从科技论文的特点看科技论文的选题

本文论述了科技文的特点及选师原则。在特点方面主要就科技论文的科学性,创造性,理论性进行了阐述,在选题方面科技论文选题的客观需要与主条件进行阐述,旨在揭示科技论文的特点与课题选择之间的关系,从而了解其特点,并据此选题,写出符合要求的科技论文。     

某任务计算机调试设备配套软件的设计与实现

简介了任务计算机调试设备配套软件在任务计算机仿真环境中的重要作用 ,对该软件设计方法和流程进行了详细的说明 ,主要介绍了VC ++6 .0环境下串行通信和显示控制软件的设计技术 ,并讨论了如何提高应用程序性能的途径。     

Analysis of a redshifted plasma flow over a sunspot

The ultraviolet spectrum of a redshifted plasma flow appearing over a sunspot observed during the first flight of the High Resolution Telescope Spectrograph (HRTS I) is analysed, and interpreted as a radiatively cooling plasma. For most of the lines emitted from this plasma, the assumption of ionization equilibrium during the cooling is good. However for He II (and other ions with a single electron outside of closed shells), this is not the case. Integrating differential equations for the various ionization fractions of helium and the temperature allows an approximate determination of the abundance of helium relative to other elements whose lines appear in the spectrum of the plasma flow.     

Effect of a transverse plasma jet on a shock wave induced by a ramp

We conducted experiments in a wind tunnel with Mach number 2 to explore the evolution of a transverse plasma jet and its modification effect on a shock wave induced by a ramp with an angle of 24°. The transverse plasma jet was created by arc discharge in a small cylindrical cavity with a 2 mm diameter orifice. Three group tests with different actuator arrangements in the spanwise or streamwise direction upstream from the ramp were respectively studied to compare their disturbances to the shock wave. As shown by a time-resolved schlieren system, an unsteady motion of the shock wave by actuation was found: the shock wave was significantly modified by the plasma jet with an upstream motion and a reduced angle. Compared to spanwise actuation, a more intensive impact was obtained with two or three streamwise actuators working together. From shock wave structures, the control effect of the plasma jet on the shock motion based on a thermal effect, a potential cause of shock modification, was discussed. Furthermore, we performed a numerical simulation by using the Improved Delayed Detached Eddy Simulation(IDDES) method to simulate the evolution of the transverse plasma jet plume produced by two streamwise actuators. The results show that flow structures are similar to those identified in schlieren images. Two streamwise vortices were recognized, which indicates that the higher jet plume is the result of the overlap of two streamwise jets.     

Oscillations of a viscous liquid in a cylindrical container

The natural damped frequencies of a viscous liquid in a circular cylindrical container are obtained for slipping and anchored contact line at the container wall r = a. In addition the response to translational forced excitation has been determined. The results may also be applied to viscous liquid in a micro-gravity environment, as long as the contact angle of the liquid surface to the cylindrical container wall is in the vicinity of π/2, indicating, that the free liquid surface equilibrium position remains a plane surface. It could be found that there exists in contrast to frictionless liquid a small filling range, in which the liquid performs only an aperiodic motion. The adherence condition at the side wall was replaced by the somewhat weaker condition of an anchored contact line.     

Flow about a jet source with a deflector

We suggest a method to solve one of the model problems of aerohydrodynamics, namely, a problem of a flow about a point source, from which a fluid with density and total pressure, different from the corresponding values in the incoming flow enters. The calculations are carried out for various values of the determining parameter; and the data are compared with the known results. We revealed the advantages of the suggested method in comparison with the known ones.     

Impact of a cavitation bubble on a wall

Impulse action of a cavitation bubble on a rigid wall is studied depending on the distance between them. We determine the distances at which the periphery pressure maximums on a wall are preserved as well as the distances at which these maximums exceed the water hammer pressure.     

Solving a radiation problem with forward speed using a lifting surface method with a Green''s function

The progress of seakeeping computations requires development of computating codes for unsteady flows around a ship or its elements. In this paper, we present a method of calculation concerning waves radiated by an oscillating surface-piercing flat plate with forward speed, with a yaw angle. By use of Green's third identity, the problem is transformed into the resolution of a Fredholm integral equation of the first kind by a panel method using Green's function. The Green's diffraction-radiation function with forward speed is used. Its numerical values are calculated by an adaptative integration procedure to reduce the computation time. The present method permits determination of the pressure jump distribution across the plate, the total forces and moments. The results obtained are compared with other numerical methods in hydrodynamics and in aerodynamics, and with experimental data obtained in a water tank.     

Relativistic Energy-Momentum of a Body with a Finite Volume

The problem of energy-momentum in a body with a finite volume has been causing confusion in the theory of relativity, especially in relativistic thermodynamics. Its correct understanding has been given since the early years of relativity, however, erroneous misunderstandings are still found in papers and textbooks to this date. The present paper introduces a simple paradox to demonstrate the problem, and gives a brief review on a way to handle the energy-momentum correctly.     

The intersection of a Loxodrome with a great circle

The intersections of a loxodrome (rhumb line) and a great circle are of interest for some navigational problems, but a closed-form solution cannot be formulated. An algorithm is given for computing approximations to any desired degree of accuracy using Newton's method. By using the equatorial angle φ as an independent variable all solutions can be found rapidly using the modest computational capabilities of a personal computer     

直升机起落架的集成计算

直升机起落架常规计算包括停机状态计算及减缩质量计算、静态性能计算及主、尾起落架的着陆性能计算.要完成这些计算需要整机及起落架的诸多数据.在研制过程中,为了获得最优的设计,需要对起落架的各参数进行不断调整,对计算结果进行反复分析和比较,计算量较大,数据处理较为繁复耗时.详细阐述如何采用Excel和Matlab对起落架的常规计算进行集成.为完成一种直升机起落架的常规计算,采用该集成方法,编制了2000余行的M代码.在惠普Z800计算机平台下运行,耗时400余秒即可完成所有相关计算.输入输出的数据存储在同一Excel文件,文件中各项参数和计算结果数据可直接用于查阅、校对、分析,也可再编辑.     

共轴式直升机线性系统建模

应用小扰动理论和数值法,对共轴式直升机飞行动力学非线性数学模型进行线性化,获得了用于操稳特性分析和控制系统设计的共轴式直升机线性化模型.以某型共轴式直升机为研究对象,计算其稳定性导数和控制导数,结果与俄罗斯计算结果基本一致,并对研究对象的稳定性进行了初步分析.     

Magnetohydrodynamic simulation of a streamer beside a realistic coronal hole

Existing models of coronal streamers establish their credibility and act as the initial state for transients. The models have produced satisfactory streamer simulations, but unsatisfactory coronal hole simulations. This is a consequence of the character of the models and the boundary conditions. The models all have higher densities in the magnetically open regions than occur in coronal holes (Noci,et al., 1993).     

Towards a new paradigm: from a quasi-steady description to a dynamical description of the magnetosphere

A great deal of the research done on the dynamical process of the solar wind- magnetosphere interaction is based on large-scale, quasi-steady theoretical models, such as the classical reconnection model. However, it can be argued that the theoretical and observational foundations of these commonly believed paradigms are not always strong, and support for these models is sometimes weak, controversial or inconsistent. This paper discusses the need for a transition from an oversimplified quasi-steady paradigm towards a more realistic one including the dynamics of MHD waves and wave packets. The effects of localized wave packets may be most important in active plasma regions, where ideal MHD breaks down and localized, time-dependent processes become dominant. New insights into the theories of field-aligned current generation, auroral particle acceleration and the concept of reconnection may be found by including MHD wave propagation and wave packet dynamics.     

宽马赫数范围高超声速进气道转动唇口变几何方案研究

结合简单一维流理论讨论了一种工作于Ma=4～7、采用可转动唇口的变几何二元高超声速进气道设计方案,并利用数值仿真手段对其Ma=4下的自起动性能及其他不同工作马赫数下的性能进行了研究.结果表明:所设计的变几何进气道必须辅以附面层排移措施才能在Ma=4下顺利实现自起动;该变几何方案Ma=4下的流量系数达0.7以上,这为飞行器加速提供了强有力保障;与定几何进气道相比,变几何进气道高低马赫数下的总体性能均得到显著提高;此外,转动唇口的铰接位置对自起动性能有重要影响.      

超声速主流中逆向喷流流场的数值模拟

本文在差分格式NND-2基础上^[1]，提出了一个修正格式，形式简单，应用方便。从薄层近似的NS方程出发，用该格式计算了超声速主流中存在逆向喷流的钝体绕流的粘性流场，成功地捕捉到流场内的各种波系和涡系结构。计算的结果与文献[2]中的实验结果比较表明二者符合很好。     

Cage slip characteristics of a cylindrical roller bearing with a trilobe-raceway

Based on dynamic analysis of rolling bearings, the nonlinear dynamic differential equations of a cylindrical roller bearing with a trilobe-raceway were established and solved by the GSTIFF (gear stiff) integer algorithm with a variable step. The influences of structural parameters and the tolerance of the trilobe-raceway, working conditions of the bearing, and the outer ring installation method on cage slip characteristics were investigated. The results show that: (i) The cage slip ratio and bearing rating life of a cylindrical roller bearing with a trilobe-raceway would reduce when the low-radius (radius of the outer raceway contour at the lowest point) and D-value (difference value between the high and low points of the outer raceway contour) decrease, and the former (low-radius) contributes more significantly. (ii) The cage slip ratio of a cylindrical roller bearing with a trilobe-raceway rises with the increase of the bearing speed, and decreases with the increase of the radial force; the variation range increases with the increase of the low-radius. (iii) When the installation angle of the outer ring increases in a period, the cage slip ratio remains unchanged while the bearing rating life rises up a little. Therefore, when installing a cylindrical roller bearing with a trilobe-raceway, the location of the maximum radius shall be under that of the radial force to improve the bearing rating life. (iv) With the increase of the roundness of the base circle where the radius of the lowest points of the trilobe-raceway contour locates, the cage slip ratio rises gradually and the bearing rating life decreases.     

Angular Accuracy of a Scanning Radar Employing a Two-Pole Filter

A two-pole filter is proposed as a detector for a scanning radar. The optimum values of the filter coefficients are found and are approximated by a simple expression. The optimum two-pole filter requires a 0.15-dB increase in signal-to-noise ratio in order to provide the same detection capability as the optimum detector, and yields azimuth estimates whose standard deviation are within 15 percent of the Cramér-Rao lower bound. The estimator is simple to implement, avoiding the storage requirements of the moving window detector and the bias complications of the feedback integrator.     

Asymptotically Stable Motions of a Gyro in a Spinning Vehicle

An analysis of the motion of a single-axis rate gyroscope mounted in a space vehicle which is spinning with uncertain constant angular velocity xz about the spin axis of the gyro is presented. The nonlinearity in the equation of motion of the gimbal is retained. Using the Lyapunov approach, regions are obtained in the k-xz plane where k is the torsional spring constant, for asymptotic stability and for global asymptotic stability, and an estimate of the region of stability in state space is presented. Analytical relations for the selection of the gyro parameters are derived.