民航地空通信干扰抑制系统的设计与实现

在中国民航空管地空通信经常受到无线电干扰,无法保障正常通信。从根本上解决民航地空通信干扰问题,对于有效保障民航安全具有重要的意义。结合民航VHF通信干扰源的特点,将基于恒模阵列的自适应信号处理技术应用于地空通信干扰抑制中,设计并实现了自适应干扰抑制实时系统,取得了很好的干扰抑制效果。     

双通道恒模干扰抑制VHF接收机设计与实现

为了解决民航地空通信受到无线电干扰的问题,提出了双通道恒模干扰抑制自适应抑制接收机的设计实现方案。接收机中的信号处理平台在FPGA中实现自适应干扰抑制,使用DSP判断恒模算法输入信号是否存在干扰,以及对恒模算法输出信号进行属性判断以防止误捕获。再配以具有VHF信号接收功能的射频前端电路,实现接收、干扰抑制、解调地空通信信号的功能。系统测试表明,双通道恒模干扰抑制接收机能够自适应地抑制恒模干扰。     

基于Kalman滤波的GPS/INS接收机自适应干扰抑制方法

 考虑到惯导信息辅助GPS(GPS/INS)接收机对干扰抑制实时性的要求,提出一种基于Kalman滤波的GPS/INS接收机自适应干扰抑制方法。自适应广义旁瓣相消(GSC)多采用低复杂度最小均方(LMS)算法更新权矢量,收敛速率较低,严重时会导致接收机定位中断。首先利用Householder变换构建GSC下支路的阻塞矩阵,用于阻塞任意二维阵型阵列接收的期望信号;再用Kalman滤波自适应更新下支路权矢量,从而有效提高阵列输出信干噪比(SINR)。理论分析和仿真结果说明本文方法可有效抑制干扰对接收机的影响,且具有实时性高的特点。     

一种基于协方差矩阵加权的阵元误差补偿STAP处理

机载多通道阵列雷达天线在工程实践中不可避免地存在各类阵元误差,所产生的通道失配问题会对空时二维自适应处理的性能造成大的影响。对存在阵元误差时的阵列信号模型进行了分析,提出了一种基于协方差矩阵加权（CMT）的阵元误差补偿空时自适应处理（STAP）方法,在工程应用中该加权矩阵可通过地面天线定标及校飞过程确定,通过对总干扰协方差矩阵估计的加权预处理,可将实际阵元误差对STAP性能的影响控制在测量误差的影响范围,最后通过仿真验证了算法的有效性。     

基于功率特征分组的空时自适应脉冲干扰抑制方法CSCD

脉冲干扰是一种常见的导航干扰类型,具有高带宽、突发性等特点,针对脉冲干扰的抑制具有较大难度。常规空时自适应处理不对接收信号类型进行区分,而是统一进行协方差矩阵估计及权值计算,存在抗脉冲干扰性能下降或失效的可能。针对以上问题,提出了一种基于功率特征分组的空时自适应处理方法。首先对接收数据进行功率检测,将信号采样数据分为有干扰数据组和无干扰数据组,然后对分组后的数据分别进行权值计算和滤波处理,最后将滤波后的数据按照采样顺序进行合并。该方法通过数据分组,提高了干噪比的统计计算准确度,增加了干扰零陷深度,实现了抗干扰能力的提升。理论分析和仿真实验均证明了该方法的有效性。     

基于3DT的空时自适应单脉冲参数估计算法

空时自适应处理(STAP)是机载预警雷达抑制杂波和干扰的一项关键技术,而多普勒三通道联合自适应处理(3DT)是适合工程实现的降维(RD)STAP方法。STAP目标检测后还需进一步估计目标的角度参数,因此将自适应单脉冲(AM)技术引入3DT,提出了一种高精度联合估计目标速度与方位空间角的空时自适应单脉冲算法。理论分析与仿真实验结果表明,当目标多普勒频率偏离检测多普勒单元中心频率时,该算法能同时减少目标多普勒跨越损失和空时导引矢量失配损失,进而提高输出信杂噪比(SCNR),改善目标测角精度。     

一种机载雷达两级降维空时二维自适应处理方法

 提出了一种机载相控阵雷达杂波抑制的两级降维空时自适应处理(STAP)方法,即：先根据杂波分布先验信息进行空时局域化(JDL)降维处理,然后对局域化输出进行多级维纳滤波(MWF),实现二次降维。该方法综合了固定结构和自适应结构降维技术的优点,将JDL处理引入到MWF中,从而有效降低MWF的杂波自由度。计算机仿真和理论分析表明本文方法比JDL自适应处理方法和全空时MWF方法具有更小的运算量,对阵元随机幅相误差具有很好的容差能力,是一种稳健的两级降维自适应处理方法。最后,基于仿真和实测数据的实验验证了算法的有效性。     

基于稀疏贝叶斯学习的字典失配杂波空时谱估计方法

杂波谱稀疏恢复空时自适应处理（STAP）是一种有效减少杂波样本数需求的机载雷达杂波抑制方法。然而,空时平面被离散地划分为若干个网格点来构建空时导向矢量字典,当字典在失配时,杂波脊不能准确落在预先离散化的网格点上,稀疏恢复STAP性能严重下降。提出了一种基于稀疏贝叶斯学习的字典失配杂波空时谱估计方法,首先利用二维泰勒级数建立空时动态字典模型,然后将字典失配误差作为待估超参数构建贝叶斯稀疏恢复模型,并利用失配误差估计值对空时导向矢量字典进行修正,最后利用修正后的空时导向矢量字典重构杂波协方差矩阵,进而计算杂波空时谱。实验证明,该方法能够有效提高字典失配情况下的杂波谱稀疏恢复精度,杂波抑制性能优于已有字典预先离散化的稀疏贝叶斯学习STAP方法。     

基于射影算子的变循环发动机鲁棒自适应控制器设计

针对变循环航空发动机大范围工作包线下的复杂外部扰动现象引起的多变量鲁棒自适应控制器设计问题,给出基于射影算子的自适应律设计方法并将其应用至模型参考自适应控制器设计中。通过理论分析与变循环航空发动机某一状态点的仿真分析,阐明系统存在外部干扰时传统自适应律的设计方法对于指令跟踪不足等问题,进而在射影算子的理论框架基础上设计自适应律,将存在干扰时的状态误差动态方程的解限制在设定的凸集范围内,从而实现系统状态误差动态方程不大于零的稳定性要求,最终在LQR基准控制器框架上,实现基于射影算子的多变量鲁棒自适应控制器设计,以改善自适应控制系统的鲁棒性。基于该方法对变循环航空发动机进行控制器设计和仿真。结果表明:基于射影算子的自适应律设计方法改善了传统自适应律设计方法的鲁棒性问题,实现了控制系统对外部干扰的有效抑制,当系统各控制回路加入不同外部随机噪声信号时,均达到了期望的控制效果;变循环航空发动机各个状态点均能够跟踪期望的闭环参考指令,各状态点稳态控制误差均小于0.5%,系统超调量小于1%,调节时间小于1.2s,动态跟踪误差不大于0.5%,符合发动机控制系统技术要求。     

两种自适应方向图峰值副瓣控制方法比较

自适应阵列（或称自适应波束形成）目前已广泛应用到雷达、声纳和通信领域中用来抑制各种干扰（有意的干扰，杂波干扰和多用户干扰等）。在雷达应用中，为了减轻脉冲欺骗式干扰或旁瓣目标并利用单脉冲雷达来准确测量目标波达方向．要求自适应方向图具有低副瓣和稳定的主瓣形状。在实际应用中，各种失配误差将降低自适应阵列的性能．这些误差包括由于目标的波达方向不精确引起的信号指向误差，由通道失配和位置扰动引起的阵列校准误差和由小样本教引起的协方差矩阵估计误差。在此情况下，自适应波束形成的性能大大下降（干扰抑制性能变差。主瓣失真和高的副瓣）。已提出了一种基于二次约束的集成峰值副瓣控制（integrated peak sidelobe control，简称IPSC）方法。该方法可以精确地控制峰值副瓣电平并产生具有稳定的主瓣形状的自适应方向图。研究IPSC中目标信号的影响和信号消除方案以进一步提高IPSC的性能。并将IPSC方法和最新提出的基于二阶锥规划（second-order cone programming，简称SOCP）的分布式峰值副瓣控制（distfibuted peak sidelobe control，简称为DPSC）新方法在性能上进行了比较。仿真结果表明。在干扰抑制性能和方向图控制质量方面IPSC比DPSC性能优越。此外IPSC比DPSC计算高效。     

New approach for suppression of FM jamming in GPS receivers

A new approach is proposed for the suppression of FM jammers in C/A code GPS receivers. This approach is based on the cascading of the augmented-state approximate conditional mean (ASACM) filter and the discrete wavelet transform (DWT) filter. An ASACM filter for single interference suppression in spread-spectrum systems has been reported in the recent literature. However, the formulation of the ASACM filter and its performance analysis is lacking in the case of suppression of multiple FM interferences. The ASACM filter is formulated here for the suppression of multiple FM jammers. Further, a DWT filter using biorthogonal wavelet is suggested for the suppression of FM jammers. Finally, these two filters are cascaded to get an optimum performance for higher jammer to signal ratio, which is of importance in the GPS, for the case of suppression of multiple FM jammers. The performance of the proposed filters is analyzed through simulation examples for the suppression of single and multiple FM jammers in GPS receivers     

Multicomponent receiver architectures for GPS interference suppression

The global positioning system (GPS) is a one-way satellite-based navigation system employing spread-spectrum techniques that is widely used for commercial and military applications. Although the very low signal-to-noise ratio (SNR) is handled by the large spreading gain, GPS is susceptible to high-power interference signals and various types of jammers. We propose multicomponent receiver architectures for GPS interference suppression. A conventional antenna system is first considered which utilizes a minimum-variance distortionless-response (MVDR) beam former and assumes that the GPS signal angle of arrival (AOA) and the antenna model are known at the receiver. However, this receiver is sensitive to AOA estimation errors and can have a high computational complexity. This sensitivity problem is eliminated by a multicomponent system based on a multistage matched filter (MF). Since this MF receiver also has a high computational complexity because the jammer AOAs must be estimated, we introduce a blind interference canceler based on the constant modulus (CM) array that is insensitive to AOA estimation errors and has a low computational complexity. Computer simulations are provided to illustrate the performance of the various systems for interference suppression in example signal scenarios.     

Blind GPS receiver with a modified despreader for interference suppression

The global positioning system (GPS) was designed to provide location estimates for various civilian and military applications using at least four satellites. Since GPS signals have a low signal-to-noise ratio (SNR), they also have a low signal-to-jammer ratio so that the accuracy of location estimates is influenced by cochannel interference and intentional jammers. We propose a low-complexity blind adaptive receiver that is based on a novel modified despreader and the constant modulus (CM) array. This system is capable of ing directional interference and capturing the GPS signal of interest without requiring explicit angle-of-arrival (AOA) information. We also consider the multiple satellite problem and extend the proposed receiver to capture several GPS signals of interest. Representative computer simulation examples are presented to illustrate the performance of the multicomponent system for the suppression of different jammer types.     

Software approach to access UWB interference on GPS receivers

Ever since the FCC approved the use of UWB devices in commercial and federal bands, various agencies whose operations and/or products rely on the integrity of signals within certain "restricted" radio frequency bands have voiced concerns over the potential impact of the UWB interference. GPS signals are among these "restricted" bands. Several groups in the GPS community have conducted experimental studies concerning the impact of UWB interference on the performance of various grades of commercial and aviation GPS receivers. In this paper, we present a software approach to simulate and evaluate UWB interference on GPS receivers. The software approach provides greater flexibility in the design of testing scenarios, such as the inclusion of a large number of aggregated UWB devices, the generation of new UWB signals and modulation schemes, and the possibility of extending the study to new GPS signals. The paper discusses a general framework for developing algorithms to evaluate UWB and GPS interference under a wide variety of hardware and software conditions. This framework consists of three classes of components: input, processing, and analysis. The input components are responsible for the generation of UWB signal waveforms and modulation schemes, and GPS signals. The processing components include a simulated model of GPS RF front end and software implementation of GPS processing blocks, such as acquisition, tracking, and post-processing. The analysis components focus on the study of specific receiver processing component outputs. Both real and simulated UWB signals can be used in the study. The real UWB signals are primarily used to validate the simulation procedure, whereas the simulated UWB signals are used to allow the immediate incorporation of new UWB waveforms and modulations in the evaluations. This paper presents details of the software components developed and the preliminary results achieved     

基于加权网格的GPS快速静态定位方法

针对野外作业对GPS（全球定位系统）快速静态定位的实际需求提出了一种解决方法,该方法不需要进行数据预处理,只需依据DOP（精度几何因子）与定位误差之间的关系及定位点密度与真值可能位置之间的关系计算加权值,并通过加权网格快速求取GPS静态定位点。实际数据测试表明,该方法计算结果优于平均值结果及单一DOP权值和密度权值结果,该方法具有较高的精度和较强的稳定性,并具有准实时的处理时效。     

基于预估-反馈联合处理的射频噪声干扰抑制算法

针对强射频（RF）噪声干扰下脉压雷达目标检测概率较低的问题,提出了一种基于预估-反馈联合处理的射频噪声干扰抑制算法。首先,对回波信号进行盲源分离预处理,并利用分数阶傅里叶变换（FRFT）的特性对目标回波信号进行参数估计以及窄带滤波处理,滤除大部分干扰和噪声的能量;然后,在数据层运用M/N逻辑法进行点迹处理,并结合径向速度方向判决,实现对目标航迹的预估检测;最后,利用数据层对航迹状态的反馈实时修正滤波器参数,从而在信号层更好地滤除干扰能量,并对中断航迹进行剔除,完成射频噪声干扰的抑制。仿真结果表明：与现有射频噪声干扰抑制技术相比,所提算法具有更优的干扰抑制效果。     

Wideband cancellation of interference in a GPS receive array

We have demonstrated that by using an adaptive space-time array the interference from multiple, strong interferers plus multipath can be canceled down close to the noise floor without producing serious loss or distortion of a GPS signal. Design criteria are presented and limitations are examined. We also compare space-time processing with suboptimum space-frequency processing, and demonstrate by simulation that for equal computational complexity space-time processing slightly outperforms suboptimum space-frequency processing     

全球导航卫星系统的测高研究

以美国全球定位系统为代表的全球导航卫星系统具有广泛的应用领域，特点是能够在全球范围和近地空间，全天候地提供飞行器的位置、速度和时间信息。     

三频GPS改正电离层折射误差高阶项的方法

在研究电离层折射对GPS测量的影响及电离层折射误差模型的基础上,采用电离层折射误差双频改正方法,针对GPS现代化和Galileo计划中增加的第三个民用导航频率,提出了运用三频观测值将电离层折射误差改正至二阶项的方法;并系统地推导了三频载波相位观测值无电离层折射组合方程,从而进一步提高了GPS的定位精度。