考虑执行机构饱和的迎角跟踪控制

设计提出了 1种针对高光谱图像分类任务的 3D-MSCNN模型。在 PCA降维的基础上,利用 3D空谱特征提取网络和 2D多尺度特征提取网络实现高光谱图像特征提取,充分发挥高光谱图像空谱信息价值,增强对不同尺度地表覆盖的表达能力。最后,利用 Softmax分类损失函数实现高光谱图像分类任务。实验结果表明,本文算法在 In. dian Pines和 Pavia University数据集上都取得了较好的分类效果。与 CD-CNN、3D-CNN、SS-Net和 HybirdSN等方法相比,本文算法能够有效提升总体精度、平均精度和 Kappa系数等客观评价指标。     

Modeling and analysis for the GPS pseudo-range observable

In this paper, a digital system for the Global Positioning System (GPS) pseudo-range observable is modeled and analyzed theoretically. The observable is measured in a GPS receiver by accurately tracking the pseudorandom noise (PRN) code phase of the input GPS signal using a digital energy detector and a digital delay lock loop (DDLL). The following issues are presented: (1) mathematical modeling of the digital PRN code acquisition and tracking system, (2) the closed-form expression derivation for the detection and false-alarm probabilities of the acquisition process and for the variance of code phase tracking error, and (3) the linear and nonlinear performance analysis of the DDLL for optimizing the receiver structures and parameters with tradeoff between the tracking errors due to receiver dynamics and due to input noise     

BOC信号的相关跟踪研究及GALILEO接收机设计初探

Galileo卫星导航系统是欧盟组织研发的新一代完全面向民用的卫星导航系统,使用了BOC(二进制副载波)这一独特的调制方式,研究BOC信号的相关峰特性,对设计接收机捕获跟踪通道是至关重要的。本文简要介绍了Galileo系统导航信号的特征和频率规划,对多种BOC信号的自相关性能、码跟踪方法进行了仿真,并探讨了接收机开发中的关键问题。     

Performance analysis of GPS carrier phase observable

The accuracy analysis of Global Positioning System (GPS) carrier phase observable measured by a digital GPS receiver is presented. A digital phase-locked loop (DPLL) is modeled to extract the carrier phase of the received signal after a pseudorandom noise (PRN) code synchronization system despreads the received PRN coded signal. Based on phase noise characteristics of the input signal, the following performance of the first, second, and third-order DPLLs is analyzed mathematically: (1) loop stability and transient process; (2) steady-state probability density function (pdf), mean and variance of phase tracking error; (3) carrier phase acquisition performance; and (4) mean time to the first cycle-slipping. The theoretical analysis is verified by Monte Carlo computer simulations. The analysis of the dependency of the phase input noise and receiver design parameters provides with an important reference in designing the carrier phase synchronization system for high accuracy GPS positioning     

The White Sands Range and Range-Rate System

This paper discusses the concept, design, and design verification of the White Sands Range and Range-Rate System. Development of the system has been completed only through the design phase. The system is designed to meet requirements for high-accuracy midcourse tracking under severe target dynamics at the White Sands Missile Range. It is a multistatic Doppler and range tracker which operates at X band and incorporates transmitter, transponder, receiver, and baseline subsystems. The transmitter includes specially designed digital circuitry to synthesize test signals for target simulation during checkout of the system. The transponder signal is processed by a receiver which has been established theoretically to be the optimum realizable processor of continuous tracking data. The receiver incorporates specially designed carrier acquisition circuitry and digital VCO, and directly provides digital Doppler and tone phase data to facilitate real-time processing. The system utilizes data from other tracking systems at the Range for spatial acquisition, for aiding carrier acquisition in the receiver, and for resolving range ambiguities.     

DS/FH混合扩频测速技术研究

由于DS/FH混合扩频信号带宽较宽,传输信道难以保证信号在宽带条件下线性传输,信号会发生群时延畸变,导致载波相位不再连续,影响载波的稳定跟踪,从而使测速精度降低。本文提出了基于跳频图案同步辅助的鉴频方案,可以消除相位跳变对载波跟踪的影响,实现对扩跳信号载波的稳定跟踪,从而提高DS/FH混合扩频测速的精度。     

一种基于TDDM裂谱信号的解模糊位搜索法

时分数据调制(TDDM)裂谱信号作为一种新调制信号,具有独有的电文翻转位模糊特性,导致了采用通常的搜索方法无法正确输出电文的现象。针对TDDM裂谱信号特性以及现有搜索方法的不足,提出了一种解模糊位搜索法。该方法主要分为合路快捕及解模糊位判决两个阶段。其合路快捕阶段,不但可以快速缩小搜索范围,而且可以避免由扩频方式而引起的漏捕现象;解模糊位判决阶段,可以去除电文翻转位的模糊度,正确输出电文的翻转位置。在理论推导的基础上,从性能及信噪比容限角度进行了仿真测试,测试结果表明,解模糊位搜索法对TDDM裂谱信号的电文翻转位判决精度可以达到100%。     

一种针对结构损伤的非线性容错飞行控制方法

飞机结构损伤会引起气动参数变化,进而影响系统的静稳定性和控制精度。针对具有多输入的非线性飞机模型,利用带有二阶命令滤波器的自适应反步控制方法在线估计飞机气动参数,补偿结构损伤导致的气动参数变化对控制系统的影响,以实现容错飞行控制功能;引入的命令滤波器可以避免反步控制中复杂的求导运算。从理论上分析证明了带有二阶命令滤波器的自适应反步控制的闭环系统稳定性,并给出了控制跟踪误差的理论上界和二阶命令滤波器频率参数选取的下界。通过一个大型客机垂直尾翼脱落场景的仿真实验,验证了所提容错控制方法的有效性。     

Tracking and data acquisition for space exploration

The tracking and data acquisition systems provide the key link between the remote spacecraft and the scientific experimenter on the ground. The operation of the space experiment takes place through the links of command, telemetry and tracking. The evolution from the early very simple spacecraft missions toward more complex and sophisticated missions has been paralleled by a similar evolution in the tracking and data acquisition systems. The early Minitrack interferometer tracking system still carries the major tracking workload for space missions; however greater tracking accuracy requirements for more recent missions, such as the Orbiting Geophysical Observatory and the Apollo mission, have brought about the development of unified tracking and data acquisition systems which utilize hybrid pseudo-random code/sidetone ranging techniques. The data acquisition has evolved from analog telemetry systems to the present day heavy use of PCM digital telemetry. Likewise the command systems have evolved from early simple on/off command systems into PCM digital command data systems. The trend is toward greater real time control of more complex functions on board the spacecraft. Newer spacecraft are incorporating computer-type systems in the spacecraft which require programming and memory load through the ground command link. The most attractive concept for the next generation network for tracking and data acquisition is a network consisting of synchronous-orbit Tracking and Data Relay Satellites for covering launches and low-orbit earth satellites plus a few selected ground stations for supporting spacecraft in high earth orbit and lunar orbit.     

基于鉴相器的矢量跟踪环设计

基于鉴相器的矢量跟踪环是锁定导航卫星码和载波的一种跟踪算法,这种算法适合于在弱信号环境下进行跟踪。矢量环不仅充分利用信号跟踪和导航状态解算之间的内在耦合关系,而且每一通道中采用鉴相器和锁频环结合的方式,系统一步内完成信号跟踪和导航解算任务。反馈控制量NCO是由导航滤波器和环路内部滤波器共同产生。实验表明,矢量跟踪环具有快速重捕获特性,能够在弱信号的环境下运行,比起传统环路有更小的跟踪误差。     

Application of successive interference cancellation to the GPS pseudolite near-far problem

Ground-based transmitters called pseudolites have been proposed to augment the basic Global Positioning System (GPS) in environments where satellite visibility is limited. One difficulty in their use is the so-called near-far problem, where in close proximity to the ground transmitter, the pseudolite signal can be orders of magnitude stronger than the satellite signals. This large range of signal levels prevents a conventional receiver from simultaneously detecting both types of signals. This paper describes the application of a signal processing technique, known as successive interference cancellation (SIC), to the acquisition and tracking of weak satellite signals in the presence of a nearby pseudolite and possible multipath reflections of this pseudolite signal. The SIC architecture is implemented on simulated and experimental near-far data sets. The results are compared with a conventional detector and improvements in acquisition and tracking performance are illustrated.     

Frequency Tracking Characteristics of Split-Loop Phase-Locked Receivers

The excess time delay introduced by the incorporation of the intermediate frequency (IF) stage within the phase-locked loop (PLL) causes serious deterioration in the acquisition and tracking performance of the loop. The split-loop phase-locked system suggested by McGeehan and Sladen considerably reduces the effect of time delay on the acquisition and tracking performance of the loop. The frequency acquisition characteristics of the split-loop phase-locked receiver is investigated, and the effect of possible asymmetry in the arms of the loop on the acquisition range is examined. Closed-form approximate formulas are derived, and a comparison between split-, long-, and short-loop acquisition performance is presented.     

气动舵面/RCS复合控制系统构型设计与仿真

针对空天飞行器再入段异构执行机构复合控制问题,基于气动舵面和反作用推力器的特性,提出了适用于空天飞行器的3种气动舵面与反作用控制系统的复合控制构型：指令型、力矩型、指令误差型,以及相应的控制律设计方法,在此基础上完成空天飞行器再入段的控制系统设计。仿真结果表明,3种构型的复合控制系统均能满足指令跟踪性能要求,其中指令型复合控制系统气动舵工作最为平稳,推力器开启频次最少。从工程应用的角度出发,指令型复合控制系统的综合性能最为理想。     

Sliding mode and shaped input vibration control of flexible systems

In this paper, the vibration reduction problem is investigated for a flexible spacecraft during attitude maneuvering. A new control strategy is proposed, which integrates both the command input shaping and the sliding mode output feedback control (SMOFC) techniques. Specifically, the input shaper is designed for the reference model and implemented outside of the feedback loop in order to achieve the exact elimination of the residual vibration by modifying the existing command. The feedback controller, on the other hand, is designed based on the SMOFC such that the closed-loop system behaves like the reference model with input shaper, where the residual vibrations are eliminated in the presence of parametric uncertainties and external disturbances. An attractive feature of this SMOFC algorithm is that the parametric uncertainties or external disturbances of the system do not need to satisfy the so-called matching conditions or invariance conditions provided that certain bounds are known. In addition, a smoothed hyperbolic tangent function is introduced to eliminate the chattering phenomenon. Compared with the conventional methods, the proposed scheme guarantees not only the stability of the closed-loop system, but also the good performance as well as the robustness. Simulation results for the spacecraft model show that the precise attitudes control and vibration suppression are successfully achieved.     

On the Acquisition Time for an Apollo Ranging Code

An Apollo ranging system is considered whose phase reference is obtained by a phase-locked loop for bit synchronization. The bit phase reference is noisy, and the error probability for the ranging code is shown to depend on the input signal energy per bit to noise density ratio. The procedure of computing the acquisition time for the ranging code is then presented and the acquisition time for a lunar ranging code is plotted versus the input signal-to-noise density ratio.     

涡扇发动机自适应加减速控制研究

针对涡扇发动机加减速过程特性参数变化大的不确定系统,提出一种带执行机构的涡扇发动机自适应加减速伺服控制设计方法。采用变阻尼修正的自适应控制规律,抑制了自适应加减速过程中的参数漂移。在自适应加减速控制算法中,设计目标是使被控对象的输出能够伺服跟踪任意加减速指令信号,这一指令与涡扇发动机加减速过程中对带有条件限制的指令要求一致,为使控制系统具有加减速伺服跟踪和对外界扰动信号抑制的能力,在控制回路中内嵌积分环节,实现闭环加速伺服跟踪鲁棒性能,结果表明:自适应控制适用于涡扇发动机过渡态控制。在仿真时,在系统中加入白噪声干扰的情况下,自适应参数被限制在±0.003的范围内,没有出现参数漂移现象;在快速加减速过程中,加减速燃油流量未出现大幅超调和下垂,加减速时间不超过4 s。     

高精度液压仿真转台鲁棒控制

 针对液压仿真转台具有时变不确定性、复杂外干扰等特点和高精度控制性能要求,提出了一种鲁棒复合控制结构,该结构由鲁棒内回路补偿器、外回路反馈控制器和输入信号前馈补偿器三部分组成。其中,鲁棒内回路补偿器用来抑制外干扰和时变不确定性的影响,外回路反馈控制器的作用是保证闭环系统的整体性能,输入信号前馈补偿器实现对系统动态时滞的补偿,以保证对参考信号的精确跟踪。以某型液压仿真转台内环为例,首先根据所提出控制策略的基本思想,给出了控制系统的具体设计过程,然后,进行了阶跃响应、低速跟踪和正弦响应试验。试验结果表明,所提出的鲁棒控制策略是有效的和可行的。     

二阶滑模跟踪微分器与带通滤波器频域分析

简要介绍了二阶滑模跟踪微分器的基本原理,应用描述函数法对其频率特性进行了分析。在此基础上设计了带通滤波器并对其频率特性进行了分析,给出了二阶滑模跟踪微分器及由其所构成带通滤波器的参数选择和调试方法。仿真结果表明,通过适当选取有关设计参数,带通滤波器能够从几种频率合成信号中提取出特定频率的信号。     

运载火箭电动伺服机构前馈自抗扰控制方法的设计

运载火箭伺服机构是火箭的执行机构,在工作过程中不仅要求伺服机构具有较好的阶跃响应和力矩抗扰性能,还要求伺服机构能够较好地跟踪箭载计算机发送的位置随动指令。常规的自抗扰控制(ADRC)建模时,将输入的微分量近似为0,使得输入时变信号时会产生建模误差,该误差无法通过扩张状态观测器(ESO)进行观测并补偿,导致系统的跟踪误差较大。针对常规自抗扰控制对时变信号跟踪误差较大的问题,提出了一种将位置输入微分前馈(PIDF)引入自抗扰控制的前馈自抗扰控制方法。通过理论推导和建模仿真得知,该方法可降低系统对正弦输入信号的跟踪误差并提高系统的动态特性,同时仍具有较强的抗干扰性能。最后通过试验验证了该方法的有效性。     

北斗导航接收机频率稳定度传递算法

为了提高北斗导航接收机的灵敏度,提升其弱信号跟踪能力,通常需要利用长时间的相干积分来提高环路信噪比。但是,当相干积分时间加长到一定程度时,环路性能反而有所下降,信噪比提升也不能达到理论值。针对由剩余频率误差和晶振误差引起的相干积分能量损失问题,主要研究了频率偏差对环路跟踪性能的影响,并提出了利用频率稳定度传递策略辅助弱信号跟踪的方法,解决了北斗导航接收机弱信号跟踪性能提升的问题,最大程度地改善了相干积分的效果,实现了对弱信号的跟踪。利用软件接收机平台对提出的频率稳定度传递算法进行验证,仿真结果表明该算法可使环路信噪比提升4dB ~5dB,充分说明了其可行性及有效性。