Multibaseline ATI-SAR for robust ocean surface velocity estimation

An open problem of along-track interferometry (ATI) for synthetic aperture radar (SAR) sensing of ocean surface currents is the need of ancillary wind information for inversion of Doppler centroid measurements, that have to be compensated for the propagation velocity of advancing and/or receding Bragg scatterers. We propose three classes of estimators which exploit multibaseline (MB) ATI acquisition and Doppler resolution for robust data inversion under different degrees of a priori information about the wind direction and the value of the characteristic Bragg frequency. Performance analysis and comparison with conventional ATI show that the proposed MB estimators can produce accurate velocity estimates in the absence of detailed ancillary data.     

一种提高距离分辨率的FMCW SAR RD成像算法

调频连续波合成孔径雷达（FMCW SAR）是一种新近提出来的成像雷达体制,它结合调频连续波与合成孔径成像技术,具有体积小、重量轻、成本低、分辨率高等一系列优点。从频谱的角度进行分析,FMCW SAR的距离分辨率取决于频率测量分辨率。文章研究了一种FMCW SAR高距离分辨率成像算法——利用FFT得到差频信号谱峰的粗略范围,再对这一范围进行ChirpZ变换,从而实现距离高精度估计,并且避免了大的计算量。仿真结果表明该方法的有效性。     

Integrated precision SAR targeting: a SAR targeting simulation

Operational deficiencies exist in the current ability to perform high resolution synthetic aperture radar (SAR) targeting for precision strike missions in difficult electronic countermeasure (ECM) and anti-aircraft environments. Increasingly sophisticated enemy defenses require that fire control information be derived from highly maneuverable aircraft trajectories rather than traditional straight-and-level flight. In addition, target area aspect information is needed to determine optimal attack approaches. These imaging and targeting conditions impose severe performance requirements on the sensor aircraft motion compensation system (MCS), and dictate the need for sophisticated algorithms to counteract ECM threats. This paper describes the development of a user friendly “Design Tool” for modeling and analysis of airborne radar system performance for SAR imaging and Precision SAR Targeting     

Propagation velocity uncertainty on GPR SAR processing

To detect buried landmines, Planning Systems Incorporated (PSI) has developed a ground-penetrating synthetic aperture radar (GPSAR) system. Since the electromagnetic wave propagation velocity in the soil depends on many factors, velocity uncertainty is inevitable. However, we have observed that, unlike conventional airborne/spaceborne synthetic aperture radar (SAR) systems, the PSI GPSAR system is very robust against the velocity uncertainty under mild conditions. Theoretical analysis is provided to explain this observation. Although our discussion is based on the PSI GPSAR system, it applies to other GPR-based (ground-penetrating radar) landmine detection systems as well.     

机动目标的逆合成孔径雷达成像

 逆合成孔径雷达(ISAR)和合成孔径雷达 (SAR)都是利用目标 (场景)与雷达的相对运动,提高横向分辨率,实现对目标 (场景 )的成像。SAR的运动方是雷达平台,可控制作平稳飞行,且用仪器测校其偏离误差;ISAR的运动方通常是非合作目标,运动不受控制,且难以精确测量。当目标作机动飞行时,以目标作固定基准,雷达等效地在空间形成流形复杂的逆合成孔径 (阵列 ),对这种情况下成像的问题进行了系统的研究。     

Synthetic Aperture Radar System Design for Random Field Classification

The optimum design of synthetic aperture radar (SAR) systems intended to classify randomly reflecting areas, such as agricultural fields, characterized by a reflectivity density spectral density is studied. Assuming areas of known shape and location, the binary case, and a certain Gaussian signal field property, and ignoring interfield interference, the problem solution is given. The optimum processor includes conventional matched filter processing, but is nonlinear; a coherent optical system realization is outlined. The performance is approximated using a x2 assumption and bounded by the Cernov bound. A fundamental design problem involves the system bandwidth analogously, in a special case, as in diversity communication systems; a solution is given based on the Cernov bound. A set of summary design curves is given and exemplified by a satellite SAR system design. Also discussed is the measurement of reflectivity spectral density amplitude with imaging sidelooking (synthetic or ?brute-force?) radars and the maximum likelihood estimator's accuracy and realization with a coherent optical system. It is also shown that a CW modulation is useable if the random reflectivity is, effectively, isotropic. Finally, the reflectivity density spectral density amplitude, when constant over the spatial bandpass of the measuring system, is related to the scattering cross-section density commonly measured.     

一种改进的FMCW SAR RD成像算法

FMCWSAR将调频连续波与合成孔径成像技术结合于一体,是一种新近被提出来的成像雷达体制,它以其体积小、重量轻、成本低、分辨率高等一系列优点,引起越来越多的关注。然而,在FMCWSAR系统中,雷达连续不断地发射信号,调制信号周期相对较长,停一走（STOP AND GO）近似不再成立,所以要用合适的算法来实现成像。针对FMCW SAR的特点,详细推导了停一走近似失效时FMCW SAR的信号模型及处理过程,提出了一种改进的RD算法。此方法是通过补偿连续运动引入的多普勒频移,消除连续运动的影响。     

一种稳健的利用分布式小卫星获取宽域、高分辨SAR图像的方法

 传统星载合成孔径雷达(SAR)受最小天线面积条件的限制,其横向分辨率与测绘带宽度相矛盾,采用编队飞行的分布式小卫星SAR体制,可解决这一矛盾,即能够同时获得大测绘带、高分辨率的地面场景的SAR图像。主要研究如何在误差环境下抑制由小天线引入的多普勒模糊的信号处理方法。该方法利用子空间投影技术对导向矢量进行精确估计,在小卫星存在基线及其他误差时仍然能够稳健地恢复高分辨的二维SAR图像。     

Improving slant-range resolution with multiple SAR surveys

Across-track resolution of a spaceborne synthetic aperture radar (SAR) system is limited by power and data rate constraints. The authors derive and discuss a new technique for increasing the across-track resolution of objects that do not change with time, using multiple surveys of the same area from different off-nadir angles. Precise information on the spaceborne trajectories are not requested since they can be derived from SAR interferometry. Simulated data show that theoretical derivations are in good agreement with practice     

一种孔径和频率二维稀疏的步进频SAR成像方法

 步进频率信号(SFWs)在不增加雷达系统瞬时带宽的情况下能够获得高的距离向分辨率的同时,也存在着抗干扰能力较差及其等效重复频率较低的问题,并且在方位向积累时间内由于雷达载机工作状态的变化,会导致方位向的数据录取不完整。针对上述问题,提出一种孔径和频率二维稀疏的步进频合成孔径雷达(SAR)成像方法。首先,分析了稀疏步进频率信号(SSFWs)的SAR成像模型,然后基于压缩感知理论完成距离向成像处理。其次,针对稀疏孔径的回波数据,通过构造成像算子和压缩感知重建模型的方法实现其距离徙动校正和方位压缩处理,进而获得二维成像结果。相比于传统的步进频率信号SAR成像,利用所提方法能够在少量的频率资源和雷达回波数据情况下实现准确的SAR成像。最后,通过对仿真和实测的步进频率雷达数据进行成像处理,验证了所提方法的有效性和可行性。     

基于SVD的R-T-S最优平滑在机载SAR运动补偿POS系统中的应用

 机载合成孔径雷达（SAR）运动补偿用位置姿态系统（POS）的导航精度直接影响SAR成像的效果。为进一步提高POS的导航精度和数值稳定性,提出将基于奇异值分解（SVD）的Rauch-Tung-Striebel（R-T-S）最优固定区间平滑应用于POS后处理中。在基于SVD的前向卡尔曼滤波（KF）的基础上,进行了基于SVD的后向R-T-S最优固定区间平滑,获得位置、速度和姿态的最优估计。该方法将原算法中均方误差阵进行奇异值分解,不仅具有很好的数值稳定性和鲁棒性,而且避免了矩阵的求逆。半物理仿真结果表明,该方法在导航精度和数据平滑度上明显优于目前工程中应用的KF,是一种有效的事后处理方法。     

弹载合成孔径雷达自适应重频分析与设计

弹载合成孔径雷达(Synthetic Aperture Radar,SAR)的目标距离、视线角由于高速逼近目标而快速变化,这导致传统的固定脉冲重复频率(Pulse Repetition Frequency,PRF)(简称重频)波形难以兼顾弹载SAR雷达在成像各方面的约束条件,故需要根据当前弹体运动和弹目关系变化情况实时计算重频。详细分析了影响重频选择的各项因素,包括避免距离模糊、方位模糊、高度杂波、发射遮挡影响及SAR成像分辨率、系统相参性要求等影响因素,并设计了自适应重频计算的工作流程。某SAR雷达系统实验表明,该设计能够在实际飞行弹道条件下根据实际弹目关系自适应调整脉冲重复频率,从而更好地实现SAR雷达系统的工作性能,有效解决了固定重频波形不能适应弹载SAR工作条件的难题。     

Feature enhancement and ATR performance using nonquadratic optimization-based SAR imaging

We present an evaluation of the impact of a recently proposed synthetic aperture radar (SAR) imaging technique on feature enhancement and automatic target recognition (ATR) performance. This image formation technique is based on nonquadratic optimization, and the images it produces appear to exhibit enhanced features. We quantify such feature enhancement through a number of criteria. The findings of our analysis indicate that the new feature-enhanced SAR image formation method provides images with higher resolution of scatterers, and better separability of different regions as compared with conventional SAR images. We also provide an ATR-based evaluation. We run recognition experiments using conventional and feature-enhanced SAR images of military targets, with three different classifiers. The first classifier is template based. The second classifier makes a decision through a likelihood test, based on Gaussian models for reflectivities. The third classifier is based on extracted locations of the dominant target scatterers. The experimental results demonstrate that the new feature-enhanced SAR imaging method can improve the recognition performance, especially in scenarios involving reduced data quality or quantity.     

合成孔径雷达系统建模、仿真与信号处理初探

作为雷达技术发展历史中的里程碑,合成孔径雷达(SAR)通过使用空中合成天线阵列技术及先进的目标回波信号处理技术能够提供清晰的地球表面图像。由于它的这一突出特点,SAR已经成为许多飞行器的重要任务载荷并被广泛应用于军事及民用领域。从航空电子系统总体需求角度出发,为了深刻理解SAR系统的工作原理并得到更好的SAR图像产品,有必要对系统数学模型的建立、SAR回波信号的仿真以及信号处理算法进行深入的研究。本文试图从这三方面讨论SAR系统设计中的关键问题。     

Resolution and synthetic aperture characterization of sparse radar arrays

The concept of radar satellite constellations, or clusters, for synthetic aperture radar (SAR), moving target indicator (MTI), and other radar modes has been proposed and is currently under research. These constellations form an array that is sparsely populated and irregularly spaced; therefore, traditional matched filtering is inadequate for dealing with the constellation's radiation pattern. To aid in the design, analysis, and signal processing of radar satellite constellations and sparse arrays in general, the characterization of the resolution and ambiguity functions of such systems is investigated. We project the radar's received phase history versus five sensor parameters: time, frequency, and three-dimensional position, into a phase history in terms of two eigensensors that can be interpreted as the dimensions of a two-dimensional synthetic aperture. Then, the synthetic aperture expression is used to derive resolution and the ambiguity function. Simulations are presented to verify the theory.     

Automatic target recognition using enhanced resolution SAR data

Using advanced technology, a new automatic target recognition (ATR) system has been developed that provides significantly improved target recognition performance compared with ATR systems that use conventional synthetic aperture radar (SAR) image-processing techniques. This significant improvement in target recognition performance is achieved by using a new superresolution image-processing technique that enhances SAR image resolution (and image quality) prior to performing target recognition. A computationally efficient two-level implementation of a template-based classifier is used to perform target recognition. The improvement in target recognition performance achieved using superresolution image processing in this new ATR system is quantified     

基于数值计算的机载SAR空变运动补偿算法

针对机载合成孔径雷达(SAR)高分辨率宽测绘带(HRWS)成像问题,在分析结合两步运动误差补偿的距离徙动算法基础上,提出一种基于数值计算的空变运动误差补偿算法。通过对粗聚焦图像进行分块,在子块的两维波数域进行空变运动补偿,补偿的相位包括方位相位误差、距离相位误差以及方位和距离的耦合相位,因此该算法在复杂航迹、高分辨和宽测绘带情况下仍具有较好的鲁棒性。最后对SAR仿真数据和实测数据进行处理,并与结合两步运动误差补偿的距离徙动算法进行比较,处理结果表明该算法能够更好地补偿空变运动误差。     

高信噪比、高分辨宽测绘带成像

针对传统高分辨和宽测绘带以及高信噪比和宽测绘带之间的矛盾,提出一种基于脉内扫描面阵合成孔径雷达(SAR)系统的二维空域联合处理算法实现高信噪比、高分辨宽测绘带成像。文中首先建立脉内扫描面阵SAR系统模型,该系统采用低脉冲重复频率(PRF)获得宽测绘带信息,同时利用脉内扫描方式获得高信噪比的回波信号。对于低PRF采样宽多普勒谱(对应方位高分辨)引起的多普勒模糊以及脉内扫描引起的距离模糊,提出一种二维空域联合处理算法解距离和多普勒模糊,并且详细地分析了地形高度变化对解模糊算法的影响。最后,通过仿真实验验证了本文算法的有效性。     

A Model for Generating Synthetic VHF SAR Forest Clutter Images

We propose a model for generating low-frequency synthetic aperture radar (SAR) clutter that relates model parameters to physical characteristics of the scene. The model includes both distributed scattering and large-amplitude discrete clutter responses. The model also incorporates the SAR imaging process, which introduces correlation among image pixels. The model may be used to generate synthetic clutter for a range of environmental operating conditions for use in target detection performance evaluation of the radar and automatic target detection/recognition algorithms. We derive a statistical representation of the proposed clutter model's pixel amplitudes and compare with measured data from the CARABAS-II SAR. Simulated clutter images capture the structure and amplitude responses seen in the measured data. A statistical analysis shows an order of magnitude improvement in model fit error compared with standard maximum-likelihood (ML) density fitting methods.     

Super resolution SAR imaging via parametric spectral estimationmethods

Super resolution synthetic aperture radar (SAR) image formation via sophisticated parametric spectral estimation algorithms is considered. Parametric spectral estimation methods are devised based on parametric data models and are used to estimate the model parameters. Since SAR images rather than model parameters are often used in SAR applications, we use the parameter estimates obtained with the parametric methods to simulate data matrices of large dimensions and then use the fast Fourier transform (FFT) methods on them to generate SAR images with super resolution. Experimental examples using the MSTAR and Environmental Research Institute of Michigan (ERIM) data illustrate that robust spectral estimation algorithms can generate SAR images of higher resolution than the conventional FFT methods and enhance the dominant target features