基于网格自适应的飞行器防热材料热传导系数辨识

为准确辨识高超声速飞行器防热材料热传导系数，构造了针对热传导偏微分方程系统的约束泛函极值问题，基于表征多项式逼近性能的Weierstrass定理，采用Lagrange多项式对热传导系数进行参数化建模，进而将无穷维的约束泛函极值问题转化为有限维的非线性规划问题，再利用基于动态优化方程的优化方法将此非线性规划问题转化为常微分方程初值问题进行求解。为从较有限的测量数据中准确地“学习”热传导系数，建立采用“过拟合”判别准则的网格自适应迭代算法改善辨识精度。研究表明本文采用的辨识策略与优化方法有效，辨识结果可以较准确地反映材料热传导系数的变化规律。     

Communication constraints,indexical countermeasures,and crew configuration effects in simulated space-dwelling groups

Previous research with groups of individually isolated crews communicating and problem-solving in a distributed interactive simulation environment has shown that the functional interchangeability of available communication channels can serve as an effective countermeasure to communication constraints. The present report extends these findings by investigating crew performance effects and psychosocial adaptation following: (1) the loss of all communication channels, and (2) changes in crew configuration. Three-person crews participated in a simulated planetary exploration mission that required identification, collection, and analysis of geologic samples. Results showed that crews developed and employed discrete navigation system operations that served as functionally effective communication signals (i.e., “indexical” or “deictic” cues) in generating appropriate crewmember responses and maintaining performance effectiveness in the absence of normal communication channels. Additionally, changes in crew configuration impacted both performance effectiveness and psychosocial adaptation.     

Low-Frequency Microaccelerations onboard the Foton-11 Satellite

We analyze the microacceleration measurements carried out onboard the Foton-11 satellite with the three-component accelerometer BETA. The microaccelerations were recorded virtually throughout the entire orbital flight of the Foton-11 satellite. The data obtained were analyzed in the following way. First they were used to determine the actual rotational motion of the satellite for several arbitrarily selected time intervals 4 h long. This problem was solved by constructing the approximation of the microacceleretation low-frequency component (previously determined from the data) by its calculated analog computed along the solutions to differential equations of rotational motion of the satellite. The approximation was made by the least squares method. As a result, those mathematical model parameters and the solutions to equations of motion were found that gave the best consistency of the microacceleretation low-frequency component and its calculated analog. Then the spectral analysis of the low-frequency component and its calculated analog was made. It was shown that, although basic harmonics of these functions coincided sufficiently well, some harmonics of the low-frequency component failed to be interpreted in terms of the satellite's rotational motion.     

基于石墨板的电子设备大功率器件散热方法研究

针对宇航电子设备大功率器件的散热路径进行了分析。对顶部散热的器件采用高导热石墨板、精确控制导热垫压缩量、增加导热路径等方式进行散热,对腹部散热的器件采用覆铜通孔等方式进行散热,并结合热仿真和温循试验,有效解决了大功率器件散热问题。     

An approach to the dynamics of modular repetitive structures

The dynamics of modular structures is approached in this paper by means of the discrete Fourier transform. This method, applied to a structure with N bays and ring type boundary conditions, leads to N uncoupled systems of the size of a single bay. For other boundary conditions, it leads to a “spectrally resolved” eigenproblem, that is a form whose dominant terms in each field of frequency are evidenced. Approximate reduced models in narrow frequency fields can therefore be generated by using the “spectral condensation” technique. The method can be applied with general boundary conditions, but the present paper deals mostly with the “clamped edges” boundary condition and shows that numerical advantages can be obtained, particularly for the large space structures.     

空间站热收集方式的气压适应性研究

热管理系统是保障空间站正常运行的关键系统,其热量收集通常涉及多种传热方式。 空间站舱内气压下降将削弱空气的对流换热能力,从而造成热收集方式的气压适应性差异。 分析了这种差异及其对空间站热管理的影响。设计了两种针对密封舱的热量收集方式,第 一种单纯用空气强制对流,第二种通过在密封舱内加装冷板,同时采用强制对流、导热和辐 射进行热量收集。首先利用简化的密封舱换热模型给出了描述两种热量收集方式气压适应性 的分析解,然后利用集成全局热数学模型分析给出了热管理系统采用这两种热量收集方式时 压力下降对空间站温度控制的影响。结果表明,当热管理系统以空气对流为主进行热 量收集时,气压下降可能导致舱内温度大幅升高;当同时采用导热、辐射及对流等多种途径 收集热量时,热管理系统的气压适应性较强,有利于空间站的稳定运行。
     

分离式陶瓷基高温热疏导系统的耦合传热特性

对采用高温陶瓷基复合材料的高超声速飞行器分离式热疏导系统,建立了气动加热下 ,高、低热流区材料内导热－辐射与疏导通道内对流换热的耦合传热模型。采用控制容积法 结合蒙特卡罗法计算两区域陶瓷基复合材料内的导热－辐射换热,并与热疏导通道热平衡方 程耦合求解。通过模拟计算,分析了气动加热热流比、辐射散热面积比、材料光学厚度、导 热－辐射参数、对流－辐射参数对热疏导系统传热性能的影响。初步获得了提高分离式热疏 导系统传热性能的各参数调节规律。
     

Symmetric periodic solutions of the Hill’s problem. I

The planar circular Hill’s problem is considered, as well as its limiting integrable variant called the Hénon problem, for which the original Hill’s problem is a singular perturbation. Among solutions to the Hénon problem there are a countable number of generating solutions-arcs that are uniquely determined by the condition of successive passage through the origin of coordinates—singular point of equations of motion of the Hill’s problem. Using the generating solutions-arcs as “letters” of a certain “alphabet”, one can compose, according to some rules, the “words”: generating solutions of families of periodic orbits of the Hill’s problem. The sequence of letters in a word determines the order of orbit transfer from one invariant manifold to another, while the set of all properly specified words determine the system’s symbolic dynamics.     

The strong stability of most natural motions

Problems of Hamiltonian Mechanics can generally be simplified by some Von Zeipel transformations which reduce the influence of short period parameters and lead to very slowly variable functions: the “quasi-integrals”; however these transformations are implicit and then difficult to use.An explicit construction of the quasi-integrals is presented here and is used to integrate the motion of an artificial satellite perturbed by the zonal harmonics of the Earth gravitational potential; the quasi-integrals are also used to obtain informations on the stability of natural satellites, i.e. lower bounds on the duration of escape or capture.     

Artificial satellites orbits in 2:1 resonance: GPS constellation

In this work, the resonance problem in the artificial satellites motion is studied. The development of the geopotential includes the zonal harmonics J₂₀ and J₄₀ and the tesseral harmonics J₂₂ and J₄₂. Through an averaging procedure and successive Mathieu transformations, the order of dynamical system is reduced and the final system is solved by numerical integration. In the simplified dynamical model, three critical angles are studied. The half-width of the separatrix is calculated through a linearized model which describes the behavior of the dynamical system in a neighborhood of each critical angle. Through the resonance overlap criterion the possible regular and irregular motions are investigated by the time behavior of the semi-major axis, argument of perigee and eccentricity. The largest Lyapunov exponent is used as tool to verify the chaotic motion.     

Artificial satellites orbits in 2:1 resonance: GPS constellation

In this work, the resonance problem in the artificial satellites motion is studied. The development of the geopotential includes the zonal harmonics J₂₀ and J₄₀ and the tesseral harmonics J₂₂ and J₄₂. Through an averaging procedure and successive Mathieu transformations, the order of dynamical system is reduced and the final system is solved by numerical integration. In the simplified dynamical model, three critical angles are studied. The half-width of the separatrix is calculated through a linearized model which describes the behavior of the dynamical system in a neighborhood of each critical angle. Through the resonance overlap criterion the possible regular and irregular motions are investigated by the time behavior of the semi-major axis, argument of perigee and eccentricity. The largest Lyapunov exponent is used as tool to verify the chaotic motion.     

折叠状航天器太阳电池阵在轨热分析(Ⅰ)——计算模型

将太阳电池板蜂窝芯子、面板和硅电池片中发生的辐射－传导复合传热过程等效为一个无内热源的三维瞬态热传导问题。根据电池板的材料、尺寸及结构形态导出太阳电池板的三维等效导热系数。针对任意两相邻电池板表面间的热辐射交换规律，构造适用于这表面内节点温度的离散方程系数。研究折叠状态太阳电池阵边界节点的热特点时，仔细考虑了地球红外辐照、地球的太阳反照、太阳辐射加热、航天器舱体几何遮挡、深冷环境散热、飞行轨道高度及航天器在太阳－地球系中不同位置等造成的影响。利用本文给出的方程，可以求出展开前在轨折叠状太阳电池阵三瞬态不稳定温度场。     

Orbital mechanics about small bodies

Small solar system bodies such as asteroids and comets are of significant interest for both scientific and human exploration missions. However, their orbital environments are among the most highly perturbed and extreme environments found in the solar system. Uncontrolled trajectories are highly unstable in general and may either impact or escape in timespans of hours to days. Even with active control, the chaotic nature of motion about these bodies can effectively randomize a trajectory within a few orbits, creating fundamental difficulties for the navigation of spacecraft in these environments. In response to these challenges our research has identified robust and stable orbit solutions and mission designs across the whole range of small body sizes and spin states that are of interest for scientific and human exploration. This talk will describe the challenges of exploring small bodies and present the practical solutions that have been discovered which enable their exploration across the range of small body types and sizes.     

Spacecraft “Foton-M” in-flight thermal conditions

The problem of thermal conditions aboard the “Foton-M” spacecraft during its orbital flight is under consideration in this paper. The problem is very acute for performing microgravity experiments onboard of the orbital platform, because on one hand, many experiments need a definite temperature range to be performed, and on the other hand all electrical devices aboard radiate heat. To avoid uncontrolled heating of the environment special heat exchangers are used. To transport heat from different places of the capsule to heat exchanger special fans are installed given definite orientation. All the heat exchange facilities should be designed in advance being adjusted to current capsule loading and heat radiation by equipment. Thus special tools are needed predicting the capsule thermal conditions being function of equipment placement.The present paper introduces a new developed prognostic mathematical model able to forecast temperature distribution inside the capsule with account of fan induced air flows, thermal irradiation by scientific equipment and heat losses due to cooling system.     

On dynamics of a plasma ring rotating in the magnetic field of a central body: Magneto-gyroscopic waves. Problems of stability and quantization

Based on a mathematical model described in [1], some new aspects of the dynamics of a thin planar plasma ring rotating in the magnetic field of a central body are considered. The dipole field is considered assuming that the dipole has a small eccentricity, and the dipole axis is inclined at a small angle to the central body’s axis of rotation. Emphasis is placed on the problem of stability of the ring’s stationary rotation. Unlike [1], the disturbed motion is considered which has a character of eddy magneto-gyroscopic waves. The original mathematical model is reduced to a system of finite-difference equations whose asymptotic analytical solution is obtained. It is demonstrated that some “elite” rings characterized by integral quantum numbers are long-living, while “lethal” or unstable rings (antirings) are associated with half-integer quantum numbers. As a result, an evolutionally rife rotating ring of magnetized plasma turns out to be stratified into a large number of narrow elite rings separated by gaps whose positions correspond to antirings. The regions of possible existence of elite rings in near-central body space are considered. Quantum numbers determining elite eigenvalues of the mean sector velocity (normalized in a certain manner) of a ring coincide with the quantum numbers appearing in the solution to the Schrödinger equation for a hydrogen atom. Perturbations of elite orbits corresponding to these quantum numbers satisfy the de Brogli quantum-mechanical condition. This is one more illustration of the isomorphism of quantization in microcosm and macrocosm.     

A complexity-based risk assessment of low-cost planetary missions: when is a mission too fast and too cheap?

Under constrained budgets and rigid schedules, NASA and industry have greatly increased their utilization of small satellites to conduct low-cost planetary investigations. Recent failed small planetary science spacecraft such as Mars Polar Lander (MPL) and Mars Climate Orbiter (MCO), and impaired missions such as Mars Global Surveyor (MGS) have fueled the ongoing debate on whether NASA's “Faster, Better, Cheaper” (FBC) approach is working. Several noteworthy failures of earth-orbiting missions have occurred as well including Lewis and the Wide-field Infrared Experiment (WIRE). While recent studies have observed that FBC has resulted in lower costs and shorter development times, these benefits may have been achieved at the expense of lowering probability of success. One question remaining to be answered is when is a mission “too fast and too cheap” that it is prone to failure? This paper assesses NASA FBC missions in terms of a complexity index measured against development time and spacecraft cost. A comparison of relative failure rates of recent planetary and earth-orbiting missions are presented, and conclusions regarding dependence on system complexity are drawn.     

某卫星真空热试验中一些新要求的解决措施

某卫星在进行真空热试验时,对热流提出了三个方面的新要求：(1)对某些热流要求较低的加热区的加热笼进行修改,提高其低热流实现能力;(2)减小支架漏热;(3)实时计算设计热流和实际热流的周期积分偏差。由于修改时的约束条件较多,新的要求的满足非常困难。经过努力,最终解决了这些问题,通过对某些加热笼采取加热带双面涂黑漆的方法,实现了低热流;经过计算和针对性的设计,支架漏热不超过0．1188W;同时实现了设计热流与实际热流周期积分偏差的实时计算。     

On the stability of spinning satellites

We study the directional stability of rigid and deformable spinning satellites in terms of two attitude angles. The linearized attitude motion of a free system about an assumed uniform-spin reference solution leads to a generic MGK system when the satellite is rigid or deformable. In terms of Lyapunov’s stability theory, we investigate the stability with respect to a subset of the variables. For a rigid body, the MGK system is 6-dimensional, i.e., 3 rotational and 3 translational variables. When flexible parts are present the system can have any arbitrary dimension. The 2×2 McIntyre–Myiagi stability matrix gives sufficient conditions for the attitude stability. A further development of this method has led to the Equivalent Rigid Body method. We propose an alternative practical method to establish sufficiency conditions for directional stability by using the Frobenius–Schur reduction formula. As practical applications we discuss a spinning satellite augmented with a spring–mass system and a rigid body appended with two cables and tip masses. In practice, the attitude stability must also be investigated when the spinning satellite is subject to a constant axial thrust. The generic format becomes MGKN as the thrust is a follower force. For a perfectly aligned thrust along the spin axis, Lyapunov’s indirect method remains valid also when deformable parts are present. We illustrate this case with an apogee motor burn in the presence of slag. When the thrust is not on the spin axis or not pointing parallel to the spin axis, the uniform-spin reference motion does not exist and none of the previous methods is applicable. In this case, the linearization may be performed about the initial state. Even when the linearized system has bounded solutions, the non-linear system can be unstable in general. We illustrate this situation by an instability that actually happened in-flight during a station-keeping maneuver of ESA’s GEOS-I satellite in 1979.     

固体火箭发动机燃烧室喷管统一流场计算

采用ＳＩＭＰＬＥ算法的可压缩形式求解固体火箭发动机燃烧室喷管内的全速度统一流场;在非交错的配置网格基础上用有限体积法离散Ｎ－Ｓ方程,采用强隐式算法（ＳＩＰ）求解线性代数方程组;采用边界标志法实现复杂几何形状下的多区域统一计算;采用喷管外型逼近法保障计算稳定性;通过与同类计算结果的对比表明：上述算法的组合能够成功地获取固体火箭发动机内流场的整体结构。     

Technological experiments aboard “Salyut-5”

During the flight of the Soviet orbital space complex “Salyut-5”—“Soyuz” the experiments on the space technology and materials production had been conducted amongst the versatility of various scientific research. The experiment “Diffusiya” was aimed at investigating the features of mass transfer under near-zero-gravity conditions. The experimental results had been compared with those obtained under terrestrial conditions and theoretical calculations. The experiment “Potok” was aimed at studying the gas inclusions motion dynamics in the liquid. The crystal growth from solutions was fulfilled with the aid of the “Crystal” instrument. The experiment “Sphera” had an objective to study the solidification of multicomponent metal sample with a free surface. When soldering the pipe junctions use was made of the “Reaktsiya” instrument. The experimental results contributed greatly to the creation of scientific foundations of space technology and material production.