一种新的高精度天文导航方法

介绍了一种新的高精度天文导航方法,该方法构建了在天球坐标系中的天文导航姿态与航向解算模型。该模型在不利用惯导姿态数据的前提下进行计算,通过构建的模型演变得到运载体的精确姿态及航向,可以有效校正惯导设备因惯性陀螺漂移而导致的姿态误差与航向误差。     

捷联惯导系统圆锥误差分析

捷联惯导系统由于数学平台隔离作用的不完善,当运载体沿机体坐标轴存在同频率的角振动和线振动时,角振动引起的整流效应将在姿态更新计算中产生圆锥误差,角振动和线振动引起的整流效应将在速度计算中产生划桨误差,在位置计算中产生涡卷误差。文中详细分析了圆锥误差产生机理,针对某型飞机装备 SIGMA50 GPS/SINS 组合导航系统对底座安装的精度要求,分析了安装误差、陀螺频带不够宽、姿态更新率过低对姿态精度的影响,并对维护捷联惯导系统提出建议。     

Ground Testing of Inertial Navigators to Improve Dynamic Performance

A ground testing method has been devised to evaluate the dynamic errors of an inertial navigation system. A trimmed stationary inertial system in the navigation mode can be subjected to programmed platform orm drift rates, and generate position outputs which are compared with those of a perfect navigator. The linearized error equations for this testing mode are derived and the resulting position error propagation is analyzed using Kalman filtering in order to identify the error sources. A simulated platform with a fixed set of error sources is analyzed to evaluate this testing concept. An example is presented to show that the gyro and accelerometer scale factor and misalignment error coefficients can be estimated.     

一种双轴旋转惯性导航系统的重要参数快速自标定方法

为了提高双轴旋转惯导重要参数标定的快速性和精度,提出一种快速自标定方法。通过设置不同的标定路径可以在10 min内完成陀螺和加速度计的零偏以及标度因数误差的标定。该方法利用基于姿态误差观测的卡尔曼滤波完成陀螺零偏的估计。通过六位置翻滚并以速度误差作为观测量进行卡尔曼滤波,完成加速度计的零偏及标度因数误差的标定。使天向陀螺绕方位轴旋转4周,使水平陀螺绕水平轴转动4周,通过计算旋转前后的姿态误差完成陀螺标度因数误差的估计。仿真和试验结果表明,该方法可以实现双轴旋转惯导重要参数10 min内完成自标定,且具有较高的精度。     

适合航天飞机应用的星体跟踪器

本文推导了航天飞机采用新型探测器件——电荷耦合器件CCD（ChargeCoupled DeVices）组成的星体跟踪器进行姿态稳定的公式。并提供一种适合航天飞机应用的星体跟踪器原理样机。     

Wavelet de-noising for IMU alignment

Inertial navigation system (INS) is presently used in several applications related to aerospace systems and land vehicle navigation. An INS determines the position, velocity, and attitude of a moving platform by processing the accelerations and angular velocity measurements of an inertial measurement unit (IMU). Accurate estimation of the initial attitude angles of an IMU is essential to ensure precise determination of the position and attitude of the moving platform. These initial attitude angles are usually estimated using alignment techniques. Due to the relatively low signal-to-noise ratio of the sensor measurement (especially for the gyroscopes), the initial attitude angles may not be computed accurately enough. In addition, the estimated initial attitude angles may have relatively large uncertainties that may affect the accuracy of other navigation parameters. This article suggests processing the gyro and accelerometer measurements with multiple levels of wavelet decomposition to remove the high frequency noise components. The proposed wavelet de-noising method was applied on a navigational grade inertial measurement unit (LTN90-100). The results showed that accurate alignment procedure and fast convergence of the estimation algorithm, in addition to reducing the estimation covariance of the three attitude angles, could be obtained.     

单轴旋转惯导系统误差特性分析

旋转调制技术能够抑制陀螺和加速度计的误差,提高惯性导航系统的导航精度。从捷联惯导系统的误差方程出发,推到出了单轴旋转惯导系统的误差传播方程,在此基础上分析了旋转调制的基本原理。分别对陀螺和加速度计常值偏差、标度因数误差、安装误差和转台安装误差等在旋转调制下的影响进行了研究,仿真分析了旋转调制提高系统导航精度的作用,最后在实验室条件下做静止导航实验进行了验证。研究的结果能为单轴旋转惯导系统的研究和开发提供一定的理论参考。     

置信度检验法在新测量船船姿故障诊断中的应用

为解决惯导设备数据异常而状态码未及时更新所导致的设备状态无法判断的问题展开研究。基于新测量船分布式惯导的安装设计,分析了如何通过坐标转换的方式,计算得到冗余的船姿数据。根据冗余船姿数据的特性,采用置信度检验法对各姿态测量设备进行检测,建立了设备可信任度矩阵,并将矩阵元素与对应设备进行标志,可以通过分析矩阵元素有针对性地进行船姿故障诊断,并对检测过程中可能会产生的矩阵特性做了分析说明。最后,在某次任务惯导实测数据的基础上,仿真了横摇数据的漂移,并通过置信度检验法对其进行检验,实验结果验证了方法的正确性。     

卫星拒止情况下低精度惯导系统航姿算法研究

在卫星拒止情况下,低精度MEMS惯导系统由于惯性器件性能较差,无法长时间保持姿态精度。从重力矢量及飞行器的动力学特性出发,提出了一种基于动态检测和Kalman数据融合的航姿算法。该算法从导航与飞控一体化的理念出发,实时判断飞行器机动和飞控状态,在低动态时利用Kalman滤波器对水平加速度和惯性解算的姿态角进行数据融合,估计和修正水平姿态误差,从而提高水平姿态精度。经过飞行仿真验证,该算法可有效完成飞行器的动态检测,并保证在系统机动情况下水平姿态误差在2°以内。     

Pseudo-linear inertial navigation algorithm

A new method is illustrated for processing the output of a set of triad orthogonal rate gyros and accelerometers to reconstruct vehicle navigation parameters (attitude, velocity, and position). The paper introduces two vectors with dimensions 4 × 1 as velocity and position quaternions. The navigation equations for strapdown systems are nonlinear but after using these parameters, the navigation equations are converted into a pseudo-linear system. The new set of navigation equations has an analytical solution and the state transition matrix is used to solve the linear time-varying differential equations through time series. The navigation parameters are updated using the new formulation for strapdown navigation equations. Finally, the quaternions of velocity and position are converted into the original position and velocity vectors. The combination of the coning motion and a translational oscillatory trajectory is used to evaluate the accuracy of the proposed algorithm. The simulations show significant improvement in the accuracy of the inertial navigation system, which is achieved through the mentioned algorithm.     

两种多天线GNSS动态定姿方法的比较

针对移动载体对姿态的需求,对两种多天线GNSS动态定姿方法,即直接法和最小二乘迭代法进行了研究.分析了定姿的原理,给出了姿态解算模型.基于车载四天线GNSS的实测数据,分别用两种方法进行了姿态解算,并用同一运动平台高精度惯导给出的姿态作为参考值,对两种定姿方法的精度和可靠性进行了分析和比较.     

Prototype personal navigation system

Honeywell Laboratories recently funded the development of a prototype personal navigation system based on MEMS technologies. The system components include a MEMS inertial measurement unit, a three-axis magnetometer, a barometric pressure sensor, and a SAASM GPS receiver. The system also uses Honeywell's human motion-based pedometry algorithm. The navigation process is based on a strap-down inertial navigator aided by feedback from a Kalman filter using typical measurements from the GPS, magnetometer and barometer when available. A key innovation is the addition of an independent measurement of distance traveled based on the use of a human motion algorithm. The navigation system combines the best features of dead reckoning and inertial navigation, resulting in positioning performance exceeding that achieved with either method alone. Subsequent to the Honeywell effort, DARPA funded an individual Personal Inertial Navigation System (iPINS) seedling program. Honeywell worked to improve the baseline personal navigation system with the objective of demonstrating the feasibility of reliably achieving navigation accuracy < 1 % of distance traveled in GPS-denied scenarios. In addition, an analysis was conducted to determine the benefit of incorporating terrain correlation into the personal navigation system. The results of this analysis indicate that overall navigation accuracy can be significantly improved through the application of terrain correlation. This presents an are presented. In addition, conclusions from the terrain correlation analysis conducted under the iPINS seedling program are included.     

惯性+星光折射定位组合导航技术研究

由于现有惯性器件精度水平有限,纯惯性导航误差较大,因此需要采用组合导航的方式来提高导航精度。目前,全自主组合导航方式中传统的惯性+星光定姿组合导航方法只能实现定姿,不能实现定位,无法修正加速度表测量误差引起的惯性导航误差,故在精度上可提升空间有限。为此,提出了一种惯性+星光折射定位组合导航方法,重点从星光折射定位原理、大气折射模型、非线性滤波和选星策略几个方面进行论证及分析。通过理论分析与数学仿真相结合的手段,验证了星光折射定位原理的正确性及工程可行性,可将自主导航精度提升至100m,从而为进一步提高自主导航精度提供了一种技术途径。     

纬度未知条件下捷联惯导系统晃动基座的初始对准

针对纬度未知条件下捷联惯导系统(SINS)晃动基座的初始对准问题,提出晃动基座下的纬度估计算法和初始对准方法。前者通过惯性坐标系下两个不同时刻的重力加速度向量的夹角来求取纬度;后者利用惯性坐标系下的姿态更新来实时地反映载体在晃动干扰下的姿态变化,结合初始姿态的最优估计实现初始对准。理论分析表明,本文提出的纬度估计算法的误差主要由加速度计误差决定,陀螺误差和晃动干扰对其影响很小。仿真结果表明,本文提出的纬度估计算法和初始对准方法适用于纬度未知条件下晃动基座的初始对准。     

INS/GNSS组合导航系统空中快速对准方法

针对机载惯性/全球导航卫星系统(INS/GNSS)组合导航系统地面静基座对准时间较长、航向对准精度较低以及惯导空中故障重启后无法快速得到精确姿态信息重新进入导航状态等问题,提出一种快速初始对准方法。该对准方法基于惯性导航比力方程,利用GNSS的定位、测速信息与惯性测量组件(IMU)的输出信息解算载体姿态信息,并结合遗传-牛顿算法与求和自回归滑动平均(ARIMA)模型卡尔曼滤波信号降噪技术提高姿态信息的解算精度。基于实测飞行数据的解算验证了该方法的有效性、对准精度以及在实际工程应用中的优越性。     

捷联惯性制导系统的圆锥误差及其补偿

圆锥误差是捷联惯导系统,特别是激光陀螺捷联惯导系统重要的误差源,为提高激光捷联惯性系统的导航精度,防止姿态误差的积累,本文研究了圆锥补偿算法和圆锥补偿误差特性,给出了常用的8种圆锥补偿算法,针对激光陀螺惯组的实际应用背景,开展了弹道仿真研究,给出了圆锥误差对激光陀螺捷联惯导系统导航精度的影响和补偿修正的效果。     

基于视觉的惯性导航误差在线修正

陀螺零偏和加速度计零偏是影响惯性测量单元(IMU)积分精度的重要因素。提供一组精确的实时的零偏估计可以提高IMU的积分精度,为视觉导航提供良好的位姿预测,提高整个系统的动态性能。通过合理地建立IMU的噪声模型以及IMU和视觉的组合方程,利用一种基于李群和李代数知识的IMU预积分方法将零偏进行合理的线性化,运用Kalman滤波进行IMU零偏的在线估计。实验结果表明,通过本文的修正方法,惯性导航的平均积累误差由0.034m/s提高到0.0037m/s,精度明显提高。     

旋转调制微机电惯性系统方案研究

微机电惯性系统具备小体积优势，但现阶段系统精度仍在消费级与战术级之间。研究了旋转调制技术在微机电惯性系统中的应用，探讨了基于PCB小型化电机的微旋转方案，并开展了单轴旋转调制验证试验，以探索旋转调制技术对微机电惯性系统性能的提升作用。结果表明，在微机电陀螺精度约为2(°)/h的条件下，该方案能够实现约0.2n mile/10min的导航精度，相较于同等惯性器件条件下的捷联式系统，精度提高了不止1个数量级，证明了该方案能够有效提高微机电惯性系统的精度。     

空空导弹捷联惯导系统空中标定技术研究

针对空空导弹捷联惯导系统提出了一种空中标定方法。该方法是在载机空中飞行的过程中,利用机载主惯导到弹载子惯导的数据传递过程,利用卡尔曼滤波估计算出惯性器件误差的一种标定方法。通过数字仿真分析,该方法可以实现对陀螺常值漂移和加速度计常值偏置一定程度的标定,并能够延长其定期标定的周期。