Techniques for fine gamma-ray burst spectroscopy

A better understanding of the origin of gamma-ray bursts requires a significant improvement in present detector sensitivity, particularly for fine line spectroscopy in the 5–200 keV energy range. This paper presents a critical analysis of some detectors which may be used to obtain high energy resolution measurements of photon spectra from cosmic gamma-ray burst sources.     

The chromosphere-corona transition zone above an active region

Intensities and profiles of ion emission lines between 1170 A and 1700 A from an active region on the Sun are measured from spectra obtained with the Naval Research Laboratory's High Resolution Telescope and Spectrograph - HRTS. The measurements provide simultaneous determination of line intensities, wavelength shifts and Doppler widths at 50 separate positions in the active region, with spatial resolution of 1 arc second and spectral resolution 0.07 A. Fine structure variation of intensities and gas flow velocities in the temperature range 20,000–200,000 K are determined. The density sensitive line pair I(1486 N IV)/I(1548 C IV) has been used to measure electron pressures. Derived emission measures imply filling factors of 0.05–0.1 to balance the divergence of conductive flux width radiative losses above 60,000 K.     

Near infrared studies of the massive X-ray binary 2S 0114+65

We present near-infrared spectroscopy of the massive X-ray binary 2S 0114+650. These observations covering the spectral range 1.08–2.35 μm span the region where Paschen and Brackett series recombination lines of hydrogen are expected to be seen, namely, Paβ , Brγ and Br 10–17 lines. The absence of any of these lines in emission supports earlier inferences that the optical component in 2S 0114+650 is unlikely to be a Be star but rather a B type supergiant. Near-IR photometry gives J = 8.78, H = 8.53 and K = 7.96; these values show marginal variations from earlier reported measurements.     

Comparison of OClO nadir measurements from SCIAMACHY and GOME

The scanning imaging absorption spectrometer for atmospheric chartography was launched successfully onboard ENVISAT on March 1, 2002. It observes the solar radiation transmitted and backscattered from the atmosphere and reflected from the ground in nadir, limb and occultation viewing modes. Chlorine dioxide (OClO), an important indicator for stratospheric chlorine activation, can be measured in the UV spectral range by differential optical absorption spectroscopy (DOAS).

First results of the DOAS retrieval of OClO slant column densities from the SCIAMACHY nadir measurements are presented and compared to measurements of the global ozone monitoring experiment (GOME), which has successfully measured OClO since 1995. While SCIAMACHY operates in the same orbit, it measures ≈30 min earlier than GOME and has an increased spatial resolution (30 × 60 km² compared to 40 × 320 km² for GOME).     

The infrared imaging channel of the IKS instrument for detection of Comet Halley nucleus

The imaging Channel of the IKS Instrument placed on board the Vega fly-by probes will perform measurements of the infrared emission of the central region of Comet Halley at distances in the 10⁴ ? 10⁵ km range. An encoding wheel analyses one spatial frequency of the infrared image during the whole fly-by. Inversion of this measurement will give low resolution brightness profiles of the nucleus and its immediate surroundings, in two wave-length bandpasses and in two directions of analysis.     

Evidence for large organic molecules in the diffuse medium using optical high resolution spectroscopy.

The Diffuse Interstellar Bands (DIBs) are absorption lines observed in the line of sight toward reddened OB stars. Their ubiquitous detection in space indicates chemically stable and abundant carriers. High resolution spectroscopy led to the detection of substructures in the line profiles of a few DIBs, indicating a gas phase molecular origin of the carriers. Line profile studies are useful tools to derive information on the band carriers nature. In this paper we compared the velocity structure of the lambda 6613 angstroms DIB line profile to the NaD1 and CaII profiles toward 6 targets of the Perseus OB2 association.     

Mapping the earth's magnetic and gravity fields from space: Current status and future prospects

Orbital potential field measurements are sensitive to regional variations in earth density and magnetization that occur over scales of a few hundred kilometers or greater. Global field models currently available are able to distinguish gravity variations of ±5 milligal over distances of ～1,000 km and magnetic variations of ±6 gamma over distances of ～300 km at the earth's surface. Regional variations in field strength have been detected in orbital measurements that are not apparent in higher resolution, low altitude surveys. NASA is presently studying a spacecraft mission known as GRAVSAT/MAGSAT, which would be the first satellite mission to perform a simultaneous survey of the earth's gravity and magnetic fields at low orbital altitudes. GRAVSAT/MAGSAT has been proposed for launch during the latter nineteen-eighties, and it would measure gravity field strength to an accuracy of 1 milligal and magnetic field strength to an accuracy of 2 gamma (scalar)/5 gamma (vector components) over a distance of roughly 100 km. Even greater improvements in the accuracy and spatial resolution of orbital surveys are anticipated during the nineteen-nineties with the development of potential field gradiometers and a tethered satellite system that can be deployed from the Space Shuttle to altitudes of 120 km above the earth's surface.     

Field and wave measurements aboard the Aureol-3 spacecraft

In the Soviet-French Arcad-3 project, 3 experiments TBF-ONCH, TRAC and ISOPROBE are carried out on board the Aureol-3 satellite to measure the AC and DC electric and magnetic fields and waves. Several modes of telemetry, real time and memory regimes are available for data transmission. TBF-ONCH is devoted to the measurement of 3 components of the DC electric field, 2 electric and 3 magnetic components of the waves. In one mode of the real time telemetry these 5 components are transmitted simultaneously in the frequency range 10 Hz-1.5 kHz in order to be able to determine the wave normal directions of natural emissions and to localize their sources. In the second mode, morphological studies of saucers, chorus, hiss and triggered emissions can be undertaken using the wide band transmission (70 Hz-16 kHz) of any one of these 5 components with the possibility of periodically changing the transmitted component every 4 seconds or keeping the same one during all the pass. TRAC makes use of the on board 3 axis flux gate magnetometer to perform a fine measurement of the magnetic effects of the currents flowing in the vicinity of the spacecraft either in the ionosphere or along the magnetic field lines, with a resolution of ～ 12 nT and in the frequency range from DC to ～ 20 Hz. One component of the HF electric field (0.1–10 Mhz) is measured by ISOPROBE (see companion paper). Examples of inflight measurements from the above instruments and their presentation on microfiches are shown. Some new phenomena are emphasized and briefly discussed.     

Mesospheric doppler wind measurements from Aura Microwave Limb Sounder (MLS)

This paper describes a microwave limb technique for measuring Doppler wind in the Earth’s mesosphere. The research algorithm has been applied to Aura Microwave Limb Sounder (MLS) 118.75 GHz measurements where the O₂ Zeeman lines are resolved by a digital autocorrelation spectrometer. A precision of ∼17 m/s for the line-of-sight (LOS) wind is achieved at 80–92 km, which corresponds to radiometric noise during 1/6 s integration time. The LOS winds from Aura MLS are mostly in the meridional direction at low- and mid-latitudes with vertical resolution of ∼8 km. This microwave Doppler technique has potential to obtain useful winds down to ∼40 km of the Earth’s atmosphere if measurements from other MLS frequencies (near H₂O, O₃, and CO lines) are used. Initial analyses show that the MLS winds from the 118.75 GHz measurements agree well with the TIDI (Thermosphere Ionosphere Mesosphere Energetics and Dynamics Doppler Interferometer) winds for the perturbations induced by a strong quasi 2-day wave (QTDW) in January 2005. Time series of MLS winds reveal many interesting climatological and planetary wave features, including the diurnal, semidiurnal tides, and the QTDW. Interactions between the tides and the QTDW are clearly evident, indicating possible large tidal structural changes after the QTDW events dissipate.     

Solar X-ray Monitor (XSM) on-board Chandrayaan-2 orbiter

The remote X-ray fluorescence spectroscopy is a powerful technique to investigate the elemental abundances in the atmosphere-less planetary bodies. The experiment involves measuring spectra of fluorescent X-rays from lunar surface using a low energy X-ray detector onboard an orbiting satellite. Since the flux of fluorescent X-ray lines critically depend on the flux and spectrum of the incident solar X-rays, it is essential to have simultaneous and accurate measurement of X-ray from both Moon and Sun. In the context of Moon, this technique has been employed since early days of space exploration to determine elemental composition of lunar surface. However, so far it has not been possible to exploit it to its full potential due to various reasons. Therefore it is planned to continue the remote X-ray fluorescence spectroscopy experiment on-board Chandrayaan-2 which includes both lunar X-ray observations and solar X-ray observations as two separate payloads. The lunar X-ray observations will be carried out by Chandra Large Area Soft x-ray Spectrometer (CLASS) experiment; whereas the solar X-ray observations will be carried out by a separate payload, Solar X-ray Monitor (XSM). Here we present the overall design of the XSM instrument, the present development status as well as preliminary results of the laboratory model testing. XSM instrument will have two packages namely – XSM sensor package and XSM electronics package. XSM will accurately measure spectrum of Solar X-rays in the energy range of 1–15 keV with energy resolution ∼200 eV @ 5.9 keV. This will be achieved by using state-of-the-art Silicon Drift Detector (SDD), which has a unique capability of maintaining high energy resolution at very high incident count rate expected from Solar X-rays. XSM onboard Chandrayaan-2 will be the first experiment to use such detector for Solar X-ray monitoring.     

Balloon-borne far-infrared spectrophotometry of the galactic center region

Far-infrared observations of the Galactic Center have been carried through with the MPE Im balloon-borne telescope “Golden Dragon”. The measurements are composed of photometric scanning (33–95 μm) of the inner 4′×4′ and low resolution spectroscopy (δ^ν = 10 cm^?1) of the center and of a position approximately 1.5′ to the north. A Mars spectrum has been obtained for calibration. The spatial resolution of the photometry map is increased using the Maximum Entropy Method and the resulting map is compared to other observations in the same and other spectral regions. A clear asymmetry in the ring-like structure around the center indicates the presence of noncircular motions. The shape of the spectra is fairly smooth with at least no prominent dust features. A simple modelling shows a drastic increase of column density within 2 pc from the center and a modest drop over the next 3 pc to the north.     

High resolution science with high redshift galaxies

We summarize the high-resolution science that has been done on high redshift galaxies with Adaptive Optics (AO) on the world’s largest ground-based facilities and with the Hubble Space Telescope (HST). These facilities complement each other. Ground-based AO provides better light gathering power and in principle better resolution than HST, giving it the edge in high spatial resolution imaging and high resolution spectroscopy. HST produces higher quality, more stable PSF’s over larger field-of-views in a much darker sky-background than ground-based AO, and yields deeper wide-field images and low-resolution spectra than the ground. Faint galaxies have steadily decreasing sizes at fainter fluxes and higher redshifts, reflecting the hierarchical formation of galaxies over cosmic time. HST has imaged this process in great structural detail to z  6, and ground-based AO and spectroscopy has provided measurements of their masses and other physical properties with cosmic time. Last, we review how the 6.5 m James Webb Space Telescope (JWST) will measure First Light, reionization, and galaxy assembly in the near–mid-IR after 2013.     

The extreme ultraviolet explorer

The Extreme Ultraviolet Explorer (EUVE) Mission is described. The purpose of this mission is to search the celestial sphere for astronomical sources of extreme ultraviolet (EUV) radiation (100–1000Å). The search will be accomplished with the use of three EUV telescopes, each sensitive to different bands within the EUV band. A fourth telescope will perform a high sensitivity search of a limited sample of the sky in a single EUV band. In six months, the entire sky will be scanned at a sensitivity level comparable to existing surveys in other more traditional astronomical bandpasses. A substantial number of EUV sources such as hot white dwarfs and stellar coronae are certain to be discovered given our current knowledge. More uncertain is what entirely new classes of objects will be discovered as EUV sources. A moderate resolution (～ 5Å) spectroscopy option is being considered which would cover the band from 80 to 600Å. This instrument would be capable of providing spectra of at least the 100 brightest EUV sources and would be utilized entirely on a Guest Investigator basis.     

The detection of energetic cometary and solar particles by the EPONA instrument on the Giotto mission

EPONA is an energetic particle detector system incorporating totally depleted silicon surface barrier layer detectors. Active and passive background shielding will be employed and, by applying various techniques, particles of different species, including electrons, protons, alpha particles and pick-up ions of cometary origin may be detected over a wide spectrum of energies extending from the tens of KeV into the MeV range.

The instrument can operate in two modes namely (a) in a cruise phase or storage mode and (b) in a real time mode. During the real time mode, observations at high spatial (octosectoring) and temporal (0.5s) resolution in the cometary environment permit studies to be made of accelerated particles at the bow shock and/or in the tail of the comet. In conjunction with magnetic field measurements on board Giotto, observations of energetic electrons and their anisotropies can determine whether the magnetic field lines in the cometary tail are open or closed. Further, the absorption of low energy solar particles in the cometary atmosphere can be measured and such data would provide an integral value of the pertaining gas and dust distribution. Solar particle background measurements during encounter may also be used to correct the measurements of other spacecraft borne instruments potentially vulnerable to such radiation.

Solar particle flux measurements, obtained during the cruise phase will, when combined with simultaneous observations made by other spacecraft at different heliographic longitudes, provide information concerning solar particle propagation in the corona and in interplanetary space.     

SPOT 4 VEGETATION system: Association with high resolution data for multiscale studies

The SPOT 4 VEGETATION system is a joint program of the European Commission, France, Sweden, Belgium and Italy, to be launched in 1997. It will provide global and frequent measurements adapted to biosphere studies, especially for monitoring of the biophysical processes of the vegetation canopies. Information derived from its measurements will allow operational and long term studies related either to the production of agricultural areas or to the functioning of ecosystems, to their interaction with the atmosphere and climatic changes. The design of the entire system, from the instrument to the ground segment, was aimed at providing direct capability for multitemporal analysis of surface reflectance measurements at medium spatial resolution as well as for association with high spatial resolution data sets available from the SPOT High Resolution instrument or from other systems. Nature and quality of products delivered by the system were especially tailored taking into account the development of research done on previous systems and the needs for characterizing the temporal dynamic aspects of biosphere processes and relating regional or ecosystems' parameters to local parameters less affected by spatial heterogeneity.     

Instrumentation and data systems for high-time resolution study of space plasma shocks

This paper deals with the principal methods of achieving high-time resolution measurements for the study of fine structure of shocks and other discontinuities in space plasmas. In the measurements of ion energy spectra, we have obtained the time resolution about 1s.In the Soviet-Czechoslovak INTERSHOCK project we will obtain temporal resolution better than 0.1s in the measurement of the main plasma parameters. This will be obtained with the multichannel energy spectrometer and the on-board data acquisition and processing system triggered by the shock signature. This system controls the data sampling rate from some scientific instruments and switches on a high-sampling rate near the shock. The method implies detecting a shock by means of on-board processing of magnetic field and plasma parameters. The algorithm for this detection uses both parameters separately as well as in combinations.     

Influence of different data fusion methods on the accuracy of three-dimensional displacements field

Combining multi-source data can improve the accuracy and the spatial resolution of the three-dimensional (3-D) displacements field. How to effectively integrate multi-source data to obtain high-precision and high spatial resolution 3-D displacements field is worthy of further study. The stochastic model and fusion model of integrating multi-source data affect the accuracy of data fusion. In this paper, based on the least squares method, the effects of different stochastic models and data fusion models on the 3-D displacements field’s accuracy are studied. The optimal method for estimating large-scale 3-D displacements field from integrated InSAR, leveling and GPS measurements is obtained. Then we realize the integrating InSAR, leveling and GPS measurements to obtain the high-precision 3-D displacements velocity field in Tianjin (China) from 2016 to 2018. The results are validated with GPS measurements at 6 independent stations, with the root mean squares (RMS) residuals of the discrepancies being 2.39 mm/yr, 2.54 mm/yr and 2.83 mm/yr in eastern, northern and vertical directions, respectively. By comparing different stochastic models, the 3-D displacements field obtained from multi-source data is optimized by the variance component estimation-least squares method, which is better than weighted least squares (WLS) method. By comparing different data fusion models, the accuracy of the horizontal displacements velocity is better than that of interpolated GPS results. The horizontal displacements component has a great influence on the vertical displacements velocity accuracy in the process of acquiring the 3-D displacements velocity by integrating InSAR, GPS and leveling measurements. This study provides a reference method for integrating multi-source data to obtain 3-D displacements field. This method effectively utilizes the advantages of GPS, InSAR and leveling measurements, and extends the limitations of single technical in describing surface-time scale applications. The 3-D displacements information with a large spatial scale and high spatial resolution provide a reliable data basis for studying the crustal movement and its dynamic mechanism.     

Towards high accuracy GNSS real-time positioning with smartphones

The possibility to access undifferenced and uncombined Global Navigation Satellite System (GNSS) measurements on smart devices with an Android operating system allows us to manage pseudorange and carrier-phase measurements to increase the accuracy of real-time positioning. The goal is to perform real-time kinematic network positioning with smartphones, evaluating the positioning accuracy regarding an external mass-market device. The positioning of Samsung Galaxy S8+ and Huawei P10 plus smartphones was performed using a dedicated tool developed by the authors, considering a continuous operating reference station (CORS) network with a mean inter-station distance of about 50?km. The same positioning technique was also applied to an external GNSS low-cost single-frequency receiver (u-blox EVK-M8T) to compare performance between the receiver and antenna embedded in the previous smartphones and this low-cost receiver coupled with a mass-market antenna (Garmin GA38). Attention was also focused on the phase ambiguity resolution, that it is still a challenging aspect for mass-market devices: even if the two smartphones provide slightly different results, the accuracy obtainable today is greater than 60?cm with a precision of few centimetres in real-time, if a CORS network is available. For real-time applications using portable devices, decimetre-level accuracy is sufficient for many applications, such as rapid mapping and search and rescue activities: these results will open new frontiers in terms of real-time positioning with portable low-cost devices.     

Contributions of incoherent-scatter radar measurements at Arecibo for the improvement of IRI

In the years 1974 to 1977 the incoherent-scatter radar at Arecibo made high resolution measurements of electron density in time and altitude, under the I29 program. This program ran on monthly basis and each observing run was for about 36 hours, consisting of two daytime periods and the intervening night. Electron density was measured from 100 to 500 km with a single 24 μs pulse which provided an altitude resolution of 3.6 km. These measurements provided very accurate values of hmF2, h0.5, E-F valley parameters and topside Ne gradient thereby providing important inputs for the improvement of IRI. This paper gives a summary of these inputs.     

Novel method for reconstruction of hyperspectral resolution images from multispectral data for complex coastal and inland waters

Hyperspectral resolution image products of a synthetic sensor featuring the high spatial resolution of the space-borne sensor can offer cost-effective means for enhancing our current capabilities in terms of providing an array of images in lieu of designing an expensive system for image acquisition, which can serve the expanding needs of the scientific and user communities for various critical water color applications. Despite several studies on enhancing the capability of land remote sensing sensors, full spectrum reconstruction of water color images with varying spectral bands is hampered by the lack of methods and accurate atmospheric correction procedures. In the present work, a novel method is developed for reconstruction of hyperspectral resolution images from high spatial-resolution Sentinel 2 Multispectral Instrument (MSI) data representative of many complex waters in coastal and inland zones. This method uses a deep neural network (DNN) with multiple blocks of deconvolution and dense layers. The spectral reconstruction of hyperspectral resolution images from multispectral data was based on rigorous training data from the atmospherically-corrected and validated HICO normalized water-leaving radiance products (with spectral resolution 438-868 nm sampled at 5.7 nm) of diverse water types. The generalizability and versatility of the DNN method was tested and evaluated systematically by means of various qualitative and quantitative analyses using concurrent space-borne (MSI and HICO) and in-situ measurements from different regional waters. Reconstructed hyperspectral resolution radiances obtained from the MSI images closely matched with independent HICO and MSI measurements within the desired accuracy. Successful reconstruction and validation of the hyperspectral radiances indicate that the proposed state-of-the-art method provides possible future directions for enhancing our current capabilities of space-borne sensors for various research purposes and societal applications at local, regional and global scales.