基于锥形运动的制导火箭速度控制导引律设计

针对制导火箭落点速度的约束要求,提出了一种采用锥形运动控制导弹飞行速度的导引方法。该方法首先设计了满足速度约束的虚拟目标理想运动轨迹,将导弹减速控制问题转化为对虚拟目标的追踪导引问题,通过建立制导火箭与虚拟目标的相对运动模型,分析了弹目相对位置和相对速度的关系,推导了具有速度控制的导引律一般形式,并采用动态逆控制理论设计了锥形运动控制指令和导引参数。通过数字仿真对比了不同落角约束条件下导弹锥形运动的速度控制效果,结果表明该方法设计的导引律能够满足制导火箭速度约束要求,且制导精度高、控制效果好,为导弹锥形运动速度控制技术提供了参考。     

基于罚函数序列凸规划的多无人机轨迹规划

多无人机（UAVs）轨迹规划是具有非线性运动约束和非凸路径约束的最优控制问题。引入序列凸规划思想,将非凸最优控制问题近似为一系列凸优化子问题,并利用成熟的凸优化算法进行求解,以更好地权衡最优性和时效性。首先,建立了多无人机协同轨迹规划的非凸最优控制模型。然后,利用离散化和凸近似方法将其转换为凸优化问题,包括对无人机运动模型的线性化,以及对威胁规避约束和无人机碰撞约束的凸化。同时,提出了一种离散点间的威胁规避方法,保证无人机在离散轨迹点间的飞行安全。在凸优化模型的基础上,给出了基于罚函数序列凸规划求解多无人机轨迹规划的具体框架。最后,通过数值仿真验证了方法的有效性,结果表明该方法在多机轨迹规划结果的最优性和时效性都要优于伪谱法,而且优势随编队数量的增加而增大。     

基于偏置比例导引的垂直攻击滑模制导律

为了提高空地导弹毁伤效果,需要对地面固定目标采用大角度乃至垂直打击方式。针对这一需求,设计了一种基于偏置比例导引的垂直攻击滑模制导律。首先在传统的比例导引制导律的基础上增加了一个角度约束偏置项,并结合滑模变结构理论使其滑模变结构化。然后运用自适应滑模趋近律,并采用准滑动模态控制削弱了抖振的影响。仿真结果表明:此制导律控制落角能力较强,同时具有较高的命中精度。整个攻击过程中的弹目视线角速度变化较小,最后以垂直落角攻击目标。     

基于凸优化的再入轨迹三维剖面规划方法

可重复使用飞行器一般采用大升阻比气动外形，再入轨迹三维剖面规划方法可充分发挥这类飞行器固有的机动能力。计算量大是制约三维剖面规划应用的难题，为提高计算效率，提出了一种基于凸优化的再入轨迹三维剖面规划方法。首先，分析运动方程特性，利用定义新的控制变量、约束松弛、连续线性化等技术，将原始非凸的三维剖面规划问题转化为一个凸优化问题。其次，将指令反解步骤嵌入至序列凸化算法中，通过迭代求解凸优化子问题，获得原问题的可行解。数值仿真结果表明所提方法具有较高的求解精度和确定的收敛性质，飞行器的机动能力得到充分发挥；与伪谱法的结果对比表明凸优化方法在轨迹规划问题上具有更高的求解效率。     

基于神经网络的精确末制导律研究

针对动能杀伤武器重量极小化问题，基于神经网络技术、动态逆补偿法和非线性优化法，研究了两种精确末制导律，一种采用FFBP神经网络学习一要制导方程动态逆实现精神制导，另一种采用FFBP神经网络学习非线性优化解实现精确制导，仿真分析表明，前者对目标加速度估计误差过于敏感，无法实现；而后者在目标加速度有误差时仍能实现精确制导，估于偏置比例导引，并可以使动能杀伤武器重量极小化。     

导弹速度时变的攻击时间与攻击角度控制导引律

针对导弹速度非定常情况下的协同制导问题,提出了两种分别满足攻击时间约束、攻击时间与攻击角度约束的导引律.首先通过求解导弹在比例导引(PN)及带攻击角度约束的偏置比例导引(BPNIAC)下的系统微分方程,得到导弹飞行的实际剩余航程,并根据指定的攻击时间与导弹的实际速度曲线构造标称剩余航程,将攻击时间控制问题转化为导弹实际剩余航程对标称剩余航程的跟踪问题.然后,在PN及BPNIAC的基础上附加反馈控制项使导弹实际的剩余航程跟踪标称值,从而实现导弹速度时变情况下攻击时间的控制要求.仿真结果验证了该方法的有效性,实际应用中可根据预测速度曲线及在线更新策略对标称剩余航程进行估算.     

基于移动渐近线方法的结构多刚度拓扑优化设计

基于人工密度指数法,结合序列分层优化方法和折衷规划法,提出并建立了一种求解复杂工况下连续体结构多刚度拓扑优化设计问题的多目标混合优化策略。连续体结构的多刚度拓扑优化设计问题本质上是一种非线性数学规划问题,以数学规划方法中的移动渐近线方法为基础,提出一种具有较佳全局收敛性和单调性特点的序列凸规划近似方法,该法对于目标函数复杂和多约束的拓扑优化问题具有更好的适定性。通过典型的数值算例证明了所研究方法的有效性。     

比例导引导弹理想弹道的动态修正

本文基于近红外导弹比例导引的要求，研讨了比例导引规律的实现问题，提出了比例导引理想弹道及其线性化，并实际考虑导弹在发射时的瞄准误差和在制导过程中目标机动运动，进行动态修正的基础上，得出了指导正确设计和使用比例引导弹的重要结论。     

用于结构优化的一种新的两点近似函数

提出一种基于两点信息的近似函数,它在当前设计点能够保证原函数的函数值、一阶导数值和近似二阶导数值;在另一设计点保证原函数的一阶导数值。用该近似函数形成结构优化原问题的序列近似问题,再用约束变尺度法解近似问题。通过典型算例的计算,结果表明本方法具有较好的收敛性和较高的计算效率,适用于结构优化问题的求解     

基于纯比例导引的拦截碰撞角约束制导策略

拦截碰撞角约束制导是当前导弹制导研究的关键问题之一。首先基于理想比例导引（IPN）律拦截非机动目标的解析解,推导了纯比例导引律（PPN）拦截固定目标的解析解,得到了弹目相对距离、制导指令加速度和导弹前置角的显示表达式,并进一步得到了拦截碰撞角与弹目相对运动状态和比例导引系数之间的解析表达式。其次,基于该解析表达式,提出了基于PPN的拦截碰撞角约束制导策略（PPNIACG）,并探讨了在铅垂面内进行落角约束打击和水平面内进行拦截碰撞角约束打击的2种实现方式。最后,以弹道成型制导律（TSG）和最优碰撞角约束制导律（OIACG）为参考,通过数值仿真算例,对PPNIAC的拦截性能进行了对比分析,验证了所提出制导策略的有效性和正确性。     

一种改进的运载火箭迭代制导方法

为提高运载火箭在大气层外当推力出现故障条件下制导算法的最优性、鲁棒性和适应性,提出了一种改进的迭代制导方法。该方法以基于最优控制理论推导的解析形式作为最优控制解,并推导出以5个轨道根数作为终端约束的横截条件,增强了算法的最优性;迭代过程中采用高斯-勒让德方法计算推力积分,并采用球极坐标系下泰勒多项式逼近方法计算引力积分,提高了故障模式下算法的积分精度;该算法采用降维迭代求解模式,并结合对控制变量的合理限幅,保障了推力故障条件下算法的实时性和收敛性。分别基于蒙特卡洛打靶和推力故障条件下进行仿真验证,结果验证了所提方法具有较强的最优性、鲁棒性和故障适应能力。     

Real-time trajectory planning for UCAV air-to-surface attack using inverse dynamics optimization method and receding horizon control

This paper presents a computationally efficient real-time trajectory planning framework for typical unmanned combat aerial vehicle (UCAV) performing autonomous air-to-surface (A/S) attack. It combines the benefits of inverse dynamics optimization method and receding horizon optimal control technique. Firstly, the ground attack trajectory planning problem is mathematically formulated as a receding horizon optimal control problem (RHC-OCP). In particular, an approximate elliptic launch acceptable region (LAR) model is proposed to model the critical weapon delivery constraints. Secondly, a planning algorithm based on inverse dynamics optimization, which has high computational efficiency and good convergence properties, is developed to solve the RHCOCP in real-time. Thirdly, in order to improve robustness and adaptivity in a dynamic and uncer- tain environment, a two-degree-of-freedom (2-DOF) receding horizon control architecture is introduced and a regular real-time update strategy is proposed as well, and the real-time feedback can be achieved and the not-converged situations can be handled. Finally, numerical simulations demon- strate the efficiency of this framework, and the results also show that the presented technique is well suited for real-time implementation in dynamic and uncertain environment.     

Distributed three-dimensional cooperative guidance via receding horizon control

The paper presents a new three-dimensional (3D) cooperative guidance approach by the receding horizon control (RHC) technique. The objective is to coordinate the impact time of a group of interceptor missiles against the stationary target. The framework of a distributed RHC scheme is developed, in which each interceptor missile is assigned its own finite-horizon optimal control problem (FHOCP) and only shares the information with its neighbors. The solution of the local FHOCP is obtained by the constrained particle swarm optimization (PSO) method that is integrated into the distributed RHC framework with enhanced equality and inequality con-straints. The numerical simulations show that the proposed guidance approach is feasible to imple-ment the cooperative engagement with satisfied accuracy of target capture. Finally, the computation efficiency of the distributed RHC scheme is discussed in consideration of the PSO parameters, con-trol update period and prediction horizon.     

吸气式空天飞行器闭环上升制导研究

闭环上升制导是吸气式空天飞行器达到快速优化、实时规划以及自主制导的必然要求。采用GHAME吸气式空天飞行器作为研究对象,提出了闭环上升制导最优控制方案,重点论证了该方案不存在关于节流阀值的奇异问题,并阐述了最优推力控制的Bang-Bang控制。引入有限差分法求解两点边值问题,并通过终端时刻调节算法求解终端时刻自由问题。仿真结果表明,所提出的闭环制导算法是有效、可行的,具有显著的优越性。     

一种基于轨道要素形式终端约束的航天器空间变轨迭代制导算法

针对航天器空间变轨任务的制导问题,研究了一种适用的迭代制导算法。在传统迭代制导方法的基础上,直接在地心惯性系中建立最优控制模型,以推力方向矢量为控制量来适应大姿态角变化情形;推导直接以目标轨道要素为终端约束的边界条件,给出终端约束方程求解精度和入轨精度的关系;得到一种简单有效的基于轨道要素形式终端约束的航天器空间变轨迭代制导算法。通过仿真验证了所给制导算法的有效性,相比传统迭代制导方法其具有更强的适应性。     

Integrated guidance and control design of a flight vehicle with side-window detection

This paper considers the guidance and control problem of a flight vehicle with side-window detection. In order to guarantee the target remaining in the seeker's sight of view, the line of sight and the attitude of the flight vehicle should be under some constraints caused by the side-window, which leads to coupling between the guidance and the attitude dynamics model. To deal with the side-window constraints and the coupling, a novel Integrated Guidance and Control (IGC) design approach is proposed. Firstly, the relative motion equations are derived in the body-Line of Sight (LOS) coordinate system. And the guidance and control problem of the flight vehicle is formulated into an IGC problem with state constraints. Then, based on the singular perturbation method, the IGC problem is decomposed into the control design of the quasi-steady-state subsystem and the boundary-layer subsystem which can be designed separately. Finally, the receding horizon control is applied to the control design for the two subsystems. Simulation results show the effectiveness of the proposed approach.     

Multiple-constraint cooperative guidance based on two-stage sequential convex programming

An improved approach is presented in this paper to implement highly constrained cooperative guidance to attack a stationary target. The problem with time-varying Proportional Navigation (PN) gain is first formulated as a nonlinear optimal control problem, which is difficult to solve due to the existence of nonlinear kinematics and nonconvex constraints. After convexification treatments and discretization, the solution to the original problem can be approximately obtained by solving a sequence of Second-Order Cone Programming (SOCP) problems, which can be readily solved by state-of-the-art Interior-Point Methods (IPMs). To mitigate the sensibility of the algorithm on the user-provided initial profile, a Two-Stage Sequential Convex Programming (TSSCP) method is presented in detail. Furthermore, numerical simulations under different mission scenarios are conducted to show the superiority of the proposed method in solving the cooperative guidance problem. The research indicated that the TSSCP method is more tractable and reliable than the traditional methods and has great potential for real-time processing and on-board implementation.     

通信和测量受限条件下异构多UAV分布式协同目标跟踪方法

研究了通信和测量受限的异构多无人机(UAV)网络化分布式协同目标观测与跟踪问题.该分布式UAV系统采用长机一僚机异构型网络结构,以实现在电子静默和战术隐身条件下扩大探测和打击纵深.提出改进的一致性信息滤波(ICF)算法,实现通信和测量范围内各UAV节点的分布式信息融合.由于一致性算法的收敛性与网络拓扑结构的连通性密切相...     

Integrated guidance and control for damping augmented system via convex optimization

In this paper, an integrated guidance and control approach is presented to improve the performance of the missile interception. The approach includes damping augmented system with attitude rate feedback to decrease the oscillation during the homing phase for missiles with low damping. In addition, physical constraints, which can affect the performance of the missile interception, such as acceleration limit, seeker’s look angle, and look angle rate constraints are considered.The integrated guidan...