共查询到20条相似文献,搜索用时 15 毫秒
1.
2.
在虹膜识别系统中,质量较差的虹膜图像可能被系统拒识,导致身份识别或身份认证的失败.因此有必要在虹膜图像的采集端引入质量评价环节,从虹膜图像采集仪输出的视频序列中挑选出符合识别系统要求的虹膜图像.为了减少序列图像质量评价的时间,根据图像的性质,对输入的序列图像进行步进式质量评价,不同的阶段设置不同的门限,只有满足要求的图像才能进入下一阶段的评价,这样将大大减少进行全部步骤评价的图像数量,能有效缩短序列图像评价的时间,保证了选取图像的质量和速度.试验结果表明,该算法能够有效地选择符合质量要求的虹膜图像. 相似文献
3.
航空发动机涡轮叶片工业CT图像降噪方法 总被引:1,自引:1,他引:0
在分析航空发动机涡轮叶片工业计算机层析成像(computed tomography,CT)图像自相似性特点基础上,讨论了一种基于图像不同区域相似性的非局部平均降噪算法,首先采用高斯加权欧式距离算子计算同一图像中不同区域间的相似性,然后对具有较强相似性的区域进行叠加平均,从而降低噪声,同时保持图像边缘的对比度.针对非局部平均算法计算复杂度高、计算量大的问题,研究了一种基于傅里叶变换的非局部平均降噪加速算法,以欧式距离算子替代高斯加权欧式算子提高相似性的计算效率,减少计算时间.实验结果表明,在保证航空发动机涡轮叶片工业CT图像降噪效果的情况下,处理速度提高了4倍以上. 相似文献
4.
5.
基于商业以太网技术的AFDX网络,具有高带宽,低延迟,强实时性,高可靠性的特点已应用于在空客A380等型号上。ARINC664 Part7协议定义了AFDX网络的终端系统,交换机,以及通信机制。其中AFDX网络终端系统(ES,EndSystem)为航电系统上层应用与AFDX网络之间提供信息收发的通道。基于ARM9的AFDX—ESSoC是国内首款AFDX终端系统智能协议芯片,结合项目实践以SoC验证方法学为指导,以应用需求和ARINC664 Part7协议标准为依据,介绍了在FPGA环境下搭建验证平台,开发测试向量实施验证的过程,并对验证结果进行了分析,为成功流片提供了可靠保证。 相似文献
6.
基于红外热像技术的涡轮叶片损伤评价研究进展 总被引:1,自引:0,他引:1
主动红外热像技术作为一种新型无损检测手段,具有高效率、无污染、易操作等特点,适合用于材料表面和近表面缺陷检测,因此在叶片类薄壁零件损伤评价方面有一定优势。当前基于主动红外热像无损检测技术的高温涡轮叶片损伤评价研究主要集中于热障涂层厚度检测、涂层脱粘检测、涂层界面处热生长氧化物检测以及叶片基体疲劳裂纹检测4个方面。但现有研究仍然面临热激励理论不完善、红外热像仪识别精度不够高以及热图处理方法有待改进等主要问题和困难。随着这些理论问题和技术困难的解决,主动红外热像技术呈现出人工识别缺陷向自动识别发展、定性检测向定量检测发展的趋势。总体而言,该技术未来在涡轮叶片损伤评价方面具有较大的应用潜力。 相似文献
7.
8.
SUSAN角点检测和匹配算法在高温变形测量中的应用 总被引:1,自引:0,他引:1
高温变形测量是材料力学性能实验方法研究中的重点和热点之一。为了能够实现在高温环境下精确地进行变形测量,将最小核值相似区(SUSAN)角点检测和光流跟踪匹配技术应用到位移和应变测量方面,设计了基于SUSAN角点特征的高温变形测量算法。该算法充分发挥了SUSAN角点特征的优点,具有测量精度高、抗干扰能力强等优点。在普通环境下,经过模拟散斑图数据的验证,利用该算法进行变形测量,误差在1%以内,精度高、稳定性好。通过高温力学实验发现,该算法能够适用于高温变形测量。本研究扩展了图像识别等技术在非接触测量技术中的应用。 相似文献
9.
车牌识别技术(LPR)是智能交通(ITS)领域的重要研究课题之一。车牌的自动识别分为车牌检测、字符分割、字符识别三个主要部分。车牌检测是LPR中的关键技术。车牌图像由于受到噪声、车牌倾斜、光照不均、运动模糊等的影响,检测存在着很大的困难。因此,在总结前人检测算法的优点和缺点的基础上,提出了基于adaboost算法的检测算法,其优点是检测率高,检测时间少,适应性特别强。 相似文献
10.
Sanchez-Reillo R. Gonzalez-Marcos A. 《Aerospace and Electronic Systems Magazine, IEEE》2000,15(2):45-48
An access control system that joins the uniqueness of biometric verification, as well as the storage security and processing capabilities of smart cards, is defined here. The biometric technique chosen has been hand geometry, which is considered to provide low/medium security (there are other much more secure, as fingerprint, iris or retina), to be easy to use, to achieve high acceptance by users, and which performance is given throughout fast processing and medium cost. Also, the small template size needed for each user is positive for storage and processing capabilities required in the system. But the innovation in the system proposed is that the smart card not only stores the user's template, but also performs the verification process with the features set by the terminal to the card. With this improvement, the security of the system has risen because the template is never extracted from the card, avoiding duplication of such sensible data. The specifications for the enrolment process will be presented as well as the applications where this new system is recommended 相似文献
11.
针对传统的双参数恒虚警率(Constant False Alarm Rate,CFAR)算法存在的虚警率高、实现过程繁琐、算法执行效率低等问题,提出了一种改进型的CFAR检测算法。该算法根据SAR图像的统计直方图,对可疑的目标像素进行预筛选,再用2个滑动窗口对像素进行判别。改进型的CFAR检测算法简化了原检测算法的结构,降低了检测结果的虚警率,提高了算法的计算效率,并在国际公开的雷达数据集上进行软件与DSP硬件的应用验证,测试表明该算法的有效性。 相似文献
12.
基于3σ法的卫星共视时间传递算法设计 总被引:1,自引:0,他引:1
卫星共视算法作为高精度时间传递技术之一,具有设备简单、成本低廉和可连续运行等优点.在详细分析卫星共视时间传递设备中的数据工作过程的基础上,提出了利用莱特准则对数据进行处理,以解决由模型所带来的残差问题,同时减轻系统数据处理的负担.通过对实测数据的验证,该算法简单实用,大大减低了站间钟差的均方根值,提高了时间比对精度. 相似文献
13.
针对暗弱空间环境中空间碎片的识别问题,提出了一种光照不均匀环境中的空间碎片识别方法。不同于现有识别方案,该方法从光照不均匀导致空间碎片图像源细节丢失造成识别性能下降的角度出发,首先将空间碎片的红外和可见光图像进行深度融合,并建立空间碎片融合图像数据库,然后基于训练样本采用深度学习技术训练得到空间碎片识别模型。算法分析表明,该图像融合方案具有高度的细节保留能力,识别模型具有在暗弱环境中高精度目标识别能力。最后进行了仿真实验,实验结果表明,该识别方案在姿态变化、图像源亮度变化等干扰条件下都具有较好的鲁棒性。 相似文献
14.
15.
随着微小型无人机(UAV)在航拍、测绘、环境监测、快递投送等民用领域的广泛应用,对微小型无人机的可用性和可靠性提出了更高的要求。为了使微小型无人机能够精确地完成自主降落,由于计算机视觉部署成本低、独立性强、信息丰富等特点,提出了通过识别匹配一种多层嵌套二维编码的阶层降落标识来进行相对定位的算法,并展示了与之对应的阶层标识检测及定位的无人机自主降落系统,由于编码的信息量与其他系统相比,具有高低空的高识别率、编码空间大等特点,故此系统可同时支持单个或多个停机坪的配置,且成本低廉,无需添加机载设备成本。最后对该系统进行仿真验证和实飞测试,表明所提出算法能够有效地实现无人机全自主降落。 相似文献
16.
17.
18.
Correlator technique has been used in pattern recognition applications. We introduce a correlation performance measure, peak to background ratio (PBR), defined as the ratio of the peak intensity to the average background variation in a single correlation output. Using this performance measure, we analyze the binary correlator and show that the binarization of the images can result in better performance. We consider a real-time implementation of the binary correlator, using VLSI technology. The analytical results are supported by computer simulations. 相似文献
19.
The automatic determination of local similarity between two images (image registration) is one of the most fundamental problems of image processing and pattern recognition. A class of registration algorithms that are reasonably efficient and robust for translational displacement has been considered to determine relative shift between reference and search images. Stochastic image models defined on a rectangular region of support are used to determine feature vectors associated with reference and search images. A new measure, namely, coefficient of variation, is defined to take into account effects of contrast and sharpness of the images. Based upon this measure, a computationally efficient two-stage algorithm is obtained by combining the image-model based algorithm with a template matching technique. Simulation results with several synthetic and real images are presented to evaluate the performance of the algorithms. 相似文献
20.
《中国航空学报》2020,33(5):1494-1504
Adapter ring is a commonly used component in non-cooperative satellites, which has high strength and is suitable to be recognized and grasped by the space manipulator. During proximity operations, this circle feature may be occluded by the robot arm or limited field of view. Moreover, the captured images may be underexposed when there is not enough illumination. To address these problems, this paper presents a structured light vision system with three line lasers and a monocular camera. The lasers project lines onto the surface of the satellite, and six break points are formed along both sides of the adapter ring. A closed-form solution for real-time pose estimation is given using these break points. Then, a virtual structured light platform is constructed to simulate synthetic images of the target satellite. Compared with the predefined camera parameters and relative positions, the proposed method is demonstrated to be more effective, especially at a close distance. Besides, a physical space verification system is set up to prove the effectiveness and robustness of our method under different light conditions. Experimental results indicate that it is a practical and effective method for the pose measurement of on-orbit tasks. 相似文献