An Application of Radiometric Techniques to Precision Angle Tracking Radar Systems

A new technique is described which provides for precision angle tracking of celestial radio sources with a conventional monopulse antenna receiving system. It is shown that this technique is readily adapted to angle tracking radars. The features of conventional monopulse operation are preserved while permitting precise angle tracking of noise sources when signal to noise ratios are much less than unity. Measurements, using a four-horn monopulse feed with a 28-foot parabolic reflector and a "monopulse radiometer" produced the characteristic monopulse angle detection functions when using the sun, the moon, and Cassiopeia A as boresight reference sources. Precision measurements were made to 8 arc second under varying weather conditions using 28-foot radio astronomy antennas. The accuracy of the measurements were limited by the antenna angle encoders, consequently no conclusions are drawn with regard to the absolute accuracy of the measurements. The celestial coordinates of four discrete radio sources and the equations for coordinate transformation to local elevation and azimuth are contained in the Appendixes.     

Tracker and signal processing for the benchmark problem with unresolved targets

Radar signal processing is particularly important in tracking closely spaced targets and targets in the presence of sea-surface-induced multipath. Closely spaced targets can produce unresolved measurements when they occupy the same range cell of the radar. These issues are the salient features of the benchmark problem for tracking unresolved targets combined with radar management, for which this paper presents the only complete solution to date. In this paper a modified version of a recently developed maximum likelihood (ML) angle estimator, which can produce two measurements from a single (unresolved) detection, is presented. A modified generalized likelihood ratio test (GLRT) is also described to detect the presence of two unresolved targets. Sea-surface-induced multipath can produce a severe bias in the elevation angle measurement when the conventional monopulse ratio angle extractor method is used. A modified version of a recently developed ML angle extractor, which produces nearly unbiased elevation angle measurements and significantly improves the track accuracy, is presented. Efficient radar resource allocation algorithms for two closely spaced targets and targets flying close to the sea surface are also presented. Finally, the IMMPDAF (interacting multiple model estimator with probabilistic data association filter modules) is used to track these targets. It is found that a two-model IMMPDAF performs better than the three-model version used in the previous benchmark. Also, the IMMPDAF with a coordinated turn model works better than the one using a Wiener process acceleration model. The signal processing and tracking algorithms presented here, operating in a feedback manner, form a comprehensive solution to the most realistic tracking and radar management problem to date.     

High Range-Resolution Monopulse Tracking Radar

High range-resolution monopulse (HRRM) tracking radar which maintains wide instantaneous bandwidth through both range and angle error sensing channels provides range, azimuth, elevation, and amplitude for each resolved part of the target. The three-dimensional target detail can be used to improve and extend radar performance in several ways: for improved precision of target location, for target classification and recognition, to counter repeater-type ECM, to improve low-angle multipath tracking, to resolve multiple targets, as a miss-distance measurement capability, and for improved tracking in chaff and clutter. These have been demonstrated qualitatively except for the ECCM to repeater ECM and low-altitude tracking improvement. Initial results from an experimental HRRM radar with 3-ns pulse length show resolution of aircraft into its major parts and precise location of each resolved part accurately in range and angle. Realtime closed-loop tracking is performed on aircraft in flight using high-speed sampled, digitized, and processed HRRM range and angle video data. Clutter rejection capability is also demonstrated.     

Monopulse DOA estimation of two unresolved Rayleigh targets

This paper provides for new approaches to the processing of unresolved measurements as two direction-of-arrival (DOA) measurements for tracking closely spaced targets rather than the conventional single DOA measurement of the centroid. The measurements of the two-closely spaced targets are merged when the target echoes are not resolved in angle, range, or radial velocity (i.e., Doppler processing). The conditional Cramer Rao lower bound (CRLB) is developed for the DOA estimation of two unresolved Rayleigh targets using a standard monopulse radar. Then the modified CRLB is used to give insight into the boresight pointing for monopulse DOA estimation of two unresolved targets. Monopulse processing is considered for DOA estimation of two unresolved Rayleigh targets with known or estimated relative radar cross section (RCS). The performance of the DOA estimator is studied via Monte Carlo simulations and compared with the modified CRLB     

Multipath Fluctuation Effects in Track-While-Scan Radar

A theoretical model of diffuse multipath reflections from rough surfaces is applied to the prediction of multipath power distribu tions in radar coordinates: elevation angle, time delay, and Dop pler frequency. These distributions are used to predict radar tracking errors in elevation angle, for both monopulse and scan ning antenna systems, and typical results are presented. These show a small increase in tracking error for scanning systems, on radially approaching targets, caused by sensitivity of these trackers to amplitude scintillation of the composite direct-plus multipath signal. Effects of knife-edge diffraction and of vegetation ion are briefly considered.     

一种基于雷达波束驻留模式的空间碎片轨道参数估计方法

利用窄波束的单脉冲精密跟踪雷达波束驻留模式进行碎片探测是空间碎片环境统计特征描述的一种重要途径。由于该模式观测弧段极短,且无法获取同一目标的多个弧段,因而利用常规定轨方法难以达到理想的效果。在圆轨道假设下,提出了一种利用波束驻留模式获取的单个极短弧计算碎片轨道高度和倾角的方法。首先利用碎片的距离确定其轨道高度;在此基础上,根据推导出的不同波束指向时碎片的距离变化率与轨道倾角的关系,得出其轨道倾角。该方法对于正南、正东指向的雷达波束驻留模式均适用,其中正南指向时还需利用方位角和仰角数据来区分轨道倾角与补角;但不适用于波束指向天顶的情况。仿真结果验证了方法的有效性。     

Maximum likelihood angle extractor for two closely spaced targets

In a scenario of closely spaced targets special attention has to be paid to radar signal processing. We present an advanced processing technique, which uses the maximum likelihood (ML) criterion to extract from a monopulse radar separate angle measurements for unresolved targets. This processing results in a significant improvement, in terms of measurement error standard deviations, over angle estimators using the monopulse ratio. Algorithms are developed for Swerling I as well as Swerling III models of radar cross section (RCS) fluctuations. The accuracy of the results is compared with the Cramer Rao lower bound (CRLB) and also to the monopulse ratio technique. A novel technique to detect the presence of two unresolved targets is also discussed. The performance of the ML estimator was evaluated in a benchmark scenario of closely spaced targets - closer than half power beamwidth of a monopulse radar. The interacting multiple model probabilistic data association (IMMPDA) track estimator was used in conjunction with the ML angle extractor     

Performance Analysis of Monopulse Receivers for Secondary Surveillance Radar

In modern secondary surveillance radar (SSR) the monopulse technique is currently introduced for the measurement of the azimuth of the targets. The monopulse technique is based on a suitable processing of signals received by a multiple antenna. In SSR the signals are generated by a transponder on the aircraft as replies to interrogations from ground equipment, and consist of trains of pulses. The monopulse measurements can be carried out on the basis of a single pulse from each train, so that it provides a great number of azimuth estimates. Many monopulse measurement devices exist, corresponding to different processing techniques. From the point of view of accuracy and precision, their behaviors differ with respect to the sources of errors, both internal (noise and imperfect calibrations) and external (interference and propagation effects). The four main types of monopulse receivers are analyzed here with respect to the effects of the internal error sources on the resulting measurement accuracy. After an introductory discussion of the performances of the receivers, a detailed analysis is carried out on the basis of a general mathematical model. The results are given in an analytical form and in some comprehensive diagrams.     

雷达低空目标俯仰角跟踪的C2算法研究

在单脉冲测角体制下,由于多径回波信号的干扰,极大地降低了雷达低空目标仰俯角跟踪精度,甚至丢失目标。通过对多路径反射环境模型分析,得出了岸、海基单脉冲雷达低空目标跟踪时仰俯角测量误差的产生原因,提出将传统的多目标分辨算法(C2算法)应用于低角多径环境下目标俯仰角的跟踪测量,并在不同多径反射环境下对不同高度、不同飞行速度和飞行方向的目标进行了仿真,得到良好的仿真结果,表明该算法可较大地提高俯仰角跟踪测量精度。通过对仿真结果的分析,验证了该算法在低空目标跟踪中的有效性和可行性。     

Radar measurement extraction in the presence of sea-surface multipath

In the presence of sea-surface multipath monopulse radar signals from a low elevation target have three alternative paths in addition to the direct (radar-to-target) path due to reflections from the sea surface. The specular reflection causes significant signal fading. The diffuse reflection causes an approximately constant bias to the in-phase component of the monopulse ratio, which is the standard extractor of the direction of arrival (DOA) in the monopulse processing. The diffuse reflection also causes higher standard deviation to the in-phase component of the monopulse ratio. We propose a maximum likelihood (ML) angle extraction technique for low elevation targets of known average signal strength having a Rayleigh fluctuation. The results show that this method reduces the error of the estimated angle compared with the conventional monopulse ratio estimator. Subsequently, the ML angle extractor is modified for the unknown average signal strength case. This modified angle extractor has only a small performance degradation compared with the known average signal strength case, but it performs much better than the monopulse ratio based estimator. An algorithm to calculate the accuracy of the estimated angle (or height) is also presented. This angle extractor reduces the root-mean-square error (RMSE) by more than 50% in the signal processing stage when used in a low flying target tracking scenario. The same algorithm can be used to track sea skimmers.     

Experimental Results of the Complex Indicated Angle Techique for Multipath Correction

The complex indicated angle technique, applicable to monopulse radars, is being investigated as a means of overcoming the serious degradation of elevation measurement caused by multipath when the target is within a beamwidth or so of the horizon. This technique makes use of the quadrature-phase component of the normalized difference signal, as well as the in-phase component. Results of analysis and computer simulation have been published previously. This paper reports results of a test program using a slightly modified AN/FPS-16 monopulse tracking radar and a simulated target. The results to date indicate a potential for high accuracy, though there are limitations as to the applications for which the technique appears feasible. A computer program has been developed to perform the elevation estimate and to resolve ambiguities.     

Detecting the Presence of Target Multiplicity

A method is discussed for detecting the presence of multiple targets in the radar antenna beam. It is assumed that the targets are unresolvable in range, Doppler, and angle using conventional monopulse resolution techniques. The basic approach taken is a generalization of the "quadrature" method, with significantly enhanced performance in the case when multiple pulses are integrated into a single solution. Detection and false alarm probabilities are derived analytically and the receiver operating characteristics are graphed. This study was performed for application to angle processing in a frequency agile automatic tracking radar, but the underlying concept is general and has applications outside this area.     

不完全量测下一类非线性光电跟踪系统滤波器设计

 随着不完全量测条件下探测概率的下降,传统光电跟踪系统的跟踪性能显著降低。为此,本文考虑将俯仰和偏航两个方向的角速度量测引入传统光电跟踪系统,并设计了不完全量测下基于置信度融合的目标跟踪滤波器。首先针对这类新型的光电跟踪系统建立了系统的量测模型,利用嵌套条件方法推导了转换量测误差前两阶矩的一致性估计;然后针对位置探测通道与角速度探测通道的4种数据探测情形设计了4个子滤波器,并根据探测通道的探测情况计算出各子滤波器的置信度,进而对各子滤波器的输出按置信度进行加权融合,得到了跟踪滤波器的全局输出;最后给出了非线性跟踪系统统计意义下的Cramer-Rao下界(CRLB)。Monte-Carlo仿真表明：在不完全量测下,相比传统光电跟踪系统,附加角速度量测的光电跟踪系统的跟踪性能有了显著提高,并且滤波器估计误差均方差(RMSE)已逼近非线性跟踪系统统计意义下的CRLB。     

Angle estimation for two unresolved targets with monopulse radar

Most present-day radar systems use monopulse techniques to extract angular measurements of sunbeam accuracy. The familiar "monopulse ratio" is a very effective means to derive the angle of a single target within a radar beam. For the simultaneous estimation of the angles of two closely-spaced targets, a modification on the monopulse ratio was derived in (Blair and Pearce, 2001), while (Sinha et al., 2002) presented a maximum likelihood (ML) technique via numerical search. In this paper it is shown that the ML solution can in fact be found explicitly, and the numerical search of ((Sinha et al., 2002) is unnecessary. However, the ML solution requires the signal to noise ratio (SNR) for each target to be known, and hence we generalize it so it requires only the relative SNR. Several versions of expectation maximization (EM) joint angle estimators are also derived, these differing in the degree to which prior information on SNR and on beam pattern are assumed. The performances of the different direction-of-arrival (DOA) estimators for unresolved targets are studied via Monte Carlo, and it is found that most have similar performance: this is remarkable since the use of prior information (SNR, relative SNR, beam pattern) varies widely between them. There is, however, considerable performance variability as a function of the two targets' off-boresight angles. A simple combined technique that fuses the results from different approaches is thus proposed, and it performs well uniformly.     

Radar Tracking of Low-Altitude Targets

The antenna elevation control signal and the associated staticequilibrium equations are analyzed for the case of tracking of lowaltitude targets for both monopulse and conical-scanning radar. Three possible equilibrium positions of the radar antenna under static operating conditions are ascertained. The static solutions suggest certain dynamic solutions that are likely to arise under practical conditions. The extreme values of the pointing error are shown in graphical form.     

Monopulse radar based on spatiotemporal correlation of stochastic signals

The theory and technique of angle-of-arrival (AOA) estimation using random-noise or other stochastic transmit waveforms is addressed. The additional uncertainties induced by signal itself and the statistical complexity of the received signals result in major challenges. The statistical properties of the random-noise interferometer and monopulse radar system are studied and compared theoretically using an approximation method. Furthermore, a random-noise coherent correlation receiver (CCR) architecture is proposed. The concept of mean monopulse characteristic curve (MMCC) is introduced. Experimental results using an X-band random-noise monopulse radar system validate the theoretical predictions of random-noise monopulse characteristics and suggest potential applications such as surveillance, imaging, and maneuvering target tracking.     

机载雷达中的单脉冲技术

 本文总结机载雷达中单脉冲技术的研究和应用,着重讨论幅度比较系统的关键技术,给出有关数据。 机载雷达中的单脉冲技术着眼于抗干扰性能和特殊应用。这些应用包括空对地测距、角分辨力改进、地形防撞。本文阐述了这些特殊应用。     

Multipath Angle Error Reduction Using Multiple-Target Methods

The usual methods of reducing multipath angle errors in monopulse tracking radar achieve only limited success because they do not attack the root of the problem. A more correct approach is to accept the multipath signal as a second target and utilize a two-target signal processor which angle tracks both wavefronts. The processor will decouple the return signals so that relatively interference-free data on both waves are obtained. In this paper a signal processor for separating signal from (N - 1) multipath components is developed. The processor is then specialized to the case of only one multipath signal and evaluated by a computer simulation. Data show that large improvements are possible as compared to the usual monopulse tracking system. In particular, the usual large bias errors at low elevation angles are eliminated. Tracking precision compares favorably with the theoretically best possible for two-target tracking systems.     

Further Results on Multipath Angle Error Reduction Using Multiple-Target Methods

The two-target technique proposed by the author in an earlier paper [1] for reducing radar multipath angle tracking errors has been simulated on a digital computer assuming an actual closed-loop system. When tracking with noise, the technique provides angle error performance which compares quite favorably with the expected performance given in [1] Furthermore, the large bias errors usually encountered in normal monopulse systems at low elevation angles are removed. Results of typical tracks are given, both for the method of [1], and for a modified version of the method which applies primarily to shipboard radar systems. Some results on loss of lock are also presented.     

Self-calibrating SSR monopulse receiver

An extension of the monopulse technique for estimating the target azimuth in a secondary surveillance radar (SSR) is considered. The idea is to associate in pairs monopulse measurements coming from the amplitude processor (AP) at the dwell time processing level. This allows the automatic compensation of the bias errors due to the misalignments in the receiver channels, thus eliminating the necessity for periodic system calibration. This dual-pulse technique also allows for the practical use of the dot product receiver as a modification of the AP receiver. This, in turn, implies that the variance of each dual-pulse estimate is uniformly maintained at the monopulse maximum-likelihood level over the whole off-boresight angle (OBA) range