Delay-Doppler Ambiguity Function for Wideband Signals

The conventional ambiguity function is extended to include the Doppler distortions of the modulation function. The distinctive features of the extension are the use of the complex notation for wideband signals, and inclusion of the Doppler effect on the signal amplitude. The result is an ambiguity function from which Woodward's form can be found by inspection. It is shown that the well-known volume constraint also applies, in unchanged form, to the generalized ambiguity function. For the volume to be constant, it is not required that the distortions of the modulation function be neglected. Rather, the volume constancy is related to the sinusoidal fluctuations of a modulated carrier-type signal and thus is strictly a matter of the percentage bandwidth of the signal.     

Volume Properties for the Wideband Ambiguity Function

It is shown that the volume under the wideband ambiguity function is close to the square of the signal energy. The ambiguity volume is asymptotically conserved as the signal approaches the narrowband case. The narrowband ambiguity volume is a lower bound for the volume of the wideband ambiguity function.     

Self-Clutter Cancellation and Ambiguity Properties of Subcomplementary Sequences

In radar signal design it is well known that a fixed volume under the ambiguity surface representing signal energy can only be shifted but not eliminated in the delay-Doppler plane because of the constraint imposed by Woodward's total volume invariance. Rihaczek has shown that periodic signal repetition, though appealing to increased energy, increases the time-bandwidth product at the expense of introducing pronounced ambiguities in the delay-Doppler plane, and thus self-clutter is generated when signals are repeated in the time domain to increase energy. The undesirable self-clutter has a masking effect on targets in different resolution cells thereby limiting performance. An analysis is presented to show that a class of waveforms described in an earlier paper as the subcomplementary set of sequences which are basically repetitive and Hadamard coded, exhibit the property of cancelling self-clutter completely in the delay-Doppler plane if their ambiguity functions are combined. By this technique it is possible to repeat contiguously a basic waveform N times in a prescribed manner to increase signal energy and to cancel totally the resulting self-clutter by combining the ambiguity functions of N different repetitive waveforms which are Hadamard coded. A convenient matrix method to combine the ambiguity functions of subcomplementary sequences, which is an extension of known methods to derive the ambiguity function of repetitive waveforms, is presented. Radar implementation considerations and comparison of performance with various forms of linear frequency modulation (FM) are also discussed.     

Phase-Coded Interrupted CW Signals and Processors

High resolution radars require signals with large time-bandwidth product such as CW signal and coherent pulse train (CPT). We discuss a phase-coded interrupted CW (ICW) signal which is the combination of CW signal and CPT. Phase codes used here are with perfect periodic autocorrelation. The periodic ambiguity function of ICW signals is studied including single-carrier signal and multi-carrier signal. It is interesting that the gate function has different effects on two signals and contributes to a multi-carrier ICW signal which yields nearly perfect autocorrelation. Meanwhile we also suggest an efficient receiver approach to ICW signals, which can reduce the computational burden of the processor and utilize the good properties of P3 and P4 codes.     

Staggered Costas Signals

A radar signal, based on coherent processing of a train of staggered Costas bursts, is suggested and investigated. The selection of sequences of each burst is based on a minimum number of collocation of their individual ambiguity function sidelobe peaks. The resulting ambiguity function combines qualities of both "thumbtack" and "bed of nails" signals. Comparison with linear-FM, V-FM, and complementary phase coded (CPC) signals is given, as well as comparison with hybrid signals consisting of both phase and frequency coding.     

Radar/Sonar Signal Design for Bounded Doppler Shifts

In many detection and estimation problems, Doppler frequency shifts are bounded. For clutter or multipath that is uniformly distributed in range and symmetrically distributed in Doppler shift relative to the signal, detectability of a point target or a communication signal is improved by minimizing the weighted volume of the magnitude-squared autoambiguity function. When clutter Doppler shifts are bounded, this volume is in a strip containing the range axis on the range-Doppler plane. For scattering function estimation, e.g., for weather radar, Doppler flow meters, and distributed target classifiers, it is again relevant to minimize ambiguity volume in a strip. Strip volume is minimized by using a pulse train, but such a signal has unacceptably large range sidelobes for most applications. Other waveforms that have relatively small sidelobe level within a strip on the range-Doppler plane, as well as small ambiguity volume in the strip, are obtained. The waveforms are composed of pulse pairs that are phase modulated with Golay complementary codes.     

Optimum Signals for Radar

The research reported herein deals with the general problem of the selection of radar waveforms. The investigation is specifically concerned with the synthesis of radar signals which are optimum in the sense that they are characterized by ambiguity surfaces minimized over certain predetermined regions of the ambiguity plane. The weighted ambiguity surface is utilized as the weighted error criterion. This error criterion is mathematically tractable and pertinent to radar system performance but is not unduly restrictive as some orientation parameters are left unspecified for subsequent cost or penalty function analysis. The signal optimization is approached by variational techniques augmented by equality and inequality constraints, for example, limiting the amount of bandwidth or frequency modulation to be less than some system requirement. Several examples are presented demonstrating the optimization techniques and providing a minimum error for the stated problem. It is shown that for any given type of amplitude modulation of the radar signal, the variance or dispersion of the ambiguity surface is not decreased for any type of phase modulation added. The optimum signal for an elliptical weighting function is derived for several cases. The minimum error is shown to depend upon the constraints and the unspecified orientation parameters and, for one case, on the second moment of the signal.     

Weight effects on the periodic ambiguity function

CW radar signals and processors are discussed. The use of the periodic ambiguity function (PAF) to analyze the delay-Doppler performance of CW signals and their corresponding correlation receivers, is extended to include weight function effects. This work provides tools which can predict the delay-Doppler response of almost any phase-coded CW radar. Examples demonstrate that a combination of CW signals having perfect periodic autocorrelation, a matched reference signal with a large number of modulation periods and a smooth weight function, can create a delay-Doppler response with extremely low sidelobes, strongly resembling the response of a coherent pulse train     

Matched-Filter Responses of the Linear FM Waveform

Although the properties of the linear FM signal have been studied previously in considerable detail, such studies have involved rather narrow aspects of the theory. This paper extends the work in several respects. By presenting three-dimensional projections of the conventional ambiguity function of the linear FM signal in more detail than was available before, we can study the sidelobe behavior off as well as on the axes, without weighting, with unilateral weighting in the receiver, and with bilateral weighting. These plots reveal interesting properties related to the signal symmetry in time and frequency. The matched-filter response is then extended to include Doppler distortions of the modulation function. The results show that Woodward's ambiguity function is valid only for signals with relatively modest sophistication, even though in most practical situations one is interested only in those undistorted parts of the matched-filter response in the vicinity of the delay axis. Plots of the response are presented for various degrees of distortion, for signals with and without weighting. Lastly, we consider the effects of a mismatch in range acceleration, again for the various cases of interest. The results convey a thorough insight into the properties of chirp radar under a broad range of operational conditions.     

Design of Zigzag FM Signals

Since no practical method is available for synthesizing radar waveforms, a sizable effort has been directed into studies of the matched-filter response, or ambiguity function, of many waveforms. In this paper, we investigate the class of FM signals whose instantaneous frequency varies in a zigzag pattern. The waveforms thus consist of linear FM segments and are relatively easy to generate and process. The paper discusses the relation between the characteristics of the waveform and the features of the associated ambiguity function. The effects studied include those of signal repetition, changes in the FM slope, phase-shift and frequency-shift coding, and staggering of frequency step and segment duration. Ambiguity functions of interesting waveforms illustrate the general results. These ambiguity functions are computer-plotted projections of the three-dimensional surface above the delay-Doppler plane.     

基于二相编码的探测干扰一体化信号波形设计与仿真

如今,在信号处理技术飞速发展的背景下,针对传统的雷达信号设计暴露出的功能单一、低截获性能差以及距离速度分辨力较低等问题,构建了 1种基于十三位巴克码的探测干扰一体化信号波形。文中对其调制原理进行了分析,对其中的二相编码序列分量、伪随机码序列分量进行自相关函数特征分析,并分别从模糊函数、功率谱角度分析其探测特性和干扰特性。仿真实验证明,探测干扰一体化信号样式相较于单一调制的十三位巴克码信号具有较好的模糊函数和功率谱特性,在保持二相编码信号良好的多普勒敏感特性基础上,具有更好的距离分辨力以及更 大的干扰带宽。     

基于恒模特性的QPSK-DSSS信号扩频序列估计

 针对非合作低信噪比条件下的QPSK-DSSS信号,提出一种基于恒模特性的扩频序列估计算法。该算法首先将单用户QPSK-DSSS信号等效为两用户的BPSK-DSSS信号,其次通过对信号协方差矩阵进行特征分解,估计出由同相与正交两路扩频序列张成的二维信号子空间,最后利用扩频序列的恒模特性消除特征分解带来的酉阵模糊问题,实现扩频序列的精确估计。本文提出算法实现简单,相对目前现有传统算法具有较低的计算复杂度,而且计算机仿真表明:本文提出算法在低信噪比条件下具有优良的估计性能。     

基于功率复用的椭圆球面波函数非正交调制方法

围绕如何降低基于椭圆球面波函数的非正交调制（PSWF-NPSM）系统误码率，降低信号检测复杂度，引入调制信号功率复用思想，提出基于功率复用的椭圆球面波函数非正交调制（PD-PSWF-NPSM）方法。该方法对载波信号按子波带进行功率分配，增加了调制信号最小欧式距离，降低了系统误码率；在接收端，提出基于检测统计量的串行干扰相消信号检测方法，依据不同支路信号间功率差异，对信号进行分离、检测。理论与仿真分析表明，该方法在不降低系统频带利用率、调制信号功率谱、峰均功率比特性前提下，能够有效提高系统误码性能，降低调制信号检测复杂度；与原非正交调制方法相比，当误比特率（BER）为10^-5时，所提方法系统误码性能提升约1.7 dB。     

Synthesis Techniques for a Class of SSB-AM-PM Signals

This paper develops synthesis techniques for a particular type of single-sideband sinusoidal carrier which is phase modulated by a subcarrier. Mathematical expressions for signal efficiency, sensitivity of design to parameter variation, and ratio of peak to average power are derived and incorporated in a computer program. Given the desired power ratios for modulated signal components, the program solves for the corresponding modulation parameters and evaluates signal efficiency, design sensitivity, and peak to average power ratio. A sample signal design is presented for clarity.     

脉冲超宽带信号测量性能分析

超宽带技术是一项新兴的无线通信技术,具有极其广阔的发展前景,但目前仅用于室内短距离通信,少见用于航天测控系统。为了将超宽带技术应用于测控系统中,以模糊函数为工具,对脉冲超宽带信号的测量性能进行分析。首先推导矩形脉冲串信号和载波调制矩形脉冲串信号的模糊函数,并对其模糊特性进行仿真分析。在此基础上,主要针对用于测控系统的伪码调制脉冲超宽带信号,利用其模糊函数分析其测距测速性能。结果表明:该超宽带信号具有良好的测距测速性能,其最大无模糊距离为1个伪码周期,最大无模糊多普勒频率为脉冲重复频率的倒数;单脉冲宽度越窄,其测距性能越好而测速性能越差。     

Radiometric detection of spread-spectrum signals in noise ofuncertain power

The standard analysis of the radiometric detectability of a spread-spectrum signal assumes a background of stationary, white Gaussian noise whose power spectral density can be measured very accurately. This assumption yields a fairly high probability of interception, even for signals of short duration. By explicitly considering the effect of uncertain knowledge of the noise power density, it is demonstrated that detection of these signals by a wideband radiometer can be considerably more difficult in practice than is indicated by the standard result. Worst-case performance bounds are provided as a function of input signal-to-noise ratio (SNR), time-bandwidth (TW) product and peak-to-peak noise uncertainty. The results are illustrated graphically for a number of situations of interest. It is also shown that asymptotically, as the TW product becomes large, the SNR required for detection becomes a function of noise uncertainty only and is independent of the detection parameters and the observation interval     

基于CPLD的多路脉冲序列信号检测器设计

用VHDL语言在CPLD器件上实现了一种多路脉冲序列信号检测器,能够用七段数码管实时显示各路已检测出序列信号数目,电路各摸块用VHDL语言来描述。文章介绍了仿真信号的形成原理和电路设计方法,并给出了部分电路和仿真波形。整个多路脉冲序列信号检测器设计在一块CPLD芯片上,与其他方法设计的序列信号检测器相比,具有体积小、可靠性高、功牦低的特点。由于采用模块化的设计,对功能的修改和增加只要修改VHDL源程序,而不必更改硬件电路,从而实现数字系统硬件的软件化。     

Radar Partial Coherence Theory: An Introduction

The nature of physical phenomena is such that scattering from portions of an object, a number of objects, or clutter, is not completely unrelated; the underlying environment causes some degree of order in the phenomenon. Radar partial coherence theory describes a structure for the general target, or clutter, and its relationship to radar cross section, waveform coding, and the radar output signal. The clutter ambiguity function is introduced for extended bodies and embraces the (Woodward) ambiguity function for a point target. Due to nonlinear effects caused by partial coherence within the general target, radar signals and targets are formulated in terms of mutual coherence functions. The basic quantities describing the radar output are 1) the radar mutual coherence function (formulated in terms of the radar waveform) and 2) the target mutual coherence function which depends upon target properties, physical environment, and viewing aspect. Random noise (independent point scatterers) and partially coherent portions of reflecting bodies are made accountable in the theory. Partial coherence effects are treated as patches of reflected energy: self-coherent energy patches plus mutually coherent energy among the patches.     

低成本GNSS终端中北斗三号多频观测的分析及应用CSCD

低成本消费级GNSS芯片相较于传统测绘级接收机在体积、功耗等方面具有突出优势,在未来无人驾驶、物联网等新兴应用领域具有极大潜力。然而当前低成本GNSS芯片的观测量存在非常严重的噪声和误差,为了改善观测质量,低成本芯片正逐渐从单频向多频过渡。首先调研了目前低成本GNSS接收机对多频信号的支持情况,然后介绍了北斗三号多频观测在电离层延迟和整周模糊度估计等方面的应用。通过对真实数据的采集和分析,针对当前原始观测量存在的诸多问题,提出了具体的预处理方案,并在此基础上开展了信号强度、电离层和模糊度实验。实验结果表明,基于华为Mate 40手机的低成本GNSS方案的北斗三频电离层延迟估计误差的均值为-2.97m,三频整周模糊度估计的成功率达93.8%,相较于单频整周模糊度估计的3.11%成功率有显著提升。     

Some High-Velocity Clutter Effects in Matched and Mismatched Receivers

A generalized ambiguity function including the effects of Doppler dispersion is defined as the time cross correlation of the complex envelopes of two signals, both derived from the same basic waveform but with different delays and Doppler effects. The Doppler effects include the frequency shift and expansion or contraction of the modulation time scale. This expansion or contraction is the Doppler dispersion. While the general ambiguity function cannot be expressed directly in terms of the Woodward or undispersed ambiguity function, its squared magnitude can be expressed in terms of the Woodward ambiguity function. The relation is not simple, being an integral form. Nevertheless, since the Woodward ambiguity function is known for many signals, the relation may simplify the determination of the squared magnitude of the general ambiguity function. We consider the clutter output of a matched filter or correlation receiver where the receiver is matched to a waveform having a specific delay and specific time compression. The variance of the clutter output is the two-dimensional convolution of the clutter ``scattering function' with the squared magnitude of the general ambiguity function. This is a generalization of an earlier result which is formally the same but using the Woodward ambiguity function. This last result is generalized for a mismatched receiver. In such a case, the variance of the clutter output is the double convolution of the clutter scattering function with the cross ambiguity function of the transmitted waveform, modified by the average velocity of the clutter, and the receiver reference waveform.