磁性薄膜电磁参数测试技术

介绍了近15年国内外在磁性薄膜材料电磁参数测试方法的概况及技术特点,这些方法主要包括带状线法、微带线法、波导法及共面波导法、终端阻抗及短路法和谐振腔法。     

MEMS Electronically Steerable Antennas for Fire Control Radars

Large apertures are of great benefit to applications that are prime powered limited as is found on aerostat and other airborne platforms. Electronically scanned array antennas are often proposed for these applications. However, increasing the aperture area with conventional array technology is met with prohibitive cost, weight, and prime power increases because of the dense spacing of phase shifters and/or active T/R modules. This discusses the recent development of RF MEMS (Microelectromechanical System) switch technology and the use of these switches in a Radanttrade lens configuration for arrays of approximately 10 m² at X-band. A proof-of-concept 0.4 m² MEMS Electronically Steerable Antenna (ESA) containing 25,000 MEMS switches has been successfully designed, fabricated, and tested. The 0.4 m² MEMS ESA was then integrated with an AN/APG-67 radar system to form the MEMS Demonstration Radar System. The MEMS Demonstration Radar System successfully detected both airborne and ground moving targets during a series of extensive radar demonstrations. This is believed to be the first large scale employment of MEMS switches in a scanning antenna and radar system. The low-cost, lightweight, and low power technology demonstrated can enable weight and power constrained platforms with electronic steering.     

机载天线电磁兼容及布局分析

讨论机载天线电磁兼容及布局优化分析的数学模型。介绍了低频区、谐振区及光学区机载天线辐射场、电磁干扰余量的求解法。利用电磁干扰余量对机载天线电磁兼容（ＥＭＣ）问题进行了分析和求解,从而确定无线布局问题,给出了天线布局设计的流程图,并以机载微带共形天线为例,求解了其增益分布图和两微带天线元之间的电磁干扰余量。     

基于组件网络方法的微加速度计建模与仿真

 提出多端口组件网络方法对MEMS 进行建模与仿真, 建立了惯导MEMS 典型功能结构部件的参数化多端口组件模型, 联结组件模型形成网络构建了蟹腿式微加速度计的系统模型。用硬件描述语言作为编码工具, Saber 作为平台对该微加速度计模型进行了仿真分析。研究表明, 采用多端口组件网络可以实现M EMS 整体行为的快速仿真, 并能分析局部尺寸参数对系统性能的影响。与有限元分析相比较, 微加速度计系统模型仿真得到的检测方向的固有频率误差小于1.0%; 仿真结果表明梁的宽度变化对系统灵敏度有较大影响, 故需要尽量减小梁宽的加工误差。借助该模型还研究了系统对正弦及脉冲输入信号的响应特性。     

分级式航空电子综合化仿真系统研究

介绍一个分级式航空电子综合化仿真系统。该系统以航空电子综合化工程中一个分系统为仿真目标,由两层双余度1553B总线和MBI(multiplex bus interface)将AVS(Avionics simulator)、SSCU(subsystem control unit)、若干个EQS(equipment simulator)以及部分真实设备连成的三级分布式计算机系统。一个面向实时控制的分布式操作系统和相应的仿真软件分布在三级仿真器中;其中,分布式操作系统实现两级总线的衔接、通信控制、并行多任务管理、错误检测、故障处理和实时内存数据库管理,仿真软件模拟航空电子上层环境、操作员控制与显示、分系统各设备数据产生与接收数据处理以及信息处理应用任务。系统研制成功为工程化实现打下了技术基础并提供了一个实验环境。     

速率检测中新型定角脉冲产生电路

介绍了一种用于转台速率检测的新型定角脉冲产生电路,详细说明了其工作原理和性能,并给出了实测结果。     

微带电路和天线的时域仿真

介绍了运用FDTD设计和分析微带电路和天线的基础理论,分析了误差产生的原因。利用FDTD法分别对微带传输线、矩形微带贴片天线和微带分支耦合器进行了仿真和特性分析。     

矩形波导远区散射场的光学分析

将高频光学法与广义散射矩阵技术相结合,分析计算了矩形波导在终端短路和终端介质材料两种状态下的远区电磁散射,计算与实测结果吻合较好,且优于维特的计算结果。本方法可用于飞行器进气道和尾喷管电磁散射特性的分析。     

Neural control of smart electromagnetic structures [patch antennas]

Smart electromagnetic structures (SEMS) are capable of interacting with the surrounding electromagnetic field and responding to it. A system is “smart” when it integrates sensing, processing, and control elements (e.g. antennas, neural networks, diodes) in an autonomous manner. A SEMS capable of tuning frequency autonomously is described. Data are presented showing that the system can extend the useable bandwidth of a microstrip patch antenna in a frequency hop environment to more than twice the static value     

基于HLA的分布交互仿真模拟器的实现

高层仿真框架(HLA)是从DIS发展而来的新一代分布式交互仿真的体系结构。文中给出了基于HLA体系结构的分布式交互仿真模拟器的总体技术方案,在系统组成、硬件结构、软件结构、基于HLA的模拟器仿真引擎、视景仿真系统等方面进行了详细的论述。     

Single-phase power-factor-correction AC/DC converters with threePWM control schemes

Three pulse-width modulation (PWM) control schemes for a single-phase power-factor-correction (PFC) AC/DC converter are presented to improve the power quality. A diode bridge with two power switches is employed as a PFC circuit to achieve a high power factor and low line current harmonic distortion. The control schemes are based on look-up tables with hysteresis current controller (HCC) to generate two-level or three-level PWM on the DC side of diode rectifier. Based on the proposed three control schemes, the line current is driven to follow the sinusoidal current command which is in phase with the supply voltage, and two capacitor voltages on the DC bus are controlled to be balanced. The simulation and experimental results of a 1 kW converter with load as well as line voltage variation and shown to verify the proposed control schemes. It is shown that unity PFC is achieved using a simple control circuit and the measured line current harmonics satisfy the IEC 1000-3-2 requirements     

大型训练模拟器网络系统设计

大型训练模拟器是一个典型的分布式仿真系统(DIS),计算机网络系统是其核心组成部分。文中介绍了一种采用两级网络结构的设计方案．详细说明了网络系统的软硬件组成和控制方式,并说明了HLA标准在系统中的作用。     

飞行模拟器中的虚拟声音建模与实时渲染技术

虚拟声音的建模与渲染是飞行模拟器虚拟环境仿真中的关键技术,结合物理、心理、建筑、室内声学以及数字音响艺术等多门学科,提出适用于分布式飞行模拟器虚拟仿真系统的离线综合声音建模与动态均衡渲染算法,经过数字压限器、扩展器以及激励器等环节,将大规模音频数据根据虚拟权重进行离线重构;运用五段等响折线法,并结合心理声学构建了基于大规模音源的动态压缩比算法;结合座舱虚拟环境的等效吸声系数算法和混响时间算法;综合功率谱密度函数与特性共振峰,总结出与一系列状态量对应的幅频特性,应用前馈(BP)网络算法对数字均衡器进行实时调参,实现了发动机推力噪声的动态数字音频实时渲染;并基于Direct Sound的音频特效程序接口开发了一套基于高层体系结构(HLA)的分布式飞行模拟器实时音效系统,仿真结果验证了声音建模与渲染算法的有效性。     

Architecture of a training simulator based on distributedprocessing

The potential abilities of micro-computers make it possible that low cost training simulators are available. Distributed processing is an effective way for implementation of this kind of simulator. This article presents a training simulator architecture based on distributed processing and discusses its role in the training simulation support system     

A computing model and its experimental testing for an evaluation of electromagnetic interferences created by interfering circuits on transmission or high-voltage lines above a dissipative ground

In this paper we present useful calculations for a prediction of the electromagnetic field created by interfering circuits on a linear horizontal transmission line over an imperfectly conducting ground. The interfering circuits are assimilated to antennas and treated by using the dipole-radiation theory. The current distribution is determinated by the transmission-line theory. We present here the computational procedure allowing a fast and accurate calculation of the electromagnetic fields components of a series of dipoles. We give the linear characteristics Z, Y of the transmission line by incorporating the ground effects. The response of a terminated one-wire transmission line set over the ground and excited by a non-uniform field is given. A comparison between computed results given by the model and experimental measurements is provided.     

新型畸变流场模拟装置

阐明了发动机进口畸变流场模拟方面技术革新的重要性与迫切性，提出一种新型畸变流场模拟装置，给出了它的设计思想、原理结构、工作特点，试验结果。     

防滑刹车控制盒的电磁兼容性设计

介绍了防滑刹车控制盒在设计中既要考虑可靠性的需求,同时也要满足电磁兼容性的指标,从电磁场与传输线,电涌冲击,屏蔽、滤波和接地,印刷电路板中的电磁兼容性等方面进行了深入的探讨,解决了相关问题.     

航天器交会对接模拟系统逼近过程自抗扰控制

航天器交会对接地面模拟系统用于研究航天器交会对接过程的动力学、导航与控制等方面的相关问题。模拟器通过气浮轴承悬浮在大理石平台上来模拟太空的无摩擦微重力环境。通常情况下要保证大理石平台足够水平,由于实际平台不可能完全水平,模拟器的重力分量会使模拟器产生下滑现象,这种现象对大型地面模拟器设备尤为严重。针对模拟器的逼近过程设计了轨迹规划。为了减小测量信号噪声的影响,采用跟踪微分器(TD)对整个逼近过程中的测量信号进行滤波。针对逼近过程中模拟器存在下滑力等干扰问题设计控制器,通过扩张状态观测器(ESO)实时估计干扰量,进而对干扰量进行补偿。对模拟器冷喷气推力系统制定了推力器分配策略,采用脉冲宽度调制(PWM)技术实现对推力的近似等效。提出的控制方法应用于航天器交会对接地面模拟系统,实验结果表明所提出的控制方法能有效消除下滑力等干扰的影响。     

基于电化学沉积的高深宽比无源MEMS惯性开关的研制

基于电化学沉积技术在金属基底上制作了一种新型的无源MEMS惯性开关。针对高深宽比、细线宽微电铸用光刻胶模具制作过程中,由于SU-8胶膜严重侧蚀导致的胶膜制作困难、质量低下的问题,进行了紫外光刻试验研究。试验研究了不同曝光剂量和后烘时间对SU-8胶光刻效果的影响,优化了光刻工艺参数。采用降低曝光剂量和延长后烘时间相结合的方法解决了高深宽比、细线宽SU-8胶膜制作困难的问题,制作出高质量的微电铸用光刻胶模具。最后,在上述试验结果基础上制作了一种高深宽比、无源MEMS惯性开关。其外形尺寸为3935μm×3935μm×234μm,其中最细线宽12μm,单层最大深宽比达10∶1,多层最大深宽比达20∶1。     

扇面波导连续长槽宽带天线

介绍扇面波导宽曲面上连续长槽天线,终端接匹配负载。导出了辐射槽的衰减系数和长槽任意点偏离波导宽面中心线的距离公式,并用于设计Ｘ波段长的连续曲线槽天线,具有满意的性能,如全频带指标等。