共查询到20条相似文献,搜索用时 109 毫秒
1.
对某型机复合材料机翼蒙皮的结构、材料进行分析,制定了某型机机翼蒙皮的铺带制造工艺方案。通过精确铺放控制设计、同向铺带与交叉异向铺带设计、自动铺放与激光投影、自动下料技术配合使用,成功将铺带机技术应用于某型机复合材料机翼蒙皮的制造,制造出的机翼蒙皮,其无损检测内部质量合格,铺带间隙和表面质量满足设计要求,为铺带机技术在复合材料铺带的应用奠定了坚实的基础。 相似文献
2.
3.
4.
5.
自动铺带成型压力控制技术 总被引:4,自引:2,他引:4
通过对自动铺带成型工艺过程的分析,论述自动铺放过程是成型压力作用下预浸带蠕变及回复的连续动态过程。经对预浸带蠕变过程分析,采用分阶段适应性调节铺带头压力的方法保持成型压力恒定,以保证预浸带在铺放后厚度均匀。结合自动铺带CAM软件,提出一种基于铺带轨迹控制点的分段调节铺带头成型压力的控制算法,并采用UMAC (Universal Motion and Automation Controller)控制系统设计相应的控制程序,最终实现成型压力分阶段调节子控制系统的搭建。 相似文献
6.
李勇%肖军%还大军%文立伟 《宇航材料工艺》2008,38(5)
提出了一种基于两步法的复合材料锥壳螺旋向铺层自动铺带的成型方法,对锥壳螺旋向铺层几何原理进行了分析并对预浸带的预切割进行了设计和验证,对预切割装置进行了原理方案设计并利用CATIA软件进行了自动铺带验证。结果表明:两步法锥壳螺旋向铺带成型技术方案合理可行,预切割装置可以实现预浸带的切割、转录,采用通用铺带头即可以完成螺旋向铺层的自动铺带过程,采用锥壳等厚度铺叠、均匀加压和降低废料率等措施,大大提高制品质量并降低了构件加工成本。 相似文献
7.
根据柱面的结构特点,提出了面向柱面复合材料结构的自动铺带四轴联动成形方案,并以卧式自动铺带机为例进行分析。以保证铺放头压力线平行于曲面在铺放点的法线和保证铺放速度恒定为原则,根据D-H理论建立柱面固定角度铺放成形时铺带机各关节运动量的计算方法。应用逆运动学理论,对四轴联动铺带成形进行了运动学分析。从四轴联动铺带机的机构与控制、铺放速度、成形效率、方案可行性4个方面进行了深入分析,并进行可视化仿真和实验验证。结果表明应用本文方法,可实现用四轴联动铺带机完成柱面复合材料自动铺放成形,对于铺放成形效率要求不苛求的小批量实验或生产,具有低成本的突出优势。 相似文献
8.
9.
10.
11.
12.
13.
14.
介绍了磁带记录仪自动计量测试的研究设计情况,着重介绍了程控多通道信号选择器及其GPIB接口的设计,简要地介绍了自动测试软件设计情况。 相似文献
15.
16.
17.
Placement suitability criteria of composite tape for mould surface in automated tape placement 总被引:2,自引:0,他引:2
《中国航空学报》2015,(5)
Automated tape placement is an important automated process used for fabrication of large composite structures in aeronautical industry. The carbon fiber composite parts realized with this process tend to replace the aluminum parts produced by high-speed machining. It is difficult to determine the appropriate width of the composite tape in automated tape placement. Wrinkling will appear in the tape if it does not suit for the mould surface. Thus, this paper deals with establishing placement suitability criteria of the composite tape for the mould surface. With the assumptions for ideal mapping and by applying some principles and theorems of differential geometry, the centerline trajectory of the composite tape is identified to follow the geodesic. The placement suitability of the composite tape is examined on three different types of non-developable mould surfaces and four criteria are derived. The developed criteria have been used to test the deposition process over several mould surfaces and the appropriate width for each mould surface is obtained by referring to these criteria. 相似文献
18.
Lei ZU Xianzhao XIA Qian ZHANG Xiaolong JIA Huabi WANG Guiming ZHANG Jinhu LU 《中国航空学报》2022,35(4):438-449
This paper tested the viscosity of prepreg in the automatic placement process, and conducted the probe and placement-90° peel tests through the test systems. The law of variation of prepreg viscosity during the laying process was studied through these tests under different conditions by taking the peel force to intuitively and quantitatively characterise the viscosity of the prepreg.The results show that this viscosity is inversely proportional to the laying rate, proportional to the laying pres... 相似文献
19.
复合材料结构的可设计性带来大量设计变量,单靠传统方法难以实现结构优化,复合材料结构优化的铺层优化设计也是关键问题之一。从工程实际出发,探讨具有工程操作性的复合材料结构优化设计方法,形成 从结构布置优化到初始尺寸优化,再到详细铺层优化的三级优化设计方法,并在设计过程中加入符合复合材料 工艺要求的制造性约束;以某飞机复合材料垂尾翼盒结构设计为例,采用该方法对其进行优化设计。结果表明:本文提出的三级优化设计方法是适用于航空复合材料结构优化设计的一种通用方法,可降低结构质量、缩短研制周期。 相似文献