基于无线网络的机载数字视频遥测传输技术

针对目前飞行试验视频遥测传输中遇到的遥测频带资源有限、传输视频路数少、数据保密性差等技术问题进行了分析,提出利用单向无线网络进行数字视频遥测传输的技术优势,分析飞行试验单向无线网络数据传输中网络通信协议,主张采用H.264视频压缩技术进行飞行试验图像数据遥测传输的优势技术,对在无线环境下视频传输需要解决的压缩数据编码问题,采用分级编码技术和误码掩盖技术;结合飞行试验对研究结果进行了技术验证,对试验方法和结果进行了说明。     

磁浮飞行风洞试验技术及应用需求分析

随着高速、超高速轨道交通的快速发展,需要发展新型的风洞设备,实现风洞性能和试验能力的突破.磁浮飞行风洞是利用真空管道列车概念结合动模型试验技术提出的一种新概念风洞设备,可以构建出更加接近真实状态的测试环境.本文从磁浮飞行风洞基本概念、国内外研究现状及发展趋势、试验技术、应用需求等几个方面开展论述.首先论述了国内外传统风洞和动模型设备的现状及发展趋势,指出了发展磁浮飞行风洞的必要性;其次,重点对磁浮飞行风洞需要发展的试验技术进行了分析;最后,对磁浮飞行风洞在超高速轨道交通及其他领域的应用需求进行了展望.     

试验设计方法在飞行器性能仿真验证中的应用

试验设计方法通过数据抽样和对结果的统计分析,为在各种误差和干扰的作用下飞行器的飞行性能分析提供了有效途径.介绍了常用的试验设计方法,提出了试验设计方法与数字仿真技术相结合的途径,并论述了飞行性能仿真的试验设计实现流程.箅例结果表明,试验设计方法在飞行仿真中的应用不仅能够大大减小统计打靶计算量,还可以实现飞行器飞行包线的确定以及对飞行性能的验证评估.     

面向先进战斗机研制的风洞模型飞行试验技术

高机动性先进战斗机气动布局与飞控系统设计面临愈加严峻的流动/运动/控制耦合问题,大迎角飞行以及推力矢量等高新技术应用也使其在研制过程中面临更高的技术风险,风洞模型飞行试验是实现飞行器气动/飞行/控制一体化研究、降低研制技术风险的重要手段。介绍了低速风洞模型飞行试验技术原理及国内外发展现状,对试验技术主要特点及其在支撑先进战斗机研制中的作用、应用范围、应用阶段以及面临的主要挑战进行了分析,为试验技术发展和应用提供参考。发展和应用低速风洞模型飞行试验技术,有利于充分挖掘战斗机的气动性能与控制性能,降低试飞风险,是新一代战斗机研制、新技术工程化应用的重要支撑技术。     

基于包络分析的空测数据压缩传输

针对目前遥测设备的通讯能力有限,不能满足地面实时观测的实际问题,本文提出将包络分析应用于飞机飞行试验数据的压缩传输,该方法为空测数据的实时传输提供了一条有效的解决途径.首先通过对空测数据的极值提取、插值及拟合处理获取其包络线,然后求取包络的频谱,再根据采样定理确定其重新采样频率,即可在保证试验数据基本特征和变化规律的前提下,实现数据传输量的减少.通过对一组实际空测振动数据的处理分析,验证了该方法的有效性.     

一种高实时性无人机数据链帧处理技术

为满足无人机遥控飞行试验中数据链传输的高实时性和可靠性要求,提出了数据帧设计和处理技术,加入拼帧机制并改进了数据链传输性能。通过在理想仿真环境、半实物仿真环境和真实飞行中对帧处理技术的研究,总结了拼帧设计思路和方法。最后,通过分析遥控飞行试验的测试数据,验证了帧设计及处理技术的正确性和可靠性。     

故障注入在无人机飞行仿真中的应用

首先引入故障注入的一般概念、各种分类方法以及目前国内外的应用情况。其次研究了用于飞行控制仿真试验的故障注入系统的组成、设计、测试和试验方法，分析了相应故障注入技术的特点。最后介绍了一种在飞行控制系统的研制、试验过程中进行故障注入试验的专用装置——故障注入与分析装置的设计、实现及应用。     

超高速实时光传操纵系统研究

为满足飞行控制及航空电子系统在抗电磁干扰、超高速数据交换等技术要求,本文综合星型及环形拓扑结构的优点,提出一种具有超高速实时光纤网络结构的飞行器光传操纵设计方案.所给出的余度设计及分布式共享内存策略增强了整个光传系统的可靠性及容错性能.应用动态数据分组技术既提高了小数据量的传输效率又提高了大数据量突发传输时的吞吐量.性能测试及地面飞行仿真验证表明,系统数据传输速率可达2.12Gbps,具有很强的实时性及信息传输确定性,适应了机载环境下光传飞行控制及航空电子系统不断发展的需求.     

直升机贴地飞行时人—机响应特性研究

本文分析和研究了驾驶员工作负荷、操纵功效和阻尼等对贴地飞行时直升机飞行品质的影响,导出了简化的驾驶员增益和驾驶员评定等级的工程计算公式,并与飞行试验数据进行了比较.结果表明,本文的方法可用于各种直升机的飞行试验和设计估算.     

低速风洞模型自由飞试验飞行控制系统相似准则及模拟方法研究

低速风洞模型自由飞试验技术具有试验成本低、风险低、试验条件可控、试验数据精度高等优点,是支撑新型飞行器研制和新技术验证的重要试验技术。飞行控制系统作为风洞模型自由飞试验平台的核心系统,与原型机的系统相似是保证试验结果反映原型机稳定与控制特性的关键。从试验相似准则出发,针对飞行控制系统的相似要求进行分析和仿真,研究了其需要满足的相似关系及其模拟方法,分析了飞行控制律相似性转换的方法、系统采样频率的确定以及飞控系统部件动态特性对飞机响应的影响等问题,最后开展了试验验证,验证了飞行控制系统实现以及试验结果应用于原型机飞行稳定与控制响应特性预测的可行性,为低速风洞模型自由飞试验技术的发展与完善提供依据,为其工程化应用奠定基础。     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.     

Preparation of Highly Dispersed Antimony-doped Tin Oxide Nano-powder via Ion-exchange Hydrolysis of SnCl4 and SbCl3 and Azeotropic Drying

Antimony-doped tin hydroxide colloid precipitates have been synthesized by hydrolysis of SnCl4 and SbCl3 using: (1) an ion-exchange hydrolysis to remove chlorine ions, and (2) isoamyl acetate as an azeotropic solvent to obviate water. The obtained dried powder is of high dispersivity without any need for further grinding. The size and dispersivity of the final particles are investigated with the aid of TG-DTA, BET, XRD and TEM. After having calcined, the antimony-doped tin oxide nanopowder possesses a tetragonal rutile structure with high dispersivity, uniform particles and low hard agglomeration.     

Effects of Mo on the Microstructure and Hydrogen Sorption Properties of Ti-Mo Getters

The effects of Mo on the microstructure evolution, porosity and hydrogen sorption properties of Ti-Mo getters are investigated in this work. The results show that the addition of Mo prolongs the densification process of Ti-Mo getters and results in a significant amount of sintered pores. With the Mo content increasing, the porosity of getters firstly increases reaching the maximum value as it at- tains about 7.5wt.%, and then drops. At the room temperature, the hydrogen sorption property of getters increases progressively with the Mo content increasing, but the tendency is not very clear before its content lies below 2.5wt.%. When the Mo content achieves about 7.5wt.%, the hydrogen sorption property proves to be the best. The discussion is made about the above mentioned phenomena inclusive of hydrogen sorption properties of getters under different activation conditions (from 500-750 ℃).     

超声速燃烧数值模拟中的湍流与化学反应相互作用模型

高精度数值模拟有助于理解超声速湍流燃烧中湍流与化学反应的相互作用,可为发动机燃烧室等工程应用设计提供可靠的预测模型。除直接数值模拟外,目前在湍流燃烧应用中使用的大涡模拟和雷诺平均Navier-Stokes模拟均需要借助模型模化发生在湍流小尺度上的流动与化学反应过程对湍流大尺度运动的影响。现有的湍流与化学反应相互作用模型大致可分为:火焰面类模型和概率密度函数类模型,2类模型在不同的应用中各自具有优势和局限性。此外,现有模型大都基于低马赫数燃烧,而超声速燃烧中通常会伴随快速混合、局部熄火和再着火以及激波等复杂过程,这为发展其中的湍流与化学反应相互作用模型提出了更多的挑战。     

适于低轨卫星IP网络的单核共享树组播算法(英文)

为了解决低轨卫星IP网络中现有典型源组播算法的信道资源浪费问题,本文提出了一套单核共享树组播算法,即核心群合并共享树(CCST)和加权核心群合并共享树(w-CCST)算法。CCST 算法包括动态近似中心(DAC)选核方法和核心群合并组播路径构建方法。DAC方法专为周期、规律运动的低轨卫星网络提出,不需要复杂的星上计算。在核心群合并方法中,以核节点作为初始核心群,通过核心群和剩余组成员的最短路径方法逐步扩展直至整棵组播树构建完成,从而使得组播树的树代价最小,大大提高了网络的带宽利用率和组播传输效率。w-CCST 算法中所提出的加权因子可以调整树代价和端到端传播时延之间的折衷程度,因此,可以通过调整加权因子来适度增大树代价、降低端到端传播时延以支持某些端到端时延要求苛刻的实时组播业务。最后,与低轨卫星 IP 网络中典型算法进行了性能比较,仿真结果说明,CCST 算法的平均树代价比其它算法显著降低,w-CCST 算法的平均端到端传播时延小于 CCST 算法。     

Jet Vectoring Control Using a Novel Synthetic Jet Actuator

A primary air jet vectoring control system with a novel synthetic jet actuator (SJA) is presented and simulated numerically. The results show that, in comparison with an existing traditional synthetic jet actuator, which is able to perform the duty of either “push” or “pull”, one novel synthetic jet actuator can fulfill both “push” and “pull” functions to vector the primary jet by shifting a slide block inside it. Therefore, because the new actuator possesses greater efficiency, it has potentiality to replace the existing one in various appli- cations, such as thrust vectoring and the reduction of thermal signature. Moreover, as the novel actuator can fulfill those functions that the existing one can not, it may well be expected to popularize it into more flow control systems.     

Nonlinear Adaptive Slewing Motion Control of Spacecraft Truss Driven by Synchronous V-gimbaled CMG Precession

The slewing motion control of a truss arm driven by a V-gimbaled control-moment-gyro (CMG) is a nonlinear control problem. The V-gimbaled CMG consists of a pair of gyros that must precess synchronously. The moment of inertia of the system, the angular momentum of the gyros and the external disturbances are not exactly known. With the help of feedback linearization and recursive Lyapunov design method, an adaptive nonlinear controller is designed to deal with the unknown items. Performance of the proposed controller is verified by simulation.     

An SOR Implicit Time-accurate Scheme in Calculating Unsteady Flows

A new time-accurate marching scheme for unsteady flow calculations is proposed in the present work. This method is the combination of classical Successive Over-Relaxation (SOR) iteration method and Jacobian matrix diagonally dominant splitting method of LUSGS. One advantage of this algorithm is the second-order accuracy because of no factorization error. Another advantage is the low computational cost because the Jacobian matrices and fluxes are only calculated once in each physical time step. And, the SOR algorithm has better convergence property than Gauss-Seidel. To investigate its accuracy and convergency, several unsteady flow computa- tional tests are carried out by using the proposed SOR algorithm. Roe’s FDS scheme is used to discritize the inviscid flux terms. Un- steady computational results of SOR are compared with the experiment results and those of Gauss-Seidel. Results reveal that the numerical results agree well with the experimental data and the second-order accuracy can be obtained as the Gauss-Seidel for unsteady flow computations. The impact of SOR factor is investigated for unsteady computations by using different SOR factors in this algorithm to simulate each computational test. Different numbers of inner iterations are needed to converge to the same criterion for different SOR factors and optimal choice of SOR factor can improve the computational efficiency greatly.