适应滤波的引信噪声调幅干扰抑制

噪声调幅干扰是一种有效的压制性干扰,可压制近炸无线电引信对目标信息的获取。为提高连续波多普勒无线电引信抗噪声调幅干扰的能力,将单频率自适应陷波器应用到连续波多普勒引信中,对噪声调幅干扰进行抑制。分析了噪声干扰抑制原理,并对噪声干扰抑制效果进行了仿真。仿真结果表明：SJR=-10dB时,仍然能达到很好的噪声调幅干扰抑制效果。     

Generalized linear solution of proportional navigation

Proportional navigation (PN) equations are not solvable in closed form. Linearized solutions have been widely used for PN system analysis and design, but these are based on overly restrictive assumptions regarding the initial geometry, and are valid only for near-tail-chase pursuits. A generalization of the linearized approach is presented which yields more-accurate estimates of pursuer lateral acceleration than the classical linear solutions as verified by comparison with `exact' numerical solutions. Further, the solution is applicable over a much wider range of engagement geometries. The treatment is based on a closed-form quasilinearized solution of the PN equations followed by the small-angle approximation only to line-of-sight (LOS) angle rate     

扩频应答机码跟踪环的一种实现方法

讨论了一种伪随机码跟踪环的特性，分析了码相关间隔、预检积分时间、环路带宽及信噪比等参数对码跟踪性能的影响。该方案不仅能够对PN码相位的变化作出调整，同时对PN码多普勒进行跟踪，较适合于测控应答机中PN码跟踪环的应用。     

发动机性能量与输入量的相关性研究

展开了相关性研究，讨论了一种相关性分析的算法，并在此基础上进行了大量的数字仿真实验，结果表明通过相关性分析不但可减少计算工作量，而且即使在传感器有限的情况下，模型也可很好的跟踪发动机，两者的匹配效果较好     

干扰环境下直扩系统中DMF捕获性能研究

基于数字匹配滤波器(DMF)的捕获电路具有较快的捕获速度,因此它在直扩系统(DSSS)中得到了广泛的应用。为了在干扰环境下进一步提高其捕获性能,本文对影响捕获性能的检测概率和虚警概率进行了分析;并对直扩系统中基于DMF的平均捕获时间进行了计算机仿真,从而找到了在平均捕获时间较小时应该满足的信干比、干噪比和判决门限,为改善直扩系统的捕获性能提供了理论依据。