共查询到19条相似文献,搜索用时 515 毫秒
1.
射流式旋涡发生器对弯曲扩压叶栅流场的影响 总被引:1,自引:1,他引:0
数值模拟了射流式旋涡发生器对于大折转角弯曲扩压叶栅端壁流场性能的影响.结果表明:该研究的几种具有不同参数的射流式旋涡发生器都能使弯曲叶片损失降低,正弯和反弯叶片损失减小程度最大分别达2.5%和8.8%.射流除了可为端壁附近边界层中的低能流体提供动量之外,还可以在流道中产生与通道涡旋向相反、强度相当的流向旋涡挤压通道涡,使其向远离吸力面的方向偏转,该流向旋涡在距离叶片前缘0.6倍轴线弦长附近消失.对正弯叶片,吸力面上的流动分离现象基本消失,对于反弯叶片,极大程度上降低了吸力面集中脱落涡的强度.此外,射流作用使得弯曲叶片的负荷和折转能力均增加. 相似文献
2.
为了探索缝隙射流对高负荷扩压叶栅气动性能与近壁流场结构的影响机制,实验研究了设计冲角下有/无缝隙结构的高负荷弯曲扩压叶栅近壁流场结构与出口气动损失分布规律,获得了叶片近壁压力场数据、流动图谱以及叶栅出口流动损失参数.结果表明,缝隙两端压差导致的从叶片压力面到吸力面的射流能够增加附面层高熵流体的能量,缝隙射流将局部积聚的低能流体及时引向主流,减小高熵流体在叶展中部或端区掺混撞击,抑制了栅后尾迹高熵流体的过度聚集,从而有效提高高负荷压气机叶栅气动性能. 相似文献
3.
4.
5.
以某多级氦涡轮第一级为研究对象,借助数值模拟技术对低展弦比涡轮动静叶端壁通道涡迁移及干涉机制进行研究,并考察了叶片弯曲对涡轮气动性能的影响。结果表明:受下端壁道涡影响,导叶出口近叶根处气流过偏转,导致转子前缘近轮毂区正攻角变大;叶片根部负荷增加,致使马蹄涡压力面分支与吸力面分支交点前移;下端壁通道涡径向迁移至近叶顶区,其与叶尖泄漏涡相互影响致使叶顶区粘性损失显著增加。弯叶片对低展弦比大折转涡轮叶片的作用效果与传统涡轮具有明显差别:叶片正弯时叶顶载荷减小,导致叶顶间隙泄漏涡与通道涡强度及损失显著减小,涡轮性能得到改善;叶片反弯时叶顶载荷增加,致使叶尖泄漏损失增大,且强径向压力梯度作用下下端壁低能流体向叶顶汇聚,损失显著增加。 相似文献
6.
为了研究不同抽吸形式对压气机内部分离流动的控制效果和机理,基于数值模拟方法,对内部同时存在角区分离和附面层分离的直列叶栅进行抽吸计算,共设置8套不同的方案进行了详细的探究。结果表明:对于控制分离的效果和机理,不同抽吸形式之间存在着一定差异;在分离发展的不同阶段,实施抽吸对其控制效果也有所不同。近端壁吸力面抽吸方案SS3同时减小了角区分离和近端壁处的尾缘附面层分离,尾部近吸力面沿展向静压分布为正"C"型,使角区内的低能流体向叶中流动,角区流动得到改善,但导致叶展中部流场的恶化;端壁抽吸和全叶高组合抽吸则使尾部近吸力面静压沿展向分布更均匀,低能流体的迁移现象减弱。基于以上结果可得:组合抽吸可以更有效地控制叶栅内部流动分离,降低损失,提高叶栅流通能力。 相似文献
7.
8.
涡轮叶栅端壁区流动的实验研究 总被引:1,自引:0,他引:1
本文在大尺寸低速开式叶栅传热风洞中对一种高压涡轮导向叶栅中的流场进行了实验研究。采用五孔针对5个雷诺数下的叶栅端壁区三维流场进行了测量,并用线簇和小球浮动法对5个工况的流动进行了流场显示。实验结果表明:马蹄涡压力面分支在向吸力面运动的过程中,破坏了来流附面层的结构,在马蹄涡压力面分支之后,叶栅通道中产生了一个新的从压力面到吸力面的新附面层,新附面层的厚度小于来流附面层厚度;三维流动区约占叶栅通道的40%;雷诺数的增大将增强端壁区的三维流动。从流场显示图片可以观测叶片吸力面靠近端壁的角涡形成与发展,以及吸力面上的三角形区域;流场显示的通道涡大小与流场测量结果吻合。本文的实验结果有助于分析端壁表面和叶片表面换热特性的形成机理。 相似文献
9.
10.
11.
Based on the investigation of mid-span local boundary layer suction and positive bowed cascade, a coupled local tailored boundary layer suction and positive bowed blade method is developed to improve the performance of a highly loaded diffusion cascade with less suction slot. The effectiveness of the coupled method under different inlet boundary layers is also investigated.Results show that mid-span local boundary layer suction can effectively remove trailing edge separation, but deteriorate the flow fields near the endwall. The positive bowed cascade is beneficial for reducing open corner separation, but is detrimental to mid-span flow fields. The coupled method can further improve the performance and flow field of the cascade. The mid-span trailing edge separation and open corner separation are eliminated. Compared with linear cascade with suction, the coupled method reduces overall loss of the cascade by 31.4% at most. The mid-span loss of the cascade decreases as the suction coefficient increases, but increases as bow angle increases. The endwall loss increases as the suction coefficient increases. By contrast, the endwall loss decreases significantly as the bow angle increases. The endwall loss of coupled controlled cascade is higher than that of bowed cascade with the same bow angle because of the spanwise inverse ‘‘C" shaped static pressure distribution. Under different inlet boundary layer conditions, the coupled method can also improve the cascade effectively. 相似文献
12.
13.
压气机通道端壁附面层区叶片载荷分布研究 总被引:1,自引:0,他引:1
为了探索叶片载荷分布对端壁附面层区流动的影响,设计出3套平面叶栅,叶片载荷分别趋前、居中和靠后。对于低速流动,采用实验和三维Navier-Stkoes方程方法对叶片表面、叶栅出口流场进行了研究。研究表明:叶片载荷靠后叶片(No.3)性能较叶片载荷趋前(No.1)和居中(No.2)叶片差;No.2叶片与No.1叶片比较,出口损失小,但落后角较大,扩压能力较小;在进口端壁附面层一定时,叶片前缘附近的端壁附面层区叶片力亏损变化与叶片力变化呈正相关;端壁面与叶片吸力面之间构成的角区内角涡,没有造成靠近后缘端壁附面层区吸力面静压明显下降。 相似文献
14.
高负荷叶片弯曲对壁面流动的影响 总被引:2,自引:0,他引:2
测量了低展弦比高负荷涡轮直叶片和正、反弯叶片叶栅端壁和叶片表面静压及流道内损失沿流向的发展, 并对端壁和叶片吸力面上的流动进行了墨迹显示。实验结果表明:叶片正弯增大了叶栅进口段逆压梯度, 并在叶片吸力面前部形成反“C”型静压等值线, 加剧了叶片前缘的鞍点分离和吸力面分离线向叶栅中部的收敛。叶片反弯减小了叶栅进口段逆压梯度, 在吸力面进口形成垂直于端壁的静压等值线, 不仅削弱了鞍点分离, 而且造成吸力面上的自由涡层型分离, 避免了吸力面上、下分离线相交, 因此二次旋涡损失大为降低。 相似文献
15.
Effects of Boundary Layer Suction on Aerodynamic Performance in a High-load Compressor Cascade 总被引:1,自引:0,他引:1
This article is aimed to experimentally validate the beneficial effects of boundary layer suction on improving the aerodynamic performance of a compressor cascade with a large camber angle. The flow field of the cascade is measured and the ink-trace flow visualization is also presented. The experimental results show that the boundary layer suction reduces losses near the area of midspan in the cascade most effectively for all suction cases under test. Losses of the endwall could remarkably decrease only when the suction is at the position where the boundary layer has separated but still not departed far away from the blade surface. It is evidenced that the higher suction flow rate and the suction position closer to the trailing edge result in greater reduction in losses and the maximum reduction in the total pressure loss accounts to 16.5% for all cases. The suction position plays a greater role in affecting the total pressure loss than the suction flow rate does. 相似文献
16.
17.
18.