High resolution radar clutter statistics

The generalized compound probability density function (GC-pdf) is presented for modeling high resolution radar clutter. In particular, the model is used to describe deviation of the speckle component from the Rayleigh to Weibull or other pdfs with longer tails. The GC-pdf is formed using the generalized gamma (GΓ) pdf to describe both the speckle and the modulation component of the radar clutter. The proposed model is analyzed and thermal noise is incorporated into it. The validation of the GC-pdf with real data is carried out employing the statistical moments as well as goodness-of-fit tests. A large variety of experimental data is used for this purpose. The GC-pdf outperforms the K-pdf in modeling high resolution radar clutter and reveals its structural characteristics     

Effectiveness of MMW aerosols in defeating a battlefieldsurveillance radar: field demonstration preliminary results

The US Army ERDEC is developing advanced aerosol systems to combat threat surveillance, fire control, and seeker systems operating in the visible, infrared, and millimeter wave portions of the electromagnetic spectrum. One such system is the M56 multispectral smoke generator, which presently operates in the visible and infrared portions of the spectrum; a millimeter wave (MMW) Module is in development to extend the M56 spectral range. This paper documents preliminary results of a field demonstration test of the M56 MMW Module. An MMW instrumentation radar was modified to simulate the scan pattern and radar parameters of a tactical battlefield surveillance radar system. A test grid was populated with both stationary and moving tactical targets, and the radar scanned the grid to simulate a surveillance radar in operation. Once a realistic tactical engagement scenario was developed, MMW aerosols were deployed to demonstrate the impact such aerosols could have on radar detection and classification performance     

Hardware-in-the-loop simulation technology of wide-band radar targets based on scattering center model

Hardware-in-the-loop(HWIL) simulation technology can verify and evaluate the radar by simulating the radio frequency environment in an anechoic chamber. The HWIL simulation technology of wide-band radar targets can accurately generate wide-band radar target echo which stands for the radar target scattering characteristics and pulse modulation of radar transmitting signal. This paper analyzes the wide-band radar target scattering properties first. Since the responses of target are composed of many separate scattering centers, the target scattering characteristic is restructured by scattering centers model. Based on the scattering centers model of wide-band radar target, the wide-band radar target echo modeling and the simulation method are discussed. The wide-band radar target echo is reconstructed in real-time by convoluting the transmitting signal to the target scattering parameters. Using the digital radio frequency memory(DRFM) system,the HWIL simulation of wide-band radar target echo with high accuracy can be actualized. A typical wide-band radar target simulation is taken to demonstrate the preferable simulation effect of the reconstruction method of wide-band radar target echo. Finally, the radar target time-domain echo and high-resolution range profile(HRRP) are given. The results show that the HWIL simulation gives a high-resolution range distribution of wide-band radar target scattering centers.     

Search radar detection and track with the Hough transform. II.detection statistics

For pt.I see ibid., vol.30, no.1, (Jan.1994). This paper describes the calculation of P_F and P_D for the Hough transform technique when the primary threshold crossings are weighted by their power before transforming (i.e., noncoherent integration). After expressions for P_F and P_D are derived, we examine the question of optimal granularity of the Hough accumulator space. We also investigate the relationship between primary and secondary thresholds and its effect on detectability     

Multi-aspect radar target recognition method based on scattering centers and HMMs classifiers

A hidden Markov model (HMM)-based method for recognizing aerial targets according to the sequential high-range-resolution (HRR) radar signature is presented. Its recognition features are the location information of scattering centers extracted from the HRR radar echoes by the relax algorithm. The HMM is used to characterize the spatio-temporal information of a target. Several HMMs are cascaded in a chain to model the variation in the target orientation and used as classifiers. Computer simulations with the inverse synthetic aperture radar (ISAR) data are given to demonstrate that for an open-set recognition, average class-recognition rates of 84.50% and 89.88% are achieved, respectively, under two given conditions.     

A new look at nonseparable synthetic aperture radar processing

The author examines the nonseparable, template correlation approach to digital-strip-mode synthetic-aperture radar (SAR) phase history processing and concludes that it can now outperform the traditional separable approaches in the areas of speed, image quality, control simplicity, and flexibility. A working nonseparable frequency-domain SAR processor is described and evaluated. The image quality is seen to be superior to that resulting from the separable approaches. Based on the working intermediate hardware implementation, the author strongly suggests that future VHSIC and other advanced implementation will provide extremely fast (real time), high-quality, small, flexible SAR processors     

Invention of ground control approach radar at the MIT RadiationLaboratories

The use of the XT-1 radar by Dr. Luis Alvarez in 1941, at the newly formed MIT Radiation Laboratory, to provide aircraft approach guidance, and the subsequent development of a new radar concept for ground control approach, are described. Their use during World War II and subsequent adoption for civil aviation are discussed     

毫米波制导导弹系统误差及捕获概率研究

分析了毫米波制导导弹系统误差源及其分布特性,该误差直接决定所需导引头动态视场的大小;对导引头动态视场的影响因素进行了分析,并计算了导引头在不同条件下的动态视场,基于此计算了导引头捕获概率。研究结果可以直接应用于毫米波制导导弹的工程研制,并且可以对同类的自寻的导弹工程研制起借鉴作用。     

Scan conversion of radar images

The object of scan conversion is to resample a polar-sampled image into a Cartesian format while retaining integrity of the geometry and content of the image. Linear interpolation and decimation in two dimensions in the context of scan conversion are reviewed. Appropriate approximations of the nonlinear relationship between Cartesian and polar coordinates are then made to allow the application of the linear interpolation theory to produce a number of practical scan conversion algorithms. Together with an image prefiltering process, which is applied to areas which require scan conversion decimation, an effective scheme is presented     

温州地区不同时距下近地台风特性观测研究

基于2008年影响温州地区的台风海鸥、凤凰和蔷薇的实测风场资料,分析了不同平均时距下近地台风的湍流特性(如平均风速、风向、湍流度和阵风因子)。实测结果表明:同一地点不同台风的平均风向角可能相差很大,不同时距最大平均风速不是同步出现;随着平均风速的增大,湍流度和阵风因子有逐渐减小的趋势;当地湍流度实测结果明显大于已有平坦市郊区地形的实测值和日本风荷载规范经验公式计算值;不同平均时距的横风向与顺风向阵风因子的比值变化较大;1m in或3 s平均时距值可较好地反映出台风风速、风向、湍流度和阵风因子的脉动性和变化规律。     

Performances of order statistics CFAR

A previous analysis of order-statistics constant-false-alarm-rate (OS-CFAR) radar receiving a single pulse from a Rayleigh fluctuating target in a Rayleigh background is extended to a Rayleigh-plus-dominant target. The analysis includes effects of a multitarget environment. A detailed comparison of OS-CFAR, cell-averaging (CA) CFAR, and censored CA-CFAR is provided for a Rayleigh target in the presence of strongly interfering targets. The false-alarm analysis of OS-CFAR is extended to the more general case of a Weibull background. The deterioration of the CFAR property of OS as the shape factor, C, of a Weibull probability density function changes from Rayleigh (C=2) to a longer-tailed one (C<2) is evaluated. The analytic comparison between CA-CFAR and OS-CFAR is extended to an integration of pulses reflected from a Swerling II target. The OS-CFAR performance (with and without interfering targets) yields an integral equation that is solved numerically     

The early history of pulse compression radar-the development ofAN/FPS-17 coded-pulse radar at Lincoln Laboratory

The development of pulse compression radar at MIT Lincoln Laboratory is related on the basis of the author's personal recollections. He describes the formation of the Radar Techniques Group, the development of the concept, the first system constructed, and the selection of an appropriate code for the transmitted waveform     

XNA中的一种无限大地形生成方法

三维真实感地形是虚拟场景中的基础部分,其绘制的速度与质量是构建三维虚拟场景成败的关键。利用Visual Studio 2008和c#语言,以XNA为工具,用中点偏移算法（Midpoint Displace-ment）生成的值与高程数据之间建立相应的映射关系,建立标准的地形高程数据组快速生成了三维网格地形。在渲染过程中利用本方法可以模拟随海拔高度而各异的生态现象。实践证明,用该方法能在普通的PC机上生成有真实感的无限大地形,并能方便的应用到虚拟现实系统中。     

The design of digital radar receivers

With the development of digital processing technology, there are emerging trends toward digitization in radar receivers design. By applying direct intermediate frequency-to-digital conversion (IF sampling) and direct digital synthesis (DDS), digital radar receivers can be designed. The digital radar receivers can obtain much higher precision and stability than analog ones; moreover, it can retain the extreme flexibility of digital techniques. This paper presents the principle, constitution and design method of digital radar receivers     

CESM-a new category of radar ECCM

Radar ECCM techniques are well known. Heretofore the listed ECCM effects have generally been to counteract the effects of ECM. This approach is one of attempting to cure an illness, rather than preventing it. Modem ECM systems usually include an ESM receiver to detect the radar signal, identify it by its emission characteristics, assess its importance, select the proper ECM, and signal to initiate ECM. If the ESM receiver detection of the radar signal can be delayed/denied, or the identification be confused, either the wrong ECM may be applied, or delayed. The radar may thus not be confronted with timely, proper ECM. Radar operation may therefore be possible. This paper introduces and defines CESM, a new category of radar ECCM. There are two principles of CESM-those which delay/deny ESM receiver detection, and those which confuse/impede signal identification. Illustrative examples of CESM techniques/operating techniques are given. It is shown that many CESM techniques may have multiple roles by impeding detection, impeding identification, and also diluting effects of ECM     

Bispectral analysis of atmospheric radar signals

The bispectral analysis techniques have been applied on signals received from the back-scattered signals by the MST radar. The results of this analysis are compared with that of the conventional power spectral analysis using the Fast Fourier Transform (FFT) technique. Our results showed that there is a significant advantage in using the bispectral technique over the conventional FFT technique. This study focuses on the importance of bispectral analysis in applications to atmospheric signals.     

An overview of impulse radar phenomenon

An overview is presented of some of the interesting issues concerning impulse waveforms on materials. An attempt is made to analyze such phenomena as molecular relaxation, signal precursor effects, self-induced transparency, and the natural resonance theory. Proposed applications for impulse radar are discussed     

Summary of recent Australian radar developments

Over the last 30 years there has been a growing Australian capability in very long-range radar systems, especially over the horizon radar (OTHR) and a related technology, surface wave radar (SWR). Both operate in the high frequency (HF) band between 3 and 30 MegaHertz (MHz), which are wavelengths between 100 and 10 metres, respectively. Based on current evidence, it appears that Australia may have found the tools with which to conduct efficient long-range surface and air surveillance more effectively than by the single use of traditional surveillance forces. Given increasing success and refinement of these technologies, one can see that the SWR systems in particular could, in addition, satisfy a number of potential export requirements and earn useful export credits.