Theoretical studies of shock-initiated detonations

The dynamics of shock propagation have been studied theoretically for a variety of two-dimensional lattices. The approach used is based on molecular dynamics and hinges on the exact numerical solution by computer of the equations of motion for the individual atoms or molecules in each lattice. Shocks have been launched into the lattices under study by methods designed to simulate flyer-plate impact. Two different interatomic potentials have been used, one endothermic and one net-exothermic. For both types of potential, a shock launched at one side of the lattice will spall a group of atoms off the other side. However, the subsequent behavior of the two types of lattice is very different. For endothermic potentials, after the initial atomic spall, the residual lattice is quiescent with little further activity. For net-exothermic potentials, the initial atomic spall injects additional energy into the system in such a manner that subsequently further spall occurs at both sides. Once this new spall is initiated, it leads rapidly to further bond breaking and explosive disintegration of the system.     

上海航天技术研究院在神舟飞船研制中取得的科研成果

通过神舟飞船的研制，上海航天技术研究院在飞船电源分系统、推进分系统、测控与通信分系统、推进舱等关键系统和产品的研制工作中探索并总结出了国内领先的专业技术成果，确保了神舟飞船研制目标实现。     

Optimal impulse point-to-elliptical orbit transfers of a spacecraft

The paper deals with energetically optimal multi-impulse transfer of a spacecraft in the central Newtonian gravity field near a planet. At the initial state of the transfer the distance from the spacecraft to the center of attraction, its radial and transversal velocity projections are known. At the end of the transfer the spacecraft must be located in the elliptical orbit with the given area and energy constants. The distance from the spacecraft to the center of attraction is bounded above and below, the transfer time being unspecified. The initial orbit intersects the inner boundary of the given ring.All the optimal solutions have been obtained by analytical way. A number of new solutions has been found for the given problem in comparison with the case of the transfer from the orbit at the free initial point.Up to five impulses can be applied on the optimal trajectories. The numerical simulation of the problem is carried out. It shows that all obtained solutions give not only local but global optimal energetic input on the corresponding conditions.     

载人航天器的精细化软件研制技术管理方法

载人航天器软件研制具有技术新、难度大、新研配置项多等特点,必须研究一种新型的软件技术管理方法,以确保软件产品质量受控。文章介绍的精细化管理方法是在现有软件研制规范的基础上,通过软件研制工作的阶段化以及软件管理工作的划分,实现了软件的精细化管理。“天宫一号”目标飞行器软件研制工作的实践证明:该方法符合载人航天器型号研制的实际,可保证软件产品质量满足飞行任务要求。     

航天器真空热试验测控系统应用现状及发展趋势

航天器真空热试验是航天器研制过程中必不可少的试验项目。文章阐述了航天器真空热试验测控系统的特点和面临的挑战,总结归纳了航天器真空热试验测控系统的应用现状,分析展望了航天器真空热试验测控系统未来的发展趋势。     

Optimization of passive orbit with the use of gravity maneuver

A high-precision method of calculating gravitational interactions is applied in order to determine optimal trajectories. A number of problems, necessary for determination of optimal parameters at a launch of a spacecraft and during its flyby near celestial bodies, are considered. The spacecraft trajectory was determined by numerical integration of the equations of passive motion of the spacecraft and of the equations of motion for planets, the Sun, and the Moon. The optimal trajectory of the spacecraft approaching the Sun is determined by fitting its initial conditions.     

设备外形与布局优化的关系

目前国内航天器研制中,各分系统单机设备结构外形、机械接口等很大程度上制约了航天器整体的总装布局优化工作,产生了大量附属的总装直属件,这不仅引起整个航天器重量的增加,而且给后续的电缆和管路走向优化设计造成障碍。文章通过借鉴“联盟号”飞船设计思路,提出了以赋形设计减少总装直属件的数量布局优化设计方法。     

Study of the Microphonics for Prospective Space-Based Neutron and Gamma-Ray Detectors and Methods for its Suppression

The results of testing a number of space-based detectors that contain PMTs or high-voltage electrodes for the noise from the microphonics that occurs in the signal path due to external mechanical action have been presented. A method for the vibration isolation of instruments aboard a spacecraft has been proposed to reduce their responsivity to vibrations.     

单航天器无需机动对星座多星交会轨道全解

文献[1,2]已研究了单航天器无需变轨对Walker星座多星交会的轨道设计,在此基础上,依据交会点必是轨道交点的轨道特性,提出了轨道全解的解析法,可给出该轨道所能够交会卫星的最大数目,研究结果可为单航天器无需大机动变轨对星座多星接近的轨道应用提供理论参考。     

基于磁场梯度张量的航天器内部多磁场源探测技术

基于磁场梯度张量的探测技术具有高分辨率、高精度等优点,是航天器多磁源分辨的有效方法。文章建立了航天器磁场源模型,提出了航天器多磁场源模型拟合方法,利用磁场梯度张量的主不变量的极值确定磁场源个数和水平位置,然后联合欧拉方程计算磁场源深度,完成航天器内部多磁场源仿真与计算,分辨率最高可达0.012 m,满足工程需求。该研究开辟了航天器内部多磁场源目标探测的新途径。     

Optimization of the trajectory of the spacecraft insertion into the system of heliocentric orbits

The possibility of the spacecraft insertion into the system of operational heliocentric orbits has been analyzed. It has been proposed to use a system of several operational heliocentric orbits. On each orbit, the spacecraft makes one or more revolutions around the Sun. These orbits are characterized by a relatively small perihelion radius and relatively high inclination, which allows one to investigate the polar regions of the Sun. The transition of the spacecraft from one orbit to another has been performed using an unpowered gravity assist maneuver near Venus and does not require the cruise propulsion operation. Each maneuver transfers the spacecraft into the sequence of operational heliocentric orbits. We have analyzed several systems of operational heliocentric orbits into which the spacecraft can be inserted by means of the considered transportation system with electric propulsion (EP). The mass of the spacecraft delivered to these systems of operational orbits has been estimated.     

Economics of telecommunications space segments

This paper proposes a complete model for assessing the economics of telecommunications satellite systems, accounting for spacecraft development and manufacturing, launch and operations in orbit. This allows to account for such parameters as the mass and lifetime of the satellites, the number and type of payloads, the number of satellites procured and launched, the spare policy, the launch vehicle, the insurances, the satellite average MTTF and the management of the space segment efforts.

The model is divided into four parts: the spacecraft mass model, the spacecraft procurement cost model, the MTTF model and the space segment cost-effectiveness model. It provides for the rapid solution of a number of problems within a wide range of parameters such as assessing the influence on space segment economics of —certain satellite technologies, —satellite and payload mass, —number of payloads per spacecraft, —satellite lifetime, or —spare policy.     

载人航天器热控分系统噪声控制

随着载人航天器越来越复杂,热控分系统所用到的高速旋转设备越来越多,所产生的噪声将影响航天员的身体健康,因此载人航天器的噪声控制非常迫切。文章通过热控分系统的布局设计以及单机设备的降噪优化等措施,找到了有效降低整个载人航天器热控分系统噪声水平的方法,可供类似的载人航天项目的热控设计参考。     

航天器AIT模型与试验有效性评估方法

在航天器的研制过程中,根据试验验证要求,需要研制各阶段AIT模型并进行大量各类试验。ESA从1999年开始研究航天器AIT模型和试验有效性评估方法,并开发了MATED应用软件,从2006年开始投入其航天器研制的应用,成效非常明显,降低了航天器AIT成本、加快了研制进度,而且确保航天器的在轨可靠性。文章对ESA的航天器AIT模型和试验有效性评估方法及其应用作跟踪研究,并就我国航天器AIT工作提出开展模型和试验有效性研究的建议。     

可变构型复合柔性结构航天器动力学建模研究

针对中心刚体加复合柔性结构类航天器采用混合坐标法和子结构模态综合法，建立了可变构型复合柔性结构航天器低阶动力学模型。获得的柔性动力学方程及其各类耦合系数矩阵，适用于全星级可变构型系统和部件级复合柔性附件系统的控制系统设计与仿真，该模型具有阶数低和工程实用的特点。     

Analysis of the orbital motion of the asteroid Apophis’ satellite

We have analyzed the orbital disturbed spacecraft motion near an asteroid. The equations of the asteroidocentric spacecraft motion have been used with regard to three perturbations from celestial bodies, the asteroid’s nonsphericity, and solar radiation pressure. It has been shown that the orbital parameters of the main spacecraft and a small satellite with a radio beacon can be selected such that the orbits are rather stable for a fairly long period of time, i.e., a few weeks for the main spacecraft with an orbit initial radius of ~0.5 km and a few years before approaching Apophis with the Earth in 2029, for a small satellite at an orbit initial radius of ~1.5 km. The initial orientation of the spacecraft orbital plane perpendicular to the sunward direction is optimal from the point of view of the stability of the spacecraft flight near an asteroid.     

基于知识和大数据的多航天器管理云平台设计

在轨卫星数量呈爆发式增长.在应用方面,亟需提升海量卫星并行管理能力和自动化、智能化水平.设计并构建了一种基于知识和大数据的航天器在轨管理云平台,通过工程实际应用,验证了系统设计的可行性,实现了200余颗在轨航天器的并行管理,可以为我国未来复杂星座星群的高效运行管理提供参考.     

空间碎片减缓策略效果仿真

根据机构间空间碎片协调委员会(IADC)和欧空局(ESA)的空间碎片减缓要求,在建立航天发射、爆炸和碰撞模型,以及碎片演化机制的基础上,对常规发射(BAU)、禁止在轨爆炸(NO-EX)和全面减缓(MIT)三种空间碎片减缓策略条件下,对2000~2100年空间碎片环境进行了仿真计算。结果表明,禁止航天器在轨爆炸、对失效的卫星和火箭上面级实施离轨操作,以及在航天器的发射和运行中不产生或抛弃分离物等减缓措施是限制空间碎片数量增长的有效方法。     

单粒子效应及充放电效应诱发航天器故障的甄别与机理探讨

单粒子效应(SEE)是诱发航天器故障最重要的空间环境因素之一,其与充放电效应(SESD)诱发故障的宏观表象相像,但具体影响细节及防护设计又不尽相同,导致工程上将大量可能由SESD诱发的航天器故障简单归零为SEE并进行改进设计,但复飞后的航天器在轨故障依然不断.截至目前,鲜有综合比对研究以揭示这2种效应诱发星用器件错误和...     

航天微系统技术综述

航天微系统技术包括专用集成电路(ASIC)、片上系统(SoC)、单片微波集成电路(MMIC)、混合集成电路(HIC)等微电子技术和微机电系统(MEMS)。文章介绍了这几种技术的特点、发展现状,以及在航天中的应用情况和应用前景。ASIC与SoC技术可显著提高电子系统的集成度和性能,已在航天中得到广泛应用。MMIC技术可用于航天器通信载荷和平台的射频通信部件,已在欧美航天器中大量应用,目前正朝高频段发展。HIC主要包括厚膜HIC和薄膜HIC,特别适于功率器件和微波器件的集成,目前国外已有大量产品用于航天,如"国际空间站"(ISS)。MEMS技术可用于航天器导航、热控、推进、光学遥感与通信等系统,甚至可对航天器设计方法产生重要影响,但目前还处于起步阶段。在以上技术领域,我国虽已开展了一些研究,但与国外相比还存在较大差距。文章针对航天微系统技术的产业布局、发展方式等提出了建议,可为我国的发展规划和战略决策提供参考。