半球谐振陀螺研究现状与发展趋势

半球谐振陀螺是基于哥氏效应测量角速度的新型固态陀螺,具有结构简单、精度高、功耗低、寿命长、可靠性好、抗空间辐射等优点,是捷联惯性导航系统的理想陀螺仪,在宇航领域具有独特的应用优势。半球谐振陀螺的理论精度不受量子尺寸效应限制,是高精度、微型化陀螺的重要发展方向之一。首先介绍了半球谐振陀螺的基本工作原理,其次介绍了半球谐振陀螺的发展历程,综述了半球谐振陀螺的国内外研究现状,最后对半球谐振陀螺的发展趋势进行了展望。     

我国深空探测地面站发射机的发展及展望

随着深空探测任务的发展,对地面站发射机输出功率有了越来越高的要求.在讨论了测控系统地面站发射机的国内外发展现状和应用趋势的基础上,重点分析了未来我国发射机的主要发展方向和趋势,并对其中的关键技术进行了详细描述;提出了我国未来发展深空探测地面站发射机应该开展关键技术、关键元器件或零部件的研究工作,以及一些技术发展方向性的理论研究的建议,为我国深空探测技术的发展提供了参考.     

Permanent-Magnet Linear Alternators Part 1: Fundamental Equations

Powered by free-piston Stirling engines, linear alternators are proposed for space power stations as well as for isolated domestic applications, automotive, and on-Earth solar power plants. As the literature on the subject is sparse and base-design oriented, we present the general equations for both three-phase and single-phase winding configurations having permanent-magnet field excitations.     

Applications of Brayton cycle technology to space power

The Closed Brayton Cycle (CBC) power conversion cycle can be used with a wide range of heat sources for space power applications. These heat sources include solar concentrator, radioisotope, and reactor. With a solar concentrator, a solar dynamic ground demonstration test using existing Brayton components is being assembled for testing at NASA Lewis Research Center (LeRC). This 2-kWe system has a turbine inlet temperature of 1015 K and is a complete end-to-end simulation of the Space Station Freedom solar dynamic design. With a radioisotope heat source, a 1-kWe Dynamic Isotope Power System (DIPS) is under development using an existing turboalternator compressor (TAC) for testing at the same NASA-LeRC facility. This DIPS unit is being developed as a replacement to Radioisotopic Thermoelectric Generators (RTGs) to conserve the Pu-238 supply for interplanetary exploration. With a reactor heat source, many studies have been performed coupling the SP-100 reactor with a Brayton power conversion cycle. Applications for this reactor/CBC system include global communications satellites and electric propulsion for interplanetary exploration. applications. The CBC consists of a heater, turboalternator compressor (TAC), cooler, and recuperator. A mixture of He and Xe is used as the working fluid in the CBC system. The He provides superior heat transfer characteristics in the heater, cooler, and recuperator. The Xe adjusts the molecular weight to provide superior aerodynamic performance for maximized turbine and compressor efficiency. Cycle studies are performed to select the optimum He/Xe molecular weight or He to Xe mixture ratio. The following presents the characteristics and advantages of using the CBC for space power applications, CBC development status, characteristics and applications of the CBC with each of the heat sources, and finally performance projections     

空间在轨装配技术综述

代表国家科技实力的空间站、空间望远镜、大型通信天线、空间太阳能电站、在轨燃料补给站、深空探测中转站及地外基地等空间大型平台和基础设施的建设需求日益迫切,如何对此进行智能自主建造是当前的巨大技术挑战。鉴于大型平台与基础设施在未来空间探索中的重要性,国内外航天研究机构均提出并发展了在轨装配的系列技术方案。本文主要对在轨装配研究现状和技术发展情况进行系统地综述。首先分析了有人与无人在轨装配的国内外技术进展,总结了在轨装配技术的发展路线、装配层次与方法;然后在此基础上,详细梳理了在轨装配的技术需求和应用前景,并得出在轨装配的使能关键技术——模块化技术、机器人技术和地面模拟装配技术,预期为中国未来的空间在轨装配研究提供有益的参考。     

空间机械臂技术综述及展望

介绍了国外空间机械臂在轨技术验证与工程应用的概况,从任务类型、构型配置、末端执行器与操作方式方面分析了空间机械臂技术的发展趋势。综述了空间机械臂的任务规划、系统控制、路径规划、视觉感知、末端执行器、遥操作控制及地面试验验证7项关键技术。介绍了中国试验七号与天宫二号空间机械臂在轨验证情况,重点介绍了正在研制的中国空间站机械臂基本方案。最后,总结了目前空间机械臂技术存在的问题,并对中国未来空间机械臂技术发展提出了建议。     

Thermionic/AMTEC cascade converter concept for high-efficiencyspace power

This paper presents trade studies that address the use of the thermionic/AMTEC cell-a cascaded, high efficiency, static power conversion concept that appears well-suited to space power applications. Both the thermionic and AMTEC power conversion approaches have been shown to be promising candidates for space power. Thermionics offers system compactness via modest efficiency at high heat rejection temperatures, and AMTEC offers high efficiency at modest heat rejection temperature. From a thermal viewpoint, the two are ideally suited for cascaded power conversion: thermionic heat rejection and AMTEC heat source temperatures are essentially the same. In addition to realizing conversion efficiencies potentially as high as 35-40% such a cascade offers the following perceived benefits: Survivability-capable of operation in the Van Allen belts; Simplicity-static conversion, no moving parts; Long lifetime-no inherent life-limiting mechanisms identified; Technology readiness-Large thermionic database; AMTEC efficiencies of 18% currently being demonstrated, with more growth potential available; and Technology growth-applicable to both solar thermal and reactor-based nuclear space power systems. Mechanical approaches and thermal/electric matching criteria for integrating thermionics and AMTEC into a single conversion device are described. Focusing primarily on solar thermal space power applications, parametric trends are presented to show the performance and cost potential that should be achievable with present-day technology in cascaded thermionic/AMTEC systems     

燃料电池无人机能源管理与飞行状态耦合

开展了燃料电池/锂电池（简称燃锂）混合动力无人机的能源管理与飞行状态耦合研究。综合顶层飞行任务规划与底层能源系统管理,以动力系统模型为耦合点联立能源系统与无人机运动方程,建立能源状态与运动状态耦合模型。针对燃锂混合最紧密的爬升过程,以迎角、转速和燃料电池的放电功率作为控制变量,建立了燃料消耗最小的能源管理与航迹规划耦合最优控制问题,研究不同爬升高度对最优控制过程的影响,并与模糊控制能源管理策略进行对比分析。针对大功率短时爬升和小功率长时巡航的典型任务特点,建立了燃锂最优混合问题。研究了最优的锂电池容量和燃料电池功率水平的混合量,以及爬升和巡航两阶段最优功率分配和飞行状态,分析了不同巡航目标高度对最优混合量和飞行状态的影响。结果表明：采用能源与航迹耦合的最优控制策略在给出最优功率流分配的同时,能够很好地兼顾飞行状态控制;对燃锂混合和飞行状态的综合优化可以有效地处理爬升和巡航阶段的能源需求矛盾,在给出最优燃锂混合量和飞行状态的同时,降低整个任务过程的燃料消耗。     

High energy density capacitors for space power conditioning

Several advanced capacitor designs that might be used in high average power space applications are described. Each type is fundamentally limited by breakdown phenomena. All are intrinsically limited to maximum fields on the order of 1000 MV/m. None of these units has been space rated for energy storage applications. Several problems that must be solved before use in space are presented as well as the current state of the art and estimates of developmental potential     

载人月球探测深空站布局体系

针对载人月球探测,在我国现有深空测控资源的基础上,结合其他航天组织,如NASA (National Aeronautics and Space Administration,美国国家航空航天局)、ESA(European Space Agency,欧空局)等分布在全球的深空测控资源,提出了全球深空站布局体系.该体系包括我国深空站在内的8个地面站,大体形成“南四北四,均匀分布”的格局.并以美国“重返月球”计划深空站布局为参照,对比分析了布局体系的测控覆盖、三向测量和干涉测量共视弧段,讨论了布局干涉测量不同观测站三角的测角精度,可以为后续载人月球探测任务提供支持和参考.     

New architectures for space power systems

Electric power generation and conditioning have experienced revolutionary development over the past two decades. Furthermore, new materials such as high energy magnets and high temperature superconductors are either available or on the horizon. Our work is based on the premise that new technologies are an important driver of new power system concepts and architectures. This observation is borne out by the historical evolution of power systems both in terrestrial and aerospace applications. This paper introduces new approaches to designing space power systems by using several new technologies. Two new architectures are introduced: the current source current intensive system and the articulate system. Basic characteristics of these systems have been investigated. Some aspects of the articulate system architecture, as discussed in this paper can be implemented in the short term. Flexible AC transmission systems which are now undergoing rapid development and implementation, can be regarded as a subset of the family of control methodologies which constitute the realm of articulate systems     

Conception of spacecraft centralized power supply

A reliable power supply for spacecraft is one of the central problems determining the future development of space technology. The traditional solution to this problem implies having an autonomous power plant on board each spacecraft. The most widely used are power plants with solar cells. However, there exists an alternative power supply concept of using a centralized power supply system (CPSS) and power transmission to the user satellites by laser or microwave beams. Use of a CPSS has a number of advantages. In particular, it allows the spacecraft to increase power supply level and service life as well as to decrease the spacecraft mass and cost. However, it sets new physical and technical problems associated with long distance power transmission and requires some changes in spacecraft structure and concepts. The feasibility study of CPSS development and use has to rely on existing or firmly forecastable technologies. An attempt of such an analysis has been done by a group of scientists at Moscow State Aviation Institute during 1994-1996. The very first results have already been published. This paper discusses new results obtained lately regarding a space based CPSS     

Unified Voltage and Pitch Angle Controller for Wind-Driven Induction Generator System

A unified voltage and pitch angle controller (UVPC) for a wind-driven induction generator system is presented to reach effective voltage control and to stabilize generator speed and system frequency. The proposed UVPC comprises a linear optimal controller (LOC), a supplementary voltage regulator (SVR), and a supplementary pitch angle controller (SPC). An ac voltage regulator and a dc voltage regulator are designed in the SVR to generate the desired voltage magnitude and phase angle for the voltage-sourced inverter (VSI). On the other hand, the SPC is designed based on fuzzy logic inference rules in order to generate the desired pitch angle command for the variable blade pitch such that the mechanical power can be controlled in a very efficient manner. When the system is operated in the islanding condition, an approach based on the concept of relative rotating speed has been developed for the measurement of system frequency deviation. Simulation and experimental results reveal that both bus voltage and mechanical power can be effectively controlled by the proposed UVPC for the wind energy conversion system (WECS) either connected with or disconnected from the power grid when there is sufficient wind energy.     

Space power systems requirements and issues: the next decade

Some of the more important space power technology issues, requirements, and challenges of the 1990s are described, and the impact of new component technology on the overall performance of space power systems is assessed. Advanced component, subsystem and system technologies that will significantly affect the performance, reliability, and survivability of next-generation baseload and burst mode space power systems are emphasized. Technology disciplines related to power sources (solar/nuclear and chemical), power conversion, energy storage, power conditioning/distribution and control, and waste-heat acquisition, transport, and rejection are primarily addressed. For some of them, performance trends that can be used as the basis for projecting future advanced power-system performance are developed. Performance capabilities for several different types of space power system for both baseload and burst mode applications are postulated on the basis of evolving technology and point designs that incorporate projections of advanced component capabilities     

Integration of Large Power Systems into Manned Space Stations

Essential design factors and system characteristics are explored for integration of large power systems into manned space stations. The impact of the type of power system selected upon the space station is outlined, as is the impact of the mission requirements upon the selection of power systems. Criteria for resolving the selection/application/ integration problems are provided. Comparisons between systems are based on recently defined space-station models for 90-day to five-year mission durations in the 1970' s, with four-to nine-man crews. Power systems encompass power levels from 3 to 50 kWe and include solar cell/battery. fuel cell, hybrid fuel cell/solar cell, radioisotope, and nuclear reactor systems. Thermoelectric, Brayton cycle, organic Rankine, and liquid-metal Rankine power conversion systems are considered for the nuclear energy sources. Both rigid and roll-out photovoltaic array configurations are analyzed with respect to the solar energy source.     

基于等效时间的混合储能系统高功率密度优化配置

越来越多的电力电子装置应用到多电飞机（MEA）电力系统中,导致MEA用电负荷功率呈现脉动特性,采用混合储能系统（HESS）平抑负荷功率脉动。为减少HESS重量,提出了一种高功率密度的优化配置方法。为建立负荷功率与储能介质之间的关系,提出了等效时间（ET）的概念,比较两者的ET常数作为储能系统类型选取的依据。进一步提出空间矢量法,采用能量型储能介质矢量和功率型储能介质矢量合成负荷功率,确定最优单体和截止频率,实现了HESS高功率密度配置。同时,从能量约束和功率约束两个方面进行HESS的容量的计算。最后,通过算例配置和仿真分析验证了本文所提方法的可行性和正确性。     

三站有源定位系统在远区的测量精度

对有源定位系统可同时采用路程时差测量和两端钟面时差测量的方式,从而仅用3个站即可确定出目标的三维坐标。本文研究分析了斜置L形布局的3站有源定位系统对低空定向运动目标可实现的测量精度。     

High-Definition Television System Onboard Lunar Explorer Kaguya (SELENE) and Imaging of the Moon and the Earth

The High-Definition television (HDTV) system onboard the Japanese lunar explorer Kaguya (SELENE) consists of a telephotographic camera and a wide-angle camera that each have 2.2 M-pixel IT-CCDs (interline transfer charge-coupled devices) and LSIs (large-scale integrated circuits) of the several-million-gates class. One minute-long motion pictures acquired by the HDTV system at 30 fps (frames per second) are recorded in a 1 GB semiconductor memory after compression, and then transmitted to a ground station. In the development of the space-going HDTV system, a commercial ground-model HDTV system was extensively modified and evaluated for its suitability to withstand the harsh environment of space through environmental tests. The HDTV acquired a total of 6.3 TB of movies and still images of the Earth and the Moon over the mission period that started on September 29, 2007, and ended on June 11, 2009. Footage of an “Earth-rise” and an “Earth-set” on the lunar horizon were captured for the first time by the HDTV system. During a lunar eclipse, images of the Earth’s “diamond ring” were acquired for the first time. The CCDs and the instruments used in the system remained in good working order throughout the mission period, despite the harsh space environment, which suggests a potential new approach to the development of instruments for use in space.     

微波空间定位系统及在飞行试验中的应用

介绍“微波空间定位系统”及其在飞行试验中的应用，该系统达到的定位和测速精度与电影经纬仪相近，比雷达高，便携式的ＫＤＣＣ系统，体积小，重量轻，使用维护简单，是一种具有高经济效益的飞机航迹测量系统。该系统可用于飞机性能，操稳和系统试飞的测试，也可推广用于某些制导武器的弹道测试。已成功地在飞机的飞行试验中应用。该系统的研制成功，将为提高校准精度，降低试飞成本提供一种有效的手段。     

深空测控网信息接口设计及嫦娥三号任务验证

为了对“嫦娥三号”任务以及后续月球与深空探测任务提供测控支持,我国在喀什和佳木斯分别新建了35m和66 m深空测控站,并组成了深空测控网.考虑到新建深空测控网既需要与我国现行航天测控网进行信息交互,又可以为国际上其他国家和组织的月球和深空探测器提供支持,在信息接口设计时充分参考了CCSDS（Consultative Committee for Space Data System,空间数据系统咨询委员会）、ECSS （European Cooperation for Space Standardization,欧洲空间标准化组织）等国际标准.重点介绍了中国深空测控网的信息接口设计,具体接口包括深空测控设备与深空任务中心间接口、深空运行管理中心相关接口以及干涉测量系统相关接口.该接口设计在“嫦娥三号”任务中得到了充分的验证,各类信息传输正确、及时、有效,为任务过程中的决策提供了支持.