共查询到20条相似文献,搜索用时 312 毫秒
1.
2.
采用非线性系统扩展线性化方法设计飞控系统 总被引:2,自引:0,他引:2
利用非线性系统的扩展线性化方法设计具有大迎角的非线性飞行控制系统。在系统的静态平衡点族上进行线化及调节器设计并直接积分得到非线性控制律,同时利用等效系统法验证飞行品质。整个设计过程较简便,控制律便于实现,飞机的失速迎角有较大提高,飞行品质也是令人满意的。 相似文献
3.
针对拦截机动目标问题,提出了一种新的具有强鲁棒性的非线性变结构末制导律。基于弹目相对运动学的非线性关系,将目标机动作为系统扰动,建立了弹目相对运动的数学模型。并基于零化弹目视线角速率的思想,利用一种新的双幂次趋近律设计方法,得到了非线性变结构末制导律。该方法利用Lyapunov稳定理论,严格证明了制导系统的全局渐近稳定性。数字仿真结果表明,所设计的制导律与比例导引律相比,对高速大机动目标具有很强的鲁棒性和适应性,并能获得良好的制导精度。 相似文献
4.
5.
6.
推力矢量控制与飞机过失速动仿真研究 总被引:1,自引:2,他引:1
非线性动态逆为非线性系统控制律的设计提供了一种重要手段,针对过失速机动飞机探讨了非线性动态逆方法飞行控制系统设计中的应用。根据非线性动态逆的特点将飞机的动态特性为为快慢不同的状态变量。对快变量应用非线性动态逆进行控制律设计是将飞机气动控制面和推力矢量控制作为输入;慢状态为量控制律的设计是利用状态变量作为输入。并采用伪逆的优化计算方法对各控制面的以限分配进行了搪塞。“Cobra”和“Herbat”两 相似文献
7.
8.
9.
针对一类存在外界干扰和未建模动态的非线性不定系统,特别是含线性定常的参数不确定性及状态关联的非线性不确定性系统,应用直接自适应控制方法,设计了基于李雅普诺夫稳定性理论的鲁棒自适应控制律和修正律;应用李雅普诺夫稳定判据,对系统的稳定性进行了分析,证明所设计的控制律和修正律具有较强的鲁棒稳定性。 相似文献
10.
分叉分析方法在大迎角控制律设计中的应用 总被引:3,自引:0,他引:3
在充分了解本体静不稳定飞机大迎角非线性数学模型的分叉特性的基础上, 以分叉分析方法作为指导, 采用特征结构配置方法设计纵向控制律和调参的横航向控制律。结果显示, 不期望的分叉行为得到抑制,飞机稳定和解耦的飞行范围得以延伸。 相似文献
11.
数字式颤振主动抑制系统的研究 总被引:4,自引:1,他引:3
介绍了数字式颤振主动抑制系统的控制律综合、风洞实验及其工程特性。控制律的设计采用连续域离散化的方法。对4种不同控制律进行了风洞实验,验证了理论计算与实验设计的正确性。实验中控制律用微机和工业控制机联合实现;还根据工程应用的观点提出了颤振主动抑制系统应该具有的特性。对一个与实际飞机动力相似的机翼/外挂系统的研究表明,颤振速度提高了20%左右,并且系统的工程特性也是基本可行的。 相似文献
12.
攻击地面固定目标寻的导弹的一体化制导与控制(英文) 总被引:4,自引:1,他引:3
This paper presents a scheme of integrated guidance and autopilot design for homing missiles against ground fixed targets. An integrated guidance and control model in the pitch plane is formulated and further changed into a normal form by nonlinear coordinate transformation. By adopting the sliding mode control approach, an adaptive nonlinear control law of the system is designed so that the missile can hit the target accurately with a desired impact attitude angle. The stability analysis of the closed-loop system is also conducted. The numerical simulation has confirmed the usefulness of the proposed design scheme. 相似文献
13.
航空发动机双余度控制规律设计方法 总被引:1,自引:2,他引:1
提出了航空发动机双余度控制规律设计概念和一种利用双余度控制规律作为控制传感器信号故障处理策略的方法;建立了备份控制规律设计方法和设计原则,应用于某高性能涡扇发动机双余度控制规律设计研究之中.研究结果表明:双余度控制规律可以实现无扰动转换,重构控制回路,提高发动机的任务可靠性.该方法可以应用于配装数字式电子控制系统的各类发动机. 相似文献
14.
主要讨论了起飞着陆控制律构型选择的原则,提出了在飞行品质评定时,应采用以等效拟配系统为基础,同时用其它一些参考准则,进行评估和迭代设计,使带电传飞行控制系统飞机在着陆期间具有满意的飞行品质。最后,给出了一个简化的某数字电传系统起飞着陆控制律设计的例子。 相似文献
15.
《Aerospace Science and Technology》2007,11(2-3):136-145
Existing computational transonic aeroservoelastic researches focus on directly coupling the structural dynamic equations, CFD solver and servo system in time domain, study the effect of the given feedback control laws on the responses of the aeroelastic system. These works have not involved the design of the flutter active control law. The non-linearity of transonic flow brings great difficulties to aeroservoelastic analysis and design. Recent research of the unsteady aerodynamic reduced order models (ROM) based on CFD provides a challenging approach for transonic aeroservoelastic analysis and design. Coupling the structural state equations with the aerodynamic state equations of the wing and the control surface based on the ROM, we construct a transonic aeroservoelastic model in state-space. Then the sub-optimal control method based on output feedback is used to design the flutter suppressing law. The study first demonstrates the open loop of the Benchmark Active Controls Technology (BACT) wing. The computational results of the CFD direct simulation method and the ROM analysis method are both agree well with the experimental data. Then both the closed loop time responses and the flutter results by ROM technique are compared with those of numerical aeroservoelastic simulation based on Euler codes to validate the correctness of the design method of the control law and aeroservoelastic analysis method. An increase of up to 20% of the speed index can be achieved by the control law designed by sub-optimal control method for this model. 相似文献
16.
功率提取法在涡喷发动机起动特性模拟及控制规律设计中的应用 总被引:3,自引:8,他引:3
针对涡喷发动机起动控制规律的特点,将涡轮发动机加、减速控制规律设计的功率提取法模型,应用于航空涡喷发动机起动控制规律的设计.结合低转速部件特性预测方法和改进的功率提取法,给出了涡喷发动机起动控制规律设计的约束条件和设计步骤.该模型可以用于起动带转过程中起动机带转功率的预测,以及全包线范围内、全气候条件下的涡喷发动机起动控制规律的快速、准确设计.计算结果表明,根据功率提取法模型设计的起动控制规律与实际的发动机起动控制规律吻合较好,该方法具有较好的工程应用价值. 相似文献
17.
针对多操纵面布局飞机,提出一种基于Kriging建模技术和鲁棒自增益调参控制器设计技术的大包线飞行控制系统设计方法.通过采用力矩控制形式,使调参控制器的输出为三轴所需力矩系数,从而便于采用力矩控制分配技术来发挥冗余操纵面的潜力,并提高系统鲁棒性;在设计使系统性能指标最优的控制律时,通过建立控制系统性能参数的Kriging近似模型,避免了多次进行耗时的控制器设计,提高了设计效率. 相似文献
18.
讨论了一类非线性系统的变结构解耦控制在再入飞行器的应用,变结构解耦控制号输入输出线性比相结合得到的控制规律,可对象模型的不确定有鲁棒性,对于再入飞行器再入段存在的多变量非线性和参数不确定,应用了相应的变结构解耦控制的方法,讨论了其滑模面的构造方法和解耦控制条件,在姿态控制中保证了姿态跟踪期望值,在轨迹跟踪中,设计了内外回路在控制律,内回路运用变结构解耦控制保持姿态稳定,外回路通过设计比例微分控制保 相似文献
19.
随着武器作战样式的变革,带约束条件下的末制导律研究受到了越来越广泛的关注。评述了近年来约束条件下的末制导律的研究新进展,对目前约束条件下的末制导律设计进行了详细的研究,分析了各种方法的优缺点。在此基础上,对比给出了多约束条件下的末制导律设计的难题以及可能解决的途径。 相似文献
20.
Both the design process and form of the three-dimensional (3D) suboptimal guidance law (3DSGL) are very complex. Therefore, we propose the use of two-dimensional (2D) guidance laws to meet the guidance requirements of 3D space. By analyzing the relationship between the flight-path angle and its projections on OXY and OXZ planes, we obtain the ideal design requirements of the guidance laws. Based on the requirements, we design a 2D suboptimal guidance law used in the horizontal plane; combining the 2D vertical suboptimal guidance law, we create a whole ballistic simulation of six degree-of-freedom. The results are compared with those using other three guidance modes in the case of large windage of the initial azimuth angle. When the proportional navigation guidance (PNG) law is used in the horizontal planes, the landing angle will obviously decrease. With the proposed guidance mode, the large landing angle can be realized and meet the guidance precision requirements. Moreover, the required overload can decrease to meet the control requirement. The effects of the proposed guidance mode are close to that of 3DSGL despite its very simple form. 相似文献