高速加工技术的发展趋势

高速加工技术在以下几个方面会得到更快的发展: 1、扩大材料的加工范围,从铝合金加工扩大到钢材的高速加工,解决钢材高速加工存在的技术难点。 2、用干式切削替代湿式切削。解决高速加工使用大量冷却液造成对自然环境的污染问题,进一步研究开发适用于干式切削的新型刀具材料,研究开发干式切削加工中心。     

PCBN刀具切削力及摩擦系数试验研究

对PCBN刀具车削加工时的切削力及摩擦系数与切削用量的关系进行试验研究,并与YN10硬质合金刀具对比,结果表明:PCBN刀具特别适于高速条件下的干式切削加工,而且为了提高生产率,采用大进给量切削比大切深切削较省力又省功率.     

Duratomic(R)金刚甲技术在车削材质等级TP0500上的应用

高速加工、干式加工等技术和难加工工件材料的发展将不断向切削刀具制造商施压,要求他们开发出能提供更高速度、更长刀具寿命以及经得住严峻加工工况考验的新产品.     

数控高速切削加工技术（下）

数控高速切削加工技术（下）北京航空工艺研究所林胜４用于高速切削的新技术近年来，许多新技术在金属切削加工设备和装置上得到了实际应用，有力地促进了高速切削加工技术的发展。１．高速主轴数控高速切削加工是通过主轴转速范围为１００００～１０００００ｒ／ｍｉｎ，...     

数控高速切削加工技术（上）

高速切削加工技术与常规切削加工相比，在高精度、高质量零件加工及提高生产率方面具有明显优点，该技术的发展促进了数控高速切削加工技术的开发、研究和工业应用，本文将介绍高速切削加工技术的特点、发展现状和趋势     

磨刀四十载助力高端制造业——记高效切削及刀具技术实验室

哈尔滨理工大学高效切削及刀具实验室长期从事切屑折断控制技术、难加工材料高效切削技术、硬态干式切削技术、高速切削加工技术等方面的研究开发工作,在国内外具有一定的影响。实验室有高效切削及刀具国家地方联合工程实验室、机械工业切屑控制及高效刀具技术重点实验室、先进加工技术与智能制造黑龙江省重点实验室、现代制造技术与刀具开发黑龙江省高校重点实验室等支撑平台。通过基础研究应用化、应用研究实用化、科技成果价值最大化、创新技术和产品的产业化,共同构建了紧密的高效切削与刀具技术的产业化联盟。目前实验室形成了以科研为主体、产学研相结合的技术创新体系,逐步发展成为了装备制造领域关键技术供给和研究成果转化的支撑平台。     

高速切削刀具新技术

高速切削已经成为切削加工的主要发展方向。为真正实现切削加工的高速化,不仅要研究开发与高速切削相适应的刀具材料,还要不断改进刀具结构及刀具监控系统。本论坛汇集专家、用户和厂商等多方观点,力求为高速切削刀具的发展和应用提供一些借鉴。     

基于温度信号的高速干铣削试验研究

本文应用红外测温系统对高速铣削过程中切削温度的动态变化进行在线监测.给出了铝合金高速铣削过程中不同磨损程度和不同材料的刀具加工时对应的切削温度以及切削温度随切削速度的变化规律,其结论有助于指导铝合金高速铣削加工、优化高速切削工艺.     

高速桥式机床的结构设计与优化

高速切削技术是近些年迅速发展起来的一项先进制造技术,它不但极大地提高了加工效率,而且显著地改善了零件的加工精度和表面质量.由于高速切削时产生的切削力小,发热少,残余应力以及零件变形较小,因此在航空、航天等领域得到了广泛应用.与CNC技术一样,高速切削技术是加工制造业中的又一技术革新.高速切削成为一种新的切削加工理念,被认为是21世纪加工工艺中最重要的一种.     

先进刀具技术现状分析及发展趋势

高速切削作为先进制造技术的一项全新的共性基础技术,已经成为现代切削加工技术的重要发展方向。先进刀具在机械加工中起到了越来越重要的作用,选择合理的刀具材料、涂层及几何参数将是实现高效切削加工的关键。因此,刀具作为切削加工工艺系统中最活跃的因素已经成为实现高速切削加工的必要条件。     

高强高韧Al-Cu-Li-Mg-Zr-Zn-Mn合金热变形行为

在Gleeble～1500热模拟实验机上，采用高温等温压缩，应变速率为0．001～10／s，变形温度为360～520％，对通用型铝锂合金在高温压缩变形中的流变应力行为进行了研究，分析了其高温变形的物理本质。结果表明：在等应变速率下，真应力随温度的升高而降低；在相同的变形温度下，随应变速率的增加，流变应力水平升高。在较低的变形速率及较高的变形温度条件下热变形时，通用型铝锂合金容易发生动态再结晶。而变形速率较高，变形温度较低时，通用型铝锂合金可能发生剪切变形，热变形过程中则主要发生动态回复。     

P2P模式的系统结构研究

本文首先介绍了什么是P2P和它的基本运作模式。详细阐述P2P模式的主要形式及其相应的系统结构。     

Covariance Matrix for ?-?-? Filtering

Closed-form expressions are derived for the output noise response of an ?-?-? filter in steady-state operation with constant measurement noise statistics. To the author's knowledge such expressions have been unavailable until now. These formulas are useful for target tracking applications.     

通用型大气数据计算机自动测试系统的研制

针对我军用飞机大气数据计算机的测试问题,在全面分析了国产及俄制大气数据计算机测试需求的基础上,采用PCI总线技术,提出了一种满足系统测试需求的通用型硬件设计方案并自行研制开发了关键的硬件电路;在系统软件设计过程中采用面向对象设计思想,继承并封装了全部检测代码,根据测试需求分析的结果,修改、补充了新的属性和服务,增强了自动测试系统运行的稳定性和可靠性。     

Who is who in Algol-land ?- Part I -

We computed the evolution through case A mass transfer for 8 systems with mass of the primary equal to 3 and 5 M₀, mass ratios 0.7 and 0.9, and different periods. To this we added similar results from Packet (1988) for M_i = 9 M₀, q_i = 0.6, P_i = 1.62 d.During the mass transfer two competing mechanisms in the gainer decide on the evolution of the system: the rejuvenation of this star as the increasing convective core mixes fresh hydrogen into the inner regions, and the acceleration of nuclear burning, responding to the increasing mass.In all the cases the net result is a faster decrease of the central hydrogen content compared to the mass losing star. The secondary fills its own critical Roche lobe and reversed mass transfer starts.From our results and those of Nakamura and Nakamura (1984), we find that reversed mass transfer occurs after core hydrogen burning of the secondary (case A₁B₂) approximately for periods larger than 1 d (M_1i = 3 M₀) to 2 d (M_1i = 13.4 M₀). For smaller periods this happens before the gainer ends its core hydrogen burning (case A₁A₂).     

MJS-8型30秒计时器软件的设计

MJS-8型30秒计时器,采用8051单片机,利用可编程通用,键盘和显示器接口器件8279来完成整个系统。本文主要介绍软件部分的设计。     

轻型高温快卸卡箍的研制

高温导管连接快卸卡箍技术性能要求较高,制造工艺较复杂。本文介绍应用橡胶胀形新工艺．解决弹性凸缘、卡圈两个关键件的成形难题,用此工艺生产的卡箍试验件,通过多项性能试验证明,具有较高的可靠性。     

Who is who in Algol-land ? - Part II -

In part I (De Greve and Packet) we have investigated the occurrence of reversed phases of mass-transfer during Case A evolution in close binaries. If the initial period of a system is shorter than 1–2 days (Early Case A) the reversed phase starts before core hydrogen exhaustion of the gainer (part I). This type of evolution is characterized by at least two phases of slow mass-transfer.We have computed the evolution of four Early Case A systems with initial masses of the loser equal to 3 Mo and 5 Mo. These four systems start mass-exchange when Xc of the primary has decreased to 0.525 (75% of its initial value). They all experience two phases of slow mass-transfer.We find that both phases have about the same duration for all systems. The mass ratios are clearly distinct, being closer to unity during the first phase. In the Hertzsprung-Russell, mass-radius and mass-luminosity diagrams both components remain close to the main-sequence band during slow mass-transfer. Evolution as an Algol is ended when both components overflow their outer critical surface after a second reversal of the mass-transfer.Observed Algol systems evolving in Early Case A are scarce. A search thruogh the catalogue by Giuricin et al. gives us the following candidates: X Tri, SX Aur and V Pup. Based on their mass ratios, SX Aur can tentatively be assigned to the first phase of slow mass transfer and X Tri to the second phase. For V Pup (which is more massive) this choice can not be made with certainty.     

Who is who in Algol-land ? - Part II -

In part I (De Greve and Packet) we have investigated the occurrence of reversed phases of mass-transfer during Case A evolution in close binaries. If the initial period of a system is shorter than 1–2 days (Early Case A) the reversed phase starts before core hydrogen exhaustion of the gainer (part I). This type of evolution is characterized by at least two phases of slow mass-transfer. We have computed the evolution of four Early Case A systems with initial masses of the loser equal to 3 Mo and 5 Mo. These four systems start mass-exchange when Xc of the primary has decreased to 0.525 (75% of its initial value). They all experience two phases of slow mass-transfer. We find that both phases have about the same duration for all systems. The mass ratios are clearly distinct, being closer to unity during the first phase. In the Hertzsprung-Russell, mass-radius and mass-luminosity diagrams both components remain close to the main-sequence band during slow mass-transfer. Evolution as an Algol is ended when both components overflow their outer critical surface after a second reversal of the mass-transfer. Observed Algol systems evolving in Early Case A are scarce. A search thruogh the catalogue by Giuricin et al. gives us the following candidates: X Tri, SX Aur and V Pup. Based on their mass ratios, SX Aur can tentatively be assigned to the first phase of slow mass transfer and X Tri to the second phase. For V Pup (which is more massive) this choice can not be made with certainty.