共查询到20条相似文献,搜索用时 312 毫秒
1.
2.
3.
4.
封闭式喷雾冷却传热特性的实验与理论研究 总被引:2,自引:1,他引:1
喷雾冷却是一种高效的高密度热流散热方式,在空间热控领域具有重要的应用前景。本文基于液膜动力学、气泡动力学和传热学的基本原理,建立了描述喷雾冷却传热特性的理论模型,模型分析结果和实验结果吻合良好;利用实验研究和模型模拟相结合的方法,对以水作为工质的封闭喷雾冷却系统的加热面温度分布、冷却曲线等特性进行了分析,分析结果显示,在封闭式喷雾冷却系统中,被冷却表面也仍然存在着温度分布的不均匀性,但是其最大温差小于5℃;由于喷雾腔内压力较低,喷雾曲线基本上处于两相区内,其换热能力远远高于常压下的换热能力。 相似文献
5.
6.
7.
8.
空间热辐射器担负着航天器内部多余热量向外太空排散的任务,是航天器热控系统的关键设备,尤其是载人航天器,辐射器需要满足长寿命、高可靠度、高稳定性的要求,目前已发射的载人航天器均采用流体回路辐射器。对中国空间站流体回路/热管耦合式辐射器进行试验研究,得出辐射器散热性能的变化规律。首先论述试验方案和试验过程,并给出试验结果数据;然后通过对试验数据分析,得出辐射器传热热阻,以及散热能力随流体回路参数及外热流参数的变化规律;最后基于试验数据,完善辐射器仿真分析模型,并与试验典型工况进行对比分析,实现仿真模型与试验数据的良好吻合,仿真模型可用于辐射器在轨工作性能预示分析。实验分析结果对航天器空间辐射器设计具有一定的参考意义,可为航天器整舱热平衡试验方案及辐射器在轨工作状态设置提供数据支持。 相似文献
9.
碳基复合相变装置以高导热碳基复合相变材料为主要储能和导热载体,利用高导热膨胀石墨强化导热,运用相变材料的潜热实现热量的削峰填谷,可有效抑制短时大热耗单机的温升,减少单机非工作时段所需的补偿功耗,节省卫星的重量资源和功耗资源。主要介绍了一种高导热碳基复合相变装置,结合复合相变装置与卫星结构板优化的综合散热系统,用于解决星载短时工作的大热耗单机温度控制问题。通过理论计算与热仿真分析相结合,对复合相变装置进行了优化设计;通过开展专项试验对复合相变装置的热性能和空间环境适应性进行了充分验证;并在整星真空热平衡试验中,验证了复合相变装置对大热耗单机的温度控制效果。 相似文献
10.
为深入了解高温多相流环境中绝热材料烧蚀规律,以氧-煤油烧蚀试验系统为基础,采用氧化硼(B2O3)粉末为添加粒子,发展了一种用于绝热材料烧蚀性能测试的新方法,并进行了验证测试。结果表明:氧-煤油烧蚀试验系统的温度为500~2700 K,射流速度为200~1500 m/s,可通过调整燃烧室压力、烧蚀距离和粒子浓度等参数适应各种烧蚀工况;B2O3颗粒在高温射流中发生熔化、蒸发等相变,可用于模拟火箭发动机中的凝聚相粒子;验证试验中绝热材料的烧蚀率和烧蚀规律与其他多相流烧蚀试验结果相近。结果证明该装置可用于开展多相流环境下绝热材料烧蚀试验研究。 相似文献
11.
12.
为了优化多辐射器航天器热控流体回路布局,提高流体回路的散热效率,降低流体回路温度,本文基于(火积)理论,分别对多个辐射器串联和并联的流体回路布局的散热进行了分析。结果表明,排散相同热量时,流体回路的流体与管路壁面之间的温差均匀性越好,流体回路散热过程(火积)耗散越小,系统散热过程越优。进一步,对于2个辐射器的情况,分别对辐射器设置了不同的空间辐射加热热流,对辐射器的流体回路布局方式进行了比较。结果表明,辐射器与流体回路串联时,系统散热性能要优于两者并联,系统的流体温度水平最低,结果与(火积)理论分析的预测完全一致。研究结论对多辐射器的航天器热控流体回路设计具有指导意义。 相似文献
13.
14.
为提高航天器热控系统对轨道调整的适应能力,本文研究了与流体回路耦合的可展开式辐射器热控方案在不同轨道高度下的热控性能,分析了不同轨道高度时辐射器面临的热环境的影响,在不同轨道高度下比较了固定辐射器与可展开辐射器的热控特性。结果表明,随着辐射器展开角度的变化,辐射器吸收的空间热流随之发生变化,从而对热控系统的散热能力带来直接影响,调节辐射器的角度可以扩大其对外散热能力。在工程应用中,基于热控流体回路,通过调节可展开式辐射器的展开角度,可以有效提高航天器的轨道热适应能力。 相似文献
15.
16.
A relatively general formulation for studying liberational dynamics of a large class of spacecraft during deployment of arbitrarily oriented beam and plate type flexible members has been developed by the authors. The formulation is applicable to a variety of missions ranging from deployment of antennas, booms and solar panels to manufacturing of trusses for space platforms using the Space Shuttle. The governing nonlinear, nonautonomous and coupled equations of motion are extremely difficult to solve even with the help of a computer, not to mention the cost involved. To get some appreciation as to the complex interaction between flexibility, deployment and attitude dynamics as well as to help pursue stability and control analyses, the procedure is applied to the Space Shuttle based deployment of plate-like members. Results suggest substantial influence of the flexural rigidity of the appendages, deployment velocity, initial conditions, and appendage orientation on the system response. Deployment maneuvers in conjunction with a typical controlled time history of permissible liberational rates suggest flexible plate members to be stable. In general, the instability is triggered through roll excitation leading to unbounded yaw due to coupling. The results should prove useful in planning of the Orbiter based experiments aimed at studying dynamics and control of flexible, deployable structural components needed in construction of space platforms. 相似文献
17.
针对数量有限的物理跑车试验无法满足减振与保温性能测试需求的问题,提出一套航天器运输包装箱动力学与热学仿真验证方法,包括:建立适用于包装箱系统的刚柔耦合多体动力学系统,通过结合线路条件测试生成的动力学系统外部激励,实现减振性能虚拟跑车测试;建立基于计算流体力学的包装箱热学模型,通过模拟自然对流和空调控制,实现包装箱保温性能虚拟跑车测试;基于C/S架构和导航式流程设计思想,建立航天器运输包装箱仿真验证平台,通过实际案例证明该平台仿真结果与实际跑车测试数据具有较高的一致性。 相似文献
18.
19.
20.
An important unresolved problem in the attitude and shape control of future large flexible spacecraft is the determination of appropriate locations throughout the flexible vehicle for placement of control system actuators. In a separate work a definition of the degree of controllability was generated for this purpose when the control objective was to return the spacecraft to the desired equilibrium configuration after any disturbance. In some potential space missions the objective will require angular slewing maneuvers of a flexible structure. The optimum actuator locations should be significantly different for this objective. In this paper, concepts of the degree of controllability of a control system for performing standard maneuvers are developed from basic physical considerations, and then numerical methods for generating the degree of controllability are developed. These results offer the control system designer a method of evaluating the effectiveness of candidate actuator distributions. The method is shown to take on a relatively simple form when spacecraft modal coordinates are used. 相似文献