基于火卫二视线测量的火星接近段自主导航算法

针对火星接近段导航通信时延大、存在通信盲区、自主导航可用观测信息有限等问题,提出了一种基于一组火卫二相对探测器视线矢量测量的天文自主导航算法,每个导航周期测量一组火卫二视线矢量可得到其中某一时刻探测器的完整轨道信息的估计值,该方法不依赖于轨道渐近线方向等先验信息。考虑到存在火卫二和火星在同一视场的情形,此时结合火星中心视线矢量方向以及火卫二的星历信息可估计出精度较高的探测器轨道半径,作为第一种方法的补充观测量,提高导航精度。最后给出仿真校验,验证了该方法的导航精度和可行性,表明该方案能够满足未来火星探测接近段自主导航需求。     

“火卫1”轨道预报与动力学分析

使用数值积分的方法对\"火卫1\"(Phobos)轨道进行预报计算,介绍了计算\"火卫1\"轨道时考虑的动力模型与数值积分方法,分析了不同动力模型及参量对轨道计算结果的影响,并确定最终选择的模型。最后将计算结果与不同机构发布的最新历表进行比较,计算位置和轨道根数的差异。得到的结果与各星历之间差异的量级相同,进而验证了相关模型和算法的精度和可靠性。该轨道预报算法模型与分析结果将对\"火卫1\"探测任务提供参考。     

“嫦娥二号”小行星探测试验定轨计算与分析

嫦娥二号于2012-04-15开展对图塔蒂斯小行星的探测试验,至2012-12-13与图塔蒂斯交会,共飞行243 d,这是我国对小行星的首次探测.因为未安装星载导航设备,CE-2 在小行星探测试验的全过程均基于地基USB（Unified S-Band）与甚长基线干涉测量技术（VLBI,Very Long Baseline Interferometry）测量实现导航.对小行星探测期间的定轨计算及精度分析进行了讨论,对我国新建深空站的测量数据进行了分析.针对交会前最后一次轨道机动后,仅有13 d控后数据的现状,提出了快速轨道重建策略.计算结果表明该策略不仅可以有效改进定轨计算精度,还可以实现轨控速度增量的标定.基于重叠弧段的轨道分析比较表明,单独使用USB长弧数据计算可以获得10 km的定轨精度,综合USB与VLBI数据联合定轨,定轨精度可以提高1倍.     

月尘/月壤环境效应地面模拟方法研究

月壤/月尘会附着并污染航天器、月球车的表面,如果不及时清除,还会进一步诱发部件过热、机械机构卡死、密封失效、材料磨损等一系列问题.本文综述了关于月尘特性、月尘与航天器系统的互相作用机理、月尘环境模拟方法等方面的研究成果,提出了一种小型月尘环境模拟系统的设计方案.该系统将使关于月尘特性的实验研究成为可能,并可作为登月飞船及月球车材料选择、机械机构可靠性试验、除尘策略试验的平台.     

利用数字高程模型自动检测火星表面陨石坑

为了克服利用影像识别陨石坑的诸多限制因素,利用\"火星全球勘探者\"(MGS)火星激光高度计(MOLA)得到的火星三维DEM数据,转换获得地形曲率,然后利用设定阈值将曲率图转换为二值图像,结合图像分割floodin算法可以得到待检测陨石坑,最后利用Hough变换可以检测出陨石坑。其成功率达到73.4%,可以有效地从DEM中识别陨石坑。利用DEM识别陨石坑的方法可以识别更多新的陨石坑,为现存的陨石坑目录提供新的数据信息。     

Mars Phobos and Deimos Survey (M-PADS) – A martian Moons orbiter and Phobos lander

We describe a Mars ‘Micro Mission’ for detailed study of the martian satellites Phobos and Deimos. The mission involves two ∼330 kg spacecraft equipped with solar electric propulsion to reach Mars orbit. The two spacecraft are stacked for launch: an orbiter for remote investigation of the moons and in situ studies of their environment in Mars orbit, and another carrying a lander for in situ measurements on the surface of Phobos (or alternatively Deimos). Phobos and Deimos remain only partially studied, and Deimos less well than Phobos. Mars has almost always been the primary mission objective, while the more dedicated Phobos project (1988–89) failed to realise its full potential. Many questions remain concerning the moons’ origins, evolution, physical nature and composition. Current missions, such as Mars Express, are extending our knowledge of Phobos in some areas but largely neglect Deimos. The objectives of M-PADS focus on: origins and evolution, interactions with Mars, volatiles and interiors, surface features, and differences. The consequent measurement requirements imply both landed and remote sensing payloads. M-PADS is expected to accommodate a 60 kg orbital payload and a 16 kg lander payload. M-PADS resulted from a BNSC-funded study carried out in 2003 to define candidate Mars Micro Mission concepts for ESA’s Aurora programme.     

地外天体潜入式探测典型案例分析及展望

针对地外天体星壤剖面的潜入式探测任务,对星球表面热场、星壤剖面原位力学特性等科学目标探测的基本原理、实现方案和典型案例进行了资料调研与分析,并阐明了国际上开展地外天体星壤剖面潜入式探测活动的目的和科学意义。在此基础上,提出了我国月面采样科学目标拓展方案以及我国开展潜入式探测的预先研究规划,对蠕动掘进和冲击贯入式探测方案的基本原理和应用前景进行了分析。     

Production of high fidelity lunar agglutinate simulant

As space faring nations consider manned and unmanned missions to the Moon, there is a growing need to develop high fidelity lunar regolith simulants that can accurately reproduce the properties and behavior of lunar regolith. Such simulants will be employed to verify the performance of equipment, mechanisms, structures and processes to be used on the lunar surface. One of the significant limitations of current terrestrial-based simulants, such as the popular mare simulant, JSC-1A, is the lack of agglutinates. This paper investigates the production of a lunar mare agglutinate simulant based on JSC-1A. A modified plasma processing technique was used to expose the JSC-1A regolith simulant to high temperatures and transform it to predominantly a glassy phase. Detailed characterization results are presented to confirm that the agglutinate simulant material produced during this investigation reasonably satisfies the primary requirements of an agglutinate simulant such as amorphous/crystalline content, particle size, morphology, vesicular structure, chemistry, and presence of nanophase elemental Fe.     

一种基于多尺度边缘提取的陨石坑检测算法

针对星体表面的陨石坑可用于探测器的自主导航、障碍识别等任务,提出一种基于多尺度边缘提取的陨石坑检测算法。该算法首先利用高斯金字塔得到不同尺度的陨石坑图像;其次,针对不同尺度的陨石坑图像,利用EDPF边缘提取算法对陨石坑进行边缘提取,并连接关键边缘像素点为直线段来近似表示图像边缘;然后将具有相同偏转方向的边缘直线段连接成圆弧,并将有相似半径和中心的圆弧拟合成候选圆和椭圆;最后对候选圆、椭圆进行验证。该算法的优点在于,能够准确地检测出陨石坑,有较高的检测率,且对存在较多陨石坑的图像有较好的检测结果。     

Development of thermal sensors and drilling systems for lunar and planetary regoliths

We consider some novel concepts for thermal properties experiments aboard lunar landers or rovers, that may lead to an improved understanding of both the structure of the lunar near surface layers and the lunar thermal history. The new instruments could be developed using the experience and heritage from recently developed systems, like the Rosetta Lander thermal conductivity experiment MUPUS and existing designs used for terrestrial measurements of thermal conductivity. We describe shortly the working principle of such sensors and the main challenges faced when using them in the airless regolith layers of the Moon or other airless bodies. In addition new concepts to create appropriate drill holes for thermal and other measurements in the lunar regolith are discussed.     

月壤剖面冲击贯入式探测方案研究

以月壤剖面的原位探测为目标,提出一种利用土体结构侵彻原理的冲击式贯入器设计方案。重点阐述了冲击式贯入器的工作原理和机构实现方案,并开展多方案设计与分析。研制了原理样机并开展实验验证,证明利用冲击式贯入方法实现月壤剖面自动潜入的可行性,并对我国未来开展月壤剖面原位探测提出了相关建议。