基于非线性运算的水下弱目标回波积累检测算法研究

为了有效地检测出淹没在背景噪声中的水下弱目标回波信号,建立高斯噪声和脉冲噪声背景下的水下弱目标多脉冲回波模型,并导出匹配滤波器的输出模型,提出基于非线性运算的目标回波积累检测算法,利用该算法检测淹没在背景噪声下的弱目标回波信号。结果表明,无论是高斯噪声还是脉冲噪声、静止目标还是匀速运动目标,该算法均能有效地检测出目标回波信号。     

基于点集合并的修正Hough变换TBD算法

在低信噪比条件下,基于Hough变换的检测前跟踪算法是进行强杂波背景下目标航迹检测的一种手段。本文针对Hough变换后一个目标产生多条可能航迹以及航迹内可能存在杂波点的问题,提出了一种基于能量最大点和点集合并的修正Hough变换检测前跟踪算法。该算法利用量测点时序、能量信息及目标速度先验信息对Hough变换后点迹进行关联和剔除,能够有效的对目标原始航迹进行回溯。针对高斯噪声背景下的飞行目标,仿真结果表明该算法能够对微弱目标进行有效检测,在目标数目、杂波密度、信噪比发生变化的条件下仍能保持较高的检测概率。     

一种提高脉冲雷达多普勒相位精度的方法

针对低信噪比条件下脉冲雷达模糊多普勒相位精度较低,可能导致相位测距时不能正确解相位模糊问题,基于EMD（Empirical Mode Decomposition,经验模式分解）区间阈值去噪方法,提出了一种新的提高多普勒相位精度的方法：利用EMD分解后各层信号的频率特性和能量特性,选取合适的阈值,并对各层信号进行区间阈值化处理,在提高信号信噪比的同时保持了信号的连续性.分别在回波信号噪声为高斯白噪声和AR（2）相关噪声的情况下,以及不同信噪比条件下,对该方法进行验证.仿真结果表明：在低信噪比条件下,当回波信号噪声为白噪声和相关噪声时,EMD区间阈值去噪方法能将回波信号信噪比提高5 dB,去噪性能优于小波阈值去噪方法,其对应多普勒相位精度能提高1倍以上.     

基于拖曳式干扰机的ISAR微动散射波干扰方法

通过对微多普勒效应的研究,提出了一种新的逆合成孔径雷达（ISAR）散射波干扰方法。将拖曳式干扰机和ISAR接收机分别等效为双基ISAR的发射站和接收站,干扰机对截获的ISAR信号进行微动信息调制并转发至目标,由其散射至ISAR接收机产生散射波干扰效果。干扰信号经ISAR接收机处理后可在真实目标回波成像结果附近产生假目标,且在方位向形成干扰条带。实验结果表明：通过控制干扰机转发参数及微动调制参数可分别实现不同的压制干扰效果。由于拖曳式干扰机与目标距离较近,干扰信号可获得较大功率,且与真实目标回波相参,可获得ISAR二维脉冲压缩处理增益,与传统射频噪声压制干扰方法相比成本较小。     

基于外辐射源直达波的对消及仿真研究

利用外辐射源（如调频广播、电视、GPS等的发射信号）的无源雷达探测技术一直是国内外研究的热点。在目标检测上,直达波信号的干扰不但对通道的动态范围提出了极高的要求,同时对微弱目标回波的检测构成了限制。文中利用二元阵的方法对直达波的干扰进行抑制,并对其对消性能进行了仿真分析和研究。     

基于Kalman滤波的高频CW电报信号自动识别

针对强噪声背景下高频CW电报信号检测算法性能严重下降、误码率较高的问题,文章提出一种基于卡尔曼滤波的高频CW电报信号同步检测识别算法。利用自同步法对CW电报信号实现位同步,进而利用卡尔曼滤波针对时变干扰噪声设置自适应阈值,对信号能量进行软判决,实现CW电报信号的自适应跟踪检测,提取有效信号进行识别。通过短波信道仿真软件和实际短波通信测试表明,该算法能够在强噪声背景下有效检测识别CW电报信号,且算法可由迭代实现。     

小波变换与SVD结合的射频信号消噪方法

射频信号因具备空间远距离传输特性被广泛应用于航天测控等领域,但空间磁场、信道、设备元器件等会引入大量噪声干扰,对射频信号的传播及后续分析处理造成影响。而目前关于射频信号消噪的研究很少,针对此问题,对比研究了传统滤波器消噪、小波阈值法及SVD(Singular Value Decomposition,奇异值分解)法在射频信号消噪方面的应用,仿真分析了各算法对有用射频信号的提取效果,从而发现3种方法均能起到噪声抑制的作用,但是,滤波器法明显会降低信号能量,小波变换法易使重构信号失真,而SVD法则运算时间较长。为此,提出将小波阈值法与SVD相结合,用于射频信号消噪。再通过比对各方法消噪的性能指标,验证了将2种方法结合,可有效提高运算效率及噪声抑制能力。     

基于子空间投影的未知背景航拍高光谱图像恒虚警目标检测

针对航拍高光谱图像中未知背景地物特征条件下小目标的检测问题,给出一种检测算法。利用目标的低概率特性,通过模糊聚类获取高光谱图像中背景的光谱特性;然后将高光谱数据向背景光谱信号的正交子空间及目标信号子空间投影以抑制背景和噪声信号;最后在特征层利用广义似然比检验构造出具有恒虚警特性的检测器,完成融合检测过程。理论分析和实验结果表明了算法的有效性。     

调频连续波合成孔径雷达噪声调相干扰

针对调频连续波合成孔径雷达的干扰问题,提出一种新型的噪声调相干扰方法,得到干扰噪声以高斯形式分布在真实干扰机回波目标周围,可用于遮盖分布式目标或区域。该方法利用噪声转发手段保持信号的相干性,调制指数和噪声功率决定干扰的覆盖范围,干扰效果基本不受侦察误差的影响,其相干干扰体制可获得部分的雷达二维处理增益。典型系统参数仿真实验验证了该干扰方法的有效性,在相同目标检测概率下,相较传统噪声压制干扰节省功率29.3dB。     

一种基于新三维随机Hough变换的航迹起始算法

针对雷达跟踪多目标时,目标点迹受杂波、噪声等因素影响,航迹起始难度大的问题,利用三维空间直线表示方法提出了一种4参数三维Hough变换算法.该算法是对传统二维Hough变换的拓展,它结合了传统的二维随机Hough变换理论,是一种新的三维随机Hough变换算法.通过该算法对理论数据和实测数据进行验证,结果表明,对于航迹区别较大的目标,该算法的航迹起始成功概率为98.5％;对于空间航迹相近的目标,该算法可成功将目标航迹从杂波中提取出来,虽然可能会出现航迹混淆,但利用目标先验信息可解决该问题,实现航迹起始.     

一种射频噪声干扰信号品质因素改进方法

针对射频噪声干扰信号直接限幅引起的干扰信号品质降低问题,分析了射频噪声干扰直接限幅造成的影响,在射频噪声干扰信号品质因素理论模型基础上,提出 1种基于双地址序列读取的射频噪声干扰信号品质优化方法。通过设置双地址寻址方式,改进基带噪声数据读取方式,提高限幅条件下的射频噪声干扰信号品质因素。仿真实验表明,该优化方法能够在直接限幅条件下提高干扰信号的品质因素,并基于 FPGA进行了硬件测试,验证了该方法的可行性。     

一种机动多目标雷达视频信号模拟器的设计

给出了一种机动多目标雷达视频信号模拟器的软硬件设计方案,它可实时输出所需的多个动目标雷达视频信号,雷达信号的类型、目标的数量、目标的回波特性、目标的运动特性、杂波的类型及参数等均可方便地进行设置。该模拟器可满足各种雷达信号处理算法(如杂波抑制、恒虚警检测、动目标跟踪、多基地数据融合等)的测试与效果分析,以及对雷达信号处理机等进行性能调试与测试的需要。     

A pre-generated matrix-based method for real-time robotic drilling chatter monitoring

Currently, due to the detrimental effects on surface finish and machining system, chatter has been one crucial factor restricting robotic drilling operations, which improve both quality and efficiency of aviation manufacturing. Based on the matrix notch filter and fast wavelet packet decomposition, this paper presents a novel pre-generated matrix-based real-time chatter monitoring method for robotic drilling. Taking vibration characteristics of robotic drilling into account, the matrix notch filter is designed to eliminate the interference of spindle-related components on the measured vibration signal. Then, the fast wavelet packet decomposition is presented to decompose the filtered signal into several equidistant frequency bands, and the energy of each sub-band is obtained. Finally, the energy entropy which characterizes inhomogeneity of energy distribution is utilized as the feature to recognize chatter on-line, and the effectiveness of the presented algorithm is validated by extensive experimental data. The results show that the proposed algorithm can effectively detect chatter before it is fully developed. Moreover, since both filtering and decomposition of signal are implemented by the pre-generated matrices, calculation for an energy entropy of vibration signal with 512 samples takes only about 0.690 ms. Consequently, the proposed method achieves real-time chatter monitoring for robotic drilling, which is essential for subsequent chatter suppression.     

Energy Detection of a Random Process in Colored Gaussian Noise

A likelihood receiver for a Gaussian random signal process in colored Gaussian noise is realized with a quadratic form of a finite-duration sample of the input process. Such a receiver may be called a "filtered energy detector." The output statistic is compared with a threshold and if the threshold is exceeded, a signal is said to be present. False alarm and detection probabilities may be estimated if tabulated distributions can be fitted to the actual distributions of the test statistic which are unknown. Gamma distributions were fitted to the conditional probability densities of the output statistic by equating means and variances, formulas for which are derived assuming a large observation interval. A numerical example is given for the case in which the noise and signal processes have spectral densities of the same shape or are flat. The optimum filter turns out to be a band-limited noise whitener. The factors governing false alarm and detection probabilities are the filter bandwidth, the sample duration, and the signal level compared to the noise. Two sets of receiver operating characteristic curves are presented to complete the example.     

An Adaptive Two-Dimensional Kalman Tracking Filter

A continuously adaptive two-dimensional Kalman tracking filter for a low data rate track-while-scan (TWS) operation is introduced which enhances the tracking of maneuvering targets. The track residuals in each coordinate, which are a measure of track quality, are sensed, normalized to unity variance, and then filtered in a single-pole filter. The magnitude Z of the output of this single-pole filter, when it exceeds a threshold Z1 is used to vary the maneuver noise spectral density q in the Kalman filter model in a continuous manner. This has the effect of increasing the tracking filter gains and containing the bias developed by the tracker due to the maneuvering target. The probability of maintaining track, with reasonably sized target gates, is thus increased, The operational characteristic of q versus Z assures that the tracker gains do not change unless there is high confidence that a maneuver is in progress.     

Adaptive Rectification Filter for Detecting Small IR Targets

Clutter suppression is one of the most important subjects in the field of small target detection under infrared (IR) strong clutter background. While removing the clutter background, however, such methods may reverse the relative energy distribution of target and noise in the clutter suppressed image, and disturb the subsequent target segmentation and detection. This paper analyzes the causation of such problems, does research on the relationship between target energy characteristics and detection probability, and presents a novel filter of energy distribution adaptive rectification (EDARF). Based on the EDARF, an improved framework of dim small target detection is proposed to rectify the energy distribution in the clutter-suppressed images by conventional adaptive filters. The proposed EDARF's performance is estimated by experimental comparisons of three linear/nonlinear filters before and after using EDARF. Extensive experimental results show that the proposed EDARF improves efficiently the performance of detecting dim small targets against strong undulant cloud-cluttered backgrounds.     

Null phase-shift polarization filtering for high-frequency radar

In order to effectively cancel the interference in polarization filtering, the parameters of the polarization filter should timely adapt to the variation of the polarization of the interference, which may impact the amplitude and phase of the desired signal that passes through the same polarization filter during the coherent integration time (CIT) and render the enhancement of the signal integration a failure. To avoid this, a null phase-shift polarization (NPSP) filter is proposed, which is composed of a linear polarization transformer (LPVT), a conventional single-notch polarization (SNP) filter and an amplitude/phase compensation device (A/PCD). The interference, which has polarization different from those of the desired target signal, can be suppressed completely while the target signal remains without distortion. Some applications of high-frequency (HF) radars for suppressing the radio interference are introduced. Simulation results from the experimentally derived data indicate that the improvement of the signal-to-interference ratio (SIR) can be expected to be more than 28 dB. The proposed NPSP filter is effective in HF radar or other coherent systems.     

基于广义S变换进行雷达信号时频滤波去噪

S变换自问世以来,凭借其优越性已经被广泛地应用于数字信号处理中。针对深空目标雷达回波信号的复杂性,为了得到较好的雷达回波信号,将基于广义S变换的时频滤波应用于雷达回波信号去噪中,并利用低通滤波器设计了时频滤波算子,克服了传统滤波去噪方法滤波因子不能随时间、频率变化而变化的缺陷。通过理论分析与仿真波形对比表明,滤波后能有效地去除噪声,很好地保留了原始雷达回波信号的信号特征,展示了基于广义S变换的时频滤波的可行性,为雷达回波信号去噪提供提供了一种很好的方法。