直流电弧喷射等离子体炬阳极喷嘴积碳现象的研究

采用高功率直流电弧等离子体喷射化学气相沉积工艺,制备了不同厚度的自支称金刚石厚膜.实验发现,等离子体炬阳极喷嘴积碳是沉积过程中最突出的问题之一.从理论和实验两个方面研究了阳极积碳产生的原因,并通过激光拉曼光谱分析了碳球的结构和成分.结果表明,碳球由金刚石层、混合层和最外面的石墨层构成.详细分析了甲烷浓度、冷却水温度、放电电弧的局部高温、阳极喷嘴的表面质量对积碳形成的影响,并提出了改进措施.     

轴向受载的高速球轴承的拟动力学分析

提出了对仅受轴向载荷的高速球轴承进行拟动力学分析以掌握滚动元件运动特性的方法。首先确定了钢球和套圈的滚动速度以及套圈相对于钢球的滑动速度，建立了各滚动元件的润滑模型，阐述了建立高速球轴承运动特性分析基本方程的一般原理。通过求解这些基本方程可得到高速球轴承中各滚动元件的运动状态、受力情况、弹流油膜厚度和疲劳寿命，从而可确定高速球轴承不打滑的最小轴向力。     

考虑保持架间隙碰撞的球轴承-机构系统动力学分析

基于套圈滚道圆环的几何结构方程,建立了钢球和套圈的三维动态接触关系.考虑钢球和保持架的间隙碰撞作用,建立球轴承-曲柄滑块机构系统多体接触动力学模型.运用广义-α方法计算分析了不同转速、径向游隙和保持架兜孔半径间隙下球轴承-机构系统的运动精度和动力学特性,获得球轴承-机构系统的动态误差、套圈中心的相对运动轨迹、保持架中心的运动轨迹和动态作用力等动力学响应.计算结果表明:随着转速和球轴承径向游隙的增加,约束反力、系统动态误差、套圈中心的相对运动轨迹、保持架与套圈中心的相对运动轨迹、球轴承内部的作用力、钢球与保持架的间隙碰撞力均增加.随着保持架兜孔半径间隙的增加,保持架与套圈中心的相对运动轨迹、钢球与保持架的间隙碰撞力和钢球打滑均增加.      

Preparation and Microstructure of Cu/Ti_3SiC_2 Nanocomposite

Mixed micron-sized Cu/Ti3SiC2 (vol5%) powder was mechanically milled using agate balls and zirconia balls separately. Then followed an examination of it with the FEI-SEM. The experimental results show that, distributed homogenously in Cu matrix, the Ti3SiC2 particles have a size of about 30-50 nm after milled with agate balls for 8 h, while it remains approximately unchanged after milled with zirconia balls. The microstructure of the mixture at different ball-milling stages was also studied. Bulks of Cu/Ti3SiC2 nano-composite were fabricated by hot pressing nano-sized Cu/Ti3SiC2 powder at the temperature of 1 073 K under 100 MPa. Then came an investigation of the effects of the particle size and agglomerate state of Ti3SiC2 as well as the microstructure of Cu/Ti3SiC2 nano-composite. It was found that the nano-sized Ti3SiC2 particles distribute evenly in copper.     

大尺寸弹丸喷丸成形2024-T351铝合金表面质量研究

针对2024-T351铝合金进行直径3mm大弹丸喷丸成形及直径0.58mm小弹丸喷丸强化试验,观测试样在不同喷丸参数下的表面形貌,并对表层显微硬度及残余应力分布进行测试,为整体壁板喷丸成形的工艺设计提供重要依据。     

Exploration and implementation of commonality valuation method in commercial aircraft family design

Commercial aircraft family design can reduce development costs, shorten development cycles, and expand the market coverage of aircraft. Commercial aircraft family development has become one of the most important features of modern aircraft design. This paper explores the effects of commonality on different aircraft models in a commercial aircraft family. The existing product commonality indexes are summarized and their limitations in the application to aircraft design are discussed. Then a new component commonality index is proposed based on the component decomposition structure. A model for calculating the aircraft program value is established,which considers development costs, manufacturing costs, sale price, operation costs and residual costs. The effects of aircraft commonality on time and economic costs of both development and manufacturing, and on sale price, are analyzed and quantified. The commonality evaluation strategy is obtained, which features comprehensive consideration of the aircraft program value and time costs. The break-even analysis of aircraft is proceeded on the basis of costs and price data. By using a real option method, the strategy considers the uncertainty of the aircraft program and the flexibility of the manufacturer. This strategy proves to be rational and applicable to aircraft design based on the calculation of three examples and the analysis of parameter sensitivity.     

On the stability of flexible aircraft

The problem of aircraft stability has been a subject of concern since the beginnings of flight. Traditionally, aircraft stability has been treated within the confines of two separate disciplines, namely, flight dynamics and aeroelasticity. Based on some recent developments in the dynamics and control of flexible aircraft, this investigation uses the system concept to provide a broader approach to aircraft stability in an attempt to bridge the gap between stability as understood in flight dynamics and stability as envisioned in aeroelasticity. To this end, stability is studied in the following four cases: 1) dynamics of whole flexible aircraft using the unified formulation, 2) flight dynamics of quasi-rigid aircraft (aircraft treated as rigid), 3) aeroelasticity of flexible components, such as cantilever wing, cantilever horizontal stabilizer, etc., and 4) aeroelasticity of restrained flexible aircraft (aircraft fixed to a point, hence, having no rigid body degrees of freedom). The paper also presents a method to address the stability of flexible aircraft when the compressibility correction factor is known only at some discrete Mach numbers.     

风雨对飞机飞行安全性的影响

风雨严重影响飞机的飞行安全。基于动量定理建立了一种根据降雨条件、风场特性、飞机特征和飞行状态计算雨滴对飞机产生的撞击力和力矩的方法,研究了风雨对飞机气动特性的影响,进而建立了飞机在风雨中飞行的运动方程。通过引入驾驶员的操纵模型,对飞机在风雨中飞行的运动特性进行了数值仿真研究。仿真结果表明:降雨会使飞机的升力减小,阻力增大,平衡迎角增加,不利于飞机的飞行安全;当降雨过程中伴随有风时,风会改变飞机的飞行迎角,使得飞机更容易出现因失速而造成的飞行事故;降雨时飞机的抗风能力降低。     

基于可达集方法的结冰飞机着陆阶段安全风险评估

飞机在着陆过程中极易发生结冰的现象,结冰对飞行安全造成的危害极为严重。结冰导致飞机发生危险的原因是由于机翼或尾翼被冰层覆盖后空气动力学行为发生改变,飞机受力异常难以控制。为分析结冰后飞机的稳定性以保证飞行安全,以飞机纵向动力学系统为分析对象,将飞机结冰后状态的描述以可达集的形式进行,直观地判断飞机状态是否可控,以此确定飞机是否处于安全状态。以求解所得的可达集为基础,利用极值定理分析结冰飞机的风险概率模型,由模型计算不同情况下飞机的风险概率,最终得到飞机着陆阶段的安全风险评估结果,并由评估结果指导驾驶员操纵,从而保证飞机的安全飞行。     

舰载机全机落震试验方法

舰载机全机落震试验是在实验室环境下测试舰载机着舰时结构动态载荷、动态响应以及机载设备冲击环境下功能可靠性的重要试验手段。本文提出了舰载机全机落震试验的试验方法,并对试验过程中机翼升力模拟、试验件下沉速度控制、试验件航向速度模拟及机体动态载荷测试等试验过程中的关键技术问题提出了解决方案,并通过试验对技术方案进行了验证。最后通过全机落震试验系统验证了试验方法的可行性及有效性,为舰载机着舰动态载荷及响应的测试提供了可行的试验方法,并为舰载机研制提供可靠的试验数据。     

作战飞机的空-地攻击效能评估

用概率方法建立了描述单一飞机在威胁环境中攻击一个地面被动目标的数学模型,导出飞机对地攻击作战的任务成功率、目标被击毁率和飞机损失率等效能的表达式,给出用于效能评估的有关事件发生概率的计算公式,通过计算实例讨论了作战飞机空－地攻击效能的各种度量。     

Data communications concept for a SATS scenario

The small aircraft transportation system (SATS) concept envisions doorstop to destination transportation in a safe and timely manner. Data communications are a key component in achieving the aviation-related operational performance improvements that are sought. However, data communication doesn't start when you get into the aircraft; it starts back at the location where the flight is planned. In fact, data communications support the pilot in all phases of the flight: flight planning, pre-flight, departure, en route, transition, approach, landing, and rollout as well as for a missed approach. The Internet is being used to perform flight planning activities, and the mobile communications available today support Internet access en route to the departure airfield. On-board the aircraft, data communications provide surveillance and air traffic control (ATC) support to the pilot. The location of other aircraft is available to the pilot and ATC system through automatic dependent surveillance-broadcast (ADS-B) and traffic information service-broadcast (TIS-B) applications that transmit the location of other aircraft in the vicinity. Other aircraft locations are used to forecast potential conflicts and, thus, enhance flight safety. As the aircraft nears a SATS-equipped airfield, the pilot uses data link messages to request a landing sequence. The airport management module (AMM) provides a landing sequence assignment to the aircraft. As the pilot maneuvers the aircraft for a landing, he/she is using data-linked surveillance data to determine the location of other aircraft and maintain a safe separation distance between aircraft even in a low visibility environment.     

军用飞机生存力研究中的易损性分析

易损性的高低是评价生存力设计的一项重要指标。本文从易损性出发,明确建立一套计算、评估、分析飞机易损性的方法,并结合该方法,建立某型飞机的易损性分析模型,进行实例计算分析。通过计算分析,给出降低飞机易损性措施的建议,同时针对所存在的问题,提出个人的看法。     

翼身融合布局飞机机体-发动机气动干扰效应

翼身融合（BWB）布局飞机是一种相对较新的飞行器概念,具有商业运输飞机的潜在用途。研究表明,翼身融合布局客机可获得比常规布局客机更好的性能。但是,由于各方面限制,BWB飞机不宜使用传统的机翼安装或机身安装的发动机布局,发动机背部安装成为首选布局。然而,背部安装发动机容易产生激波、分离、进气畸变等空气动力干扰问题,发动机与机身一体化的气动设计已成为BWB飞机发展的关键技术。针对BWB布局飞机的机体和发动机之间的气动干扰进行了数值研究,结果表明,背部安装发动机对BWB布局飞机的全机气动特性和发动机本身的推力性能都会产生较为明显的影响。     

Structural mass prediction in conceptual design of blended-wing-body aircraft

The Blended-Wing-Body (BWB) is an unconventional configuration of aircraft and considered as a potential configuration for future commercial aircraft. One of the difficulties in conceptual design of a BWB aircraft is structural mass prediction due to its unique structural feature. This paper presents a structural mass prediction method for conceptual design of BWB aircraft using a structure analysis and optimization method combined with empirical calibrations. The total BWB structural mass is divided into the ideal load-carrying structural mass, non-ideal mass, and secondary structural mass. Structural finite element analysis and optimization are used to predict the ideal primary structural mass, while the non-ideal mass and secondary structural mass are estimated by empirical methods. A BWB commercial aircraft is used to demonstrate the procedure of the BWB structural mass prediction method. The predicted mass of structural components of the BWB aircraft is presented, and the ratios of the structural component mass to the Maximum TakeOff Mass (MTOM) are discussed. It is found that the ratio of the fuselage mass to the MTOM for the BWB aircraft is much higher than that for a conventional commercial aircraft, and the ratio of the wing mass to the MTOM for the BWB aircraft is slightly lower than that for a conventional aircraft.     

民用飞机直接维修成本分配模型研究

降低民用飞机直接维修成本是提高飞机经济性、增强市场竞争力的重要途径。以民用飞机研制阶段在很大程度上决定其维修成本的高低为背景,在分析相关文献研究成果的基础上,构建可反映民用飞机成本特性的设计参数结构层次图,基于 TOPSIS-灰色关联法计算类似机型的相对相似度,进行民用飞机直接维修成本分配;将类似机型典型系统直接维修成...     

基于DATCOM的飞机初步设计

为减少飞机设计过程中的不必要的硬件更改，提出了飞机初步设计阶段基于模型的设计思路。通过一个1/4风笛手J-3幼兽无人机的实例，说明如何通过DATCOM优化一个飞机结构设计、计算出气动特性，并提前分析所选择特定结构外形的飞机起飞着陆等性能，以提前预估所设计的飞机是否能够满足或基本满足设计要求。分析表明，基于模型的设计过程能够在一种快速可重复的模式下进行，能够很好控制飞机设计过程中的成本。     

SVSS: Intelligent video surveillance system for aircraft

Safety and security are the most discussed topics in the aviation field. The latest security initiatives in the field of aviation propose [1I] the aircraft carriers to implement video surveillance within the aircraft at strategic locations. The current proposals allow the video surveillance data to be stored within the aircraft and monitored by one of the flight crew. The monitoring crew will be responsible for identifying the anomaly within the aircraft and take necessary preventive actions. With the introduction of additional technology within the aircraft, mere human perception may not be sufficient to make a decision. In this research work, the authors explore the possibility of implementing a smart video surveillance system (SVSS) within the aircraft that is tuned toward detecting the behavioral anomaly within the aircraft. The SVSS will generate security triggers when it detects an anomaly within the aircraft. These triggers could be combined with other triggers generated by different aircraft components (possible alarms from the flight crew, data traffic anomaly, or alarm generated by one of the avionics components) to provide a better understanding of the situation to the monitoring crew.     

飞机战伤抢修评估与设计方法综述

飞机战伤抢修（ABDR）是提高飞机生存力与作战能力的重要手段之一，开展战伤抢修技术研究覆盖飞机全寿命阶段。回顾了战伤抢修研究的历史和现状，分别从战伤评估、战伤抢修设计、战场维修与保障等3方面总结了战伤抢修体系要点，重点综述了战伤抢修预评估技术、战伤现场评估技术、战伤抢修设计准则与原则、战伤抢修设计与评价方法、战场快速维修技术、战场保障方法等方面的理论与研究进展。在此基础上，针对未来体系对抗与智能化作战环境，结合目前战伤抢修需求，提出了包括先进材料结构飞机战伤抢修技术、直升机战伤抢修技术、飞机战伤评估智能技术等战伤抢修技术研究需要关注和解决的问题。     

平尾积冰对飞机纵向气动参数的影响

建立飞机纵向动力学模型,基于最大似然参数估计原理,设计用于辨识飞机纵向气动参数的辨识系统,并对辨识系统的正确性和精确度进行了验证.以DHC-6飞机飞行试验数据为依据,对未积冰飞机和两种平尾积冰冰型的飞机进行纵向气动参数辨识,通过对比3种情况下飞机纵向气动参数的辨识结果,定量分析了平尾积冰对飞机纵向气动参数的影响.结果表明:平尾积冰将导致飞机纵向气动特性恶化,俯仰阻尼可减小15％,升降舵效率可降低20％,对飞行稳定性、操纵性以及飞行安全构成一定的威胁.