基于航迹质量评估的雷达和ADS-B数据融合方法

雷达和广播式自动相关监视系统（ADS-B）的数据融合是监视“黑飞”无人机和飞鸟等目标的有效手段,然而两种传感器跟踪性能差异较大且易波动,会带来融合精度下降问题。提出一种基于航迹质量评估的雷达和ADS-B 数据融合方法,首先量化评估局部航迹精度、数据更新次数和传感器测量误差对局部航迹质量的影响,其次综合计算局部航迹的质量加权因子,最后基于分布式融合结构完成异步航迹融合处理。结果表明：本文提出的融合处理方法能有效提高融合跟踪精度,在传感器跟踪性能出现波动的情况下,跟踪误差均优于传统航迹融合方法。实际工程应用中的融合效果也验证了本文方法有助于实现对低空合作和非合作式目标的综合监视。     

机载雷达目标跟踪与航迹信息提取

针对机动目标跟踪中航迹信息提取精度不高的问题,提出一种ECEF坐标系下基于交互多模型的多机协同跟踪算法。首先,各载机以ECEF坐标系为融合中心对目标量测进行无偏转换处理,以有效减小量测转换误差对目标跟踪的影响;然后,利用交互多模型的方法对目标进行融合跟踪,以进一步提高目标机动时的跟踪精度;最后,通过二次滤波的方法,来有效实现目标航迹信息的精确提取。仿真结果表明,该算法可较好地提高目标机动时的跟踪精度和航迹信息提取精度。     

基于傅里叶变换的航迹对准关联算法

研究了在组网雷达存在系统误差情况下的目标航迹关联问题,理论分析了雷达系统误差对目标航迹的影响,并将该影响表示为目标航迹的旋转和平移量。在此基础上,提出了一种基于傅里叶变换的系统误差配准前航迹对准关联算法,该算法将组网雷达的航迹数据看做为一种整体信息,采用傅里叶变换理论来估计和补偿组网雷达目标航迹数据到融合中心航迹数据的相对旋转量和平移量,将雷达网中雷达上报的目标航迹数据对准到融合中心,从而不依赖于估计雷达网系统误差,实现了误差配准前的航迹准确关联,能够为后端的系统误差配准提供可靠的关联目标航迹数据。     

基于改进的FCM和信息熵修正的航迹融合算法

在局部航迹信息质量不均衡条件下,选择所有局部航迹进行航迹融合的算法会造成系统航迹质量下降。为了提高跟踪性能,提出了一种基于改进的模糊C均值(FCM)和信息熵修正的航迹融合算法。通过交互式多模型(IMM)滤波后的航迹信息对聚类数据做“质量”修正,改进后的FCM算法对局部航迹进行聚类分析,利用信息熵和隶属度对局部航迹进行选择和融合,达到修正聚类中心和提高系统航迹质量的效果。仿真结果表明：当多个传感器跟踪机动目标时,在传感器的观测精度发生变化和存在量测丢失的情况下,该算法的跟踪性能优于已知的航迹融合算法。     

基于PTE的多雷达航迹融合算法

针对杂波背景下的多雷达航迹融合时局部估计误差互协方差矩阵未知的问题,提出基于目标存在概率（PTE）的航迹融合算法,提升了正确航迹率和跟踪精度。首先,通过综合概率数据关联得到单接收站的目标航迹估计集合和对应的目标存在概率。然后,在局部估计误差互协方差矩阵未知的条件下,基于PTE信息提出不带记忆的综合广义凸组合航迹融合算法。进而将前一帧的融合状态进行反馈,提出带记忆的综合广义凸组合航迹融合算法。仿真验证了所提算法的有效性。     

基于一致关联数最大化的航迹关联算法

航迹关联(TTTA)是多传感器数据融合系统的核心模块之一,是系统误差估计和航迹融合的前提和基础。传感器存在的固有系统误差使得目标位置状态估计与真值发生偏离,容易诱发TTTA错误。传统的基于全局最小距离准则的TTTA算法,需要获得较高精度的系统误差估计,来对航迹数据进行误差补偿。针对传感器具有系统误差环境下的TTTA问题,在对TTTA进行间接评估的基础上,定义了一致关联数的概念,提出了一致关联数最大化的TTTA准则,并在稳健交替迭代的框架下完成算法设计。与距离函数不同,一致关联数是一个离散量,放松了对系统误差估计精度的要求。最后,仿真实验验证了所提算法的有效性。     

一种基于最小二乘拟合的数据关联算法

针对点航关联在多目标跟踪中精度与实时性难兼顾的问题,提出了一种基于最小二乘拟合的点航关联算法。首先采用滑窗将历史航迹截断,采用最小二乘法在不同维度分别拟合、外推融合航迹历史信息条件下的航迹点,增加外推点的多样性及信息量。同时定义了5种全概率关联事件,提取传统滤波方法的预测点,将拟合外推点与滤波预测点融合,使归属判决更加准确。最后分别推导了不同事件发生时的状态更新方程与误差协方差更新方程,给出了其中参数的确定方法。经仿真数据验证,与经典的最近邻域法和联合概率数据互联算法相比,所提算法能够更好地兼顾精度与实时性,且计算复杂度较低,易于工程实现。     

基于虚拟目标点制导的误差分析

基于标准弹道确定的虚拟目标点位置在弹道小扰动的情况下能够确保闭路制导的精度,但是在弹道大扰动时,虚拟目标点位置修正误差变大,能否保证闭路制导的精度值得探讨。通过给弹道一个大扰动进行了弹道仿真,结果表明,弹道大扰动会引起闭路制导的方法误差变大。     

小型无人飞行器风场扰动自适应控制方法

针对小型无人飞行器在执行任务时传感器测量精度低、受风场扰动影响大的问题,提出了一种利用矢量域与滑模控制相结合的复合控制方式,有效地实现了对小型无人飞行器的轨迹与航向的自适应跟踪。将复杂航迹分解为直线段与圆弧段分别构建矢量域,从而确定基于位置误差的航迹信息,并通过机载传感器获得状态和位置信息,利用滑模控制方法抑制风场扰动对小型无人飞行器的影响。试验结果表明,本文提出的控制算法能够保证阵风干扰情况下小型无人飞行器的航迹控制精度,同时具有良好的动态响应。     

数据链航迹延迟与 ESM点迹间断融合跟踪

数据链与电子支援措施(Electronic Supporting Measures,ESM)融合跟踪是 1种典型的异类多传感器信息融合。针对数据链航迹存在延迟和 ESM点迹间断情况下的数据链航迹与 ESM点迹融合跟踪,提出了复杂情况下的数据链与 ESM融合跟踪方法,并对融合跟踪的精度进行分析研究。首先,对数据进行时间对准,保证数据链和 ESM数据率一致;然后,通过构造基于不敏变换(Unscented Transformation,UT)的非线性量测转换和误差估计方法,将数据链数据对准到 ESM数据;最后,通过引入随机补偿机制对数据链延迟进行补偿,并与 ESM数据进行关联融合。实验结果表明,有延迟补偿时的融合跟踪精度取决于延迟补偿均值与实际延迟的贴近程度。结果可为信息综合处理装备的发展和设计提供借鉴。     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.     

Preparation of Highly Dispersed Antimony-doped Tin Oxide Nano-powder via Ion-exchange Hydrolysis of SnCl4 and SbCl3 and Azeotropic Drying

Antimony-doped tin hydroxide colloid precipitates have been synthesized by hydrolysis of SnCl4 and SbCl3 using: (1) an ion-exchange hydrolysis to remove chlorine ions, and (2) isoamyl acetate as an azeotropic solvent to obviate water. The obtained dried powder is of high dispersivity without any need for further grinding. The size and dispersivity of the final particles are investigated with the aid of TG-DTA, BET, XRD and TEM. After having calcined, the antimony-doped tin oxide nanopowder possesses a tetragonal rutile structure with high dispersivity, uniform particles and low hard agglomeration.     

Effects of Mo on the Microstructure and Hydrogen Sorption Properties of Ti-Mo Getters

The effects of Mo on the microstructure evolution, porosity and hydrogen sorption properties of Ti-Mo getters are investigated in this work. The results show that the addition of Mo prolongs the densification process of Ti-Mo getters and results in a significant amount of sintered pores. With the Mo content increasing, the porosity of getters firstly increases reaching the maximum value as it at- tains about 7.5wt.%, and then drops. At the room temperature, the hydrogen sorption property of getters increases progressively with the Mo content increasing, but the tendency is not very clear before its content lies below 2.5wt.%. When the Mo content achieves about 7.5wt.%, the hydrogen sorption property proves to be the best. The discussion is made about the above mentioned phenomena inclusive of hydrogen sorption properties of getters under different activation conditions (from 500-750 ℃).     

超声速燃烧数值模拟中的湍流与化学反应相互作用模型

高精度数值模拟有助于理解超声速湍流燃烧中湍流与化学反应的相互作用,可为发动机燃烧室等工程应用设计提供可靠的预测模型。除直接数值模拟外,目前在湍流燃烧应用中使用的大涡模拟和雷诺平均Navier-Stokes模拟均需要借助模型模化发生在湍流小尺度上的流动与化学反应过程对湍流大尺度运动的影响。现有的湍流与化学反应相互作用模型大致可分为:火焰面类模型和概率密度函数类模型,2类模型在不同的应用中各自具有优势和局限性。此外,现有模型大都基于低马赫数燃烧,而超声速燃烧中通常会伴随快速混合、局部熄火和再着火以及激波等复杂过程,这为发展其中的湍流与化学反应相互作用模型提出了更多的挑战。     

适于低轨卫星IP网络的单核共享树组播算法(英文)

为了解决低轨卫星IP网络中现有典型源组播算法的信道资源浪费问题,本文提出了一套单核共享树组播算法,即核心群合并共享树(CCST)和加权核心群合并共享树(w-CCST)算法。CCST 算法包括动态近似中心(DAC)选核方法和核心群合并组播路径构建方法。DAC方法专为周期、规律运动的低轨卫星网络提出,不需要复杂的星上计算。在核心群合并方法中,以核节点作为初始核心群,通过核心群和剩余组成员的最短路径方法逐步扩展直至整棵组播树构建完成,从而使得组播树的树代价最小,大大提高了网络的带宽利用率和组播传输效率。w-CCST 算法中所提出的加权因子可以调整树代价和端到端传播时延之间的折衷程度,因此,可以通过调整加权因子来适度增大树代价、降低端到端传播时延以支持某些端到端时延要求苛刻的实时组播业务。最后,与低轨卫星 IP 网络中典型算法进行了性能比较,仿真结果说明,CCST 算法的平均树代价比其它算法显著降低,w-CCST 算法的平均端到端传播时延小于 CCST 算法。     

Jet Vectoring Control Using a Novel Synthetic Jet Actuator

A primary air jet vectoring control system with a novel synthetic jet actuator (SJA) is presented and simulated numerically. The results show that, in comparison with an existing traditional synthetic jet actuator, which is able to perform the duty of either “push” or “pull”, one novel synthetic jet actuator can fulfill both “push” and “pull” functions to vector the primary jet by shifting a slide block inside it. Therefore, because the new actuator possesses greater efficiency, it has potentiality to replace the existing one in various appli- cations, such as thrust vectoring and the reduction of thermal signature. Moreover, as the novel actuator can fulfill those functions that the existing one can not, it may well be expected to popularize it into more flow control systems.     

Nonlinear Adaptive Slewing Motion Control of Spacecraft Truss Driven by Synchronous V-gimbaled CMG Precession

The slewing motion control of a truss arm driven by a V-gimbaled control-moment-gyro (CMG) is a nonlinear control problem. The V-gimbaled CMG consists of a pair of gyros that must precess synchronously. The moment of inertia of the system, the angular momentum of the gyros and the external disturbances are not exactly known. With the help of feedback linearization and recursive Lyapunov design method, an adaptive nonlinear controller is designed to deal with the unknown items. Performance of the proposed controller is verified by simulation.     

An SOR Implicit Time-accurate Scheme in Calculating Unsteady Flows

A new time-accurate marching scheme for unsteady flow calculations is proposed in the present work. This method is the combination of classical Successive Over-Relaxation (SOR) iteration method and Jacobian matrix diagonally dominant splitting method of LUSGS. One advantage of this algorithm is the second-order accuracy because of no factorization error. Another advantage is the low computational cost because the Jacobian matrices and fluxes are only calculated once in each physical time step. And, the SOR algorithm has better convergence property than Gauss-Seidel. To investigate its accuracy and convergency, several unsteady flow computa- tional tests are carried out by using the proposed SOR algorithm. Roe’s FDS scheme is used to discritize the inviscid flux terms. Un- steady computational results of SOR are compared with the experiment results and those of Gauss-Seidel. Results reveal that the numerical results agree well with the experimental data and the second-order accuracy can be obtained as the Gauss-Seidel for unsteady flow computations. The impact of SOR factor is investigated for unsteady computations by using different SOR factors in this algorithm to simulate each computational test. Different numbers of inner iterations are needed to converge to the same criterion for different SOR factors and optimal choice of SOR factor can improve the computational efficiency greatly.