采用智能材料的变弯扭机翼实验研究

以飞翼布局为研究对象,对常规和智能两种后缘襟翼模型进行了对比试验,在风洞中探索用智能材料植入机翼代替常规铰接式后缘襟翼的气动效益。本文给出了在北航D1风洞1/20半模模型对比风洞试验的结果,结果表明:在与常规襟翼相同偏角情况下,智能襟翼具有更大的增升效益;在常规襟翼失效的偏角情况下,智能襟翼仍能提供额外升力;在实验攻角范围内智能襟翼比常规襟翼平均增升20%以上。     

A study of morphing aircraft on morphing rules along trajectory

Morphing aircraft can meet requirements of multi-mission during the whole flight due to changing the aerodynamic shape, so it is necessary to study its morphing rules along the trajectory. However, trajectory planning considering morphing variables requires a huge number of expensive CFD computations due to the morphing in view of aerodynamic performance. Under the given missions and trajectory, to alleviate computational cost and improve trajectory-planning efficiency for morphing aircraft, an offline optimization method is proposed based on Multi-Fidelity Kriging (MFK) modeling. The angle of attack, Mach number, sweep angle and axial position of the morphing wing are defined as variables for generating training data for building the MFK models, in which many inviscid aerodynamic solutions are used as low-fidelity data, while the less high-fidelity data are obtained by solving viscous flow. Then the built MFK models of the lift, drag and pressure centre at the different angles of attack and Mach numbers are used to predict the aerodynamic performance of the morphing aircraft, which keeps the optimal sweep angle and axial position of the wing during trajectory planning. Hence, the morphing rules can be correspondingly acquired along the trajectory, as well as keep the aircraft with the best aerodynamic performance during the whole task. The trajectory planning of a morphing aircraft was performed with the optimal aerodynamic performance based on the MFK models, built by only using 240 low-fidelity data and 110 high-fidelity data. The results indicate that a complex trajectory can take advantage of morphing rules in keeping good aerodynamic performance, and the proposed method is more efficient than trajectory optimization by reducing 86% of the computing time.     

折叠翼变体飞行器非定常气动特性实验研究

折叠翼变体飞行器是一种可以在飞行中改变自身气动外形的新型飞行器。研制出了一种折叠翼变体飞行器的风洞实验模型,在风洞实验中测得了模型不同变体位置下的气动力以及进行变体运动时气动力的动态变化过程,并通过PIV实验手段获得模型周围的流场在变体运动过程中的变化情况。结果表明：在机翼变形过程中,折叠翼模型有明显的非定常气动现象产生,而且折叠变形的速度越大,非定常现象越明显。出现非定常现象的主要原因是变体运动对机翼前缘涡的影响。     

压电驱动器的气动弹性应用

 随着压电智能材料与结构的发展,压电驱动器在气动弹性控制领域占据重要地位。使用压电驱动器控制翼面变形,利用而不是抵抗气动弹性效应可以控制升力、力矩以及它们的分布。采用基本相同的智能结构翼面控制系统,根据不同的控制目标需求,使用压电智能材料驱动器可以达到多种目的,包括静态的形状控制与动态的颤振抑制、抖振控制与阵风响应控制。静态控制方面例如改变翼面形状获得附加空气动力以增加升力、提供横滚力矩、改变升力分布以减小诱导阻力或减小翼根弯矩等;动态控制例如利用改变翼面形状产生的附加空气动力作为控制载荷,改变气动弹性系统的耦合程度,根据控制效果要求可作为气动阻尼、气动刚度或气动质量。这种控制方法可以减轻结构重量,提高操纵效率,扩大飞行包线,提高材料利用率,已成为可变形飞行器的重要研究内容。本文主要阐述压电驱动器气动弹性应用的动机与机理、发展与成就以及问题与展望。     

飞翼布局无人机变形机翼设计与模型验证研究

对飞翼布局无人机变形机翼和变形机翼传动机构进行了设计,根据设计结果制作验证模型进行风洞实验和外场飞行试验,以此研究伸缩段机翼对飞行器机翼整体气动性能的影响。结果表明:采用变形机翼技术,可以通过实时控制机翼的气动外形保持较高的气动效率,提高飞机在巡航状态下的升力和高速飞行状态下的机动性,满足飞机在各种任务剖面的战术性能要求。     

A compliant polymorphing wing for small UAVs

This paper presents the development of a novel compliant polymorphing wing capable of chord and camber morphing for small UAVs. The morphing wing can achieve up to 10% chord extension and ±20° camber changes. The design, modeling, sizing, manufacturing and mechanical testing of the wing are detailed. The polymorphing wing consists of one continuous front spar fixed to the fuselage and a rear spar on each side of the wing. Each rear spar can translate in the chordwise direction (chord morphing) and rotate around itself (camber morphing). A flexible elastomeric latex sheet is used as the skin to cover the wing and maintain its aerodynamic shape whilst allowing morphing. The loads from the skin are transferred to the spars using the compliant cellular ribs that support the flexible skin and facilitate morphing. Pre-tensioning is applied to the skin to minimize wrinkling when subject to aerodynamic and actuation loads. A rack and pinion actuation system, powered by stepper motors, is used for morphing. Aero-structural design, analysis and sizing are conducted. Performance comparison between the polymorphing wing and the baseline wing (non-morphing) shows that chord morphing improves aerodynamic efficiency at low angles of attack while camber morphing improves efficiency at high angles of attack.     

折叠机翼变体飞机非对称变形控制效率分析

折叠机翼变体飞机变形量大,变形引起的气动参数变化显著,提出一种将非对称变形作为操纵输入的控制方案,研究非对称变形的控制效率和有效区间。首先建立能够完整描述变形过程的非线性动力学方程和气动力模型;然后基于非对称变形控制方法建立一种非对称变形操纵模型;最后通过与常规操纵面效率对比和仿真的动态响应总结出非对称变形操纵的最大变形操纵有效区间。结果表明:在较低飞行速度下非对称变形操纵效率高,非对称变形操纵能够在基准折叠角度90°附近提供最高的滚转操纵效率。     

Topology optimization of compliant adaptive wing leading edge with composite materials

An approach for designing the compliant adaptive wing leading edge with composite material is proposed based on the topology optimization. Firstly, an equivalent constitutive relationship of laminated glass fiber reinforced epoxy composite plates has been built based on the symmetric laminated plate theory. Then, an optimization objective function of compliant adaptive wing leading edge was used to minimize the least square error（LSE） between deformed curve and desired aerodynamics shape. After that, the topology structures of wing leading edge of different glass fiber ply-orientations were obtained by using the solid isotropic material with penalization（SIMP） model and sensitivity filtering technique. The desired aerodynamics shape of compliant adaptive wing leading edge was obtained based on the proposed approach. The topology structures of wing leading edge depend on the glass fiber ply-orientation. Finally, the corresponding morphing experiment of compliant wing leading edge with composite materials was implemented, which verified the morphing capability of topology structure and illustrated the feasibility for designing compliant wing leading edge. The present paper lays the basis of ply-orientation optimization for compliant adaptive wing leading edge in unmanned aerial vehicle（UAV） field.     

Gain self-scheduled H_∞ control for morphing aircraft in the wing transition process based on an LPV model

This article investigates gain self-scheduled H 1 robust control system design for a tailless fold- ing-wing morphing aircraft in the wing shape varying process. During the wing morphing phase, the aircraft’s dynamic response will be governed by time-varying aerodynamic forces and moments. Nonlinear dynamic equations of the morphing aircraft are linearized by using Jacobian linearization approach, and a linear parameter varying (LPV) model of the morphing aircraft in wing folding is obtained. A multi-loop controller for the morphing aircraft is formulated to guarantee stability for the wing shape transition process. The proposed controller uses a set of inner-loop gains to provide stability using classical techniques, whereas a gain self-scheduled H 1 outer-loop controller is devised to guarantee a specific level of robust stability and performance for the time-varying dynamics. The closed-loop simulations show that speed and altitude vary slightly during the whole wing folding process, and they converge rapidly after the process ends. This proves that the gain self-scheduled H 1 robust controller can guarantee a satisfactory dynamic performance for the morphing aircraft during the whole wing shape transition process. Finally, the flight control system’s robustness for the wing folding process is verified according to uncertainties of the aerodynamic parameters in the nonlinear model.     

伸缩机翼变形技术研究

变体飞机可以根据需要改变气动外形,以便在不同的飞行状态都能获得最佳的气动性能,提高飞机的任务适应能力。伸缩机翼变形技术在国外已经过几十年的研究和探索,是变体飞机技术的主要发展方向之一。本文综述了伸缩机翼技术的发展历史及国内外研究情况,阐述了伸缩机翼变形原理及其优缺点,提炼了设计伸缩机翼所涉及的关键技术,展望了伸缩机翼技术在飞机、导弹、地效翼飞行器以及飞行汽车等方面的应用前景。     

机翼结构拓扑优化的一种新渐进结构优化方法

基本ESO方法存在着删除准则单一,应用范围局限于简单结构的缺点,本文分析了其用于类似飞机机翼这种复杂结构拓扑优化设计中的不足之处,并进行针对性地改进,提出了一种新的删除准则,构成了一种新的渐进结构优化方法。算例表明,该方法适合于复杂机翼结构的拓扑优化问题,拓展了基本渐进结构优化方法的功能,有着很好的推广应用价值。     

考虑结构重量的机翼平面形状优化方法

采用工程梁理论对机翼结构进行估算,并结合气动力估算公式、飞行性能估算公式,构建了机翼平面形状优化系统。相比使用经验关系式估算重量的传统方法,考虑了短舱、起落架、燃油、自重载荷的影响,相对精确度较高。针对某宽体客机布局,展开考虑气动/结构重量的平面形状优化设计。采用若干几何特征对机翼平面形状进行参数化,通过气动力与结构重量耦合求解的方法,将气动特性与结构重量转化为飞机起飞总重这个设计目标,并使用遗传算法进行寻优。算例结果较原始构型起飞总重减少约174 kg,表明方法对飞机概念设计阶段快速确定机翼平面形状有一定的参考价值。     

变体飞机设计的主要关键技术

针对变体飞机的特点,分析了其在设计中出现的诸多新的技术难点,对拟解决的主要关键技术,包括变体飞机不同于常规固定构型飞机的总体及气动协调设计、机翼智能结构设计、可控性设计与飞行控制系统设计等进行了详细介绍。研究结果对于变体飞机的设计具有一定参考价值。     

Continuous morphing trailing-edge wing concept based on multi-stable nanomaterial

Morphing technology is one of the most effective methods to improve the flight efficiency of aircraft. Traditional control surfaces based morphing method is mature and widely used on current civil and military aircraft, but insufficiently effective for the entire flight envelope. Recent research on morphing wing still faces the challenge that the skin material for morphing should be both deformable and stiff. In this study, a continuous morphing trailing-edge wing with a new multi-stable nano skin material fabricated using surface mechanical attrition treatment technology was proposed and designed. Computational fluid dynamics simulation was used to study the aerodynamic performance of the continuous morphing trailing-edge wing. Results show that the lift coefficient increases with the increase of deflection angle and so does the lift-drag ratio at a small angle of attack. More importantly, compared with the wing using flaps, the continuous morphing trailing-edge wing can reduce drag during the morphing process and its overall aerodynamic performance is improved at a large angle of attack range. Flow field analysis reveals that the continuous morphing method can delay flow separation in some situations.     

Delaying stall of morphing wing by periodic trailing-edge deflection

Morphing wings can improve aircraft performance during different flight phases. Recently research has focused on steady aerodynamic characteristics of the morphing wing with a flexible trailing-edge, and the unsteady aerodynamic and stall characteristics in the deflection process of the morphing wing are worthy further investigation. The effects of the angle of attack and deflection rate on aerodynamic characteristics were examined, and based on the aerodynamic characteristics of the morphing wing, a method was developed to delay stall by using the flexible periodic trailing-edge deflection. The numerical results show that the lift coefficients in the deflection process are smaller than those in the static situation at small angles of attack, and that the higher the deflection rate is, the smaller the lift coefficients will be. On the contrary, at large angles of attack, the lift coefficients are higher than those in the static case, and they become larger with the increase of the deflection rate. Further, the periodic deflection of the flexible trailing-edge with a small deflection amplitude and high deflection rate can increase lift coefficients at the critical stall angle.     

Morphing wing flaps for large civil aircraft: Evolution of a smart technology across the Clean Sky program

Morphing wing structures are widely considered among the most promising technologies for the improvement of aerodynamic performances in large civil aircraft. The controlled adaptation of the wing shape to external operative conditions naturally enables the maximization of aircraft aerodynamic efficiency, with positive fallouts on the amount of fuel burned and pollutant emissions. The benefits brought by morphing wings at aircraft level are accompanied by the criticalities of the enabling technologies, mainly involving weight penalties, overconsumption of electrical power, and safety issues. The attempt to solve such criticalities passes through the development of novel design approaches, ensuring the consolidation of reliable structural solutions that are adequately mature for certification and in-flight operations. In this work, the development phases of a multimodal camber morphing wing flap, tailored for large civil aircraft applications, are outlined with specific reference to the activities addressed by the author in the framework of the Clean Sky program.The flap is morphed according to target shapes depending on aircraft flight conditions and defined to enhance high-lift performances during takeoff and landing, as well as wing aerodynamic efficiency during cruise. An innovative system based on finger-like robotic ribs driven by electromechanical actuators is proposed as morphing-enabling technology; the maturation process of the device is then traced from the proof of concept to the consolidation of a true-scale demonstrator for pre-flight ground validation tests. A step-by-step approach involving the design and testing of intermediate demonstrators is then carried out to show the compliance of the adaptive system with industrial standards and safety requirements. The technical issues encountered during the development of each intermediate demonstrator are critically analyzed, and justifications are provided for all the adopted engineering solutions. Finally, the layout of the true-scale demonstrator is presented, with emphasis on the architectural strengths, enabling the forthcoming validation in real operative conditions.     

基于拓扑优化和形状优化的桨叶结构设计

直升机旋翼桨叶剖面结构设计是研究旋翼动力学设计的基础。提出一种联合拓扑优化和形状优化的 两级优化设计方法,可用于桨叶剖面结构的设计。第一级优化以变密度法(SIMP)作为拓扑优化的材料插值方 法,以桨叶体积最小化为设计目标,约束桨叶节点位移和应力,建立桨叶的拓扑优化求解模型;第二级优化以重 构的桨叶模型为基础开展形状优化,降低局部应力集中以及找到合理的边界节点位置。对优化后的模型进行 有限元分析,结果表明:通过拓扑优化和形状优化的两级优化,能够得到满足强度和稳定性要求的结构布局,为 桨叶结构设计提供指导方案。     

伸缩机翼变体飞机气动特性研究

伸缩机翼变体飞机通过机翼伸缩调整机翼展长,从而改变机翼面积和展弦比,改变飞机的气动布局和机翼的气动特性,满足多任务点的设计要求。简要介绍伸缩机翼变体飞机的发展历史,重点研究一种采用伸缩机翼设计的超音速飞机的气动特性变化。研究结果表明：亚音速时机翼展长伸长,展弦比增大,飞机诱导阻力降低,升阻比提高,可以明显提高飞机的航程;超音速时机翼展长缩短,展弦比减小,飞机的波阻降低,升阻比增大,提高了超音速飞行性能。伸缩机翼概念用于超音速飞机设计时能很好地兼顾亚音速巡航和超音速冲刺。     

Z型翼变体飞机的纵向多体动力学特性

机翼变形时,变体飞机的翼面积、惯性特性、全机焦点和重心位置等均会发生较大的变化,从而引起飞机的动态特性也随之改变。为此对机翼变形过程中的Z型翼变体飞机进行了纵向多体动力学建模仿真;推导了变形过程中变体飞机的六自由度非线性动力学方程,并通过简化得到了解耦后的纵向动力学方程。机翼折叠动态过程的气动特性数值模拟结果表明,不同折叠角速度下飞机的气动力相差不大。在机翼折叠角速度较小且忽略非定常气动效应的情况下,采用气动力准定常假设对变形过程中不同机翼折叠角速度下变体飞机的纵向响应进行了数值仿真,并研究了重心位置移动和气动特性变化对飞机变形过程动态特性的影响规律。结果表明,折叠过程中气动特性的变化是影响飞机动态特性的主要因素,机翼折叠后飞机的速度和迎角增加,且飞行高度下降较大。     

Review on Key Technologies Progress of the Morphing Aireraft

阐述了变体飞机发展动机、发展过程及最新研究现状,主要介绍了国外主要变体飞机方案的变体模式研究进展和应用情况。在此基础上重点介绍了可变前/后掠翼,可变弦长机翼,、可变展长机翼,可变弧度机翼等方案的实现原理、研究情况,研究难点和应用情况。围绕变体飞机涉及的总体综合设计,气动布局仿真与试验智能结构与材料、传感器与驱动器、自适应变循环推进系统、飞行控制和变体可靠性监测等核心关键技术进行了重点分析,并对研究难点和研究进展进行了阐述。