分布式电推进飞机电力系统研究综述

继飞机二次能源逐步统一为电能形成多电/全电飞机之后,电推进技术成为飞机动力系统电气化的重要发展方向,有望进一步提高飞机动力系统能量转换效率、降低燃油消耗和排放,代表了航空电气化的高级阶段。飞机电力系统及相关技术是支撑电推进技术发展的重要基础。系统总结了电推进飞机的类型与发展现状,论述了飞机混合动力系统及分布式电推进系统的基本概念、特点与意义。阐述了航空电推进系统的基本结构,比较了适用于分布式电推进系统的电力系统架构,系统分析了实现电推进技术所需的高效高功率密度电机、高效大容量功率变换器和综合热管理等关键技术。小型纯电动飞机正在逐步迈向实用化,而分布式混合电推进技术是中大型飞机电气化的重要方向,仍然需要航空机电和动力系统等交叉融合与创新发展。     

Synthesis of an Electrical Power System for a Manned Lunar Base

Current program planning in the area of lunar surface explorationenvisions missions of increasing energy requirements and duration.During the mid 1970's it has been estimated that the electrical powerrequirements for a 3-man mission of one year duration might be in theorder of 33 000 kWh. Load profiles to support regeneration of fuelcell reactants for lunar roving vehicles and base nighttime operationsindicate potential power levels of from 30 to 100 kW. An electricalpower system using a state-of-the-art photovoltaic energy conversionsource was postulated on the assumption that nuclear power systemtechnology would not be flight ready by this time period.The process of synthesizing an overall electrical power system isdiscussed. Included are analyses and system design rationale. A rangefrom 50 to 500 volts dc is considered and the effect on weight andefficiency determined. Additional system criteria such as thermalcontrol, reliability, and emergency operation are discussed. A shred-out oftotal system weight as a function of voltage and regulation is presentedfor a 36 kWload. The impact ofload level, conditioning efficiency,transmission length, and temperature on system weight is discussed. Sensitivityivity curves depicting the effect of variations in these parameters areprovided.It is concluded that an efficiency of 80 percent or greater can beattained by matching the load profile with distribution voltage.     

实现高效率低损伤研磨加工的磨料优化研究

大功率激光系统对于熔石英光学元件提出了苛刻的加工要求,研磨作为加工环节之一,对于光学元件的加工周期和损伤控制具有非常重要的作用。采用计算机控制小磨头方法进行研磨加工时,在加工工艺参数相同的条件下,磨料是直接决定效率和损伤的关键因素。本文分别从材料去除效率和研磨加工损伤两方面对磨料进行对比分析,通过理论仿真得出磨料的规律特性,再结合实验研究进行规律验证,基于高效率和低损伤进行磨料优化选取,并讨论分别给出粗研、精研的磨料和工艺。     

电机-变距螺旋桨动力系统功率优化控制

电动螺旋桨无人机应用越来越普及,但普遍续航时间较短,提高电动力系统效率、降低功率消耗是提高航时的主要措施。电机-变距螺旋桨动力系统（以下简称变距电动力系统）可同时改变转速、桨距两个量,存在桨距和转速的最佳组合,使系统功率最小。相比电机-定距螺旋桨动力系统,其在耗能方面具有特殊优势,但如何达到最小功率点,目前研究较少。针对上述问题,为提高计算效率,便于控制研究工作的开展,首先基于改进天牛须算法的BP神经网络训练得到变距电动力系统的神经网络代理模型。接着提出了一种变距电动力系统功率优化控制策略：在一定入流速度、拉力需求下,基于自适应扩展卡尔曼滤波-牛顿法实时优化桨距,并在一定桨距下利用模糊PID控制系统转速以达目标拉力,实现目标拉力需求下的最小功率控制。仿真验证结果表明,提出的功率优化控制策略鲁棒性更强、优化速度更快、收敛效果更好。     

短纤维增强热塑性树脂复合材料断裂机理研究

测定了两种短碳纤维(CF)增强热塑性树脂复合材料(CF/PPS和CF/PES-C)的抗拉强度(σ_y)、杨氏模量(E)反断裂韧性(K_(IC)等性能随碳纤维体积分数(0～40vol％)的变化。杨氏模量随CF含量增加而线性增加,Krenchel系数为0.05。σ_y和K_(IC)随CF增多而增大,在25vol％处出现峰值。根据裂纹钉扎模型,结合对负载-位移曲线及断口形貌,着重从界面结合力特征进行分析;计算得两种复合材料的等效裂纹张力分別为26kJ/m和2.1kJ/m。     

A new power collection architecture for future spacecraft

The generalized tree-like transmission line network system having n layers in total with m-to-1 branch connection at each joint (T-TLNS-n-m) is proposed to replace the traditional series-parallel combined dc networks to automatically accumulate identically distributed power cells into the large amount of useful power for the spacecrafts. The proposed system has the attractive features of simple structure, easy construction and maintenance, and low cost, because two kinds of parts, ac current sources and m-to-1 transmission line (TL) branch connection parts, are used in the whole system. A method of implementing ac current cells having high output impedance is proposed to improve the power collection efficiency of the whole network system. Simulated results show that that low-pass nominal /spl pi/- or T-circuit with high characteristic impedance, which is used for the voltage source to current source converter in the current cell, improves the efficiency of the voltage inverter, filters out the harmonics, and increases the output impedance of the whole current cell.     

基于Mallat算法的飞机电网谐波检测系统

随着电力电子技术的广泛应用,谐波对飞机电网的污染越来越严重,检测、分析和抑制谐波已经成为重要的课题。小波变换具有时-频局部化特性,在电力系统的分析中具有广阔的应用前景。为实现对飞机电网谐波的快速检测、分析,将小波变换方法应用于飞机电气系统谐波检测中,提出了基于Mallat快速算法的谐波检测系统设计方案。实验结果表明,系统采用小波补偿的改进FFT算法进行谐波分析,可以将信号中不同频率的谐波快速有效地提取出来,并进行有针对性的分析,提高了谐波检测效率。     

基于励磁电流前馈调节的航空直流发电系统建模分析

 高压直流(HVDC)发电系统因为其效率高、质量轻以及可靠性高等诸多优点成为航空供电系统的首选,其系统输出端存在着用于滤波的大电容,这使得采用传统PI调节方案的调压器不能满足系统的动态性能要求。因此,提出了采用励磁电流前馈(ECF)的调压器技术。对该技术进行了详细的理论分析,分别建立了有励磁电流前馈环和无励磁电流前馈环的发电系统的数学模型。比较2个系统的性能,发现有励磁电流前馈环的发电系统截止频率得到了较大的提高。实验表明,在突加负载和突卸负载2种情况下,加入励磁电流前馈环控制,系统能够迅速响应,保持稳定并且超调量小,动态性能得到了明显提高。该方法可推广到不同类型的航空发电系统的调压控制中。     

闭式布雷顿循环发电系统热力过程建模及其参数影响研究

针对闭式布雷顿循环发电系统热力循环过程及其参数影响,开展系统的热力过程参数建模研究,建立系统发电功率、比功率和效率的计算模型;在此基础上,研究闭式布雷顿循环发电系统比功率和效率随涡轮入口总温及效率、压气机入口总温、压气机压比及效率、累积总压恢复系数等的变化规律,考虑参数灵敏度及其优化潜力,提出可用灵敏度并对系统的比功率和效率进行灵敏度分析。研究表明,闭式布雷顿循环发电系统的比功率和效率随涡轮入口总温及效率、压气机压比及效率、系统累积总压恢复系数等参数的增大而增高,随压气机入口总温的增大而减小。在压气机入口总温、压比与效率、涡轮入口总温及效率、累积总压恢复系数等主要热力参数中,系统比功率灵敏度最高的参数为涡轮效率,系统效率灵敏度最高的参数为压气机压比。考虑参数的实际优化潜力,在循环工质一定的条件下,系统比功率可用灵敏度最高的参数为涡轮入口总温,系统效率可用灵敏度最高的参数为压气机压比。     

Development of a High-Efficiency Cascaded Thermoelectric Module

This paper describes progress toward the development of a cascaded thermoelectric module capable of an efficiency of 10 percent. The integration of the module with an isotope heat source to provide a long-life high-efficiency space power system is discussed. The basic concept chosen to meet the efficiency objective consists of SiGe elements metallurgically bonded to an interstage plate which in turn serves as the hot plate for a PbTe stage. The PbTe stage uses segmented elements contained in a gas-filled hermetically sealed enclosure. The fabrication techniques developed to minimize extraneous temperature drops between the two stages and attain a mechanically stable module are described. The design leads to an efficiency in excess of 10 percent with the module operated between 1840 and 400°F. Performance testing of a 20-watt module is discussed and the results compared to the design values.     

一种利用富氮气体增压的涡轮增压惰化系统

为了提高惰化系统对引气的利用效率,提出利用富氮气体(Nitrogen Enriched Air,NEA)增压的涡轮增压惰化系统。系统利用 NEA的高压对动力涡轮进行膨胀做功,并利用轴功带动压缩机对进入空气分离器前的气体进行增压,以提高空气分离效果。相比于宽体飞机普遍采用的引气增压惰化系统,该系统可节约 23.1%~41.2%引气消耗量。进一步,基于国内某型空气分离器的性能,探讨了宽体飞机在巡航高度引气压力较低的现状下,利用 NEA涡轮增压系统实现双流量模式的具体设计过程。研究表明,利用涡轮增压技术提高 NEA纯度,能使 NEA的氧体积分数满足小流量、中流量和大流量阶段的特定要求,利用 NEA增压的涡轮增压惰化系统可以提高引气的利用效率,显著 降低 NEA的氧体积分数,提升惰化系统性能。     

感应电能传输系统损耗分析

感应电能传输(CIPT)技术,是一种新型的电能传输方式,能实现无电气连接的电能传送.松耦合变压器的引入,使得耦合系数较常规变压器低,对系统损耗准确建模成为CIPT技术的关键问题.本文通过对CIPT各个元器件的功率损耗分析,研究各个功率模块损耗之间的耦合关系.以损耗关于原边线圈电流的泰勒展开式为基础,建立CIPT系统功率损耗模型及效率模型.为验证理论分析的正确性,设计制作了一个CIPT样机,通过对不同工况进行比较实验,证明了所建磁路模型、效率模型的正确性.提出的损耗分析方法能够用来指导CIPT系统的分析与设计.     

Solar power system options for the Radiation and TechnologyDemonstration spacecraft

The Radiation and Technology Demonstration (RTD) Mission has the primary objective of demonstrating high-power (10 kilowatts) electric thruster technologies in Earth orbit. This paper discusses the conceptual design of the RTD spacecraft photovoltaic (PV) power system and mission performance analyses. These power system studies assessed multiple options for PV arrays, battery technologies and bus voltage levels. To quantify performance attributes of these power system options, a dedicated Fortran code was developed to predict power system performance and estimate system mass. The low-thrust mission trajectory was analyzed and important Earth orbital environments were modeled. Baseline power system design options are recommended on the basis of performance, mass and risk/complexity. Important findings from parametric studies are discussed and the resulting impacts to the spacecraft design and cost     

FEL system for energy transmission

The use of a free electron laser (FEL) as the power source for transmission from Earth stations to space assets is discussed. Considerations of requirements including net power transmitted, system reliability, system availability, cost, and technical maturity are addressed to determine a reasonable development path to an optimal system. Various applications of transmitted power are examined such as supplementary power to communications satellites, orbit raising through the use of electric and thermal thrusters, supplementary power to manned orbiters and space stations. It is seen that each of these applications leads to different stages of infrastructure development, and that a program following a near optimal development path can lead to a system that has justifiable investments for the services delivered at each stage past the initial technology demonstration     

航空用燃料电池及混合电推进系统发展综述

随着世界范围内碳减排需求的日益增长及长航时飞机的发展需要,高效率的燃料电池航空电推进系统逐渐受到重视,氢能航空的理念被人们所熟知。可使用碳氢燃料的高温燃料电池还可与燃气涡轮组成混合动力系统,发电效率进一步提高至70%。本文首先回顾了燃料电池及燃料电池涡轮混合系统在航空能源、动力系统方向应用概况;接着,概述了几种突破现有涡轮发动机技术瓶颈的新概念混合电推进系统,如发电与推进一体化燃料电池涡轮混合动力系统和无涡轮燃料电池混合推进系统;基于此,本文分析了限制燃料电池混合系统实际应用的关键技术难题,主要体现在混合动力系统功重比较低、大分子碳氢燃料重整技术未突破两方面。     

Computer-Aided Design and Weight Estimation of High-Power High-Voltage Power Conditioners

Aspects of high-power high-voltage power conditioner design and weight estimation relevant to space subsystems are discussed. Weight has become an increasingly important parameter with the advent of larger and more sophisticated spacecraft, especially those for high-power communication. A computer program for estimating the weight of a high-power dc-to-dc power conditioner as functions of output power, operating frequency, input voltage range, maximum input voltage, and efficiency, respectively, is described, including computer-aided design of inductors and transformers. Curves of typical power conditioner weight as functions of the preceding parameters, derived from the power conditioner weight program, are presented.     

大气等离子加工系统设计及实验验证

建立了面向复杂光学表面的大气等离子抛光系统,并用该系统进行硅片表面加工的实验研究.研究了CF_4、SF_6两种气体的放电特性以及加工效果,得到了加工速率与功率,流量间的关系,并通过原子力显微镜观察了加工后的表面质量.     

并联混合动力齿轮传动涡扇发动机建模与性能分析

为对比探究未来大推力航空混合动力系统与传统航空发动机的优劣,本文依托某概念型齿轮传动涡扇(Geared turbofan,GTF)发动机,设计了一个并联航空油-电混合动力系统(hybrid GTF,hGTF),在Matlab /Simulink数字仿真软件中建立相匹配的电动力模型以及氮氧化物NOx排放和噪声预测等性能参数计算模型,并在稳态和飞行任务剖面下初步分析了电动力系统的引入对原基线GTF发动机的性能改变状况。稳态仿真结果表明,大推力等级的并联油-电混合动力系统中,至少需要兆瓦级的电动力系统进行匹配;当电动力系统处于电动模式时,可能会带来低压压气机喘振的隐患;当电动力系统处于再生模式时,电能源相当于经过了电能到机械能再到电能的二次效率损失,不建议采用。飞行任务剖面动态仿真结果表明,相比于传统GTF发动机,hGTF推进系统的燃油消耗率最高下降15%,总燃油消耗节省8.3%, NOx总排放量减少18.8%,各部件起飞噪声总声压级减少1.5~3.3dB。分析结果表明采用并联混合动力系统具有显著提升省油、减排效果的能力,同时也具有一定的降噪潜力。     

A modular 550 watt, 25 watts per cubic inch power supply for nextgeneration aircraft

The development of the HVS-550 high-performance power supply is described. The HVS-550 was designed and built utilizing state-of-the-art surface mount construction, low-profile magnetics, and aggressive thermal management techniques. This combination allowed the module height to be only 0.58 in. The unique requirements of the military system that bounded the power-supply parameters are discussed. Cooling is provided either by liquid circulating through the chassis or by conduction through the card edges. The measured power supply efficiency is in excess of 85%, with 11-V output. The output noise spectrum is excellent because of noise-cancelling techniques utilized to achieve the level of performance required by the system     

Impact Potential of New Power Electronic Technologies

New technological advances in the area of power electronics are having an increasing impact on the design of aerospace control systems. These next generation power components promise improved system performance through increased electronic efficiencies. Applying state-of-the-art packaging concepts as an integral part of the system design will allow these devices to be utilized in a space efficient and reliable manner. The first portion of this paper looks at two such next generation components. The first is a High Voltage Integrated Circuit (HVIC) that provides a bridge between the low voltage controller logic and the high voltage motor winding invertor. This device achieves size reduction and an increase in reliability through integration of low and high voltage logic networks on a single integrated circuit. The second is the Insulated Gate Transistor (IGT). This device provides a high voltage switch with MOS-like drive characteristics. The present and future expectations of these power devices are discussed. This paper then looks at new packaging techniques for power devices. The impact of parasitic circuit effects have significant impact on power circuit performance. Finally, this paper looks at an example control application. The design is that of a permanent magnet motor driven actuator. The drive motor uses 270 vdc for supply voltage. Within the intelligent system controller, is the capability to control the current demands of the motor. The new power electronics devices are making the design feasible in both thermal and volume efficiency. This topic includes projected controller sizing into the 1990s.