论清代前期统一的深远影响

清代前期的统一，具有深远的意义：奠定了我国的版图，安定了北部疆域，减低了田赋、增加了人口，沟通了与中亚的交流，发展了农牧业生产，加强了民族融合与经济交往，推动了学术进步。在我们统一的多民族国家的历史上，产生了不可磨灭的影响。     

基于业务等级的自适应带宽分配机制及性能仿真

在现有带宽分配方法的基础上提出了基于业务等级的自适应带宽分配机制。首先描述了带宽分配方案,给出了系统模型并进行了数学分析。然后通过仿真实验讨论了该方案的性能和可行性。接着对原有的带宽分配机制作了进一步修改并进行了评价。最后对全文进行了总结并指出了今后的工作方向。     

复合材料帽形加筋结构稳定性研究

建立了复合材料帽形加筋结构的参数化有限元模型,给出了两种进行层板结合处的模拟计算方法,通过计算得到了模型的屈曲载荷并总结了加筋结构几何参数对结构稳定性的影响,给出了模型的收敛性分析,对比了模型网格密度对于计算结果的影响,找到最佳的网格密度,提高了模型计算的效率和准确性,为实际的结构设计提供了重要参考,为结构分析提供了依据。     

高精度ENO格式在喷管流动模拟中的应用

本文分析了ＥＮＯ格式的特点,并应用于Ｅｕｌｅｒ方程和全ＮＳ方程的迁移项和压力项,模拟了各种喷管流动。首先计算了ＪＰＬ喷管流动,取得了和实验一致的结果,分析了喷管内产生弱激波的原因;其次计算了非定常二维喷管流动,给出了相应的计算结果,并分析了壁面附近流场的拓扑结构;最后计算了摆动喷管的流动及推力矢量计算,取得了推力随摆角变化的规律,和实验结果表明基本一致。     

告别一个时代的传奇

马龙·白兰度病死在了医院里,好莱坞哭泣了,地球上的一些人失去了一位偶像,另一些人失去了一位老师,还有一些人失去了嫉妒的对象,剩下的人获知了一则头条新闻.     

武装直升机空战关键技术问题研究

本文论述了武装直升机空战的几个关键技术问题。首先建立了简化的武装直升机空战动力学和运动学模型,阐明了模型简化的具体方法;其次给出了直升机空战的结构图,并分析了空战的基本原理,同时简述了空战机动策略的选取原则,描述了直升机空战的基本特征;最后系统地说明了直升机空战中的航路规划技术,并提出了未来旋翼机的设想。     

微带线不均匀区的平面格林函数分析程序设计

讨论了微带线不均匀区的平面格式函数分析法,应用精确的计算公式编制程序,并考虑了高次模效应,分析了边缘场效应,引入了动态有效介电常数,提高了计算精度,同时给出了提高计算速度的方法。     

3.4377铝合金典型零件拉深成形

对3.4377铝合金材料典型零件的成形过程进行了分析。分析拉深成形原理,介绍了零件的特点,对零件成形时的应力应变情况进行了分析,详细介绍了所选零件的加工工艺流程,进行了该零件拉深成形的工艺参数计算和选择,确定了零件成形的模具结构以及拉深成形次数和每次拉深成形的深度,进行了工艺试验,确定了合适的成形过程参数,并对成形过程中所遇到的问题进行了分析研究,为以后该类材料的拉深成形提供了借鉴。     

热障涂层厚度涡流检测技术研究

利用涡流检测技术,确定了热障涂层(TBCs)中各部分材料的电磁特性.根据TBCs结构特点及材料的电磁特性,建立了TBCs理论模型,进行了模拟试验,分析了影响厚度测量的影响因素.制作了不同结构的TBCs试样,进行了测量试验,取得了较为满意的结果,并得到了涡流检测TBCs厚度的校准试样要求.     

触针式二维轮廓测量评定系统的改进

对触针式二维轮廓测量评定系统作了较大的改进:改进了测量方法和设备结构,提高了测量精度;设计了系统误差补偿算法,大大减小了由系统误差所造成的测量误差;提出了螺纹零件评定的新方法,简化了操作步骤,提高了评定结果的准确度;设计了轮廓对比功能,可将设计尺寸与被测轮廓进行整体对比,以判定被测零件是否满足设计要求。     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

Effects of Mo on the Microstructure and Hydrogen Sorption Properties of Ti-Mo Getters

The effects of Mo on the microstructure evolution, porosity and hydrogen sorption properties of Ti-Mo getters are investigated in this work. The results show that the addition of Mo prolongs the densification process of Ti-Mo getters and results in a significant amount of sintered pores. With the Mo content increasing, the porosity of getters firstly increases reaching the maximum value as it at- tains about 7.5wt.%, and then drops. At the room temperature, the hydrogen sorption property of getters increases progressively with the Mo content increasing, but the tendency is not very clear before its content lies below 2.5wt.%. When the Mo content achieves about 7.5wt.%, the hydrogen sorption property proves to be the best. The discussion is made about the above mentioned phenomena inclusive of hydrogen sorption properties of getters under different activation conditions (from 500-750 ℃).     

An SOR Implicit Time-accurate Scheme in Calculating Unsteady Flows

A new time-accurate marching scheme for unsteady flow calculations is proposed in the present work. This method is the combination of classical Successive Over-Relaxation (SOR) iteration method and Jacobian matrix diagonally dominant splitting method of LUSGS. One advantage of this algorithm is the second-order accuracy because of no factorization error. Another advantage is the low computational cost because the Jacobian matrices and fluxes are only calculated once in each physical time step. And, the SOR algorithm has better convergence property than Gauss-Seidel. To investigate its accuracy and convergency, several unsteady flow computa- tional tests are carried out by using the proposed SOR algorithm. Roe’s FDS scheme is used to discritize the inviscid flux terms. Un- steady computational results of SOR are compared with the experiment results and those of Gauss-Seidel. Results reveal that the numerical results agree well with the experimental data and the second-order accuracy can be obtained as the Gauss-Seidel for unsteady flow computations. The impact of SOR factor is investigated for unsteady computations by using different SOR factors in this algorithm to simulate each computational test. Different numbers of inner iterations are needed to converge to the same criterion for different SOR factors and optimal choice of SOR factor can improve the computational efficiency greatly.     

Nonlinear Adaptive Slewing Motion Control of Spacecraft Truss Driven by Synchronous V-gimbaled CMG Precession

The slewing motion control of a truss arm driven by a V-gimbaled control-moment-gyro (CMG) is a nonlinear control problem. The V-gimbaled CMG consists of a pair of gyros that must precess synchronously. The moment of inertia of the system, the angular momentum of the gyros and the external disturbances are not exactly known. With the help of feedback linearization and recursive Lyapunov design method, an adaptive nonlinear controller is designed to deal with the unknown items. Performance of the proposed controller is verified by simulation.     

适于低轨卫星IP网络的单核共享树组播算法(英文)

为了解决低轨卫星IP网络中现有典型源组播算法的信道资源浪费问题,本文提出了一套单核共享树组播算法,即核心群合并共享树(CCST)和加权核心群合并共享树(w-CCST)算法。CCST 算法包括动态近似中心(DAC)选核方法和核心群合并组播路径构建方法。DAC方法专为周期、规律运动的低轨卫星网络提出,不需要复杂的星上计算。在核心群合并方法中,以核节点作为初始核心群,通过核心群和剩余组成员的最短路径方法逐步扩展直至整棵组播树构建完成,从而使得组播树的树代价最小,大大提高了网络的带宽利用率和组播传输效率。w-CCST 算法中所提出的加权因子可以调整树代价和端到端传播时延之间的折衷程度,因此,可以通过调整加权因子来适度增大树代价、降低端到端传播时延以支持某些端到端时延要求苛刻的实时组播业务。最后,与低轨卫星 IP 网络中典型算法进行了性能比较,仿真结果说明,CCST 算法的平均树代价比其它算法显著降低,w-CCST 算法的平均端到端传播时延小于 CCST 算法。     

GA-Based Model Predictive Control of Semi-Active Landing Gear

Semi-active landing gear can provide good performance of both landing impact and taxi situation, and has the ability for adapting to various ground conditions and operational conditions. A kind of Nonlinear Model Predictive Control algorithm （NMPC） for semi-active landing gears is developed in this paper. The NMPC algorithm uses Genetic Algorithm （GA） as the optimization technique and chooses damping performance of landing gear at touch down to be the optimization object. The valve＇s rate and magnitude limitations are also considered in the controller＇s design. A simulation model is built for the semi-active landing gear＇s damping process at touchdown. Drop tests are carried out on an experimental passive landing gear systerm to validate the parameters of the simulation model. The result of numerical simulation shows that the isolation of impact load at touchdown can be significantly improved compared to other control algorithms. The strongly nonlinear dynamics of semi-active landing gear coupled with control valve＇s rate and magnitude limitations are handled well with the proposed controller.     

Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.     

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.     

(高)超声速流动试验技术及研究进展

近年来,与高速飞行器相关的(高)超声速流动受到了极大的关注。这类流动所具有的非定常性、强梯度和可压缩性对试验方法和风洞设计技术提出了挑战。超声速纳米示踪平面激光散射(NPLS)技术是由作者所在团队研发的非接触光学测试技术。它能够以较高的空间分辨率来揭示超声速三维流场的一个瞬态剖面的时间解析的流动结构。介绍了NPLS技术以及基于NPLS开发的密度场测量、雷诺应力测量和气动光学波前测量等方法,并回顾了这些技术在超声速边界层、超声速混合层、超声速压缩拐角、激波/边界层相互作用和光学头罩绕流等流动中的应用,清晰地再现了边界层、混合层、激波等典型流场结构及其时空演化特性。另外,为了模拟和研究高空大气条件下边界层自然转捩和超声速混合层的转捩特性,介绍了高超声速静风洞、超-超混合层风洞的设计技术以及层流化喷管的设计方法。