共查询到20条相似文献,搜索用时 171 毫秒
1.
2.
民航空中交通管理系统的核心是信息处理,根据民航用空中交通管理系统与军方用空中交通管理系统的不同特点,通过对一个可能的ADS-SSR数据融合模型的探讨,给出了此模型的具体算法。本算法综合了两者的优点,可实现整个飞行过程的无间断的可靠的监视,并且在高密度终端区提供必要的数据精度 相似文献
3.
基于VAPS、FLSIM软件建立了飞行管理系统控制显示组件(CDU)和导航模型实时仿真系统.在满足实时性前提下,给出了基于FLSIM的导航模型设计方法.建立了一个通用的、基于网络连接的飞行管理系统的CDU和导航模型.实现了飞机管理系统中控制显示组件的动态图形仿真以及在实时环境中飞行计划的生成.给出了航线导航的设计方法,实现了导航信息数据的实时传输. 相似文献
4.
张雪利 《西安航空技术高等专科学校学报》2008,26(4):79-80
阐述了高校学报交流的意义、重要性和必要性。提出了交流学报应纳入图书馆的统一管理系统。进而实现学报的宣传服务、检索服务、咨询服务和多元化的信息服务。 相似文献
5.
介绍了在统一过程模型的基础上应用UML进行系统分析、设计,建立系统模型的简洁方法。文中通过对一个教务管理系统的建模过程,运用UML语言的图形表达方式,从需求分析,到详细设计,及类与类之间的消息传递关系,给出了该方法的应用细节,并对该方法进行了验证。实践表明,在基于统一过程模型体系结构为中心的建模方法指导下,应用UML语言丰富的可视化表达元素,可以清晰、快速地定义面向对象的软件系统模型。 相似文献
6.
简要介绍了飞机技术状态管理系统的网络模型与开发方案设计,详细论述了系统的工程更改管理、数据分析、数据查询与报表定义等功能模块的设计。将网络系统建模、动态服务器网页设计、远程数据对象与VBA Office Web组件编程技术开发的飞机技术状态管理系统,成功应用于型号研制中。 相似文献
7.
本文就对如何发展基于人工智能的自动化空中交通管理系统的迫切性进行了探讨,阐述了现代一体化空管新理念,提出了基于人工智能的自动化空中交通管理系统的模型。对于引入自动化以后,空中交通管制系统中人的因素和如何处理和防止出现应急情况进行了初步研究。 相似文献
8.
飞行试验计划管理系统初探 总被引:2,自引:0,他引:2
本文简要介绍了飞行试验计划管理系统可用于飞行试验中去的必要性,以及飞行试验计划系统在国外的应用情况,结合我国实际,提出适合我院飞行试验的计算管理系统研制初步模型,为今后我院进一步应用与全面开发该系统打下了良好的基础,对飞行试验进行自动综合的科学管理具有特别重要的实际意义。 相似文献
9.
10.
为解决航空发动机机载健康管理系统正向设计流程不清晰、设计需求不明确、需求设计对应及追溯不规范的问题,在对
比国内外现有健康管理功能架构体系的基础上,结合正向设计中需求捕获、需求分析和功能分配,研究了由上到下的航空发动机
健康管理系统正向设计基本流程,开发了航空发动机健康管理正向设计流程平台,实现了机载功能架构的设计。引入基于模型的
系统工程思想,采用面向对象的工程设计思路,建立功能目标量化、功能描述、模块定义等图形化设计方法,验证了该设计方法在
硬件设计中的可用性。通过研究航空发动机机载健康管理系统设计方法并分析机载功能组成,建立了可扩展的流程平台,基于模
型设计方法建立了可用的硬件设计模型,可为航空发动机机载健康管理系统设计提供参考。 相似文献
11.
12.
《中国航空学报》2023,36(8):128-147
Active control of aero-engine turbine tip clearance is one of the best chances for engine performance uplift currently. To do that, the first requirement is real-time measurement of tip clearance in aero-engine working environment. However, turbine complexity makes it unlikely for tip clearance sensors to be loaded. In recognition of that, this paper proposed a model-based method for tip clearance measurement. Firstly, by considering previously wrongly neglected factors such as load deformation, a mathematical model to monitor dynamic tip clearance changes is built to improve calculation accuracy. Then, after clarifying the coupling relationship between engine models and tip clearance models, this paper builds a component-level mathematical model integrating dynamic characteristics of turbine tip clearance, which helps realize accurate measurement of tip clearance in working environment. How tip clearance affects turbine efficiency is studied afterwards and reported to aero-engine model, so as to mitigate performance difference between aero-engine model and real engines caused by turbine tip clearance. Lastly, by hardware-in-the-loop simulation, tip clearance model demonstrates 15.9% better accuracy than previously built models in terms of turbine centrifugal deformation calculation. As tip clearance measurement model takes averagely 0.34 ms in calculation, meeting the operation requirement, it proves to be an effective new way. 相似文献
13.
介绍和分析了2种主流访问控制技术——基于角色的访问控制及基于任务的访问控制。针对现有模型的不足,结合某分布式系统的复杂访问控制需求和处理特点,建立了基于任务—角色的访问控制TRBAC模型,阐述了模型对最小权限原则、权限分离原则、角色层次关系的支持。 相似文献
14.
15.
Shen Zhang 《中国航空学报》1995,(3)
DESIGNOBJECTMODELANDDESIGNPROCESSMODELOFCOMPUTERAIDEDAIRCRAFTCONCEPTUALDESIGNSYSTEMShenZhang(AircraftCADResearchCenter,Beijin... 相似文献
16.
针对某轿车减重的项目要求,利用有限元灵敏度优化分析技术,基于经试验验证后的有限元模态分析模型建立灵敏度优化分析模型,用MSC.Nastran求解得到灵敏度矩阵和设计变量的迭代历史过程。结合灵敏度分析对基础模型减重,并对减重后的模型进行刚度、碰撞等相关性能的验证,完成轻量化分析研究。 相似文献
17.
18.
19.
20.
YANG Shu-bo WANG Xi LONG Yi-fu LI Zhi-peng HU Zhong-zhi YIN Kai ZHANG Rong 《航空动力学报》2016,31(12):3042-3053
Since ambient conditions vary in a wide range within the full flight envelope, the existing piecewise linear model (PLM), which is based on sea-level static condition with use of corrected parameters for other points in the flight envelope, cannot meet the accuracy for replacing the nonlinear model. To obtain more accurate linear models, a method of partitioning the flight envelope over a grid of Mach number and altitude boxes was suggested. Then, a set of linear models for a given operating condition was selected by picking the nearest (Mach number, altitude) box in the flight envelope. Through the selected set of linear models, interpolating for power level based on a weighted sum of corrected rotor speeds can obtain a linear model with acceptable accuracy. Simulation results of different points within the full flight envelope showed that the maximum error between nonlinear model and the existing PLM was more than 50%, while the maximum error between nonlinear model and the improved PLM was within 8%. It is concluded that the improved PLM performs accurately, especially under the non-standard conditions. In addition, the improved PLM can satisfy the real-time requirement better than the existing PLM. 相似文献