Control System Performance with Coded State Feedback

The error performance of a linear time-invariant plant, remotely controlled with constant-gain state feedback from a coded digital communications link, is considered. The effects of finite information rate, reliability, and delay are examined. While nonzero code transmission delay is generally deleterious to control system performance, it is shown that if the sampling period is specified, then block coding within each sample period may be beneficial. Numerical results are given for the case of a scalar plant     

星载跟踪控制系统设计及其抗扰动分析

针对星载目标跟踪要求高精度及快速响应能力,但同时存在力矩扰动等影响,分析提出了跟踪控制系统性能指标,根据预设指标,对系统进行了初步设计及串联滞后校正,并在增加加速度计的情况下,对系统进行了抗扰动分析.利用Matlab进行系统幅频特性仿真结果表明,设计的系统能较好满足预设指标,具有良好的稳定跟踪性能.     

基于CPCI架构航天器测试设备的故障诊断设计与实现

基于CPCI总线架构的航天器测试设备可以实现模块化、集成化和通用化设计,有利于测试系统的再次开发、直接沿用以及后续维护.某型号的综合电子和控制分系统地面测试设备采用基于CPCI总线的架构,使用VxWorks操作系统作为核心调度,采取模块化FPGA开发接口和特定功能.提出以监听任务、功能模块、板卡运行时间为检测手段,实现了对系统测试设备故障的诊断,尤其是反作用轮转速模块,软件能自主进行故障处理.在分系统及整星测试的使用过程中,此方法有效提高了设备的可靠度,提高了对星上产品的安全保护,保证整星大型试验的连续可靠运行.此方法对于其他地面测试设备的故障诊断具有一定的借鉴作用.     

高性能军用机环境控制系统研究发展趋势的探讨

讨论了未来高性能军用机环境控制系统发展可能采用的技术,例如：闭式空气循环技术;综合数字控制技术;蒸发循环技术;先进驱动的空气循环机和压气机技术;以及从属于综合机载机电系统的综合环境控制系统技术。     

空空导弹大角度姿态反作用喷气控制

为研究具有大离轴角及越肩发射能力的先进空空导弹初始段敏捷转弯方法,研究了装有反作用喷气控制系统的空空导弹的大角度姿态过失速机动控制律。反作用喷气控制系统用来提供大角度敏捷转弯时大攻角飞行的控制力矩。利用时间尺度分离的方法将导弹的姿态动力学和运动学系统分别看作快子系统和慢子系统。用李亚普诺夫方法设计了慢子系统控制律,利用滑动模态方法设计了快子系统控制律,在该控制律作用下,导弹闭环系统不仅是稳定的而且其动态品质也可以得到保证。分析了控制系统的鲁棒性,结果表明所提控制方法能够有效消除空空导弹大角度姿态机动时转动惯量变化以及各种力矩干扰的影响。最后给出了一个实例来说明姿态控制在空空导弹敏捷转弯中的应用。     

基于改进姿态控制系统模型的卫星多学科优化

分析了三轴稳定卫星姿态控制分系统与其它分系统的耦合关系,选定了姿态稳定方式和姿态控制系统硬件,建立了更为精确的计算姿态控制分系统质量和功率的分析模型,然后基于多学科设计优化协同优化算法建立了总体系统、姿态控制分系统、电源分系统和结构分系统的优化模型,最后用C语言对分析模型和优化模型编程计算.结果表明,分系统模型能与总体系统模型有效协调优化,得到更好的总体性能指标.      

Compact equipment for on-board communications subsystem supervisoryand control system

Onboard equipment for the communications subsystem supervisory and control (CSC) system of a next-generation multibeam high-capacity communications satellite is discussed. In order to keep the equipment as compact, lightweight, and low in power consumption as possible, an onboard data bus system using four kinds of LSIs was developed. It will be carried on-board the Japanese Engineering Test Satellite VI for launch in 1993. Configuration and functions of the CSC equipment, design philosophy of the LSIs, and characteristics of the LSIs developed are discussed     

防空导弹直接力与气动力复合控制系统设计

以大气层内拦截导弹侧向直接力和气动力的复合控制系统为研究对象，首先分析了侧向喷流与来流的干扰现象，建立了通过于扰放大因子来描述的侧喷与来流的干扰模型和侧向直接力与气动力的复合控制模型，将复合控制系统分解为直接力于系统和气动力于系统，并分别针对侧向直接力和气动力的特点设计了直接力控制于系统和气动力控制于系统，仿真分析了两个子系统的性能及复合系统的性能。     

关于新一代飞机的设计载荷

设计载荷是确定飞机结构重量和保证安全的重要因素。常规操纵系统飞机的设计载荷都是由现行的强度规范规定的。但是对于采用主动控制技术和复合材料的高机动飞机,现行的规范已不合适。在过去10年中,飞机界的专家对此问题进行了大量研究。本文根据北约公开的材料介绍这些研究工作。本文首先评述了现有规范并指出其不足,然后讨论了安全系数。为确定主动控制的新飞机的设计载荷,介绍了3种方法,即概率法、作战飞行参数法和飞行参数包线法及其在EF2000飞机设计中的应用;还介绍了飞机设计的各种动载荷;最后提出了确定我国新一代飞机设计载荷的建议。     

Canonical transform for tracking with kinematic models

A canonical transform is presented that converts a coupled or uncoupled kinematic model for target tracking into a decoupled dimensionless canonical form. The coupling is due to non-zero off-diagonal terms in the covariance matrices of the process noise and/or the measurement noise, which can be used to model the coupling of motion and/or measurement between coordinates. The decoupled dimensionless canonical form is obtained by simultaneously diagonalizing the noise covariance matrices, followed by a spatial-temporal normalization procedure. This canonical form is independent of the physical specifications of an actual system. Each subsystem corresponding to a canonical coordinate is characterized by its process noise standard deviation, called the maneuver index as a generalization of the tracking index for target tracking, which characterizes completely the performance of a steady-state Kalman filter. A number of applications of this canonical form are discussed. The usefulness of the canonical transform is illustrated via an example of performance analysis of maneuvering target tracking in an air traffic control (ATC) system.     

基于混合网格的三维Navier-Stokes方程并行算法

提出了一种基于混合网格的三维Navier-Stokes方程的并行计算方法。Navier-Stokes的求解采用了基于面的有限体积方法,该方法适用于任何网格类型。采用一方程Spalart-Allmaras模型来计算紊流黏性。并行计算采用区域分裂的方法,利用METIS网格分区系统实现了各节点的加载平衡。节点间的数据交换通过调用MPI库函数来实现,采用非阻断通讯的方式来减少数据交换时间。充分利用FORTRAN90的动态存储特性来减少对内存的需求。最后,通过对绕DLR-F6外形(翼身组合体+挂架+发动机短舱)黏性流动的数值模拟,验证了该并行程序的准确性,高性能并行计算以及处理复杂几何外形的能力。     

Data link communication equipment approved by USAF for civil air traffic control

Operations within civil airspace will transition from traditional ground-based air traffic control (ATC) to air traffic management (ATM), a concept that requires aircrews and ground managers to share responsibility of aircraft separation assurance. Increased levels of information exchange will be necessary for this concept to work safely; therefore, air-ground communications will transition from voice to data link communications. The nature of data link communications procurement requires that avionics suppliers not only verify their products meet contractual performance requirements, but also demonstrate that their products are compatible with civil communication networks and ATC. In addition, the USAF needs to demonstrate that their crew-training program is adequate to maintain the required level of aircrew proficiency and equipment can be maintained for the required level of system performance, integrity, and interoperability with the civil environment. This paper outlines some of the certification issues facing the USAF with respect to the "Approval for Use" of data link equipment to be used for communication with ATC. It will also suggest a methodology for the avionics supplier and USAF to obtain the approvals required to ensure the installation of data link communications equipment on military aircraft will remain interoperable with civil ATC.     

K8V变稳飞机飞行试验验证系统

介绍了Ｋ８Ｖ变稳飞机飞行试验验证系统的组成及功能,分别阐述了该系统的飞控软件综合验证子系统、机上地面试验数据采集与处理子系统和飞行试验数据处理分析子系统等三部分的组成、工作原理、以及在飞行试验各个阶段的不同特点和作用。通过Ｋ８Ｖ变稳飞机飞行试验的应用,表明该系统能够满足变稳飞机的软件维护、系统验收试飞及后续的应用研究,具有实时,快速,准确,自动化等优点,可为Ｋ８Ｖ变稳飞机应用研究提供重要的支持手段     

无人机空中加油自主会合的制导与控制

针对无人机空中加油的自主会合问题,进行了相应制导律和非线性控制器的设计。通过改进的带角度约束的三维比例制导律实现对航向角的控制,以协调转弯的方式将航迹角指令转化为姿态角指令。基于无人机六自由度的动力学模型,针对无人机的姿态控制,采用时标分离的方法设计了慢子系统和快子系统,并对这两个子系统分别进行动态逆控制设计。同时,基于滑模控制的方法设计了满足自主会合要求的速度控制律。在保证无人机飞行稳定的基础上,实现了对控制和制导指令的精确跟踪。仿真结果表明,所设计的制导律和控制律能够实现无人机空中加油的自主会合,具有良好的动态特性。     

Digital air/ground communications for air traffic control

The early 1990's communications for air traffic control (ATC) uses analog single channel radios with conventional amplitude modulation (AM) in the very high frequency (VHF) band. To overcome eventual saturation of the current system, a sample “next generation” ATC communications system has been designed to increase capabilities and provide a graceful transition from the current system. The new ATC communication system must address problems with the modulation format and a balance between increased channel capacity and overall cost. The controller/pilot workloads can be reduced in that the information segments allow for either semi-automatic or fully automatic handoff or frequency change. The principal performance factor is the addition of data, fully integrated with voice, while offering an increase in throughput. The architecture is structured to put priority on the uplink voice messages while offering significant information capacity capabilities for external data sources. When digital data and voice communication systems mature in the ATC environment, a natural evolution to more data traffic and less voice will occur. At that time, a simple restructuring of the channel assignments and priorities could offer increased throughput for connection to ground based data sources such as high capacity routers     

应用于小型风洞的数据采集系统

随着科研工作的大量增加,应用计算机采集和处理实验数据已成为当务之急。目前,关于数据采集和处理的资料很多,但均以A/D、D/A转换,数字处理为主,构成一套成整的数据采集系统的资料却非常少。尤其在实际应用中,专用的数据采集系统是必不可少的。因此,本文从实际应用出发,叙述了小型风洞实验数据采集系统的软硬件之构成,重点叙述了风洞实验中对计算机的遥控装置。      

空间模块化机械手系统容错控制系统研究

研究搭载在空间站或其他近地轨道航天器上的空间模块化机械手系统的容错控制系统.与地面应用环境相比较,空间特殊的应用环境存在许多不同,因而传统工业机械手系统的设计技术不能直接应用于空间机械手系统的设计.考虑到空间应用对系统质量、体积、功耗、研制费用和周期所提出的苛刻要求,主要采用COTS器件设计并实现该空间机械手系统的容错控制系统,介绍了系统的软硬件体系结构及其特点,最后给出系统的性能参数.在系统设计中采用许多已有的设计技巧与工程经验,具有高可靠性和工程实用性.     

Access control system with hand geometry verification and smartcards

An access control system that joins the uniqueness of biometric verification, as well as the storage security and processing capabilities of smart cards, is defined here. The biometric technique chosen has been hand geometry, which is considered to provide low/medium security (there are other much more secure, as fingerprint, iris or retina), to be easy to use, to achieve high acceptance by users, and which performance is given throughout fast processing and medium cost. Also, the small template size needed for each user is positive for storage and processing capabilities required in the system. But the innovation in the system proposed is that the smart card not only stores the user's template, but also performs the verification process with the features set by the terminal to the card. With this improvement, the security of the system has risen because the template is never extracted from the card, avoiding duplication of such sensible data. The specifications for the enrolment process will be presented as well as the applications where this new system is recommended     

挤压式磁流变液阻尼器—转子系统的振动控制试验

以小型航空发动机的转子和支承结构为设计参考,设计和制造了一种支承在挤压式磁流变液阻尼器上的单盘转子系统,并试验研究了在不同控制电流条件下系统的不平衡响应特性。试验发现,磁拉力对一阶临界转速和临界振幅的影响可以忽略;油膜反力可降低转子系统在无阻尼临界转速处的振幅,并使临界转速增加。根据这一特性,提出用开关控制能使阻尼器具有最佳的减振效果。研究表明,挤压式磁流变液阻尼器具有结构简单、控振效果明显、反馈迅速等特点,在高速柔性转子系统的振动控制中极具应用前景。      

Japan's CS (Sakura) Communications Satellite Experiments

The Japanese Communications Satellite (CS), called Sakura, is a "Medium Capacity Communications Satellite for Experimental Purposes" and is the first experimental communications satellite in which 30/20 GHz bands were adopted and were developed for practical domestic use. Large scale field trials have been carried out for more than three years in order to evaluate 30/20 GHz (Ka-band) and 6/4 GHz (C-band) domestic satellite communications system technologies under actual operational conditions by using the CS Sakura launched in December 1977. Through the various experiments on Kand C-band large fixed and small transportable Earth station systems, satellite control experiments, and Ka-band propagation measurements, it has been verified that the medium capacity satellite communications system meets the design objectives.